Sharp XL-HF202PH, XL-HF202S, XL-HF302PH, XL-HF202BK, XL-HF302T User Manual
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/support
MODEL
XL-HF202PH(S)
Customers without internet access may telephone
0845 880 0512 during office hours (or (01) 676 0648
if telephoning from Ireland).
XL-HF202PH(BK)
XL-HF302PH(T)
HI FI COMPONENT SYSTEM
This Quick Start Guide will help you to correctly install and operate your system.
1 Accessories
Remote control x 1
RRMCGA334AWZZ
“AA” size battery
(UM/SUM-3, R6, HP-7
or similar) x 1
Stand for iPad x 1
NFC tag x 2
2 Remote control battery installation
Use “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
1 Open the battery cover.
2 Insert the batteries as shown.
3 Close the cover.
3 System connections
Right
speaker
FM
aerial
TV
To TV audio
output socket
Speaker wires x 2
(for XL-HF202PH(S) /
XL-HF202PH(BK))
Audio cable
(not supplied)
To LINE
input
socket
Speaker wires x 2
(for XL-HF302PH(T))
To audio input
socket
FM aerial x 1
Commercially
available
Subwoofer
(Amplifi er
Built-In)
Velcro tape
(hook type) x 2
Velcro tape
(loop type) x 3
TINSEA452AWZZ
Left
speaker
Red
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
13H R MW 1
4 Turn on your system
Press the ON/STAND-BY button to turn the power on.
5 Bluetooth one touch connection via NFC
This audio system supports NFC-enabled device with Android 4.1,
Jelly Bean and higher.
NFC tag set up
The NFC tags can be placed anywhere convenient to you. The
velcro tapes supplied will help to secure the tags onto the desired
location.
Caution :
Make sure that the NFC tag is placed on a flat and level surface.
If you choose not to use the velcro tape, do not place the
NFC tag near metal surface to avoid connection interference
during tagging.
Keep all small parts away from children as they may be
accidentally swallowed.
Peel the separator off the velcro tape (loop type) and stick it on a
1
desired surface.
separator
velcro tape
(loop type)
Peel the separator off the velcro tape (hook type) and stick it to
2
the rear of the NFC tag. Then place the tag onto the desired
location.
separator
rear view of the NFC tag
velcro tape
(hook type)
NFC connection for audio playback
Check that :
Your device (smartphone / tablet) has an NFC function.
NFC function on your device is turned on.
Screen lock function of the device is off.
This unit is not in Eco mode.
Touch your device to the supplied NFC tag.
1
A pop-up window asking whether to proceed
2
with the Bluetooth connection appears on
the device. Select <YES>.
The ‘connected’ message appears when
the connection is complete.
Playback will start automatically. Otherwise, press play (on
3
remote control or source device).
Sound will be heard from the speakers of this unit via audio
streaming.
Your device and NFC tag must be within 10 meters from the
unit.
Bluetooth operation buttons (remote control only)
Note :
To listen to audio via Bluetooth connectivity without NFC tag refer “Pairing with other Bluetooth source devices” on page 8
of the operation manual.
To disconnect, simply touch your device to the tag again.
Press the button to play or pause.
Press the button to skip up.
Press and hold to fast forward.
Press the button to skip down.
Press and hold to fast reverse.
NFC tag
6 Listening on Android
Insert the connector to the device.
1
(Smartphone/Tablet)
Connect the device to the main unit via USB connector.
2
Device
Connector
USB connector
(not supplied)
TM
devices
Android device playback
Press the ON/STAND-BY button to turn the power on.
1
Press the USB button (remote control) or FUNCTION button
2
repeatedly (main unit) to select USB function.
Connect the device (Smartphone/Tablet) to the unit.
3
Press the play button (on main unit, remote control or device).
4
To disconnect the Android device
1
Quit the application (apps).
2
Disconnect the device from the USB terminal.
Loading...