SHOWTEC LED Pixelboard 500/256 Product Manual
LED Pixelboard 500/256
ORDERCODE 101130
Congratulations!
You have bought a great, innovative product from Showtec.
The Showtec LED Pixelboard brings excitement to any venue.
You can rely on Showtec, for more excellent lighting products.
We design and manufacture professional light equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: iwant@showtec.info
You can get some of the best quality, best priced products on the market from Showtec.
So next time, turn to Showtec for more great lighting equipment.
Always get the best -- with Showtec !
Thank you!
Showtec
Showtec LED Pixelboard™ Product Guide
Warning..…...................................................................................…………………………………………..
Safety-instructions………………………………………………………………………………………….….
Operating Determinations…………………………………………………………………………………….
Description..…..............................................................................……….…………………………………
Features and Overview ………………………………...….……………….………….………………….….
Backside…………………………………………………...…...….……………….…………………...….….
Overall Requirements……….…………………….……………………….……………………….………..…
Computer System Requirements……….……………………….……………………….…………………..
Set Up and Operation.....................................................................……..……………………………….…
LED Pixelboard Limitations ……………………………………………………………………….……...….
Mounting System to LED Screen Connection……….………………………………………….……...…..
Connecting 96 LED panels to 1 controller..…………………………………………………….……...……
Maximum System Configuration………………………………………….…………………………………
Mounting System Connections………………………………………………………………………………
Attaching the Flying Bracket…………………………………………………………………………………
Dip Switch Settings……………………………………………………………………………………………
JP1 Dipswitches………………………………………………………………………………………………
JP2 Dipswitches………………………………………………………………………………………………
Transmitter Card………………………………………………………………………………………………
Makking an additional Net-cable…………………………………………………………………………….
Transmitter Card Installation…………………………………………………………………………………
Example System Configurations…………………………………………………………………………….
Speacial Applications…………………………………………………………………………………………
2
2
3
5
5
5
6
6
6
7
8
9
10
11
12
15
15
16
18
18
19
20
23
Maintenance...................................................................................………..………….…….………………
Troubleshooting............................................................................………………….………………….…..
No Light............................................………………….……………………………………………………..
Replacing the Fuse........................................................................…………………….…………………
Product Specifications.................................................................……………….…….…………………..
Other Showtec LED Products.................................................……………….…….………………………
25
25
25
25
26
27
1
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
SAFETY INSTRUCTIONS
Every person involved with the installation, operation and maintenance of this device has to:
- be qualified
- follow the instructions of this manual
CAUTION! Be careful with your operations.
With a dangerous voltage you can suffer
a dangerous electric shock when touching the wires!
Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow
the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
• Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
• Never remove warning or informative labels from the unit.
• Do not open the device and do not modify the device.
• Do not connect this device to a dimmerpack.
• Do not shake the device. Avoid brute force when installing or operating the device.
• Never look directly into the light source.
• Never leave any cables lying around.
• Do not switch the device on and off in short intervals, as this would reduce the lamp’s life.
• Never use the device during thunderstorms, unplug the device immediately.
• Only use device indoor, avoid contact with water or other liquids.
• Avoid flames and do not put close to flammable liquids or gases.
• Only operate the device after having familiarized with its functions.
• Always allow free air space of at least 50 cm around the unit for ventilation.
• Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power-cord by the plug. Never pull out the plug by tugging the power-cord.
• Make sure that the device is not exposed to extreme heat, moisture or dust.
• Make sure that the available voltage is not higher than stated on the rear panel.
• Make sure that the power-cord is never crimped or damaged. Check the device and the power-cord
from time to time.
• The cable insert or the female part in the device must never be strained. There must always be
sufficient cable to the device. Otherwise, the cable may be damaged which may lead to deadly
electrical shocks.
2
• If the external cable is damaged, it has to be replaced by a qualified technician.
(
• If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
• If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
• If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
• For adult use only. Lighteffect must be installed out of the reach of children. Never leave the unit
running unattended.
• The user is responsible for correct positioning and operating of the LED Pixelboard. The
manufacturer will not accept liability for damages caused by the misuse or incorrect installation of
this device.
• This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
• Repairs, servicing and electric connection must be carried out by a qualified technician.
• For replacement use fuses of same type and rating only.
• WARRANTY: Till one year after date of purchase.
CAUTION ! EYEDAMAGES !.
Avoid looking directly into the light source.
meant especially for epileptics) !
OPERATING DETERMINATIONS
This device is not designed for permanent operation. Consistent operation breaks will ensure that the device
will serve you for a long time without defects.
The minimum distance between light-output and the illuminated surface must be more than 0,5 meters.
The maximum ambient temperature t
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
If this device is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash etc.
You endanger your own safety and the safety of others!
Improper installation can cause serious damage to people and property !
= 45°C must never be exceeded.
a
3
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
Cable Pin International
BROWN FASE L
BLUE NUL N
YELLOW/GREEN EARTH
Make sure that the device is always connected properly to the earth!
4
Description of the device
Features
The LED Pixelboard is a fabulous LED Lighteffect from Showtec.
• Inputs: DVI, VGA, RF, YC, YCbCr, SCART, and HDMI
• 16million colors (24bit)
• Effects: Video/flash/text/RGB color mixing and any PC based graphics
• Play music videos (example Windows Mediaplayer) and DVDs from your computer
• Average Lifespan: 50,000~100,000hrs
• Mounting system has rigging points and flexible configurations
• Additional power-con output for daisy chaining units together
• Additional video output for daisy chaining units together
• Rated Power: 192W
• IP Rating: IP65
• OUTPUT/led: 0.08W
• LED/Unit: 2304pcs
• Cooling: Direct air convection
• LED/Pixel: 3xRED/3XGREEN/3XBLUE
• Pixel/Unit: 16 x 16
• Pixel Pitch: 31mm
• Pixel Density: 1024 pixels/m
Control
• Software: LEDstudio
• System: Windows XP/ATI video card
• Works with other manufacturer’s software Pandora’s Box, Arkaos, Sweetlight Timeline
• Applications: Small or large, interior or exterior architectural/ advertising /stage
Overview
Fig. 1
5
Overall Requirements
• Windows XP computer with an available PCI slot
• ATI graphics card or Nvdia Geforce with DVI Out
• LED Pixelboard Controller (101140); 1 controller for every 6 panels wide and 16 panels high
Computer System Requirements
Minimum
Operating system: Windows XP SP2 (Service Pack 2)
Processor: Pentium 200 MHz with at least one free PCI slot
Harddisk: 20 GB 5400 RPM
Memory: 128 MB
Graphic Card: ATI Graphics Card with dual display and DVI-I output
Note: NVIDIA graphics cards are not compatible with this software
Recommended
Operating system: Windows XP SP2 (Service Pack 2)
Processor: Pentium 1 GHz or better with at least one free PCI slot
Harddisk: 40 GB 7200 RPM or more
Memory: 512 MB or higher
Graphic Card: ATI Graphics Card with dual display and DVI-I output
Note: NVIDIA graphics cards are not compatible with this software
Tested on an ATI Radeon 9300
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
The LED Pixelboard can be used indoors and outdoors. Due to the IP65 rating, the LED Pixelboard will be
reliable and safe to use in most weather conditions. The LED Pixelboard can be viewed during night-time as
well as day-time. Due to the clever mounting system it is easy to setup. The LED Pixelboard excellent
design allows you to vary the setup in many shapes and sizes.
6
LED Pixelboard Limitations
Horizontal Panels (Left/Right)
Minimum 1 Panel 16 columns of LED clusters or 16 horizontal pixels/lines
Maximum with 6 panels (1 Controller) 96 columns of LED clusters or 96 horizontal pixels/lines
Maximum with 48 panels (2 Controllers) 768 columns of LED clusters or 768 horizontal pixels
Vertical Panels (UP/Down)
Minimum 1 Panel 16 rows of LED clusters or 16 vertical pixels/lines
Maximum with 16 panels (1 Controller) 256 rows of LED clusters or 256 vertical pixels/lines
Maximum with 32 panels (2 Controllers) 512 rows of LED clusters or 512 vertical pixels
Resolution
Minimum 1 Panel 16 X 16 Pixels
Maximum With (1 Controller) 96 X 128 Pixels
Maximum With (2 Controllers) 768 X 512 Pixels
1 Panel is 16 pixels on your PC screen.
So 8 x 6 panels (4 x 3 meters) = a resolution of 128 x 96 pixels in Windows XP.
7
1) PCB
2) Power supply
3) Power supply mounting plate
4) Mounting support B
5) Rubber seal
6) Plastic casing
7) Mounting support A
8) Handle
9) Display cover
10) Power connector
11) Cable watertight locking nut
12) Rubber seal
13) Watertight locking nut
14) Rubber seal
15) Watertight locking thread
16) Signal connector
17) PCB
18) Alan bolt
19) Signal connector
20) Mains power connection
21) Mains power connection
22) DC +12V
23) COM
24) GND
25) Neutral
26) Live
Mounting System to LED Screen Connection
Each LED Pixelboard panel is mounted to the mounting system using 4 x M10 Hexagon Bolts.
Note: These bolts only need to be removed when an LED Panel needs to be moved or serviced, when the
mounting system is locked to other units (and it is not possible to unlock the mounting system).
8
Loading...