Sharp TINSZA625AWZZ, CD-SW440N User Manual

ENGLISH

MODEL

CD-SW440N

MINI COMPONENT SYSTEM

OPERATION MANUAL

CD-SW440N Mini Component System consisting of CD-SW440N (main unit), CP-S440N (speaker system) and
CP-SW440N (subwoofer).

M

E
ST
Y

ENTS

PON

MINICOM

40
4

-SW
CD

N
IO
T

FUNC

R

POWE

D-BY

N
/STA
N
O

CD
B
US

UDIOIN

E
AP
T

A

HO
P

USH
P

N
E

OP

S
NE

ENERGY STAR® Program Information

Products that have earned
the ENERGY STAR
designed to protect the
environment through
superior energy efficiency.

®

are

ENERGY STAR® is a U.S. registered mark.

iPod is a trademark of Apple Inc.,
registered in the U.S. and other countries.

Accessories

Please confirm that only the following accessories are included.

D

B

C

S

U

E
P
TA

Remote control x 1
RRMCGA205AWSA

AM loop antenna x 1

QANTLA004AWZZ

FM antenna x 1
92LFANT1535A

Special Note

Supply of this product does not convey a license nor imply any right to distribute content created with this product in
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue­generating streaming applications (via Internet, intranets and/or other networks), other revenue-generating content
distribution systems (pay-aud io or audio-on-dema nd applications a nd the lik e) or on revenue-generating physical media
(compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent
license for such use is required. For details, please visit http://mp3licensing.com

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

“Made for iPo d” means t hat an electr onic accesso ry has
been designed to connect specifically to iPod and has
been certified by the developer to meet Apple
performance standards.

TINSZA625AWZZ

Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards.

Printed in Malaysia
10B R MW

1

For U.S. customer only

CONSUMER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
"Product"), when ship in its original container, will be free from defective workmanship and materials, and agrees that it will,

at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent
at no charge to the purchaser for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below
nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or
other misuse, abnormal service or handling, or which has been altered or modified in design or construction.

In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide
proof of purchase to the servicer.

The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law.
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE
LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow
limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.

The warranties described herein shall be the sole a
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused
by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any
way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion
of incidental or consequential damages, so the above exclusion may not apply to you.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE.

nd exclusive warr

Model Specific Section
Your Product Model Number & Description:

Warranty Period for this Product:
Additional Item(s) Excluded from Warranty Coverage

(if any):
Where to Obtain Service:

What to do to Obtain Service:

anties granted by Sharp and shall be the sole and

CD-SW440N Mini Component System

(Be sure to have this information available when you need
service for your Product.)

One (1) year parts and labor from the date of purchase.
Non-functional accessories, supplies, and consumable

items.
At a Sharp Authorized Servicer located in the United States.

To find a location of the neares
call Sharp toll free at 1-800-BE-SHARP.

Ship prepaid or carry in your Product to a Sharp Authorized
Servicer. Be sure to have Proof of Purchase available. If
you ship the Product, be sure it is insured and packaged
securely.

t S

harp Authorized Servicer,

TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07495-1163

System connections

Precautions

●

Please ensure that the equipment is positio ned in a well ventilat ed are a
and ensure that there is at least 4" (10 cm) of free space along the sides,
top and back of the equipment.

●

Do not place subwoofer system on the same surface as main unit to
prevent sound interruption during playback.

Connect the speaker light-up wires to the SPEAKERS LI GHT-UP sockets for
speaker illumination. To turn off the speaker light-up feature, press the
CLEAR/DIMMER button on the remote control for 2 seconds or more.

4" (10 cm)

AUDIO IN

PHONES

4" (10 cm)

MINI COMPONENT SYSTEM

CD-SW440

FUNCTION

VOL

PUSH
OPEN

4" (10 cm)

TableFloor

Speaker light-up connection

4" (10 cm)

Speaker connection

●

Connect the black wire to the minus (–) terminal, and
the red wire to the plus (+) terminal.

●

Do not make a mistake when connec ting the right and
left speakers. The right speaker is the one on the right
side when you face the unit.

●

Do not let the bare speaker wires touch each
other.

●

Do not allow any objects to fall into or to be placed in the bass reflex ducts.

●

Do not stand or sit on the speakers. You may be injure d.

●

Never mistake the FRONT SPEAKERS and the SUBWOOFER terminals.
The unit or the speakers may be damaged.

●

If you use other speakers with an impedance lower than that specified, the
unit may be damaged.
Front speakers: 4 ohms, Subwoofer: 8 ohms.

E-1

Incorrect

System connections (continued)

Make sure to unplug the AC power cord before making any connections.

TV

AM loop antenna

Installing the AM loop

antenna

< Assembling >

< Attaching to
the wall >

wall

screws

(not supplied)

FM antenna

Right speaker light-

Cooling fan :

The main unit is built with a cooling fan at the rear of th e unit for improved cooling. Please do not cover the opening of the
fan with any obstacles, as this will block proper ventilation.

up wire

Right speaker

AC outlet (AC 120 V ~ 60 Hz)

Cooling fan

To video

input jack

Left
speaker
light-up
wire

Left
speaker

Red
Black

Video cable
(not supplied)

subwoofer light-up wire
subwoofer

Remote control

Battery installation

Use 2 “AAA” size batteries (UM/ SU M-4, R3, HP-16 or
similar). Batteries are not included.

Open the battery cover.

1

Insert the batteries according to the direction indicated

2

in the battery compartment.
When inserting or removing the batteries, push them

toward the (–) battery terminals.
Close the cover.

3

Caution:

● Replace all old batteries with new ones at the same
time.

● Do not mix old and new batteries.

● Remove the batteries if the unit will not be used for a

long period of time. This will prevent potential damage
due to battery leakage.

● Do not use rechargeable batteries (nickel-cadmium
battery, etc.).

● Installing the batteries incorrectly may cause the unit to
malfunction.

● Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fire o r
the like.

Notes concerning use:

● Replace the batteries if the operating distance is
reduced or if the operation becomes erratic. Purchase
2 “AAA” size batteries (UM/SUM-4, R3, HP-16 or
similar).

● Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.

● Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit if this occurs.

● Keep the remote control away from moisture, heat,
shock and vibrations.

E-2

General control

MINI COMPONENT SYSTEM

CD-SW440

POWER

ON/STAND-BY

ON/STAND-BY

To turn the power on

The first time the unit is plugged in, the unit will enter the
demonstration mode. You will see words scroll and the
subwoofer and front speak e r will ligh t up in fla shi ng mode .

1 Press the DEMO button to cancel the demonstration

mode. The subwoofer and front speaker light up will be
off.

2 Press the ON/STAND-BY button to turn the power on.

Function Main unit Remote

Power on /
off

Demo on /
off

POWER

ON/STAND-BY

____

Display brightness control

To dim the display brightness, hold down the CLEAR/
DIMMER button on the remote control for 2 seconds or
more.

Volume auto fade-in

If you turn off and on the main unit with the volume set to
27 or higher, the volume starts at 16 and f ades in to the last
set level.

Subwoofer and front speaker light up
control

The subwoofer and front speaker will light up according to
the level of the music source play ed back. To turn on/off the
light, hold down the CLEAR/DIMMER but ton on the remote
control for 2 seconds or more.

FUNCTION

POWER

VOL

CD
USB

control

Operation

Press to turn the
power on or to
go to stand-by
mode.

Press to enter to
demonstration
on or off mode.

Volume control

Tur n the volume knob toward VOL +/– (on main unit) or
press VOLUME +/– (on remote control) to increase or
decrease the volume.

X-Bass control

When the power is first turned on, the unit will enter the
extra bass mode which emphasizes the bass frequencies,
and “X-BASS” will appear. To cancel the extra bass mode,
press the X-BASS button on the remote control.

Bass control

1 Press the BASS/TREBLE button to select “BASS”.
2 Within 5 seconds, press the VOLUME (+ or –) butt on to

adjust the bass.

Treble control

1 Press the BASS/TREBLE button to select “TREBLE”.
2 Within 5 seconds, press the VOLUME (+ or –) butt on to

adjust the treble.

Equalizer

When the EQUALIZER MODE button is pressed, the
current mode setting will be displayed. To change to a
different mode, press the EQUALIZER MODE button
repeatedly until the desired sound mode appears.

No equalization.

FLAT
GAME
CLASSIC
POPS

VOCAL

JAZZ

No equalization.
For game.

For rock music.

For classical music.

For classical music.

For pop music.

For pop music.

Vocals are enhanced.

Vocals are enhanced.

For jazz.

For jazz.

Auto power on function

When you press any of these buttons during stand-by
mode, the unit turns on.

● / button on the main unit : The unit turns on and
playback of the last function will start (iPod, CD,
TUNER, USB, TAPE, AUDIO IN).

● iPod button on the remote control : The unit turns on
and iPod function is activated.

● CD button on the remote control : The unit turns on and
CD function is activated.

● TUNER button on the remote control : The unit turns on
and TUNER function is activated.

● USB button on the remote control : The unit turns on
and USB function is activated.

● TAPE button on the remote control: The unit turns on
and TAPE function is activated.

● AUDIO IN button on the remote control : The unit turns
on and AUDIO IN function is activated.

Auto power off function

In the stop mode of disc, USB or tape oper ation , the main
unit enters the stand-by mode after 15 minutes of inactivity.

E-3

Listening to the iPod

Supported iPod models:

●

iPod nano (software 1.2 above)

●

iPod mini (software 1.2 above)

●

iPod (5th generation) (software 1.3 above) (D ock connecto r equipped
Click Wheel model)

●

iPod (4th generation) (software 3.0.2 above) (Dock connector
equipped Click Wheel model)

●

iPod nano (2nd generation) (software 1.0.0 above)

●

iPod nano (3rd generation) (software 1.0.3 above)

●

iPod nano (4th generation) (software 1.0.3 above)

●

iPod classic (software 1.0.3 above)

●

iPod touch (software 1.1 above)

●

iPod touch (2nd generation) (software 2.1 above)

Caution:

Please update your iPod unit to the latest software version from Apple’s
homepage before using it.

iPod adaptor connection

Notes:

●

iPhone is not supported by this system.

●

You can use an audio cable to connect your iPod to the AUDIO IN
jack if:

1.

your iPod adaptor does not fit into the iPod dock on the main unit.

2.

you have an iPod that does not have an iPod adaptor.

3.

you have an iPod that does not have an iPod 30 pin connector.

To insert iPod adaptor

1

Press the ON/STAND-BY button to turn the power on.

2

Insert the iPod adaptor into the iPod dock and connect your iPod.

iPod (bottom)

iPod

MINI COMPONENT SYSTEM

CD-SW440

POWER

ON/STAND-BY

POWER

ON/STAND-BY

CD
USB

FUNCTION

VOL

TAPE

To remove iPod adaptor

Insert the tip of a screwdriver (“–” type, small) in to the iPod adaptor hole
as shown and lift upward to remove.

Dock connector

iPod adaptor
(not supplied)

iPod dock

iPod connector

iPod playback

1

Press the ON/STAND-BY button to turn the power on.

2

Press the iPod button on the remote control or FUNCTION button
repeatedly on the main unit to select iPod function.

3

Insert iPod unit in iPod dock of main unit.

4

Press the / button to start playback.

Notes:

●

Once the iPod is connected to the unit it will begin charging.

●

The iPod unit cannot be charged while the main unit is in the stand­by mode or during USB mode.

●

Please make sure to set iPod unit to either NTSC or PAL to match
your TV signal. Please visit Apple’s homepage for further informatio n.

To disconnect iPod

Simply remove the iPod from the iPod dock. It is saf e to do so e v en during
playback.

Navigating the iPod menus

1

Press the MENU button to view the menu on iPod unit. Press it
again to go back to previous menu.

2

Use the TUNING ( or ) button on the remote control to select
an item on the menu and then press ENTER button.

Note:

When navigating the iPod menus with remote control, do not operate a n y
of the buttons on the iPod unit. The volume level is adjusted by pressing
the VOL (+ or –) button on the main unit or the remote control. Adjusting
the volume on the iPod unit gives no effect.

iPod operation:

The operations described below depend on the generation iPod you are
using.

System on operation:

When the main unit is powered on, the iPod unit will automatically power
on when docked in the unit (including TIMER function/exclude USB
function).

System off (stand-by operation):

When the main unit is turned to stand-by mode, the docked iPod unit will
automatically turn to stand-by mode.

E-4