Shure UHF-R WIRELESS Specifications

Wireless Receiver With Audio Reference Companding

UR4D+

SYNC

RF Audio

XX YYY-ZZZ MHz Navigate RF

Audio

XX YYY-ZZZ MHz

Navigate

Control

push

Monitor

Monitor Clip

push

1 2

POWER

ENTER

EXIT

POWER

Monitor

Monitor Clip

push

OFF

Control

push

Navigate

XX YYY-ZZZ MHz

Audio

Wireless Receiver With Audio Reference Companding

UR4S+

SYNC

ENTER

EXIT

UR1

UR2

UR4S+

UR4D+

Q10 740-798 MHz

H4 518 - 578

DESCRIPTION

The UHF-R is a professional, wireless technology engineered for the most demanding touring environments and installations.



wireless systems offer unprecedented flexibility and versatility. Using multiple

UHF-R frequency bands, up to160 compatible systems can be used simultaneously. Individual frequency bands deliver up to 60 compatible systems per band. The UHF-R also includes infrared synchronization that allows you to configure tran smitter settings from the receiver. With multiple system operation and interchangeable components, UHFR systems also offer a choice of Single or Dual Channel Diversity Receivers.

SYSTEM FEATURES

Shure UHF-R Wireless Systems offer many exceptional features, including:

Auto Frequency Selection/Scan

• Locates a clear channel instantly

Auto Transmitter Sync

• Infrared (IR) sync automatically synchronizes the transmitter and receiver

Networking

Each receiver has an RJ-45 port on the back that lets you connect to an Ethernet network. Networking receivers provides the following benefits:

• Makes channel setup faster and easier

• Allows you to monitor and control multiple receivers using the Shure Wireless Workbench PC Software

RF Distribution Ports

Use the RF distribution ports to share the signal from a single pair of anten nas with up to 10 single or dual receivers within the same frequency band. The RF ports eliminate the need for antenna splitters or distribution amplifiers. Active circuitry minimizes insertion losses, preserving signal quality. Input fil tering keeps the sig nal free from outof-band interference. Distribution circuitry is active only when a dditional receivers are connected to the RF distribution ports. W hen not used, the port circuitry is byp assed, allowing the receiver to be used as a stand-alone component.

Shure’s Wireless Workbench Software

Key benefits of current Wireless Workbench software include:

• Fast network setup of large groups of wireless systems:

• Scans current RF environment.

• Plots RF history, using an individual transmitter to identify potential areas of weak signals and dropouts.

•Remote monitoring and control of multiple wireless systems.

• Wireless Workbench provides faster setup and more complete control.

• Automatic Frequency Selection Wizard: Will scan and select open frequencies, applying them to all Shure UHF-R receivers in network (and ultimately to connected networks of current UHF series receivers as well).

• Comprehensive Infra-Red (IR) Auto Sync/Automatic Transmitter Setup: PC control of transmitter sync with corresponding receiver. Syncs frequen cy, lo ckou ts, po wer setting, custom groups.

• Frequency Compatibility Calculator Wizard: By scanning the RF environment and then considering all networked hardware models, Wireless Workbench recommends frequencies for all specified wireless systems (including PSM systems, and competitive product). While this feature has a proprietary slant, a generic hardware “template” will be available for those users who insist on networking with non-Shure products)

• The Band Limiting feature allows manufacturer or service center to set Network frequency band parameters, to align with any country/regional RF usage guidelines that might conflict with the available bandwidth.

• Custom Frequency Group Creation allows customization of frequency groups to be used in specific locations. May require advanced wireless aptitude, or assistance from Shure’s Applications departments.

UHF-R Wireless

System Specifications

Shure’s patented Audio Reference Companding

• Delivers a crystal clear audio transmission, superior to conventional wireless technology

UR4S+ & UR4D+ DIVERSITY RECEIVER FEATURES:

• Up to 2,400 selectable frequencies across up to 60 MHz bandwidth

• Track Tuning Filtering Technology (on all 60 MHz or greater products).

• Up to 40 preset compatible systems/band (up to 160 with multiple bands).

• Network Automatic Frequency Selection

• Automatic Transmitter sync (including custom Group Upload)

• Flash memory to store six 60-channel custom frequency groups

• Shure’s Patented Audio Reference Companding

• Multi-function bit-mapped backlit LCD

• Built-in USB & Ethernet network Control/Monitoring

• AMX/Crestron Compatible

• Remoteable 1/2 wave antenna

• Temperature-activated fan ensures top performance in high temperature environments. Clean fan screen as needed to remove dust.

• MARCAD



diversity

HANDHELD AND BODYPACK TRANSMITTERS FEATUR ES

• Switchable RF Power (10/50 & 10/100 mW), country dependent

• Low profile, compact bodypack design

• Frequency and Power Lockout

• Bit-mapped Backlit LCD

• 2 AA Batteries - Up to 9.5 hours continuous use (low power)

• Automatic Transmitter Setup

• All-metal die-cast construction

• Light-weight magnesium bodypack

• Flexible bodypack antenna

• Reversible Belt Clip

UHF-R™ Wireless System Specifications

Frequency Range and Transmitter Output Power

Band Range Transmitter power (Nominal mW)

Handheld Bodypack

G1 470-530 MHz 10 / 50 10 / 100

G1E 470-530 MHz 10 / 50 10 / 50

H4 518-578 MHz 10 / 50 10 / 100

H4E 518-578 MHz 10 / 50 10 / 50

J5 578-608, 614-638 10 / 50 10 / 100

J5E 578-638 MHz 10 / 50 10 / 50

K4E 606-666 10 / 50 10 / 50

L3 638-698 MHz 10 / 50 10 / 10 0

L3E 638-698 MHz 10 / 50 10 / 50

Q5 740-814 MHz 10 / 50 10 / 50 R9 790-865 MHz 10 / 50 10 / 50

Q6 740-752 MHz 10 10 A24 779-788 / 797-806 MHz 10 10 JBX 806-810 MHz 10 10

Q10A 740-798 MHz 10 / 50 10 / 50

R16 794-806 MHz 10/50 10/50 R18 794-806 MHz 10 Only 10 Only

X1 944-952 MHz 10/50 10/100

This Radio equipment is intended for use in musical professional entert ainment and similar applications.

This Radio apparatus may be capable of operating on some frequencies not authorized in your region. Please contact your nat ional authority to obtain information on authorized frequencies and RF power levels for wireless microphone products.

NOTE

TL1067 (Rev. 4)

Printed in U.S.A.

RF Carrier Frequency Range

470-952 MHz, depending on region

Working Range

UR1, UR2:150 m (500 ft.), under typical conditions

NOTE: Actual working range depends on RF signal absorption, reflection and

interference

Audio Frequency Response

40 – 18,000 Hz,(+1 dB, –3 dB).

500 m (1600 ft) line-of-sight, outdoors for a single system

NOTE: Overall system frequency response depends on microphone e lement Gain Adjustment Range

UR1: –20 to +35 dB UR2:

–10 to +20 dB

Modulation

FM (45 kHz max. deviation), compander system with pre- and de-emphasis

RF Power Output

See table above.

Dynamic Range

>105 dB, A-weighted

Image Rejection

>110 dB typical

RF Sensitivity

UR4S+ UR4D+

–110 dBm Typical 12 dB SINAD

–105 dBm Typical 30 dB SINAD

Spurious Rejection

>90 dB typical

Ultimate Quieting (ref. 45 kHz deviation)

>100 dB, A-weighted

Signal Polarity

Positive pressure on microphone diaphragm (or positive voltage applied to tip of

System Distortion (ref. ± 45 kHz deviation, 1 kHz modulation)

<0.3% Total Harmonic Distortion typical

Power Requirements

UR1, UR2: Two 1.5V AA batteries UR4: 100 to 240 Vac, 50/60 Hz

Current Drain

UR1, UR2: 180 mA max. (normal RF power setting) UR4D+, UR4S+: 0.8 Amps max.

Battery Life (Typical)

UR1, UR2: 9.5 hours (low power)

6 hours (high power)

Operating Temperature Range

–18° to +57° C (0° to +135F)

NOTE: Battery characteristics may limit this range NOTE: Electrical safety approval is based on a maximum ambient

temperature of 35°C (95°F).

Overall Dimensions

UR1: 98 mm L x 60 mm W x 17 mm D (3.84 x 2.38 x 0.66 in.) UR2/SM58: 261 mm L x 51 mm Dia. (10.27 x 2 in.) UR2/SM86: 261 mm L x 51 mm Dia. (10.27 x 2 in.) UR2/SM87A: 254 mm x 51 mm Dia. (10 x 2 in.) UR2/BETA 58: 258 mm L x 51 mm Dia. (10.15 x 2 in.) UR2/BETA 87A,

UR2/BETA 87C: 254 mm x 51 mm Dia. (10 x 2 in.)

UR2/KSM9/BK,

UR2/KSM9/SL: 250 mm x 49 mm Dia. (9 7/8 x 15/16 in.)

UR4S+/UR4D+: 44 mm H x 483 mm W x 366 mm D (1.72 x 19.00 x 14.39 in.)

Net Weight

UR1: 97 g (3.4 oz.) without battery UR2/SM58: 356 g (12.6 oz.) without battery UR2/BETA 58: 314 g (11.1oz.) without battery UR2/SM86: 317 g (11.2 oz.) without battery UR2/SM87A: 298 g (10.5 oz.) without battery UR2/BETA 87A,

U2/BETA 87C: 325 g (11.5 oz) without battery

UR2/KSM9/BK,

UR2/KSM9/SL: 410 g (14.4 oz.) without battery) UR4S+: 4.8 kg (10.6 lbs) UR4D+: 5.0 kg (11.0 lbs)

WA302 phone plug) produces positive voltage on XLR output pin 2 with respect to XLR pin 3 and on the tip of the 1/4-inch output jack.

240 mA max. (high RF power setting)

–107 dBm Typical 12 dB SINAD

–102 dBm Typical 30 dB SINAD

Housing:

UR1: Cast magnesium UR2: Aluminum die-cast handle and aluminum machined battery

UR4S+, UR4D+: Galvanized steel

cup

CERTIFICATION

UR1, UR2, UR4S+, UR4D+

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la no rme NMB-003 du Canada. Meets requirements of EMC standards EN 300 422 Parts 1 and 2 and EN 301 489

Parts 1 and 9.

Meets essential requirements of European R&TTE Directive 99/5/EC, eligible to bear the CE mark.

UR1, UR2

Certified under FCC Part 74. (FCC ID: DD4UR1, DD4UR2). Certified by IC in Canada under RSS-123 and RSS-102. (IC: 616A-UR1, 616A-UR2).

Emission Designator: 120KF3E

UR4S+, UR4D+

Approved under the Declaration of Conformity (DoC) provision of FCC Part 15. Certified in Canada by IC to RSS-123. (IC: 616A-UR4P). Conforms to Australian

EMC requirements and is eligible for C-Tick marking. Have been granted the following Country Safety Approvals: cULus Mark for US and Canada: Meets UL6500 and CSA/CAN E60065. UL GS-Cer-

tified to EN60065. Operation of this device is subject to the fol lowing t wo co nditions: ( 1) th is devi ce may

not cause interference, and (2) this device must accept any inter-fer ence, including in terference that may cause undesired operation of the device.

The CE Declaration of Conformity can be obtained from Shure Incor porated or any of its European representatives. For contact information please visit www.shure.com

The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance

Wiring

TA4F

2 4

TA4M

Connector

UR1 MIC JACK BOARD

500

27 pF

+5 V

27 pF

20K

ACTIVE LOAD

AUDIO

GROUND

MICROPHONE ELEMENT

LAVALIER MIC TIES PINS 3 AND 4

NOTE:

TOGETHER; GUITAR CABLE DOES NOT.

FET

Connector

INPUTS AND OUTPUTS

UR1 Transmitter Audio Input

Connector: 4-Pin male mini connector (TA4M) Input Configuration: Unbalanced, active Actual Impedance: >1 M Maximum Input Level:

1 kHz, 1% THD TA4M Connector

Pin Assignments:

UR1 Transmitter RF Output

Connector: SMA Actual Impedance: 50  Pin Assignments: Shell = Ground

UR2 Transmitter Audio Input

Input Configuration: Unbalanced, active Actual Impedance: >1 M Maximum Input Level:

1 kHz, 1% THD

+10 dBu (sensitivity 0 dB)) +20 dBu (sensitivity –10 dB)

Pin 1: Ground Pin 2: +5 Vdc bias Pin 3: Audio Pin 4: Tied through active lo ad (on main

board) to Ground. (On instrument adapter cable, Pin 4 floats)

Center = Signal

+4.8 dBu

+ 2 hidden pages