ULX-D™ Digital Wireless Systems
Uncompromising
Digital Wireless
BREAKTHROUGH TECHNOLOGIES
ULX-D™ Digital Wireless represents an incredible advancement in wireless performance. Shure innovation brings to market new features and technologies that dramatically increase spectrum efficiency, dependability, and signal routing convenience.
High Density Mode
Specifically designed for high channel count applications, High Density mode optimizes the system by running at 1mW RF transmit power and reducing the modulation bandwidth. The result is nearly three times the number of useable frequencies.
•Enables up to 47 ULX-D systems in an open 6MHz TV channel
•Channels can be tuned directly adjacent to each other in 125 kHz steps
•Operates with a range of up to 30 meters (100 ft) with line of sight
Center |
589.8050000 MHz |
Actual spectrum scan of 47 channels over 6 MHz
Digital Audio Networking Over Ethernet
Dante is a total solution for transporting low latency uncompressed audio over standard IP Ethernet networks with sample accurate synchronization, automatic device discovery, and easy to use signal routing.
•Send multichannel audio from ULX-D receivers to Dante-equipped mixers over a single ethernet cable
•Auto-discovery and easy audio networking with Dante Controller
•Compatible with ULXD4D & ULXD4Q receivers
Bodypack Frequency Diversity
Frequency Diversity enhances the value of "double-packing" - sending the same audio from two transmitters with different radio frequencies. If problems occur with the reception of one frequency, ULX-D dual and quad receivers continue to provide flawless audio by automatically switching to the clean frequency.
•Safeguards against loss of audio signal caused by RF interference or by power loss in a transmitter
•Switching between channels occurs in milliseconds, without interruption to the audio signal
•Selectable option in ULXD4D & ULXD4Q receivers