Showtec LED Pinspot Q4 User Manual

LED Pinspot Q4 V1
Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands
MANUAL
ENGLISH
1
Ordercode: 42407
LED Pinspot Q4
Table of contents
Warning ............................................................................................................................................................................... 2
Safety Instructions ......................................................................................................................................................... 2
Operating Determinations .......................................................................................................................................... 4
Rigging ............................................................................................................................................................................ 4
Connection with the mains ......................................................................................................................................... 5
Return Procedure .......................................................................................................................................................... 5
Claims .............................................................................................................................................................................. 5
Description of the device ................................................................................................................................................. 6
Overview ........................................................................................................................................................................ 6
Back ................................................................................................................................................................................. 7
Installation ........................................................................................................................................................................... 7
Set Up and Operation ....................................................................................................................................................... 7
Control Modes ............................................................................................................................................................... 8
One LED Pinspot (Auto, Built-in programs and Manual) .................................................................................... 8
One LED Pinspot (Sound-controlled) ..................................................................................................................... 8
Multiple LED Pinspots (Master/Slave control) ....................................................................................................... 8
Multiple LED Pinspots (DMX Control) ...................................................................................................................... 9
Fixture Linking ...............................................................................................................................................................10
Data Cabling ...............................................................................................................................................................10
Control Panel ...............................................................................................................................................................11
DMX Control Mode .....................................................................................................................................................11
DMX Addressing ..........................................................................................................................................................11
Menu Overview................................................................................................................................................................12
Main Menu Options ....................................................................................................................................................13
1. Auto ........................................................................................................................................................................13
2. Built-in Programs ...................................................................................................................................................13
2.1. Program 01.........................................................................................................................................................13
2.2. Programs 02-10 ..................................................................................................................................................14
3. Static Colors ..........................................................................................................................................................14
4. Sound-controlled Mode .....................................................................................................................................15
5. DMX-512 Mode ....................................................................................................................................................15
6. Master/Slave Mode .............................................................................................................................................15
7. Settings ...................................................................................................................................................................15
7.1. Dimming Curves ................................................................................................................................................16
7.2. Reset ...................................................................................................................................................................16
7.3. DMX Fail ..............................................................................................................................................................16
7.4. DMX Synchronization .......................................................................................................................................16
8. Info ..........................................................................................................................................................................17
8.1. Software Version ...............................................................................................................................................17
8.2. Temperature ......................................................................................................................................................17
DMX Channels .............................................................................................................................................................17
4 channels .................................................................................................................................................................17
6 channels .................................................................................................................................................................17
8 channels .................................................................................................................................................................18
Maintenance ....................................................................................................................................................................19
Troubleshooting ...............................................................................................................................................................19
No Light .........................................................................................................................................................................19
No Response to DMX ..................................................................................................................................................20
Product Specifications ....................................................................................................................................................21
Dimensions ........................................................................................................................................................................22
2
Ordercode: 42407
LED Pinspot Q4
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear to be damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials. In the event that the fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
Showtec LED Pinspot Q4 with a Schuko power cable (1,5 m)
User manual
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
be qualified
follow the instructions of this manual
Before your initial start-up, please make sure that there is no damage caused by transportation. Should there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
3
Ordercode: 42407
LED Pinspot Q4
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the device.
Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Never use anything to cover the ground contact.
Never lift the fixture holding it by the projector-head, as the mechanics may be damaged. Always
hold the fixture by the transport handles.
Never place any material over the lens.
Never look directly into the light source.
Never leave any cables lying around.
Do not insert objects into air vents.
Do not switch the device on and off in short intervals, as this would reduce the device’s lifespan.
Do not touch the device’s housing bare-handed during its operation. Allow the fixture to cool for at
least 5 minutes before handling.
Do not shake the device. Avoid brute force when installing or operating the device.
Only operate the fixture after having checked that the housing is firmly closed and all screws are
tightly fastened.
Only operate the device after having familiarized with its functions.
Avoid flames and do not put close to flammable liquids or gases.
Always keep case closed while operating.
Always allow free air space of at least 50 cm around the unit for ventilation.
Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord by the plug. Never pull out the plug by tugging the power cord.
Make sure that the device is not exposed to extreme heat, moisture or dust.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
If the lens is obviously damaged, it has to be replaced to prevent its functions from being impaired,
due to cracks or deep scratches.
If device was dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
For adult use only. Device must be installed out of reach of children. Never leave the unit running
unattended.
Never attempt to bypass the thermostatic switch or fuses.
For replacement, use fuses of same type and rating only.
The user is responsible for correct positioning and operating of the LED Pinspot Q4. The manufacturer
will not accept liability for damages caused by the misuse or incorrect installation of this device.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
Repairs, servicing and electrical connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.
4
Ordercode: 42407
LED Pinspot Q4
Operating Determinations
This device is not designed for permanent operation. Regular operation breaks will ensure that the
device will serve you for a long time without defects.
The minimum distance between light output and the illuminated surface must be bigger than 0,8
meter.
In order to eliminate wear and improve the device’s lifespan, during periods of non-use, completely
disconnect from power source via breaker or by unplugging.
The maximum ambient temperature ta = 40 °C must never be exceeded.
The relative humidity must not exceed 50 % with an ambient temperature of 40 °C.
If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all other safety issues.
Do not attempt the installation yourself ! Always let the installation be carried out by an authorized dealer !
Procedure:
If the LED Pinspot is lowered from the ceiling or high joists, professional trussing systems can be used.
Use a clamp to mount the LED Pinspot, with the mounting bracket, to the trussing system.
The LED Pinspot must never be fixed swinging freely in the room.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
When rigging, derigging or servicing the LED Pinspot, always make sure, that the area below the
installation place is blocked and staying in the area is forbidden.
The LED Pinspot can be mounted to any kind of truss with a clamp.
Improper installation can cause serious injuries and/or damage of property!
5
Ordercode: 42407
LED Pinspot Q4
Connection with the mains
Connect the device to the mains with the power plug. Always check if the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
PHASE
N
BLUE
BLACK
SILVER
NEUTRAL
YELLOW/GREEN
GREEN
GREEN
PROTECTIVE GROUND
Make sure that the device is always connected properly to the earth!
Improper installation can cause serious damage to people and property!
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.com and request an RMA prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause of the return. Be sure to properly pack fixture as any shipping damage resulting from inadequate packaging
is the customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper inside the box:
01) Your name.
02) Your address.
03) Your phone number.
04) A brief description of the symptoms.
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short­comings and/or visible defects, or perform this check after our announcement that the goods are at their disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be reported to the carrier upon receipt of merchandise. It is the customer's responsibility to notify and submit claims with the shipper in the event that the fixture is damaged due to shipping. Transportation damage has to be reported to us within one day after receipt of the delivery. Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless agreed otherwise in writing. Complaints against us must be made known in writing or by fax within 10 working days after receipt of the invoice. After this period, complaints will not be handled anymore. Complaints will only be considered if the client has so far complied with all parts of the agreement, regardless of the agreement of which the obligation is resulting.
6
Ordercode: 42407
LED Pinspot Q4
Description of the device
Features
The Showtec LED Pinspot Q4 is a powerful but compact LED pinspot. It is ideal for illuminating mirror balls or small surfaces.
Input voltage: 100-240 V AC, 50/60 Hz
Power consumption: 22 W
Light source: 1 x 15W 4-in-1 RGBW Prolight Opto LED
Drive current: 1000 mA
Lumens: 44
Lux @ 2 m: 7010
Max. distance: 10 m
Control protocol: DMX-512
DMX channels: 4, 6, 8 channels
Control modes: Auto, Built-in programs, Static Colors, Sound-controlled, Master/Slave, DMX
Dimmer: 0-100 %
Strobe: 0-20 Hz
Beam angle: 3,2° (+/-1°)
Housing: ABS plastic
Color: Black
IP rating: IP20
Connections: Schuko power cable, 3-pin XLR DMX IN/OUT
Cooling: Convection
Operating temperature: From -20 °C to +40 °C
Dimensions: 320 x 166 x 222 mm (LxWxH)
Weight: 1,2 kg
Overview
Fig. 01
01) Mounting bracket with inclination screws
02) 1 x 15W 4-in-1 RGBW Prolight Opto LED
7
Ordercode: 42407
LED Pinspot Q4
Back
Fig. 02
03) LED display + control buttons
04) Schuko power cable (1,5 m)
05) 3-pin DMX signal connector IN
06) 3-pin DMX signal connector OUT
Installation
Remove all packing materials from the LED Pinspot Q4. Check if all foam and plastic padding is removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode. Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa. Connect the device to the main power supply.
Loading...
+ 16 hidden pages