(Battery is built into handset.)
・AC Charger (SHCEJ1)
・クイックスタート (Japanese)
・お願いとご注意 (Japanese) with English "Quick Tips"
・Warranties (Japanese) for handset and AC Charger
Parts & Functions
Handset Parts
NameDescription
Earpiece
Proximity/
Light Sensor
Notification
Lamp
Internal
Camera
Charging
Terminals
Strap
Eyelet
Headphone
Port
Display
Hear other party's voice through this.
Detects ambient light level and prevents
Touchscreen misoperation during call.
Illuminates while charging or for
notifications (missed calls, new messages,
etc.).
Shoot photos or videos.
For use with Desktop Holder.
Attach Straps here.
Connect Headphones with Mic (optional
accessories) here.
Touch Display to select menu items, open
functions, scroll pages, etc.
NameDescription
External
Camera
Infrared
Port
Mobile
Light
Mic
External
Device Port
Speaker
FeliCa Logo
Battery
Cover
Shoot photos or videos.
Transfer files using Infrared.
Use as a flashlight or camera flash.
Talk to other party through this.
Connect AC Charger or Micro USB Cable
here.
Listen to music, video/One Seg audio, etc.
through this.
Place over reader/writer to use OsaifuKeitai®.
Access USIM Card and SD Card.
Handset Keys
NameDescription
Activate/cancel Screen lock. Long Press
(Power Key)
(Volume Down
Key)
(Volume Up
Key)
(Quick
Start Key)
1 Change assigned function as needed.
for power on/off or phone options.
Decrease Volume. In Welcome sheet (lock
screen) or 3-Line Home, Touch & Hold to
activate/cancel Manner mode.
Increase Volume. In Welcome sheet (lock
screen), Touch & Hold to turn on Mobile
Light (Tap to turn it off).
Open Another View1. Cancel Screen lock.
In Welcome sheet (lock screen), turn off
Display. Long Press to activate Personal
Collect Board1.
7
Getting Started
SoftBank 203SH
8
Battery Cover Installation
Removing Battery Cover
Always power off beforehand. If handset is hot, wait until it
cools down after powering off.
・Use notch (○) to lift Battery Cover. Push up Battery Cover
along edges to remove it.
Installing Battery Cover
Always confirm Card Slot Cover (○ in of "Inserting USIM
Card") is firmly closed beforehand.
Protective Sheet Cautions
Under Protective Sheet
There are Battery and precision parts under Protective
Sheet. Do not peel, damage or subject it to impact; may
cause malfunction, overheating, ignition, electric shock,
impairment, burn injuries, etc.
Heat Caution
Protective Sheet () may be hot to the touch while
power is on or immediately after powering off, leading to
burn injuries.
・Align at Power Key side, then firmly press down along edges.
Do not apply excessive force to Battery Cover; damage may
result.
Battery Cover
General
Use handset with Battery Cover installed.
Replacement
If Battery Cover is damaged, replace it with a new one.
USIM Card Installation
9
USIM Card is an IC card containing customer and
authentication information, including handset number.
Inserting USIM Card
Always power off beforehand. If handset is hot, wait until it
cools down after powering off. Do not touch Protective Sheet
while handset is hot; may cause burn injuries.
Remove Battery Cover
・Use notch (○) to lift Battery Cover. Push up Battery Cover
along edges to remove it.
Replace Battery Cover
Getting Started
・Align at Power Key side, then firmly press down along edges.
Do not apply excessive force to Battery Cover; damage may
result.
Open Card Slot Cover
Insert USIM Card into USIM Card Slot
・Confirm orientation of USIM Card (see the notch), then
insert it all the way with metal contacts facing up. (Refer
to the label indicating the orientation in which USIM Card
should be inserted.)
Close Card Slot Cover
・Close Card Slot Cover firmly. Debris trapped between gasket
and base may expose handset to liquid/dust.
SoftBank 203SH
10
Removing USIM Card
Always power off beforehand. If handset is hot, wait until it
cools down after powering off. Do not touch Protective Sheet
while handset is hot; may cause burn injuries.
Remove Battery Cover
・Use notch (○) to lift Battery Cover. Push up Battery Cover
along edges to remove it.
Open Card Slot Cover
Handset Memory & SD Card
Handset supports SD Card up to 64 GB. Some SD Cards may
not operate properly.
In addition to SD Cards, use handset memory as storage for
shot photos/videos and other files.
Storage
Handset internal storage consists of system memory and
handset memory. See below to learn about system memory,
handset memory and SD Card.
StorageDescription
System
memory
Handset
memory
SD Card
System files and applications are installed
here.
Shot photos/videos, mail attachments,
etc. are saved here. Connect handset to a
PC to exchange files.
Connect handset (with SD Card inserted)
to a PC to exchange files. Save images,
music and other files to SD Card for use
on handset.
Remove USIM Card
・Gently push in USIM Card and release; it pops out. Carefully
remove USIM Card without bending it.
Close Card Slot Cover
・Close Card Slot Cover firmly. Debris trapped between gasket
and base may expose handset to liquid/dust.
Replace Battery Cover
・Align at Power Key side, then firmly press down along edges.
Do not apply excessive force to Battery Cover; damage may
result.
11
Inserting SD Card
Always power off beforehand. If handset is hot, wait until it
cools down after powering off. Do not touch Protective Sheet
while handset is hot; may cause burn injuries.
Remove Battery Cover
・Use notch (○) to lift Battery Cover. Push up Battery Cover
along edges to remove it.
Open Card Slot Cover
Formatting SD Card
When using a new SD Card for the first time, format it on
handset before trying to save images, music, etc.
・Formatting deletes all SD Card files.
・Charge handset while formatting or charge it adequately
beforehand.
In application sheet,(Settings)
microSD & phone storage
Getting Started
Insert SD Card into SD Card Slot
・Insert SD Card all the way with terminals facing down.
(Refer to the label indicating the orientation in which SD
Card should be inserted.)
Close Card Slot Cover
・Close Card Slot Cover firmly. Debris trapped between gasket
and base may expose handset to liquid/dust.
Replace Battery Cover
Erase microSD
Erase SD card
・Align at Power Key side, then firmly press down along edges.
Do not apply excessive force to Battery Cover; damage may
result.
SoftBank 203SH
12
Unmounting SD Card
Enter Operation PasswordOK
・If Operation Password is unset, follow onscreen prompts.
Erase everything
Handset erases all SD Card files.
・When finished, SD Card is mounted.
Always unmount SD Card before removing it.
In application sheet,(Settings)
microSD & phone storage
Unmount microSDOK
Unmount microSD changes to Mount microSD . (SD Card
is unmounted.)
13
Removing SD Card
Always power off beforehand. If handset is hot, wait until it
cools down after powering off. Do not touch Protective Sheet
while handset is hot; may cause burn injuries.
Remove Battery Cover
・Use notch (○) to lift Battery Cover. Push up Battery Cover
along edges to remove it.
Open Card Slot Cover
Formatting Handset Memory
Formatting deletes all handset memory files.
・Charge handset while formatting or charge it adequately
beforehand.
In application sheet,(Settings)
microSD & phone storage
Getting Started
Remove SD Card
・Gently push in SD Card and release; it pops out. Carefully
remove SD Card without bending it.
Close Card Slot Cover
・Close Card Slot Cover firmly. Debris trapped between gasket
and base may expose handset to liquid/dust.
Replace Battery Cover
Erase phone storage
Erase internal storage
・Align at Power Key side, then firmly press down along edges.
Do not apply excessive force to Battery Cover; damage may
result.
SoftBank 203SH
14
Handset Memory & SD Card Usage Notes
Enter Operation PasswordOK
・If Operation Password is unset, follow onscreen prompts.
Erase everything
Handset erases all handset memory files.
General
Handset memory files and SD Card files may be lost/altered
accidentally. Keep a copy of important information in a
separate place. SoftBank Mobile Corp. is not liable for
any damages resulting from accidental loss/alteration of
information.
・Never power off while files are being accessed.
microSDXC Card
Handset supports microSDXC Cards (SDXC-compatible SD
Cards). microSDXC Cards are supported by SDXC-compatible
devices only.
Exchanging Files with Non-SDXC-Compatible
Devices
To exchange files between handset and non-SDXCcompatible devices, use SD Cards (microSD/microSDHC
Cards) supported by handset and those devices. Inserting a
microSDXC Card used on handset in a non-SDXC-compatible
device may corrupt card files. In such cases, do not format
the microSDXC Card on that device even if prompted to do
so.
・Formatting deletes all microSDXC Card files and changes
the file system. The original memory capacity may
be unavailable after formatting. To use a corrupted
microSDXC Card, format it on an SDXC-compatible device.
Handling SD Cards Used on Other Mobiles
After installing SD Card used on other mobiles (such as
previously used handsets) into handset, the notification
Application data is present in the microSD. may appear on
Status Bar. To use files on such SD Cards on handset, copy
files to handset memory as follows.
Drag Status Bar down for Notifications Window
Application data is present in the microSD.Follow
onscreen prompts
・If the same folder/file name exists in handset memory,
overwrite confirmation appears. Handset memory files
cannot be restored once overwritten.
Handset Memory
Photos and videos shot on handset are saved to handset
memory by default. Depending on downloaded application
(sold separately), corresponding files may be saved to
handset memory even if SD Card is specified as their save
location in application description.
SD Card Caution
Keep SD Card out of infants' reach; may cause choking if
swallowed.
Charging Handset
15
Battery is built into handset.
AC Charger, Desktop Holder (optional accessory), Micro USB
Cable (optional accessory), Micro USB Charging Adapter
(optional accessory) and In-Car Charger (optional accessory)
are not water or dust proof. Do not charge handset while it is
wet.
AC Charger
Use AC Charger (SHCEJ1).
Open External Device Port Cover (hereafter "Port Cover")
・Use notch to slightly lift Port Cover, then gently pull it
open being careful not to dislodge it.
Close Port Cover
Getting Started
・Close Port Cover firmly. Debris trapped between gasket and
base may expose handset to liquid/dust.
Insert Micro USB plug of AC Charger into External Device Port
・Insert Micro USB plug in correct orientation; otherwise,
External Device Port may be damaged. Confirm contours and
orientation of Micro USB plug, then insert it with tabs (○)
facing down.
Plug AC Charger into AC outlet after rotating blades out as
shown
Notification Lamp illuminates while charging, and goes out
when charge is full.
Unplug AC Charger and retract blades
Remove Micro USB plug from External Device Port
SoftBank 203SH
16
Desktop Holder
Use AC Charger (SHCEJ1) with Desktop Holder (SHEEV1;
optional accessory).
Insert Micro USB plug of AC Charger into connector port of
Desktop Holder
・Insert Micro USB plug in correct orientation; otherwise,
connector port of Desktop Holder may be damaged. Confirm
contours and orientation of Micro USB plug, then insert it
with tabs (○) facing down.
Remove handset and then Micro USB plug from Desktop Holder,
then unplug AC Charger and retract blades
・To remove handset, tilt it toward you while holding Desktop
Holder.
USB Charging
Connect handset to a PC with Micro USB Cable (SHDDL1;
optional accessory).
・Power on handset and PC first.
・To use Fast transfer mode, install USB Cable driver on the
PC beforehand.
・Handset may not charge or charge slowly depending on PC
status/environment.
Open Port Cover
Plug AC Charger into AC outlet after rotating blades out as
shown
Place handset into Desktop Holder with Charging Terminals
facing down
Tilt back handset and secure it with lock lever
・Use notch to slightly lift Port Cover, then gently pull it
open being careful not to dislodge it.
Insert Micro USB plug of Micro USB Cable into External Device
Port
・Insert Micro USB plug in correct orientation; otherwise,
External Device Port may be damaged. Confirm contours and
orientation of Micro USB plug, then insert it with tabs (○)
facing down.
・Handset supports two types of Micro USB plug.
Insert Micro USB Cable into PC USB port
Notification Lamp illuminates while charging, and goes out
when charge is full.
Notification Lamp illuminates while charging, and goes out
when charge is full.
Remove Micro USB Cable from handset and PC, then close Port
Cover
17
Lithium-ion Battery
This product requires a lithium-ion battery. Lithiumion batteries are recyclable. To recycle a used lithiumion battery, take it to any shop displaying the recycling
symbol.
・To avoid fire or electric shock, do not short-circuit or
disassemble Battery.
Charging Precautions
Handling Cables
Do not pull, bend, or twist cable.
Handling Port Cover
Remember these points when closing Port Cover:
・Close Port Cover firmly. Debris trapped between gasket
and base may expose handset to liquid/dust.
・Do not try to close Port Cover with hinge extended; may
deform Port Cover and affect water/dust resistance.
Power On/Off
Power On
Getting Started
Long Pressuntil SoftBank logo appears
After Power On Graphics, Welcome sheet (lock screen)
Handset may power on automatically when connected to a
PC with Micro USB Cable; avoid connection aboard aircraft
or in hospitals, etc. where handset use is prohibited.
Battery Care
To help maintain performance and life of Internal Battery,
do not store in the following conditions.
・Full (immediately after charging is complete)
・Exhausted (too low to power on handset)
Periods of Disuse
Charge at least once every 6 months; if left uncharged,
handset may become unusable or files/settings may be
affected.
Bulges of Internal Battery
Depending on usage, bulges may appear near end of battery
life; this does not affect safety.
Internal Battery Replacement
Google & location window opens.
・Google & location window may open even when handset is
not used.
Set Google's location service options
Internal Battery is a consumable item; may need to be
replaced if operating time shortens noticeably. Internal
Battery is not user replaceable; its replacement incurs fees
and requires handset submission to a SoftBank Shop or
other appropriate servicer. For details, contact a SoftBank
Shop or SoftBank Customer Support, General Information.
Initial setup menu opens.
・
Scroll to bottom or Tapfor.
・If 3-Line Home usage guide appears, follow onscreen
prompts.
SoftBank 203SH
18
Power Off
(Long Press)
Power off
Touchscreen Operations
Touch Display to select menu items, open functions, scroll
pages, etc.
Tap
Tap item or key to open or execute corresponding function/
operation.
Touch & Hold
OK
Handset shuts down.
Touch item for 1+ seconds (handset vibrates) to move icon,
open menu, etc.
Drag
Drag item to move it.
Flick
Flick to toggle sheets, pages, etc.
Pinch/Spread
Pinch or Spread to zoom in or out on images, maps, etc.
19
Getting Started
Calibrating Touchscreen
Calibrate Touchscreen to improve response. Hold handset
Touch Navigation Bar then Drag up for applications that
support the assist function. Drag to target application and
release finger to activate it quickly.
Exiting Applications
In any application, Taprepeatedly until 3-Line Home
returns. (Some applications may remain active.)
25
Using Application Use History
In application sheet,
Application usage history (a list of recently used
applications) appears.
・
appears before names of active applications.
Tap application
Handset Phone Number
My Phone Number
In application sheet,(Settings)Profile
Basic Operations
Profile opens.
・Handset number appears in Own phone number field.
Application activates.
・Flick active application left/right to exit it.
Obtaining Applications
Obtain applications from(Play Store).
Deleting Application Usage History
All Items
In application usage history,
Single Item
In application usage history, Flick item left/right
SoftBank 203SH
26
Saving User Information to Profile
In application sheet,(Settings)Profile
Profile opens.
(edit) on Action Bar
Mobile Manners
Manner Mode
Mute ringtones and other handset sounds to avoid disturbing
others around you.
・Camera shutter, video recording tones, etc. still sound even
in Manner mode.
In Welcome sheet (lock screen) or 3-Line Home, Touch & Hold
Manner mode activates.
・
To cancel, Touch & Holdin Welcome sheet (lock screen)
or 3-Line Home.
Airplane Mode
Leaving power on, suspend signal-transmitting functions.
Profile entry window opens.
Tap item (entry field)
・
Tapto show/add entry field orto delete.
Complete field
・Tap other items and complete fields as needed.
SaveYes
Profile is saved.
(Long Press)
Phone options appear.
Airplane mode
Airplane mode activates.
・
To cancel, Long Press, then Tap Airplane mode .
Selecting Manner Mode Option
(Long Press)Tap icon (such as)
Airplane Mode Precautions
Activating Airplane mode disables Wi-Fi and Bluetooth®,
interrupting corresponding transmissions.
Wi-Fi/Bluetooth® connections can be used even in Airplane
mode by enabling Wi-Fi/Bluetooth® after activating
Airplane mode ; make sure that such connection/
transmission is allowed in your current location before use.
27
Text Entry
Keyboards
Use onscreen keyboards for text entry. In 12-key Keyboard,
multiple characters are assigned to each key. In QWERTY
Keyboard, a single letter is assigned to each key.
・Tap a text entry field for keyboards.
・Text entry descriptions are for iWnn IME - SH edition.
Before reading on, switch input method from Android
keyboard (selected when interface language is set to
English) to iWnn IME - SH edition as follows.
In a text entry window, Drag Status Bar downChoose
input methodJapanese
Switching Keyboards
In a text entry window,Change input UI
12-Key Keyboard Layout
Basic Operations
Enter characters.
Undo conversion; reverse-toggle character options
before confirming entry.
Backspace cursor.
Enter pictograms, symbols, or emoticons; switch
conversion options.
Toggle entry modes.
Enter space; toggle case; add ゛ or ゜ for hiragana.
Current entry mode
Delete characters.
Advance cursor; add space at text end.
Open text entry options; enter space; convert hiragana.
Insert line break; confirm current characters.
・When How to Change Input UI window opens after
Tapping, Tap CLOSE . To disable it thereafter, select
Don't show again beforehand.
Set QWERTY keyboard or Set 12 keyboard
Keyboard is switched.
QWERTY Keyboard Layout
Enter characters.
Toggle case.
Toggle entry modes.
Enter pictograms, symbols, or emoticons.
Undo conversion.
Open text entry options.
Current entry mode
Delete characters.
Insert line break; confirm current characters.
Advance cursor; add space at text end.
Backspace cursor.
Enter space; convert hiragana.
SoftBank 203SH
28
Switching Entry Modes
Tapto toggle Half Numeric, Kanji, and Half Alphabet
modes. Alternatively, Flickleft/right to toggle these
modes. To use other entry modes:
In a text entry window,Change input mode
Tap mode
Alphabet
In 12-key Keyboard, to enter Keitai in Half Alphabet:
Confirm Half Alphabet mode is selected (on Status Bar)
(twice: K)(twice: e)(three times: i)
(once: t)(once: a)(three times: i)
Keyboard interface changes accordingly. Current entry mode