SHOWTEC LED Versatrack User Manual
LED Versatrack
ORDERCODE 42210
Congratulations!
You have bought a great, innovative product from Showtec.
The Showtec LED Versatrack brings excitement to any venue. Whether you want simple plug-&-play action
or a sophisticated DMX show, this product provides the effect you need.
You can rely on Showtec, for more excellent lighting products.
We design and manufacture professional light equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: iwant@showtec.info
You can get some of the best quality, best priced products on the market from Showtec.
So next time, turn to Showtec for more great lighting equipment.
Always get the best -- with Showtec !
Thank you!
1
2
2
3
4
5
5
5
6
6
6
6
7
7
8
9
10
10
11
11
11
12
12
13
14
14
14
15
Showtec
Showtec LED Versatrack™ Product Guide
Warning..…...................................................................................………………………………………………………..
Safety-instructions…………………………………………………………………………………………………………
Operating Determinations…….…………………………………………………………………………………………
Rigging…………………………….…………………………………………………………………………………………
Description..…................................................................................……….……………………………………………..
Features and Overview …………..……………………...….……………….………….……….……….…………….
Backside……………………………….…………………...…...….……………….…………………...…………………
Installation...............................................................................…...………………………………………….………..….
Set Up and Operation.....................................................................……..………………………………………………
Fixing……...........................................……..……………………………….………………………………………….….
Batten Bracket (accessory for Versatrack 42211)………………………………..…….…….………………..
Blinder Frame (accessory for Versatrack 42212)………………………………….…………..….……………
Hinge Kit (accessory for Versatrack 42213)…………………….……………….…….…….………………….
U-Shape Acrylic Cover (accessory for Versatrack 42214) .……………….…………….….…….…………
Menu Functions………………………………………………………………...............................………………..……
Functions…………………………………………………………………………………………………………………….
Stand-alone ……………………….………………………………………..……………….…….…………………
Master/Slave…………………………………………………………….……………………………………………
DMX Operation ….………………………………………………………………….…….…….…………………..
DMX Signal-OFF Setting………………………………………………………….…….…….……………………..
Setting the DMX Control Channel..……..………..……………………………………………..……………….
Func ON…..………..…………………………………………..……………………………………………..………
Func OFF…..………..……………………………………………..……….…………………………………..………
Maintenance...................................................................................………..………….…….…………………………..
Changing the Fuse........................................................................…………………….………………………..…...
Troubleshooting............................................................................………………….………………….………………...
Product Specifications.................................................................……………….…….………………………………...
2
WARNING
CAUTION!
Keep this device away from rain and moisture!
CAUTION! Be careful with your operations.
With a dangerous voltage you can suffer
a dangerous electric shock when touching the wires!
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
SAFETY INSTRUCTIONS
Every person involved with the installation, operation and maintenance of this device has to:
- be qualified
- follow the instructions of this manual
Before your initial start-up, please make sure that there is no damage caused by transportation. Should there
be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow
the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorized modification to the device.
Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Never leave any cables lying around.
Do not insert objects into air vents.
Do not open the device and do not modify the device.
Do not connect this device to a dimmerpack.
Do not shake the device. Avoid brute force when installing or operating the device.
Do not switch the device on and off in short intervals, as this would reduce the system’s life.
Only use device indoor, avoid contact with water or other liquids.
Only operate the fixture after having checked that the housing is firmly closed and all screws are
tightly fastened.
Only operate the device after having familiarized with its functions.
Avoid flames and do not put close to flammable liquids or gases.
Always keep case closed while operating.
Always allow free air space of at least 50 cm around the unit for ventilation.
Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power-cord by the plug. Never pull out the plug by tugging the power-cord.
3
Make sure that the device is not exposed to extreme heat, moisture or dust.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged. Check the device and the power-
cord from time to time.
If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
The user is responsible for correct positioning and operating of the LED Versatrack. The manufacturer
will not accept liability for damages caused by the misuse or incorrect installation of this device.
For adult use only. The device must be installed out of the reach of children. Never leave the unit
running unattended.
For replacement use fuses of same type and rating only.
Repairs, servicing and electric connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.
OPERATING DETERMINATIONS
If this device is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
If the projector is lowered from the ceiling or high joists, professional trussing systems have to be used.
Use a clamp to mount the projector, with the mounting-bracket, to the trussing system.
The projector must never be fixed swinging freely in the room.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety-cable.
When rigging, derigging or servicing the projector, always make sure, that the area below the
installation place is blocked and staying in the area is forbidden.
4
Truss Mount
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
FASE
N
BLUE
BLACK
SILVER
NUL
YELLOW/GREEN
GREEN
GREEN
EARTH
Fixture should be hung on truss structure using a mounting clamp. Always secure the fixture with a secondary
safety attachment.
Wall Mount
Before attaching the device, make sure the installation surface can hold a minimum point load of 10 times
the device’s weight.
Floor Mount
Refer to below diagram for floor mounting instruction.
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
Make sure that the device is always connected properly to the earth!
Improper installation can cause serious damage to people and property !
Loading...