Date: Jun. 1, 1993
COPIER : SF-9800
No. : SP-1397
IRREGULAR NOISE CAUSED BY THE DV GEAR
ONE-WAY CLUTCH DAMAGE
1.General: Wear in the 12T DV gear boss contaminates the one-way clutch of the DV gear which
locks and causes to damage the boss of the DV frame 80R. To prevent this, the surface
treatment of the DV frame 80R boss is changed from manganese phosphate to
electroless nickel plating.
2.Phenomenon: Irregular noise generation from within the DV unit.
3.Action: (Factory action)
• The DV frame 80R boss is surface finished with a new method as beginning from
October, 1991.
• The same applies to the color DV unit boss as beginning from October, 1991.
4.Note: (Identification of the new boss from the old boss)
DV gear (12T)
DV frame 80R
DV idle boss A
(With the new surface treatment)
DV idle boss B
(With the new surface treatment)
The color of the boss changed
from black to siver.
With this change in the suface treatment, a new parts code is issued for the DV unit.
SHARP CORPORATION Reprography Division
1/2
Green
C
Ref.
No.
Model
name
SF-9800
9750,9700
9550,9560
SF-9800
9560
SF-9750
9700
Version P/G No.
7 -52
All
7 -901
7 -901
Current parts New parts
Parts code Parts code
Price
Parts name
rank
CFRM-0338FC01 CFRM-0338FC02 AV DV frame, 80R ’91/10 3
CCHSM0007FC69 CCHSM0007FC80 CE DV unit (black) ’91/10 3
CCHSM0007FC64 CCHSM0007FC80 CE DV unit (black) ’91/10 3
Effective
time
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. C urr e nt t y pe c a n be u s ed i n place of n ew t y pe .
New ty pe cann ot be us ed in place of curr ent type .
3. C urr e nt type ca nn ot be us e d in p lac e o f new ty p e.
New t y pe c a n be u s ed i n pl a ce of curr en t ty p e.
Parts m ar ke d wi th “ ” is imp or t an t fo r m ai n ta ini ng t he s a fe ty of the set. B e s ure t o r ep lac e t he s e pa rts wi th
!
5. Interc ha ng ea ble i f r ep l ace d wi th s a m e typ es of
relate d pa r ts in use.
6. Others.
specified ones for maintaining the safety and performance of the set.
Inter-
change-
ability
Note
2/2