Sherwood WD-1 Operating Instructions Manual

WD-1

NETWORK AV ADAPTER

ADAPTATEUR AV RÉSEAU

ADAPTADOR AV CON CONEXIÓN DE RED

NETZWERK-AV-ADAPTER

СЕТЕВОЙ AV-АДАПТЕР

OPERATING INSTRUCTIONS

GUIDE D’UTILISATION

INSTRUCCIONES DE FUNCIONAMIENTO

BEDIENUNGSANLEITUNG

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

2

Safety Information

READ THIS BEFORE OPERATING YOUR UNIT

CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE FRONT OR BACK COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates the presence of uninsulated “dangerous voltage” within the product’s

enclosure that may be of sufcient magnitude to constitute a risk of electric shock.

This symbol indicates important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.

WARNING

: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION

•Leave space around the unit for sufcient
ventilation.

•Avoid installation in extremely hot or cold
locations, or in an area that is exposed to
direct sunlight or heating equipment.

•Keep the unit free from moisture, water, and
dust.

•Do not let foreign objects in the unit.

•Keep the ventilation openings clear of items,
such as newspapers, linens, or curtains.

•Keep open ame from candles or other
sources away from the unit.

•Observe the local regulations regarding

disposal of packaging materials, exhausted

batteries and old equipment.

•Do not expose the unit to dripping or

splashing, or place objects lled with liquids

such as vases.

•Do not let insecticides, benzene, or thinner
come in contact with the unit.

•Never disassemble or modify the unit in any
way.

Notes on the AC power cord and the wall
outlet

•The unit remains connected to AC power
as long as it is plugged into the wall outlet,
even if the unit has been turned off.

•To completely disconnect this product from
AC power, disconnect the plug from the wall

socket outlet.

•When setting up this product, make sure
that the AC outlet you are using is easily
accessible.

•Disconnect the plug from the wall outlet
when not using the unit for long periods of
time.

FCC Notice

This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:

Safety Information

English

3

Reorient or relocate the receiving antenna.
Increase the separation between the equipment

and the receiver.
Connect the equipment to an outlet on a circuit

different from that to which the receiver is
connected.

Consult the dealer or an experienced radio/TV
technician for help.

This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions :

(a) This device may not cause harmful

interference, and

(b) This device must accept any

interference received, including
interference that may cause undesired
operation.

(FCC Part 15.21) Caution: changes or

modications not expressly approved by the

party responsible for compliance could void the
user’s authority to operate the equipment.

For Canadian customers:

This Class B digital apparatus complies with
Canadian ICES-003.

Cet appareil numerique de la Classe B est
conforme a la norme NMB-003 du Canada.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be
installed and operated with a minimum distance
of 20 cm between the radiator and your body.

This transmitter must not be co-located or
operated in conjunction with any other antenna
or transmitter.

Important Safety Instructions

1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.

7 Do not block any ventilation openings.

Install in accordance with the
manufacturer’s instructions.

8 Do not install near any heat sources such

as radiators, heat registers, stoves, or

other apparatus (including ampliers) that

produce heat.

9 Do not defeat the safety purpose of

the polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong
is provided for your safety. If the provided

plug does not t into your outlet, consult an

electrician for replacement of the obsolete
outlet.

10 Protect the power cord from being walked

on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.

11 Only use attachments/accessories

specied by the manufacturer.

12 Use only with the cart, stand,

tripod, bracket, or table
specied by the manufacturer,

or sold with the apparatus.
When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning

storms or when unused for long periods of
time.

14 Refer all servicing to qualied service

personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.

Product Name

: Network AV ADAPTER

Model Number

: WD-1

Responsible Party Name

:

ETRON CORPORATION

Address

:

6120 Valley View Buena Park, Ca. 90620

Phone

: 1-714-739-2000

URL

: http://www.sherwoodamerica.com

4

Table of Contents

2 SAFETY INFORMATION

5 GETTING STARTED

5 What's Included
6 Installing the Remote Control Battery
6 Operating the Range of the Remote Control
7 Parts Description

9 MAKING CONNECTIONS

9 Connecting HDMI Components
10 Connecting Digital Audio Components

10 Connecting to a Network

11 Connecting Power

12 OPERATING YOUR DEVICE

12 Turning on Your Unit

12 Setting the Network Standby Control
12 Setting the Network Setup

14 Listening to Internet Radio
15 Listening to Music from the Media Server
16 Using the Sherwood Remote Application
21 Updating the Firmware

23 TROUBLESHOOTING

24 ADDITIONAL INFORMATION

24 Specications
25 Trademarks and Licenses

5

English

Getting Started

What's Included

Main unit

Remote control (1 ea) Battery “AAA” size, 1.5V (2 ea)

WD-1

NETWORK AV ADAPTER

OPERATING INSTRUCTIONS

Power adapter (1 ea) User manual (1 ea)

•The items supplied with your unit are subject to change without prior notice.

WD-1 NETWORK AV ADAPTER

6

Installing the Remote
Control Battery

1

Remove the battery cover.

2

Insert two AAA size batteries with the
polarity matched properly.

•Always use alkaline batteries, and do not
use the rechargeable batteries (Ni-Cd
type).

•If the batteries run out, remove the old
batteries and replace them with new ones
within several minutes.

•If the batteries are removed or have been
exhausted for a longer period of time,
memorized contents will be cleared. In
this case, you should memorize them
again.

•If the battery is placed incorrectly, it can
cause explosion.

•Remove the battery if the remote control
is not used for a long period of time.

•Do not leave the product in a hot or
humid place.

•Do not handle and store the battery with
metallic tools.

Operating the Range
of the Remote Control

Use the remote control within a range of about
7 meters (23 feet) and angles of up to 30
degrees aiming at the remote control sensor.

30 30

7m

English

7

Parts Description

Front and Rear Panel

2

1

3

7

5

6

4

1

Status LED

2

Power Connector

3

OPTICAL OUT Connector

4

LAN/ETHERNET Connector

5

HDMI Connector

6

USB Connector (For Upgrade only)

7

IR Sensor

WD-1 NETWORK AV ADAPTER

8

Remote Control

1

3

2

11

10

9

8

7

6

5

4

1

POWER ON

Turns on the main unit.

2

MODE

Adjusts the screen resolution. (Original/Full)

3

DISPLAY

•When playing audio or video les, turns on

or off the progress bar.

•When viewing photos, turns on or off the

slideshow transition time display.

4

/ / / /

ENTER

•Navigates through the menus.

•Conrms a setting option or menu.

5

TOP MENU

Moves to the top menu for each media or
service.

6

Fast-reverses the current le.

Fast-forwards the current le.

Plays or pauses playback.

Selects the previous le.

Selects the next le.

Stops playback.

7

SHUFFLE

Activates the random playback.

8

REPEAT

Activates the repeat function.

9

RETURN

Returns to the previous menu.

10

SETUP

Enters or exits the system setup menu.

11

STANDBY

Turns off the main unit to the normal standby
mode.

9

English

Making Connections

Connecting HDMI
Components

With HDMI, you can easily enjoy high quality
sounds and images. The main unit plays
audio from HDMI compatible products while
also passing on the video signal to a HDMI­connected TV.

About HDMI

HDMI (High Denition Multimedia Interface)

supports both audio and video on a single
digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices.
HDMI was developed to provide the
technologies of High Bandwidth Digital Content
Protection (HDCP) as well as Digital Visual

Interface (DVI) in one specication. HDCP is

used to protect the digital content transmitted
and received by DVI-compliant displays.

HDMI has the capability to support standard,

enhanced, or high-denition video plus

standard to multi-channel surround-sound
audio. HDMI features include uncompressed
digital video, a bandwidth of up to 2.2 gigabytes
per second (with HDTV signals), one connector
(instead of several cables and connectors), and
communication between the AV source and AV
devices such as DTVs.

This main unit is also compatible with the
DeepColor and x.v.Color feature (x.v.Color is

trademarks of Sony Corporation.).

•Check the setup of the connected
component if an image is poor or there is
no sound from a component connected
via the HDMI cable.

•Audio signals (sampling frequency,
bit length, etc.) transmitted from an

HDMI jack may be suppressed by the

connected component.

•When the connected component is not
compatible with copyright protection
technology (HDCP), the image and the

sound from the HDMI TV OUT jack may

be distorted or may be not output. In

this case, check the specication of the

connected component.