Sharp ZQ-2400, ZQ-2200, ZQ-2000 User Manual

SHARR

Congratulations on purchasing the

ZQ-2000/ZQ-2200/ZQ-2400

Electronic Organizer. Please read this operation manual carefully to familiarize yourself with all the features of the Organizer and to ensure years of reliable operation. Also, make it a point to keep this operation manual on hand

for reference.

Notes:

One of the models described in this manual may not be available in

some countries.

Unless otherwise specified, the text material applies to all three models.

NOTICE

SHARP strongly recommends that separate permanent written records be kept of

all important data. Data may be lost or altered in virtually any electronic memory product under certain circumstances. Therefore, SHARP assumes no responsibility for data lost or otherwise rendered unusable whether as a result of improper use, repairs, defects, battery replacement, use after the specified battery life has expired, or any other cause.

SHARP assumes no responsibility, directly or indirectly, for financial losses or claims from third persons resulting from the use of this product and all of its functions, such as stolen credit card numbers, the loss of or alteration of stored data, etc.

The information provided in this manual is subject to change without notice.

Features of the Organizer

Clock function

Displays current date and time.

Calendar function

Contains a calendar, which extends from the year 1901 to 2099. Important dates on your monthly calendar will be flagged, so you can check what has been scheduled for any designated day.

Schedule function

Allows you to store important dates and events. Important dates will also be flagged on the calendar to remind you to check them. A schedule alarm can also be set.

PAGE 29

Anniversary function

Allows you to register wedding anniversaries, birthdays, etc. After registration, the corresponding day is considered an anniversary for every year from 1901 to 2099.

PAGE 47

Telephone book function

Three telephone lists allow you to list business and private numbers separately.

Phone numbers can be recalled in alphabetical order using the sequential search

function, or directly Lecalled by entering. + PAGE 53

+PAGE

--+

PAGE 23

‘Memo function

Allows you to note important details, such as timetables and also store price lists, etc. + PAGE 63

Calculator

Contains a lo-digit calculator with memory. + PAGE 71

Secret function

Protects personal information. A password is required to see the information you mark as secret. + PAGE 75

Data transfer function

By using an optional cable, data can be transferred between two Organizers.

PAGE 89

Contents

BEFOREUSE........................................7

GETTING STARTED

Partnames Display symbols

Keynotations..........................................ll

Contrast adjustment

Turning the “beep” on and off

............................................

BASIC ENTRY PROCEDURES

Entering characters Making corrections

USING THE CLOCK

Displaying the time

Settingtheclock .....................................

USING THE CALENDAR FUNCTION

Displaying and changing the monthly calendar Displaying the number of days and weeks between

January 1st or December 31 to a specified date

USING THE SCHEDULE FUNCTION

Entering data in the SCHEDULE mode

Recalling scheduled data Editing scheduled data Copyingscheduleddata Deleting scheduled data Using the schedule alarm

.................................

.......................................

....................................

............................

.........................

....................................

.....................................

...............................

....................................

...................

..............

.............

...................

....................

...............................

.................................

...............................

.................. .............

...............................

.I0

.I2

.I3

.I3 .15

..I

.I9

..I

.23

.27

.29

.29 .33

.40

..4 1

.42 .45

USING THE ANNIVERSARY FUNCTION

Entering anniversaries Recalling anniversaries

Checking anniversaries

Editing anniversaries Deleting anniversaries

..................................

.................................

...................................

..................................

USING THE TELEPHONE DIRECTORY.

Designating the file names

..............................

................

...............

.47

..5

.47 .48 .48

.49

-50

Entering listings Recalling listings Editing listings Deleting listings

.......................................

......................................

....................................... ..5

.......................................

USING THE MEMO FUNCTION

Entering memos

Recallingmemos.. ...................................

Editingmemos.........................................6

Deleting memos

.......................................

USING THE ORGANIZER AS A CALCULATOR

Using the Organizer in the CALC mode When the error message appears

USING THE SECRET FUNCTION

Registering a password Coding data as secret data Turning off the secret function Turning on the secret function

Recalling secret data Declassifying secret data by removing the secret code Deleting and changing the password

What to do if you forget the password

.................................

...................................

USING THE MISCELLANEOUS FUNCTIONS

Checking the memory capacity Setting the date format

................................. .86

........................63

..........

....................

.........................

......................

.............................. .76

............................ .78

............................

........ .80

......................

.....................

............ .85

........................... .85

.63

..6 4

.67

.71

.71 .73

.75

.79 .79

.81 .82

USING THE DATA TRANSFER FUNCTION . . . . . . . . . . . . . . .89

Transferring data between ZQ-2000 series Organizers . . . . . . . .

Transferring data with a ZQ-5000 series or IQ series Organizer . Transferring data with an EL series Organizer (including

Auto Dialer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

APPENDIX .......................................

Caring for your Organizer When trouble occurs

Replacing batteries

Specifications

........................................

............................... .97

...................................

.................................... .99

.89 .93

.94

..9 7

.98

.I03

Be sure to perform the following procedures before using the Organizer for the first time:

1. Remove the insulation sheet.

Note:

When you remove the insulation sheet, write down the date on

the label on the back of the Organizer (refer to page 101).

2. Initialize the Organizer.

While holding

the RESET switch and then release

[ml

, press the RESET switch on the back. Release

. The following display

will appear:

Data has been broken! Clear all

CAPS

Note:

Under certain conditions the message may appear as “DATA

i’

ALL CLEAR OK (Y/N)?“. Proceed to the next step in either case.

vi.

Press

TEL 1 4

NAME

CAPS

i’

The Organizer is initialized and then the TEL1 directory is displayed.

Part names

Display Command center Power on/off keys

Search keys

Option port

(4-pin option jack)

Cursor movement keys

Enter key

Return key

Display symbols

EDIT SHIFT

CAPS

Note:

This symbol appears when the operating battery level is low. The entry on the display may be edited.

-1

Capital letters will be entered. (To enter small letters, turn “CAPS” off by pressing

The data appearing on the display is secret data accessible only by password.

The secret function is in effect. (Secret data cannot be recalled without the password.)

A “beep” will sound when a key is pressed.

The specified schedule alarm(s) will sound.

There is more data which is not on the display. The data can

be displayed by pressing

In this manual, only the symbols necessary for explanation will be

shown.

has been pressed..

I].)

or pl .

Key notations

This manual uses the following notations for key operations and functions.

Key

CALENDAR

. . . . . .

. . .

Notation

CALENDAR

orwMARKlr]

Aor

Keys with only one function always appear in the manual with the function enclosed in a box.

Keys with multiple functions appear in the manual with only the contextually appropriate function boxed; i.e.,

1 &&* 1

-1

Alphabetical keys with multiple functions appear sometimes as unboxed letters and sometimes as the boxed function name, as per context.

Numerical keys and alphabetical keys with single function are notated only

with unboxed numbers and letters.

Note

will sometimes appear as

and sometimes as

Note: The blue functions and symbols are operated by press-

ing

-1

key.

(“SHIFT” will be displayed) and the appropriate

Example: Functions as a cursor movement

key.

-1

: Function as a delete

key.

Distinguishing between “0” and “0”

Zero is indicated as “0” on the display and also in this manual when it may be confused with the letter “0”.

Contrast adjustment

Adjust the display contrast to make the display easier to read.

1. Press

-1

1 FUNCTION 1 .

FUNCTION

MEMORY CHK

LCD CONT DATA DEL

2. Select “2 LCD 2

CONT”.

LCD CONT

A-DARK V-LIGHT

3. Press a or m to darken or lighten the display as required.

The amount of contrast will change continuously when either

is held.

4. After adjusting the contrast, press

1-j

Turning the “beep” on and off

While “ &” is displayed, a “beep” will sound when a key is pressed. To turn the “beep” on and off, press -1ml.

sound after

“a”

goes off. To turn the “beep” back on, repeat the process.

The “beep” will not

To practice entering characters and numbers, select the MEMO mode, for

example, and enter the characters as follows:

rMi3iaJ

MEMO ?

The MEMO mode will be selected.

CAPS

Entering characters

Entering the letters

1. Enter “ABCDE” in capital letters, for example.

ABCDE

To enter “abcde” in small letters, press

disappears, enter “abcde”.

-1

To enter capital letters again, turn “CAPS” back on by pressing

l7FSJ

again.

Note: To enter a hyphen, press

ABCDE

I-1.

-1

. After “CAPS”

CAPS

Entering non-English characters

Enter “A”, “ii”, ‘W and

IFIA

“$I is entered by pressing

ters can also be entered as symbols.

‘W’,

for example.

El . Non-English charac-

Entering numbers

Enter

“12345”,

for example.

-1

12345

12345-

Entering graphic symbols and special characters

Press

-1

to select the symbol entry mode. A total of 33 symbol

displays may be selected. To select the symbol display containing the

desired characters, press

. When

the desired

symbol or

character appears, press the number corresponding to its symbol position.

Enter the symbol entry mode.

-1

j3mq

MEMO ?

5 symbols will be displayed.

2. Switch to the next set of symbols.

Each time m[is pressed, a new set of 5 symbols will appear in

sequence.

3. Enter

I‘?“.

Press

III

when a ‘I?” appears

next to the number one.

Note: When you press

, the previous set of symbols reappears.

The initial symbol display is thus determined by your previous

choice. The 5 most recently used symbols and characters will appear in the initial symbol display.

Nate:

To exit the symbol entry mode, press -1

Entering the new-line character

Enter the

F’J

“cl”

character to continue entry on the next line by

, Then the cursor moves to the beginning of the next line.

‘2”

Making corrections

Misspellings and incorrect entries can be corrected using as well as

-1

and

the cursor keys

as follows:

preS+SinCJ

Correcting misspellings

If you have entered “NEW

may be corrected as follows:

Enter the incorrect spelling.

-1

NEW YARK

YARK”

for “NEW YORK”, for example, the entry

2. Now move the cursor to the incorrect letter “A”.

l3lmlrl

3. Enter the correct letter “0”.

Inserting missing letters

To enter the missing example:

1. Enter the incorrect spelling.

-1

NEW YRK

2. Next move the cursor over the “R”.

“0”

and correct “NEW

NEW YARK

NEW YORK

YRK”

to “NEW YORK”, for

3. Put the Organizer into insert mode.

NEW YRK

4. Insert the missing letter. 0

When

“

”

to “ 4 ” indicating that the insert mode is set.

again to exit the insert mode.

-1

are pressed, the cursor mark changes from

Press

-1

Deleting unwanted letters

To correct “NEW YOARK” to “NEW YORK”, for example:

1. Enter the incorrect spelling.

NEW YOARK

2. Move the cursor to the letter “A” to be deleted.

lrllrllrl

NEW YOARK

Delete the letter “A”.

L3iiiF-l

You can also delete “A” by pressing

Note; If

1-1

is pressed, the data currently being entered will be

m m II

deleted.

The following descriptions explain the functions.

Moves the cursor to the right.

l.3:

Moves the cursor

Moves the cursor up to the previous line.

Moves the cursor down to the next line.

Puts the Organizer into insert mode. Pressing

these

keys again exits the insert mode.

to the left.

rsiiiFq I]: [--El

Cursor:

“-”

designates the cursor. the next letter, number, or symbol will be entered. When correcting an entry, move the cursor to the position where a character is to be typed over or deleted. The cursor changes to “ m “.When inserting characters, the cursor changes to “ 4

Deletes the character at the cursor. Deletes the character to the left of the cursor

(“backspace”). Clears the data being entered.

The cursor is used to indicate the position where

“.

The Organizer features a built-in clock which allows the Organizer to do

the following:

1. To display the current monthly calendar in the CALENDAR mode.

To keep track of the items scheduled on the agenda for the current day in the SCHEDULE mode (automatic tracking).

3. To sound the schedule alarm.

Displaying the time

Pressing

-1

displays the current date and time.

1CLoCKj

The display appears only while

-1

Day of the week month/day/year*

is pressed.

-WE 1/ l/91

;

* The display can be changed to show the date in the format of

month. year”. Refer to page 86.

Note:

-1

was initially pressed is displayed. The internal clock continues

working while

change.

is pressed continuously, the time when

-1

is pressed, but the display does not

-1

Setting the clock

The time can be displayed using either the conventional system or the 24-hour system

For example, set the clock to January IO, 1992, 1;30 PM.

(0:OO

2359

hrs.).

12-hour

AM/PM

‘Iday.

Setting the clock on a

129hour

AM/PM basis

1. Press

-1

TUE l/

1/'91

JiiGG-j

2. Select the time system.

The number highlighted in the lower left corner of the screen indicates the time system. Each time between ‘I m” and “m

In this example,

Note:

To set the 24-hour system, display

3. Set the time.

01 30

I‘m”

rRvq

is displayed.

“.

is pressed, this alternates

“m”.

TUE l/

1/'91

Note: The hours and minutes must be entered using two digits each.

4. Enter the date.

p-j

01 10 1992

FRI 1/10/'92

Enter the single digit months or days, enter “0” before the single digit.

rrronth

and day using 2 digits and the year using 4 digits. For

5. Enter the correct starting time.

ri%iTEq

Notes:

Use the beep of the time announcements given on the radio, on

T.V., or by telephone time services.

l The clock starts from 0 seconds.

6. Check the set time on the display.

FRI

1/10/'92

When the time is set with displayed as below.

11:59AM + 12:OOPM

11:59PM

+ 12:OOAM

12-hour

(noon) -+

(midnight) + 12;59AM + 1

basis, noon and midnight changes are

12:59PM

-+ 1 :OOPM -+

;OOAM + 11:59AM

Correcting the clock

To correct the time, reset the clock by following the procedure in ‘Setting

the clock”.

Monthly calendars covering the period from January, 1901 through December, 2099 can be displayed. In addition, for a given day it is possible to determine the number of days passed since January 1st of that year and the number of days remaining until December 31st of the same year.

Displaying and changing the monthly calendar

There are three methods of recalling dates and scanning the built-in

calendar.

Displaying the calendar and changing the month with

2. Specifying the desired date, past or future, with the numerical keys.

3. Designating the year and month on the monthly calendar.

Iv]

171.

Changing the month with

1/\1

Once the CALENDAR mode has been selected, the month can be changed by pressing

(to display upcoming months) or

(to display past

months) as follows:

1. Select the CALENDAR mode.

‘*5

’

12 13 14 15 18 17

192021 26 27 28 29 30

Notes:

If the above display does not appear, press 1 SHIFT 1 ICALENDAR]

to display the current monthly calendar. In this instance, if you set the Organizer’s built-in clock for January 10, the calendar for January 1992

, ,

2 3

6 7 8 9 10 11

22 23 24 25

will be displayed.

In the year display, a “ ’ ”is attached to the years 1901 to

1999,

while

no mark is attached to the years 2000 to 2099.

2. Display the calendar for the next month.

9 1

‘*2*3

5 6 7 8

101112 131415 16 17 18 192021 23 24 25 26 27 28 29

3. Display the calendar for three months prior to the month presently on the display.

lIIclI/\

Note: When

or 1/\1 is pressed continuously, the calendar will

“3

4 5 6 7 8 9

’ ’1011

17 18 192021 24 25 26 27 28 29 30

scroll forward or backward.

To return the calendar to the current date:

Press (1-1

Setting a date with the numerical keys

Use

I-1

to set a date that is a specified number of days in the

past or future.

1. Select the CALENDAR mode.

(CALENDAR1

‘*5

6 7 8 9

’

12 13 14 15 16 17 18 192021 26 27 28 29 30

12 131415 16

22 23

2 3

22 23 24 25

2. Set January 15 as the reference date.

ml l3l El

g25

’

12 13 14 15 16 17 18 192021 26 27 28 29 30

6 7 8

2 3

9 10

22 23 24 25

To set the reference date to a different month, display the new month by pressing

Ir\l

and then flash the date with the cursor

movement key.

3. Set the date for the 90th day from today.

1+190

pTmJ

’

2 5

412

6 7 b

13 14 15 16 17 18

192021

26 27 28 29 30

22 23 24 25

The 90th day from today will flash on the display.

Note: The number of days specified can range from 9999 days in the

past to 9999 days in the future.

4. Set the date five weeks (35 days) before April 14th, 1992.

‘1234567

’

2 8 315916 10

22 23 24 25 26 27 28 29 30

17 11 18

12 13 14 192021

Recalling a month by designating the date

You can also change the calendar with you would like to display when the date prompt appears, and then pressing

1 CALENDAR ] again.

1-1

, entering the date which

For example, to display the month of February, 1992:

Select the CALENDAR mode.

CALENDAR

2. Enter the date entry mode.

pm-j

]

2 3

g25

7 8 9

’

12 131415 16 17 18 192021

26 27 28 29 30

22 23 24 25

MM/DD/YYYY

MONTH:01 DAY YEAR

To make a correction, move the cursor with the cursor movement keys, or press

to clear the displayed date.

:10

11992

3. Enter the date.

02 01 1992

MM/DD/YYYY

MONTH:02 DAY

:Sl

YEAR : 1992

Note: To enter a single-digit date or month, enter zero and the digit

(i.e., “06”).

4. Recall the calendar.

1 CALENDAR 1

1 8

The specified monthly calendar will be displayed.

‘*2

3 4 5 6 7

101112 131415

18 192021

16 17

23 24 25 26 27 28 29

Displaying the number of days and

weeks between January 1st or

December 31 to a specified date

It is possible to determine the number of days between January 1st and a specified date, as well as the number of days between a specified date and December 31. It is also possible to determine how many weeks have passed since the beginning of the current year.

To determine these items, press 1 CALENDAR ] while the calendar is displayed.

1. Select the CALENDAR mode.

1 CALENDAR 1

19 20 21 22 23 24 25 26 27 28 29 30 31

2. Determine the number of days passed/left, and number of weeks

passed in the year. Press I CALENDAR I a second time.

[

CALENDAR 1

1‘*’5

6 7

12 13 192021 22 23

; i

14 15 16

lo/3561

I”0

17 24 25

The numbers “[I

indicates that this is the

O/35610”

will appear at the end of the display.

10th

day of 1992, “356” indicates that there

“10”

are 356 days left in the year, and “2” indicates that this is the 2nd

week of the year.

The Organizer recognizes each Monday-to-Sunday interval as one week. The number of the week in the year (1 st,

2nd, 3rd,

etc.) is

determined as follows:

If January 1st falls between Monday and Thursday, it begins the

1. first week of the year.

2. If January 1st falls between Friday and Sunday, it begins the final week of the previous year.

If December 31 falls between Monday and Wednesday, it begins

the first week of the next year.

Note:

To display a date not shown, move the cursor with the cursor movement keys.

3. Return to the original display.

1 CALENDAR 1

You can enter important future appointments as well as important dates

in the past into the Organizer’s schedule function. These dates are marked

with tags on the Organizer’s calendar display. In addition, you can set an

alarm to sound at the scheduled time as a reminder. (Refer to “Using the schedule alarm,” page 45.)

Entering data in the SCHEDULE mode

The date of a schedule item can be selected using three different

methods.

1. By selecting the desired date in the CALENDAR mode.

2. By selecting the desired date in the SCHEDULE mode.

3. By recalling the desired date directly. Once the date has been selected, actual entry of the schedule item is the same for all three methods.

Note: Multiple items may be scheduled on the same date.

If other items have been previously scheduled for a given date, simply enter the new appointment over the old one. Organizer’s display will clear upon recognition of the new entry.

Entering items from the CALENDAR mode

To enter an item from the CALENDAR mode, such as, “February 20,1992

O:OOAM-2:OOPM

ABC Project meeting”

The

1. Select the CALENDAR mode.

1 CALENDAR

]

g25

’

12 13 14 15 16 17 18 19 20 21 22 23 24 25

26 27 28 29 30 31

6 7 8 9

2 3

2. Change the calendar to February 1992.

3. Move the cursor to the 20th of February, using the cursor movement keys.

IrlIrlIrlirllrl

4. Change to the SCHEDULE mode.

SCHEDULE 1

The date you have selected (February 20, 1992) will appear at the top of the display. The bottom part of the display is for schedule time and detail.

5. Enter the starting time.

922

5 6 7 8

101112 131415 16 17 18 19 20 21 23 24 25 26 27 28 29

THU

Z/20/’

(“:OO”

will be entered automatically.)

6. Enter the finishing time.

2/PMI

THU 2/20/’

lO:OOAM-

2:OOPM

7. After both starting and finishing times are entered, enter the schedule detail.

ABC Project

meeting

THU Z/20/*92

: OOAM-

ABC meet i

8. Store the scheduled meeting in the memory.

THU ABC Project

meeting

9. Now, check to see if the data was registered in the memory.

CALENDAR

]

ProjectA

2/20/'92

922

9 10

17 18 19

23 24 25 26 27 28 29

2 : OOPM

ng-

2 : OOPM

OOAM-

6 7 8

11 12 13 14

20’2122

Notice the tag ( n ) next to “February 20”. It indicates a scheduled item

for that date. (Items beginning in the morning result in a tag at the upper

right of the date, while those beginning after noon result in a tag appearing at the lower right of the date.)

Entering items from the SCHEDULE mode

There are two methods of selecting the date depending on which is more convenient.

Selecting the date with

This method is convenient for displaying a nearby date. It changes the schedule display day by day until the desired date appears.

and

For example, if you wish to schedule an item such as, “February 18,

3:OOPM -

1. Press 1 SCHEDULE 1 .

2. Recall “February 18”.

3. Enter the schedule time and detail.

5:OOPM Sales meeting”

Press m or II until “February 18” is recalled.

I-m-l

Sales meeting

pKq

-1

TUE

Z/18/’

TUE 2/18/’

3:00PM- 5:OOPM

Sales

meetin

Scheduling with

When the date is not close to the displayed date, you may find it more convenient to enter the schedule items with the numerical keys.

For example, to schedule, “February 25,1992 1:30PM DR. WILSON VISIT AT GUEST ROOM”.

1. Enter the date entry mode.

1 SCHEDULE ]

2. Enter the scheduled date. (February 25, 1992)

02 25 1992

-1

and the numerical keys

I-

-1

3. Select the SCHEDULE mode.

1 SCHEDULE 1

4. Enter the scheduled time and detail.

1~30301

DRm

WILSON VISIT

[ENTER]

Note: If you don’t know what time a scheduled item, such as a meeting,

will finish, press either ml or time, then enter the schedule item.

Ispc1

1-11

AT GUEST ROOM

TUE

Z/25/’

1:30PM-

DR. W I LSON

VISIT

-1

following the starting

Scheduling items without times

After selecting the schedule date as outlined above, schedule items can

be entered directly without a specified time, except in instances when the

data begins with a number. Simply begin by entering the letters in the

item. (In this instance, the tag marking the scheduled item on the monthly

calendar will appear on the-upper right next to the date.)

Recalling scheduled data

The following 7 methods may be used to display previously scheduled items.

Recalling today’s agenda.

2. Recalling scheduled items from the CALENDAR mode.

3. Recalling scheduled items from the SCHEDULE mode.

4. Recalling only scheduled dates (skip empty dates).

Recalling scheduled items from the SCHEDULE mode by entering the

date numerically.

6. Recalling scheduled items by using the first letter(s) of the item.

7. Recalling scheduled items with a keyword search.

Note:

When several schedule items are entered for the same day, items without a specified time are recalled first, followed by items with a specified time in chronological order. When there is more than one schedule item with the same starting time, items with an earlier finishing time are recalled first.

Recalling today’s agenda

Press

(SHIFT(

1 SCHEDULE I.

If nothing has been entered for the day, only the date will be displayed.

Recalling scheduled items from the CALENDAR mode

When a daily schedule is recalled from the CALENDAR mode, first select the CALENDAR mode and then press ( SCHEDULE ] .

For example, to recall the schedule for February 20, 1992:

1. Select the CALENDAR mode.

1 CALENDAR 1

IT-l

2. Select the 20th with the cursor keys.

lxlrlmrlm

Note: You may also recall February

20 by pressing

1-1

and

entering the date.

g2223

16 17 18 19

567

12 131415

20 ’’

23 24 25 I 26 27 28 29

922922223434 56 756 7

10 1110 11 12 13 1412 13 14

1616

17 1817 18 119 20’21119 20’21

2323

24 2524 251 26 27 28

26 27 28

11 88

1515 2222 2929

3. Recall the schedule display. [SCHEDULE 1

THU

2/20/’

lO:OOAM- 2:OOPM

ABC Project

meeting

Recalling scheduled items from the SCHEDULE mode

To recall the schedule directly from the SCHEDULE mode in forward or

reverse direction, first set the SCHEDULE mode and then press

recall the next day and future days) orr] (to recall the last and previous

days) as required.

For example, to recall the schedule for January 10, 1992 (today):

1. Select the SCHEDULE mode and display the today’s schedule.

(to

1-1

2. Recall the schedule for the next day.

The agenda for the next day will be displayed. If there are several items scheduled on the same day,

use v

chronological order.

1 SCHEDULE 1

to recall them in

FRI

SAT

1/10/‘92

l/11/*92

Recalling only scheduled dates (skip empty dates)

Press -1m items on the agenda are searched for, starting with the day appearing on the display.

repeatedly so that the days on which there are

Search for all days containing agenda items.

1 SCHEDULE

IsHlFTI

2. Press (1m

After the last agenda item has been found, “NOT FOUND!” is briefly displayed and then the previous display reappears. Pressing

(

* Pressing 1 SCHEDULE II=1

displays the oldest past agenda item. If you press the most distant future agenda item is displayed.

to recall the next agenda items.

I/\]

]

p-j

, references agenda items in reverse.

[XGJ

3:OOPW 5:OOPM

Sales

and

meetin

-1

171 ,

-1

Recalling scheduled items from the SCHEDULE mode by

entering the date numerically

You can recall the date directly from the SCHEDULE mode by numerical entry. Select the SCHEDULE mode, press with the numerical keys in accordance with the prompts. This method is handy for recalling scheduled items which are far away.

I-1

, then enter the date

For example, to recall the schedule for February 18, 1992:

1. Enter the date entry mode.

1 SCHEDULE1

-1

2. Enter the date. 02 18 1992

MM/DD/YYYY

MONTH:02 DAY YEAR

3. Recall the agenda for that date.

1 SCHEDULE 1

:18

A992

TUE 2/18,"92

3:OOPk-J 5:OOPM

Sales

Recalling scheduled items by using the first letter(s) of

the item

Enter the first letter(s) of the schedule item you would like to recall on the

display and then press Note: Be sure to enter the first letter(s) exactly as they were entered. A

difference in capital or small letters will not search properly.

to recall it.

meetin

For example, to recall the “DR.‘‘-related items scheduled after January 1992 (today):

1. Select the SCHEDULE mode. Today’s schedule is displayed.

1 SCHEDULE

]

10,

2. Enter the first letter(s). DR.

3. Begin the search.

FRI

DR.

TUE

1/10/‘92

2/25/’

1:30PM--

DR. W I LSON VISIT

Note: When a is pressed, a forward search from the displayed date

will begin for scheduled items beginning with the word “DR.“.

If m is pressed, a reverse search will take place for items scheduled before the date presently appearing on the display.

Recalling scheduled items with a keyword search

Enter any word contained anywhere in the entry, and the Organizer will

find it with -1m

Note: Be sure to enter the keyword exactly as it was entered. Adifference

in capital or small letters will not search properly.

To search for agenda items containing the word “meeting”, after January

1, 1992, for example:

1. Recall the schedule for January 1, 1992.

1 SCHEDULE 1

01 01 1992 1 SCHEDULE 1

2. Enter the keyword for the search.

meeting

WED l/

1/'92

3. Begin the search.

[sHlFTI

meet i

TUE

Sales

ng-

2/18/'92

OOPM-

OOPU

meetin

The first scheduled item containing the word “meeting” after January 1,

1992 will appear on the display.

Repeated search:

To search for additional items containing the word “meeting”, press

-1m repeatedly. When no more items containing the word

“meeting” are scheduled, “NOT FOUND!” will appear on the display.

Reverse search:

To browse back through the list of entries containing the keyword,

press

1/\1 .

Editing scheduled data

Previously scheduled data may be edited by pressing

1-1

using

l3EE-j

For example, to change “GUEST ROOM” within a schedule item on February 25, to “MEETING ROOM”:

. Once the edit mode is entered, the data may be edited directly

PI, m, ml, m

, etc.

Recall this item on the schedule for February 25.

-1

and

-1

1 SCHEDULE1

2. Enter the edit mode.

02 25 1992 1 SCHEDULE

TUE

2/25/’

1:30PM--

DR. W I

VISIT+.i

3. Move the cursor to the section to be edited and correct it.

LSONA

EDIT

1:30PM--

DR. W I VISITS AT MEETING R

4. Store the edited data.

TUE

LSONJ

EDIT

2/25/'92

1:30PM-

DR. W I LSON VISIT

Copying scheduled data

If you would like to enter a new item on a different date that has the same or similar content to a previously scheduled item, you may save time by

copying the previous entry onto the new date using the copy function and

editing it later if required. The copy function operates similarly to the edit mode, instead of pressing

-1

the data is copied onto the new date, it also remains on the previous date as it was originally entered. For example, if the “ABC Project meeting” scheduled on February 20 is also to be held at the same time on March 6, you may copy it onto the new date as follows:

1. Recall the items scheduled for February 20 and enter the edit mode.

to store the data,

-1

are pressed. After

[SCHEDULE ][=I

-102

piiFq I-Em-j

2. Change the date.

03 06

(You can also change the entire date by pressing point and reentering the entire date.)

3. Copy the data.

piiFq

rmTm-j

1992

sctimuLE

03/06/1992

lO:OOAM-

ABC

meeting

mj -1

FRI 3/

OOAM-

ABC Project meeting

2:OOPM

Project4

EDIT

6/'92

2 : OOPM

at this

(in this instance, the time and detail are stored in the memory as is without correction. If the copied data requires additional editing, it may be edited as described in “Editing scheduled data” above.)

Deleting scheduled data

Scheduled data can be deleted by the following three methods:

1. Deleting one agenda item at a time

2. Deleting the agenda for an entire month

3. Deleting all of the data in the schedule memory

Deleting one agenda item at a time

First recall the data you would like to delete on the display and delete it

with

-1

For example, to delete the “ABC Project meeting” scheduled for March 6:

1. Recall the schedule for that day.

SCHEDULE]-1

1x1

and

IT].

-1

1992 SCHEDULE

]

2. Press

3. The delete prompt appears. Press

After deletion, the next agenda item for that day or that date alone will be displayed.

IsHlFT]

jTiZiJ.

. (To retain the data, press

FRI 3/

I-iIl .)

: OOAM-

6/’

2 : OOPM

Deleting the agenda for an entire month

To delete the agenda for February, 1992, for example:

1. Select the CALENDAR mode and display the calendar for the month you would like to delete.

CALENDAR 1

Press

3. The delete prompt appears.

Press

After the agenda for the month has been deleted, the flags on scheduled dates will disappear from the calendar.

-1

. (To retain the data, press

I=[

il.

-1

02011992 CALENDAR[]

922

WI .)

4 5 6 7

9 10

11 12 13 14 15

Deleting all the data in the schedule memory

All the data in the schedule memory can be deleted using the miscel-

laneous functions.

1. Recall the miscellaneous function menu.

-1

1 FUNCTION 1

FUNCTION

MEMORY CHK

LCD CONT DATA DEL

2. Select “3 DATA DEL”. 3

3. Select “3 SCHEDULE”. 3

4. Select “1 SCHEDULE”. 1

DATA DEL TEL 1 MEMO SCHEDULE SECRET DT.

DATA DEL SCHEDULE ANN

5. The delete prompt appears. Press

. (To retain the data, press

Note: When the secret function is turned on, “SECRET ON!” will appear

on the display. In this instance, the secret function must be turned off first before the data can be deleted. (Refer to “Turning off the secret function,” page 78.)

[‘I .)

Using the schedule alarm

The Organizer schedule alarm sounds when the time for a scheduled appointment or other item on the agenda arrives. To stop the alarm after it starts beeping, simply press alarm will stop automatically after approximately 20 seconds.

Setting the alarm to ring

The schedule alarm can be set for a scheduled appointment.

1) Select an agenda item and mark it for the alarm with

2) Activate the alarm for that item with “4

Once an agenda item has been selected for an alarm and the alarm has

been turned on, the alarm will sound automatically and the relevant item

will be displayed even if the Organizer has been turned off. The alarm

can also be set to sound for secret items without displaying the item. If you do not wish to have the alarm sound at that time, you can turn the

alarm off.

Setting the schedule alarm

First display the schedule item for which you wish to set the alarm and press

for the scheduled item on the display, to indicate that the alarm has been set for that item. You can also set the alarm while you schedule an item on the agenda by pressing

However, when you press the alarm will be canceled and

For example, to set an alarm for a meeting scheduled on December 18

(“December 18, 1992, 10:00 AM-1 1:00 AM Meeting”) while entering the

schedule item:

1-j

-1

-1-1

“&”

. If

“.

appears to the left of the starting time

ml-.

while

will disappear from the display.

is not pressed, the

“&“.

“.P.”

is displayed,

1. Enter the date, time, and schedule detail.

1 SCHEDULE 1

12 18 1992 [SCHEDULE 1 10 [AM] 11

Meeting

r7Gq

FRl12/18/'92

lO:OOAM-11 :OOAM

Meet i ng

2. Set the alarm.

-1

[ALARMI

FRl12/18/'92

110:OOAIk11:OOAM

Meeting

(Once the alarm has been set for the schedule item, before the scheduled starting time.)

3. Store the item.

“&”

appears

FRl12/18/'92

110:00AM41:00AM

Meeting

(“Q ” will appear.)

The alarm will sound at the starting time of the meeting.

“0”

appears or disappears each time

Note: If the time of the schedule item for which you wish to set the alarm

has already passed, the following message appears on the display.

1-1

m are pressed.

After the alarm sounds,“

remain in memory without “ If

“Q”

is turned off and the set alarm time has passed,

front of the scheduled item.

J$”

will disappear and the scheduled item will

.lir. “.

“&”

will remain in

Anniversaries (date, label) can be stored in the Organizer. Once a date is designated as an anniversary, the date will be an anniversary for every year from 1901 to 2099. Thus, the anniversary function serves as a mnemonic aid for these important personal dates. Note: Anniversary data cannot be coded as secret data.

Entering anniversaries

To enter “NANCY’S BIRTHDAY” on February 12, for example,

described below.

1. Select the ANNIVERSARY mode.

[ANNj

M/D=- /

2. Enter the date.

proceed as

M=MONTH D=DAY

02 12

3. Enter the label. NANCY’S

pTEiq

1-11

BIRTHDAY

2/12

-1

2/12

NANCY’S BIRTHDAY

Recalling anniversaries

After selecting the ANNIVERSARY mode, anniversaries are recalled in calendar sequence each time

1. Select the ANNIVERSARY mode.

2. Recall the anniversary.

171

is pressed.

z/12

NANCY’ S BIRTHDAY

Note:

Each time

recalled in calendar sequence (forwards or backwards).

I^]

is pressed, the next entry will be

Checking anniversaries

After pressing anniversaries in that month will be displayed while Check whether there are any anniversaries in February.

1. Display the calendar.

1 CALENDAR 1

02 01

(Valid for any year.)

2. Display the anniversaries.

[sHlFTI

1992

(Displayed while pressed.)

1x1

ImI

[CALENDAR 1

in a monthly calendar display, the

‘;2 3 4 5 6 7

z 9 10 11

161718 192021 23 24 25 26 27 28 29

is held.

12 13 14 15

Note:

If there are no anniversaries in the specified month, the display on the right will appear:

Editing anniversaries

To edit an anniversary entry, for example, such as changing “NANCY’S

BIRTHDAY” to “CATHY’S BIRTHDAY”:

1. Recall the entry, “February 12th, NANCY’S BIRTHDAY”.

pm-l

(Press

appears.)

2. Enter the edit mode.

IT/

repeatedly until the “NANCY’S BIRTHDAY”

3. Move the cursor to the letter you wish to correct and correct it.

To correct the date, first enter the edit mode, then press

date flashes, enter the correct date and press

-1

until the

Note: If

the correction, data can be copied. (Refer to “Copying scheduled

data,” page 41)

-1

are pressed instead of

-1

after

Deleting anniversaries

Deleting one entry

To delete the “CATHY’S BIRTHDAY” entry, for example:

1. Recall the entry “CATHY’S BIRTHDAY”.

(Press II repeatedly until “CATHY’S BIRTHDAY” appears.)

2. Press

IsHlFTI -1.

2/l 2

CATHY’ S

IB]$M=LI’

3. The delete prompt appears. Press

. (To retain the data, press

ml .)

Deleting all the entries

Recall the miscellaneous function menu.

1 FUNCTION

]

FUNCTION

MEMORY CHK LCD CONT DATA DEL

2. Select “3 DATA DEL”. 3

3. Select “3 SCHEDULE”.

4. Select “2 ANN”. 2

DATA DEL TEL u MEMO SCHEDULE

SECRET DT.

DATA DEL SCHEDULE ANN

5. The delete prompt appears. Press

. (To retain the data, press

Note: When the secret function is turned on, “SECRET ON!” will appear

on the display. In this instance, the secret function must be turned off first before the data can be deleted. (Refer to “Turning off the secret function,” page 78.)

WI .)

The telephone directory stores the names, telephone numbers, and addresses of business clients, companies, personal friends and so on.

The Organizer’s telephone directory is actually three different telephone directories in one and other listings separate.

(TELl,

TEL2, and TEL3) for keeping business, private,

Designating the file names

The file names for the different directories (business, private, etc.) can be input from the miscellaneous function mode. Input directory file names of

10 letters or less as follows:

1. Recall the miscellaneous function menu.

TEL FILENAME

(The prompt for entering the direc-

tory file name will appear.)

2. Store the directory file names.

TEL TEL TEL

1x1 [Xl

If you do not wish to assign a file name to a directory, skip this step by pressing

To discontinue the entry of a directory file name, press

When “CAPS” appears on the display, capital letters are entered, and

Business Private

(7XiEi?J

-1

twice.

when not, small letters are entered. Pressing

between capital and small letters.

1-1

alternates

Entering listings

Telephone listings can be entered into any of the three directories.

Pressing presses display the TEL2, TEL3, and again the TEL1 directories.

IT]

for the first time displays directory TEL 1. Subsequent

Press

TEL1

(Display the file name.)

Entering telephone listings into the TEL1 directory

To enter two sample listings into the TEL1 directory, follow steps 1 to 5 below:

EDWARDS BOB

DAVIS MIKE

1. Select the TEL mode.

pEq

(Press

TEL1 directory name appears.)

2. Enter the name of the first party.

. TEL2

Press

201-265-5600

214-456-7890

repeatedly until the

FAX 2651869 President,

Press

. TEL3

Davis Assoc.

*Business

NAME ?

AbC

Co.

EDWARDS BOB

-1

EDWARDS BOB NUMBER ?

3. Enter the party’s telephone number and fax number. 20 l-265-5600

FAX 2651869

-1

EDWARDS BOB

201-265-560s

ADDRESS ?

4. Enter the person’s position and company name, etc. President

AbC Co.

1-1

EDWARDS BOB

201-265-5600 FAX 265-1869

President

Notes:

To skip the party’s telephone number or company name and address, simply press

l Check the listing for mistakes before pressing

are, correct them using the cursor keys (

-ENTER]

-1

to “Editing listings,” page 58.)

5. Enter the next listing, “DAVIS MIKE”, in the same manner.

DAVIS MIKE 2 14-456-7890 Davis Assoc.

-1

. If you find any mistakes after you have already pressed , then correct the listing using the editing function. (Refer

at this point.

-1

-1 m

[ENTER]

-1

m, I,

-1

, and

[TI,

and then press

. If there

m, m),

DAVIS MIKE

214-456-7890

Dav i s Assoc.

Entering listings into the TEL2 directory:

JONES JACK 708-759-8555 Romeoville, Illinois

1. Display the TEL2 directory.

1 TEL 1

(Press

TEL2 directory name appears.)

-1

repeatedly until the

*Pr i vate

2. Enter listings as for

JONES JACK

708-759-8555 1 ENTER 1 Romeoville Illinois [ ENTER 1

Recalling listings

The telephone listings are stored in the order described on page 61. There are three methods of retrieving telephone listings.

1. Sequential search, which retrieves the listings in alphabetical order

2. Direct search using the first letter(s) of the party’s name

3. A keyword search for any word contained in the listing

TELl.

-1

JONES JACK

708-759-8555

Romeoville

II I inois

Recalling a listing with a sequential search

1. Select the TEL1 directory.

(Press 1 TEL 1 repeatedly until the TEL1 directory name appears.)

2. Recall the first listing.

DAVIS MIKE

(When m is pressed, a search of the listings begins in alphabetical order.)

3. Recall subsequent listings.

214-456-7890

Dav i s Assoc.

EDWARDS BOB

201-265-5600 FAX 265-1869

President

Note: Pressing m recalls the listings in reverse order.

Recalling a listing with a direct search

PressI], then enter the first letter(s) of the party’s name and press

. Capital and small letters must be entered exactly as they were

originally entered.

To recall a listing which starts with “E”, for example, in the TEL1 directory, first select the TEL mode.

EDWARDS BOB

201-265-5600 FAX 265-1869

President

Subsequent entries will be searched in sequential order, from the

listing displayed.

Recalling a listing with a keyword search

To perform a keyword search, press contained in the desired listing and press IIm

Note: Capital and small letters must be entered exactly as they were

originally entered.

Recall listings containing the word “AbC Co.“, for example, in the TEL1

directory. First select the TEL mode.

1-1

AbC Co.

[-I

, then enter any word

EDWARDS BOB

201-265-5600

FAX

265-l 869

President

Each time the word “AbC Co.” will be displayed.

are pressed, successive listings containing

Editing listings

To edit a listing, recall it, and then press edit mode.

Use

you may type over the data. Or, press cursor to “ 4 ” and you may insert new data.

To add the name “SHARP CORP.” to the listing for “JONES JACK” in the TEL2 directory, for example:

1. Select the TEL2 directory and recall the listing for “JONES JACK”.

(Press m repeatedly until the listing appears.)

-1

ml(1

to delete data. With the cursor “

1-1

to enter the

m(NS

to change the

”

2. Enter the edit mode.

pi7-l

JONES

JACK4

708-759-8555

Romeoville+l

EDIT

3. Move the cursor to the end of the address to add the company name using the cursor movement keys.

1-q p-j p-j p-l l,I...pJ

708-759-8555 4

RomeovilleJ

4. Press

1-11

and enter the company name.

SHARP CORP.

-1

II I inois

EDIT

708-759-8555

Romeoville

Note: If

the correction, data can be copied. (Refer to “Copying scheduled data,” page 41)

are pressed instead of

Deleting listings

Either single listings or an entire directory

deleted as required.

Deleting single listings

1. Select the directory containing the listing to be deleted or TEL3).

(TELl,

TEL2, or TEL3) can be

(TELI,

after

TEL2,

2. Recall the listing to be deleted. Press

several times until the listing is displayed.

3. Delete the entry with

4. The delete prompt appears. Press

[VI

. (To retain the data, press

Deleting entire directories

Any one of these directories can be deleted separately by using the

miscellaneous function “DATA DEL”.

To delete TEL2, for example:

1. Recall the miscellaneous function menu.

1 SHIFT ] 1 FUNCTION 1

2. Select “3 DATA DEL”. 3

-1

-1.

(TELI,

WI .)

TEL2, or TEL3)

DATA DEL TEL H MEMO SCHEDULE SECRET DT.

3. Select “1 TEL”.

4. Select “2 2

TEL2”.

DATA DEL

TEL1

TEL2 TEL3

TEL2

5. The delete prompt appears. Press

Note:

The characters are sorted in the following order:

Iv]

.(To retain the data, press

When the secret function is turned on, “SECRET ON!” will appear on the display. off first before the data can be deleted (Refer to “Turning off the secret function,” page 78.)

In this instance, the secret function must be turned

PI .)

The Organizer’s memo function conveniently stores odd bits of information

not appropriate for the schedule or other directories.

Entering memos

To enter the following two items, for example:

“X’mas presents, Jill sweater, Mother ring” “ABC BANK Chicago Branch, Account No. 272-0011223”

1. Select the MEMO mode.

[hnEMo(

MEMO ?

2. Enter the data.

X’mas presents Jill 1 SPC 1 sweater

Mother 1 SPC 1 ring

1-11

X’ mas presen

Jill sweater Mother

ring-

3. Store the entry.

1 ENTER 1

X’ mas presen

ts Jill sweater Mother ring

4. Store the second memo in the same manner. ABC

Chicago Branch Account No.

-1

BANK

1-11

272-0011223

ABC BANK Chicago Bran ch Account No.

Recalling memos

The following three methods can be used to recall memos.

1. Sequential search in the order of entry: Press m to display each memo in the order it was entered. Press m to reverse the order of display.

2. A direct search for the first letter(s) of the entry: Enter the first letter(s) of the memo entry. Press m to search

forward. Press m to search backward.

Subsequent memos will be displayed in sequential order each time you press

3. Keyword search for a key word contained in a memo: Enter any word or part of a word contained in the memo and press 1 SHIFT 1

-1m initiates a forward search.

a reverse search.

or 1/\1 .

-1

1/\1 .

-1

Ir\l

initiates

Recalling memos with a sequential search

Each time

IAl

Select the MEMO mode and recall the data.

is Dressed. data is recalled in the order of entry. When

presz,

data is searched in reverse order.

X’ mas presen

Jill sweater Mother ring

Each time m is pressed, the next item is displayed.

If you press

appear on the display.

Reverse search works in the same manner.

after the last entry is displayed, “NOT FOUND!” will

Recalling memos with a direct search

The first letter(s) of the memo can be searched. To continue the search,

press m or 1/\1 repeatedly. The data will be recalled in the forward or reverse order of entry starting with the memo searched. To search for a memo beginning with the letter “A”, for example:

Select the MEMO mode, then search for a memo entry starting with the

letter “A”.

[MEMO/Am

ABC BANK Chicago Bran ch Account No.

Recalling memos with a keyword search

With the keyword search function, the memos containing the key word are

searched out in sequence. To perform a keyword search for memos containing the word “Act”, for example:

Enter the keyword in the MEMO mode.

mlAcc[]

ABC BANK Chicago Bran

Account No.

(The first memo containing the word

Subsequent memos containing the same word can be recalled in order each time you press

“Act”

will be displayed.)

-1

Editing memos

Memo editing capabilities are similar to those in the SCHEDULE and TEL modes. For example, to change “Chicago Branch” to “Boston Branch” in the memo

for ABC BANK:

1. Recall the memo containing “ABC BANK”.

2. Enter the edit mode.

ABC Chicago Bran

chS

Account No. $

BANKS

EDIT

3. Correct “Chicago” to “Boston”.

[rl

Boston

[DEL]

Boston Branc

4. Store the revised version.

]

ENTER

]

Account No.

EDIT

+.I

ABC BANK Boston Branc h Account No.

Note: If ] SHIFT I I ENTER ] are pressed instead of [ENTER] after

the correction, data can be copied. (Refer to “Copying scheduled

data,” page 41)

Deleting memos

Either single memos or the entire memo list can be deleted as follows:

Deleting single memos

Recall the memo you wish to delete on the display and press [SHIFT]

-1.

press For example, to delete the memo “X’mas presents”:

The delete prompt appears. Press

w] .)

Iv]

(To retain the data,

1. Select the MEMO mode and recall the data.

p7-J

(Press m repeatedly until the memo item “X’mas presents” appears.)

2. Press

-1

I[.

X’mas presen

Jill sweater

[gquaa-y

3. The delete prompt appears. Press

VI.

(To retain the data, press

* After the deletion, the next item will appear.

ITi .)

Deleting entire memos

All the memos can be deleted at once using the miscellaneous function

mode as follows:

1. Recall the miscellaneous function menu.

2. Select “3 DATA DEL”. 3

3. Select “2 MEMO”. 2

DATA DEL TEL d MEMO SCHEDULE SECRET DT.

4. The delete prompt appears. Press

I].

(To retain the data, press

in this instance, as we will need to save this data for future examples,

press

IT].

Note: When the secret function is turned on, “SECRET ON!” will appear

on the display. In this instance, the secret function must be turned off before the data can be deleted. (Refer to “Turning off the secret function,” page 78.)

INI.)

The Organizer’s built-in calculator can perform the four arithmetic calculations with up to IO digits.

To use the calculator function, simply press

-1

CALCULATOR mode.

Using the Organizer in the

CALCULATOR mode

Before performing any calculation, press display.

Example

12x3+5=

(-24) 34 + 57 =

45 + 57 = 48 - 23 =

14-23=

68 x 25 =

-40

35 + 14= 98 f 14=

What is 10% of What percentage is 9 of

4-2~

200?

36?

Operation

p-1

1+/-l

1+157 m

45 48

I-1

It114 I=[

200~~10

1-K-l

ItI

The addend becomes

a constant.

Fl m

becomes a constant.

a constant.

j-%l

-1

The

subtrahend

The multiplicand

a constant.

The divisor becomes

to select the

twice to clear the

Display (answer)

41.

-8.

91.

102.

25.

-9.

1700.

2720.

2.5

20.

25.

Example

What results from a 10%

increase of 200? What is 500 after a 20%

discount?

42C-G (4q2

118

Calculate the percent change between two yearly sates figures, $620,000 one year and $500,000 the previous year.

Calculate the selling price and the gross profit from a cost of $8.16 on the basis of a 15% profit on the selling price.

Calculate the cost and the gross profit from a selling price of $100 on the basis of a 25% profit on the cost.

(Summation)

25x5=

-)84+3=

+) 68+17=

(Total) =

Operation

620000

Clear the memory before performing any calculations

I-1

500000

Display (answer)

220.

400.

4096.

0.125

1.44 (Gross

-M-

-M- 85.

-M-

24.

9.6 (Selling price)

profit)

80. (Cost)

20. (Gross profit)

125.

28. .

182.

(Temporary memory) (14 - 3 x 2) x (52 - 35) =

(Constant memory)

135 x (12 + 14) =

(12+14) f

Non-zero numbers in the memory cause ‘I-M-” to appear on the display.

-M-

-M- 26.

-M- 3510.

-M- 5.2

136.

When the error message appears

When any of the following occur, an error is registered and ‘I-E-” appears.

Press

1x1

input.

to cancel the error. The following are examples of error

Example

Example 2:

Example 3:

1: The integer section in the calculation result has a range of

4567890123

(208.2957896 x

A number is divided by 0.

exceeds 10 digits.

Example 4:

The integer section of the calculation result exceeds 20 digits.

11 to 20 digits (rough estimate).

-E-

456

The integer section in the numerical value of the memory

10”

l-m-l

9999999999 IM+

1000000000

208.2957896

2,082,957,896,000)

0.000000001 r%-J

r-m-j

The Secret function allows you to protect confidential data with a password

so that no unauthorized person can access it. You may mark certain entries as private; displaying or modifying such data requires the password. Data can also be classified from the SCHEDULE, TEL, and MEMO modes.

Registering a password

Press I]-1

pear, then enter your password. Press

is now set to operate and “ up to seven letters, numbers, spaces, or symbols (except

the password successfully, you must enter it exactly as you entered it,

without, for example, changing capital letters to small or vice versa.

and the password entry prompt will ap-

-1

”

will appear. The password can contain

. The secret function

a ).

To recall

important:

If you ever forget the password, you will have to erase all

your secret data.

never forget.

Make sure the password is one you will

To register “1234” as the password, for example:

Recall the password entry prompt.

piTwl

ri%EEEq

PASSWORD SET

Note: If a password has been previously registered, “SECRET OFF” will

be displayed instead. If this occurs, refer to “What to do if you forget the password” on page 82 and delete the previous password and secret data.

The Secret function allows you to protect confidential data with a password

Registering a password

Press vj-1

pear, then enter your password. Press

is now set to operate and ‘I

up to seven letters, numbers, spaces, or symbols (except the password successfully, you must enter it exactly as you entered it,

without, for example, changing capital letters to small or vice versa.

important: If you ever forget the password, you will have to erase all

To register “1234” as the password, for example:

Recall the password entry prompt.

and the password entry prompt will ap-

your secret data. never forget.

1-1

”

will appear. The password can contain

Make sure the password is one you will

. The secret function

m ).

To recall

piTiq

PASSWORD SET

Note: If a password has been previously registered, “SECRET OFF”

be displayed instead. If this occurs, refer to “What to do if you forget the password” on page 82 and delete the previous password and secret data.

will

Enter “1234” as the password.

1234

3. Store the password in the memory.

-1

Make sure it is right! This is the last time you will ever see the password.

After the password is registered, the secret function is set to operate

IsI ” will appear. After rechecking the password, press

and

”

pcq

;

Coding data as secret data

Any entry can be coded as secret data by pressing so that

“JR”

appears. Data coded with ‘W’ cannot be recalled until the

secret function is turned off by entering the password.

Coding previously stored data as secret data

Recall the item which you wish to encode, enter the edit mode and mark that item with To

convert the “ABC BANK” entry in the MEMO mode to secret data, for

“W.

example:

1. Recall “ABC BANK”.

I-I-\

ABC BANK

Boston h

Branc

Account No.

Is) 4

Sharp ZQ-2400, ZQ-2200, ZQ-2000 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual