ShoreTel BB24
Quick Install Guide & Warranty
Document and Software Copyrights
Copyright © 1998–2006 by ShoreTel, Inc., Sunnyvale, California, U.S.A. All rights reserved. Printed in the United States of America. Contents of this publication may not be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without prior written authorization of ShoreTel, Inc.
ShoreTel, Inc. reserves the right to make changes without notice to the specifications and materials contained herein and shall not be responsible for any damage (including consequential) caused by reliance on the materials presented, including, but not limited to, typographical, arithmetic, or listing errors.
Trademarks
ShoreCare, ShoreWare and ShoreGear are registered trademarks of ShoreTel, Inc. in the United States and/or other countries. ShoreTel, ShoreTel 6, ShorePhone, Office Anywhere and ShoreTel Smart are trademarks of ShoreTel, Inc. in the United States and/or other countries.
Microsoft, Windows, Windows NT, and ActiveX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. VxWorks is a trademark of Wind River Systems. All other copyrights and trademarks herein are the property of their respective owners.
Version Information
PN 800-1038-01
ShoreTel 6 BB24 Quick Install Guide & Warranty
Date: March 30, 2006
Company Information
ShoreTel, Inc.
960 Stewart Drive
Sunnyvale, California 94085
Phone: 1-408-331-3300 OR 1-800-425-9385
Fax: 408-331-3333
www.shoretel.com
This section shows how to install a ShoreTel BB24. Instructions are provided for connecting the button box with and without the AC power adapter. (This adapter may be necessary for networks that do not support the IEEE 802.3af standard for Power- over-Ethernet).
Package Contents
ShoreTel BB24 |
|
|
Network cable (7-foot) |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Network cable (18-inch)
Phone base |
Quick Install Guide |
|
AC Power Adapter Package (Optional)
Power-over-Ethernet adapter and |
Additional network cable (7-foot) |
power cord |
|
3
1 Attach button box to base
aConnect the base to the larger of the three tabs on the back of the button box.
bRotate the two pillars down onto the smaller tabs and snap into place.
4