Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
XL-DV50H DVD Micro System consisting of XL-DV50H (main unit), CPDV50HF (front speakers) and CP-DV50HSW (subwoofer).
03/8/20XL-DV50H(A)_FRONT.fm
TINSEA027SJZZ
XL-DV50H
Special notes
WARNINGS
! When the ON/STAND-BY button is set at STAND-BY position,
mains voltage is still present inside the unit. When the ON/
STAND-BY button is set at STAND-BY position, the unit may be
brought into operation by the timer mode or remote control.
! This unit contains no user serviceable parts. Never remove cov-
ers unless qualified to do so. This unit contains dangerous voltages, always remove mains plug from the socket before any
service operation and when not in use for a long period.
! To prevent fire or shock hazard, do not expose this appliance to
dripping or splashing. No objects filled with liquids, such as
vases, shall be placed on the apparatus.
Important Instruction
CAUTION
! This product is classified as a CLASS 1 LASER product.
! Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
As the laser beam used in this unit is harmful to the eyes, do not
attempt to disassemble the cabinet. Refer servicing to qualified
personnel only.
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
Accessories
Please confirm that the following accessories are included.
XL-DV50H
1
Manufactured under license from Dolby Laboratories. "Dolby" and
the double-D symbol are trademarks of Dolby Laboratories.
Copyright Information:
! Unauthorised copying, broadcast, public display, transmission,
public performance and rental (regardless of whether or not
such activities are for profit) of disc contents are prohibited by
law.
! This system is equipped with copy protection technology that
causes substantial degradation of images when the contents of
a disc are copied to a videotape.
Copy Protection:
This unit supports Macrovision copy protection.
On DVD discs that include a copy protection code, if the contents of
the D VD disc are copied using a VCR, the copy protection code prevents the videotape copy from playing normally.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216,
4,819,098, and 4,907,093, licensed for limited viewing uses only.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other
rights owners.
Use of this copyright protection technology must be authorised by
Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision
Corporation.
The RDS function does not work in Australia and New Zealand.
Icons used in this operation manual
Some functions may not be available depending on discs. The following icons indicate the discs that can be used in the section.
... Indicates DVDs.
... Indicates video CDs.
... Indicates audio CDs.
... Indicates CD-R/RW with MP3 recording.
... Indicates CD-R/RW with JPEG recording.
! Some operations may not be performed depending on discs
even if they are described in this manual.
! During operation, " " may be displayed on the screen. This
means that the operations described in this manual are prohibited by the disc.
04/3/19XL-D V50H(A).fm
TINSEA027SJZZ
Types of playable discs
The unit can play back discs bearing any of the following marks:
Disc typeDisc contentsDisc size
DVD Video DiscAudio and video
(movies)
Or DVD-R/DVD-RW/DVD+R/
DVD+RW recorded in video
mode (*1)
Video CDAudio and video
(movies)
12 cm (5")
8 cm (3")
12 cm (5")
8 cm (3")
(*1): Discs including DVD-R/DVD-RW/DVD+R/DVD+RW may not be
played back due to properties and scratches on the disc, dirty
optical pickup lens, etc.
(*2): Only the audio on the CDV can be played.
(*3): The CD-R/CD-RW may not be played back properly depending
on the recording equipment or the disc.
(*4): If the sampling frequency is 44.1 or 48.1 kHz and the fixed bit
rate is 128 kbps or higher, MPEG 1 Audio Layer 3 (MP3) files
can be played. However, some of them may not be played de-
pending on their conditions or formats.
(*5): JPEG or JPG picture discs also play on this unit. However, pic-
tures may not be clear (depends on resolution and recording
method).
! For unplayable discs, see page 7.
XL-DV50H
1
2
3
4
5
Audio CDAudio12 cm (5")
8 cm (3")
Or CDV (*2)
CD-R/CD-RW (*3)Audio and picture12 cm (5")
8 cm (3")
CD-R/CD-RW recorded in MP3 format (*4), JPEG
format (*5)
04/3/19XL-D V50H(A).fm
6
7
General Information
8
9
10
5
TINSEA027SJZZ
XL-DV50H
Description of discs
" Icons used on DVD discs
Check the icons on the DVD case before playing your discs.
DisplayDescription
Region number (playable area number)
1
4
4
Format recorded on the DVDTo adopt the video format to the connected TVs ("wide-screen TV" or "4:3 size TV").
Recorded in 4:3.
You can enjoy wide images on a wide-screen TV, and letterbox size images on the 4:3 size TV.
You can enjoy wide images on a wide-screen TV and 4:3 images with the side edges cut on the 4:3 size TV.
Type of subtitles recordedRecorded subtitle languages.
Example:Language can be selected with the SUB TITLE/SURROUND button.
2
1: English
2: French
Number of camera anglesNumber of angles recorded on the DVD.
General Information
2
Number of audio tracks and audio
recording systems
Example:! The audio recorded on the DVD can be switched by using the ZOOM/AUDIO button.
1: Original <English> (Dol-
by Digital 5.1 Surround)
2: English (Dolby Digital 2
Surround)
ALL
6
DVD discs are programmed with region numbers indicating countries in which they can be played.
This system can play discs with region number "4" or "ALL".
Angles can be selected with the ANGLE button.
The number of audio tracks and audio recording systems are indicated.
! The number of audio tracks and recording systems vary depending on the DVD. Check them in
the DVD's manual.
6
04/3/19XL-D V50H(A).fm
TINSEA027SJZZ
XL-DV50H(A) TINSEA027SJZZ
2
" Discs that cannot be played
! DVDs without the region num-
ber "4" or "ALL".
! DVDs with SECAM system! CD-ROM
! DVDs with MPEG sound! SACD
! DVD-ROM! Discs recorded in special for-
! DVD-RAM
! The discs above cannot be played at all, or no sound is heard
although images appear on the screen or vice versa.
! Faulty playback may damage the speakers and can have an
adverse effect on your hearing when played at high volume settings.
! You cannot play illegally produced discs.
Notes:
! A disc with scratches or fingerprints may not play properly. Refer
to "Care of discs (page 56)" and clean the disc.
! Do not play the discs of special shapes (heart or octagon
shaped) as they can be ejected whilst rotating and cause injury .
! DVD-Audio
! CDG
! Photo CD
mats, etc.
" Title, chapter and track
DVDs are divided into "titles" and "chapters". If the disc has more
than one movie on it, each movie is a separate "title". "Chapters" are
subdivisions of titles.
Title 1Title 2
Chapter 1
Video CD and audio CD are composed of "tracks". Tracks are equivalent to songs on a CD.
Note:
Title, chapter, or trac k numbers may not be recorded on some discs.
MP3, JPEG discs consist of "folders" and "tracks".
MP3
JPEG
disc
disc
Chapter 2Chapter 3Chapter 1Chapter 2
Track 1 Track 2 Track 3 Track 4
Folder 1
Folder 2
XL-DV50H
1
2
3
4
5
6
7
General Information
8
Track 1
Track 2Track 1
04/3/19XL-D V50H(A).fm
Track 2Track 3
7
TINSEA027SJZZ
9
10
XL-DV50H
Precautions
" General
! Please ensure that the equipment is positioned in a well venti-
lated area and ensure that there is at least 10 cm (4") of free
space along the sides, top and back of the equipment.
10 cm (4") 10 cm (4")
! Use the unit on a firm, level surface free from
vibration.
! Keep the unit away from direct sunlight,
strong magnetic fields, excessive dust,
humidity and electronic/electrical equipment (home computers, facsimiles, etc.)
which generate electrical noise.
! Do not place anything on top of the unit.
General Information
! Do not expose the unit to moisture, to temperatures higher than
60°C (140°F) or to extremely low temperatures.
! If your system does not work properly, disconnect the AC power
lead from the wall socket. Plug the AC power lead back in, and
then turn on your system.
! In case of an electrical storm, unplug the
unit for safety.
10 cm (4")
10 cm (4")
! Do not remove the outer cover, as this
may result in electric shock. Refer internal service to your local SHARP service
facility.
! The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, tablecloths, curtains,
etc.
! No naked flame sources, such as lighted candles, should be
placed on the apparatus.
! Attention should be drawn to the environmental aspects of bat-
tery disposal.
! This unit should only be used within the range of 5°C - 35°C
(41°F - 95°F).
Warning:
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of acci-
dent causing damage. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage other than that
which is specified.
" Volume control
The sound level at a given volume setting depends on speaker effi-
ciency, location, and various other factors. It is advisable to avoid
exposure to high volume levels. Do not turn the volume on to full at
switch on and listen to music at moderate levels.
! Hold the AC power plug by the head when
removing it from the wall socket, as pulling
the lead can damage internal wires.
8
04/3/19XL-D V50H(A).fm
TINSEA027SJZZ
Contr o ls an d in dic ators
1
2
3
4
5
6
7
8
9
32145687910
About "Using the Radio Data System (RDS)":
The RDS function does not work in Australia and New Zealand.
35. Volume or Subwoofer Level Up a n d D own Buttons . . . . . 18
Reference page
XL-DV50H
1
2
3
4
5
6
7
General Information
8
9
10
11
04/3/19XL-D V50H(A).fm
TINSEA027SJZZ
XL-DV50H
System connections
Make sure to unplug the AC power lead before any connections.
Aerial connection (see page 13)
Preparation for Use
FM aerial
Speaker connection (see page 13)
AM loop aerial
Front speaker (left)Front speaker (right)Subwoofer
Wall socket
(AC 230 - 240 V, 50 Hz)
Connecting the AC power lead (see page 16)
TV
TV connection
(see pages 14 - 15)
12
04/3/19XL-D V50H(A).fm
TINSEA027SJZZ
! Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS
socket and position the FM aerial wire in the direction where the strongest signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP
socket. Position the AM loop aerial for optimum
reception. Place the AM loop aerial on a shelf,
etc., or attach it to a stand or a wall with screws
(not supplied).
Note:
Placing the aerial on the stereo system or near the AC power lead
may cause noise pickup. Place the aerial away from the stereo system for better reception.
Installing the AM loop aerial:
< Assembling >< Attaching to the wall >
Wall Screws (not supplied)
External FM aerial:
Use an external FM aerial if you require better reception. Consult
your dealer.
External FM aerial
! Speaker connection
Insert the front speaker plugs (black) into the FRONT terminals.
Insert the subwoofer plug (red) into the SUBWOOFER terminal.
Subwoofer
Caution:
The supplied speakers are exclusively for XL-DV50H. Do not
"
connect them to other equipment, and do not connect other
speakers to XL-DV50H. It may cause malfunction.
Use speakers with an impedance of 6 ohms or more, as lower im-
"
pedance speakers can damage the unit.
Do not mistake the right and the left channels. The right speaker
"
is the one on the right side when you face the unit.
Do not allow any objects to fall into or to be placed in the bass re-
"
flex ducts.
Do not stand or sit on the speakers. You may be injured.
"
Front speaker
(right)
Speaker or subwoofer plug in with the rising
side facing to the right.
Black
Red
Front speaker
(left)
! Front speaker grills are removable
Make sure nothing comes into contact with the
speaker diaphragm when you remove the
speaker grilles.
XL-DV50H
Preparation for Use
1
2
3
4
5
6
7
8
9
04/3/19XL-D V50H(A).fm
10
13
TINSEA027SJZZ
XL-DV50H
System connections (continued)
14
! Placing the speaker system
Same distance
Front speaker
(left)
Notes:
Place the TV halfway between the front speakers.
"
The bass sound from the subwoofer is omni-directional, however,
"
it is recommended to place it as close as left and right speakers.
The subwoofer vibrates whilst reproducing bass. Place it on a
"
stable sturdy surface.
Keep the free space of at least 10 cm (4") along the right side of
"
the subwoofer .
Same distance
Front speaker
(right)
! Magnetically shielded speakers
The speakers are magnetically shielded.
Therefore, they do not affect the display even you use them near the
TV. However, some colour variation may occur, depending on the
type of TV used.
Preparation for Use
If colour variation occurs...
Turn off the TV (from the power switch).
After 15 - 30 minutes, turn the TV on again.
If the colour variation is still present...
Move the speakers further away from the TV.
If any kind of magnet or an electromagnet is placed too close to the
TV and the system, irregular colours may appear on the TV screen.
Subwoofer
! TV connection
Three types of sockets (VIDEO OUT, S-VIDEO OUT and SCART
OUT) are available for connection of a TV and this unit. Connect
according to your TV.
Connecting to a TV with a video input socket:
You can enjoy DVD images by connecting your TV and this unit with
the supplied video cable.
Set the video output mode to "S-Video" (default setting). For the
procedure, refer to "Changing the initial setting of DVD" on pages
44, 46.
Video signal
Video cable (supplied)
TV
To video
input socket
Change the input mode on the TV accordingly.
Press the SHIFT button and ANGLE/NTSC/PAL button on the remote control.
Each time these buttons are pressed, the mode will change in the
following order:
NTSC
PAL
Select this mode for the NTSC TV.
Select this mode for the PAL TV.
04/3/19XL-D V50H(A).fm
TINSEA027SJZZ
XL-DV50H(A) TINSEA027SJZZ
3
Connecting to a TV with an S-video input socket:
If your TV is equipped with an S-video input socket, you can enjoy
higher quality images by connecting it with an S-video cable (not
supplied).
Set the video output mode to "S-Video" (default setting). For the
procedure, refer to "Changing the initial setting of DVD" on pages
44, 46.
Video signal
S-video cable
(commercially available)
TV
To S-video
input socket
Note:
When the video and S-video cables are both connected, the images
from the S-video input socket appears on your TV.
Connecting to a TV with SCART socket:
If your TV is equipped only with a SCART input socket (without
video), connect a SCART cable (not supplied) to enjoy images.
Set the video output mode to "SCART". For the procedure, refer
to "Changing the initial setting of DVD" on pages 44, 46.
TV
To SCART input
socket
Video signal
SCART cable (commercially available)
Notes:
Change the TV input in accordance with the connected socket.
"
Do not connect other equipment (VCR, etc.) between the TV
"
and this unit. Pictures may be distorted.
Refer to the operation manual of the equipment to be connect-
"
ed.
Insert the plugs fully to avoid fuzzy pictures or noise.
"
XL-DV50H
Preparation for Use
1
2
3
4
5
6
7
8
9
04/3/19XL-D V50H(A).fm
10
15
TINSEA027SJZZ
XL-DV50H
System connections (continued)
! Connecting the AC power lead
After checking all the connections have been made correctly, connect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket. If you plug in the unit
first, the unit will enter the demonstration mode.
Wall socket
(AC 230 - 240 V, 50 Hz)
Notes:
Never use a po wer lead other than the one supplied. Otherwise , a
"
malfunction or an accident may occur.
Unplug the AC power lead from the wall socket if the unit will not
"
be in use for a prolonged period of time.
Cooling fan:
A cooling fan is built into this unit for better heat radiation. Do not
Preparation for Use
cover the opening in this section with any obstacles to avoid damage to the unit.
! Demonstration mode
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
To cancel the demonstration
mode:
When the unit is in the power standby mode (demonstration mode),
press the X-BASS/DEMO button.
The unit will enter the low power
consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
Note:
When the power is on, the X-BASS/DEMO button can be used to select the extra bass mode.
! To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
16
04/3/19XL-D V50H(A).fm
TINSEA027SJZZ
Remote control
! Battery installation
1 Remove the battery cover.
2 Insert the supplied batteries according to the direction indi-
cated in the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
3 Replace the cover.
Precautions for battery use:
Replace all old batteries with new ones at the same time.
"
Do not mix old and new batteries.
"
Remove the batteries if the unit is not to be used for long periods
"
of time. This will prevent potential damage due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
"
Installing the batteries incorrectly may cause the unit to malfunc-
"
tion.
Notes concerning use:
Replace the batteries if the operating distance is reduced or if the
"
operation becomes erratic. Purchase 2 "AA" size batteries (UM/
SUM-3, R6 , HP-7 or similar).
Periodically clean the transmitter on the remote control and the
"
sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may interfere with
"
operation. Change the lighting or the direction of the unit if this
occurs.
Keep the remote control away from moisture, heat, shock, and
"
vibrations.
! Test of the remote control
Check the remote control after checking all the connections (see
pages 12 - 16).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy music.
Remote sensor
0.2 m - 6 m
(8" - 20')
XL-DV50H
Preparation for Use
1
2
3
4
5
6
7
8
9
04/3/19XL-D V50H(A).fm
10
17
TINSEA027SJZZ
XL-DV50H
General control
! Volume control
Main unit operation:
When the VOLUME control is turned
clockwise, the volume will increase.
Preparation for Use
When it is turned anti-clockwise, the
volume will decrease.
Remote control operation:
Press the VOLUME (+ or -) button to increase or decrease the volume.
! Subwoofer volume control
Press the SHIFT button on the remote control, and adjust the volume.
.....
.....
30 (MAXIMUM
290
30 (MAXIMUM
290
! Bass control (X-BASS)
When the power is first turned on,
the unit will enter the extra bass
mode which emphasises the bass
frequencies, and "X-BASS" will appear. To cancel the extra bass
mode, press the X-BASS/DEMO (XBASS) button.
! Equaliser
When the EQUALIZER (EQ-MODE) button is pressed, the current
mode setting will be displayed. To change to a different mode, press
the EQUALIZER (EQ-MODE) button repeatedly until the desired
sound mode appears.
FLAT
ROCK
CLASSIC
POPS
VOCAL
)
JAZZ
The sound is not modified.
Bass and treble are emphasised.
Treble is cut a little.
Bass and treble are slightly emphasised.
Vocals (midrange tones) are emphasised.
Treble is slightly emphasised.
! Surround
To enter the surround mode, press
the SHIFT button and SUB TITLE/
SURROUND button on the remote
control. Repeat this operation to exit.
Note:
When the input source is "TUNER" or "AUX", the surround mode is
)
not available.
18
04/3/19XL-D V50H(A).fm
TINSEA027SJZZ
Loading...
+ 42 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.