Shure M44E-GSL User Guide
~--
DATA SHEET
MODEL
M44E-GSL
SPECIFICATIONS
FREQUENCY
RESPONSE: From 20 to 20,000
OUTPUT VOLTAGE: 8.0 millivolts per channel at 1,000
CHANNEL
SEPARATION: 25 db at 1,000
CHANNEL
BALANCE: Within 2 db of each other
RECOMMENDED
LOAD IMPEDANCE: 47,000 ohms (per channel)
INDUCTANCE: 720 millihenries
D.C. RESISTANCE: 630 ohms
STYLUS MODEL
N44E Replacement : Grip Color-Brown
TRACKING FORCE:
GENERAL: This
a
Gar.r.ar.d pirkup head designed specifically for the Garrard SL
Series
and SP
01.
Zero-100.
1.
Remove present pickup bead and insert Shure Cartridge Head
Assc,rr~bly into phono arm. Care must be taken in removal
and inserting of the pickup heads not to cause damage to
the stvlus. For maximum safetv. leave the stvlus guard on
the caktr.idge during removal or 'insertion of pickup Lead.
2. Ealance arm as per Garrard instructions and set stylus force
indicator to
the indicated "maximum" should not be used.
To clean the stvlus. use a camel's-hair brush (No.
smaller) dipped lightly in alcohol. The alcohol will
sludge deposits which may have coated the stylus tip. The brush
bristles should be
Always brush the stylus with a
(terminal end of the cartridge) to the front. Never brush or wipe
the stylus from front to back or side to side.
of
)
recornmended tracking force. Forces greater than
Suggestions for Cleaning Your Stvlus
- -
EASY STYLUS REPLACEMENT
Grasp molded housing of stylus
between
withdraw stvlus
out of
stvlus between thumb and forefineer
and insert into stylus socket.-~r%ss
stylus into socket until molded housing of
cartridge case. Care must be taken
not to-allow the finger to slip off
the rr?olded housing of the stylus
resulting in damage to the stylus
tip or shank.
SPECIAL NOTE: The Dynetic stylus assembly used in these cartridges
pertormance standards of your cartridge, be certain that any replaccnlent stylus you buy bears the following certification on the
package: "This Stereo
by Shure Brothers Inc.
DEGRADE THE PERFORMANCE OF YOUR CARTRIDGE. ALL
GENUINE "DYNETIC" STYLI ARE MANUFACTURED
SHURE BROTHERS INC.
GUARANTEE:
to be free
one year
purchase date. This guarantee includes all parts and labor.
This guarantee does not include stylus wear.
SHIPPING INSTRUCTIONS: Carefully repack the unit and
return it to the factory. If
unit to your dealer or authorized Shure Service Center for repair.
The unit will
PATENT NOTICE: Cartridge and stylus manufactured under
one or more of the following U.
3,077,522, and 3,463,889.
thumb and forefinger. Gently
cartrrdge. Grasp reiplacement
the stylus mates with the
1s the most critical component. To maintain the orig~nal
AVOID INFERIOR IMITATIONS. THEY WILL SERIOUSLY
This Shure product is guaranteed in normal use
f~,om electrical and mechanical defects for a period of
f~.om the date of purchase. Please retain proof of
be returned to you prepaid.
at 5 cm/sec.
ELLIPTICAL SHAPED DIAMOND TIP
.0004 inch (10 microns) side contact radii
,0007 inch (17.8 microns) frontal radius
.0010 inch (25.4 microns) between points
1%
to 4 grams
M44E Stereo Dynetic Cartridge is mounted in
Autorr~atic Turntables. (Does not fit in SL75B
INSTALLATlON
trlmmed to a length no longer than
by wulling forward
gynctic stylus is precision manufactured
outslde the Un~ted States, return the
STEREO DYNETIC@
PHONOGRAPH
CARTRIDGE
HEAD ASSEMBLY
Hz.
(cps)
Hz.
(cps)
of contact with groove.
forward movement from the rear
STYLUS
REPLACEMENT
S.
Patents 3,055,988,' 3,077,521,
Hz.
(cps)
2
size
removeany
j/s
inch.
/I
BY
or
Copy~,~ght
27A882
(LL)
1971,
Shure Brothers Inc
Printed in U.S.A
Loading...