QW-GT45F444I-DE
QW-GT45F444W-DE
CONTENTS
CHAPTER-1: EXPLANATION OF PRODUCT
Technical specications 5
Conformity with the standards and test data 5
CHAPTER-2: SAFETY INFORMATION AND RECOMMENDATIONS
Recycling 6
Safety information 6
R e c o m m e n d a t i o n s 8
Items not suitable for dishwashing 8
CHAPTER-3: INSTALLING THE MACHINE
Positioning the machine 8
Water connections 9
Water inlet hose 9
Water outlet hose 9
Electrical connection 10
Fitting the machine undercounter 11
CHAPTER-4: PREPARING THE MACHINE FOR USE
Prior to using the machine 13
The importance of water decalcication 13
Filling with salt 13
Testing strip 13
Adjusting salt consumption 14
Detergent usage 14
Filling the detergent compartment 15
Combined detergent 15
CHAPTER-5: LOADING YOUR DISHWASHER
Filling with rinse aid and making the setting 15
Dish rack 16
Alternative basket loads 18
CHAPTER -6: PROGRAMME DESCRIPTIONS
Programme items 19
CHAPTER -7: SWITCHING ON THE MACHINE AND SELECTING A PROGRAMME
Selection of programme and Starting of the Machine 21
Programme Selection of programme and Starting of the Machine 23
Programme follow-up 24
In order to add additional functions to the programme; 26
Changing a programme 26
Cancelling the Program 26
CHAPTER-8: MAINTENANCE AND CLEANING
Filters 30
Spray arms 30
Hose lter 30
CHAPTER-9: FAILURE CODES AND WHAT TO DO İN CASE OF FAILURE 31
CHAPTER-10: PRACTICAL AND USEFUL INFORMATION 32
Dear Customer,our goal is to offer you, high quality products that exceed your expectations. Your appliance is
produced in modern facilities and is carefully tested for quality. Before using your appliance, carefully read this
guide which includes basic information for safe installation, maintenance and use. The operating instructions
apply to several models. Differences may therefore occur.
EN-3
CHAPTER -1: EXPLANATION OF PRODUCT
1. Worktop
2. Upper basket with racks
3. Upper spray arm
4. Lower basket
5. Lower spray arm
6. Filters
7. Rating plate
8. Control Panel
9. Detergent and rinse-aid dispenser
10. Salt dispenser
11. Upper basket track latch
12. Upper Cutlery Basket
13
Turbo Drying Unit:
This system provides better drying
performance for your dishes.
EN-4
14
Ceiling Spray Arm:
It provides better washing for
the dishes at upper basket.
CHAPTER -1: TECHNICAL SPECIFICATIONS
Technical specifications
Capacity 14 place settings
Height 850 mm
Height (without worktop) 820 mm
Width 598 mm
Depth 598 mm
Net Weight 62 kg
Electricity input 220-240 V, 50 Hz
Total Power 1900 W
Heating Power 1800 W
Pump Power 100 W
Drain Pump Power 30 W
Water supply pressure 0.03 MPa (0,3 bar)-1 MPa (10 bar)
Current 10 A
Conformity with the standards and Test data / EU Declaration
of Conformity
This product meets the requirements of all applicable EU directives with the corresponding harmonised standards, which provide for CE marking.
Please visit www.sharphomeappliances.com for an electronic copy of this user
manual.
EN-5
CHAPTER -2: SAFETY INFORMATION AND RECOMMENDATIONS
Recycling
• The recyclable materials are used in certain components and packaging.
• Plastic parts are marked with international abbreviations: (>PE< , >PS< ,
>POM<, >PP<, )
• Cardboard parts have been produced from recycled paper which should be
disposed of into waste paper collection containers for recycling.
• Such materials are not suitable for garbage bins. They should be delivered to
recycling centres instead.
• Contact relevant centres in order to obtain information on methods and points
of disposal.
Safety Information
When you take delivery of your machine
• If you see any damage on your machines’ packaging, please notify your
retailer.
• Unwrap the packaging materials as indicated and dispose of them in
accordance with the rules.
The points to pay attention to during installation
• Choose a suitable, safe and level place to install your machine.
• Carry out the installation and connection of your machine by following the
instructions.
• We recommend that the machine is installed by an authorised installer, and
should only be serviced by an approved technician.
• Only original spare parts should be used with the machine.
• Before installing, be sure that the machine is unplugged.
• Check whether the indoor electrical fuse system is connected according to
the regulations.
• All electrical connections must match values on the rating plate.
• Be sure that the machine does not stand on the electricity supply cable.
• Never use an extension cord or a multiple socket for making a connection.
The plug should be easily accessible after installation.
• After installation, run it unloaded for the first time.
In daily use
• This machine is for household use; do not use it for any other purpose.
Commercial usage of the dishwasher will void the guarantee.
• Do not use detergents and rinse aids that are not specifically designed for
dishwashers. Improper of such items may invalidate the warranty.
• Due to risk of explosion, do not put into the machine’s washing section any
chemical dissolving agents such as solvents.
• Check whether plastic items are heat-resistant before washing.
EN-6
CHAPTER -2: SAFETY INFORMATION AND RECOMMENDATIONS
•This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they are supervised or have been given instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children should not play with the appliance.Cleaning and user
maintenance shall not be made by children without supervision.
• Do not put unsuitable and heavy items above the basket capacity into your
machine. SHARP will not be responsible for any damage on the inner parts.
• The door should not be opened whilst the machine is operating. A safety
device will ensure that the machine stops if opened.
• To avoid accidents, do not leave the door open.
• Place knives and other sharp-ended objects in the cutlery basket in bladedown
position.
• If the supply cord is damaged, it must be replaced by SHARP, or its service
agent.
• If EnergySave option is selected as “Yes”, the door will be opened at the end
of the program. Do not force the door closed to avoid harming the auto door
mechanism for 1 minute. The door must be open for 30 minutes to dry effectively(
in models with auto door opening system ).
Warning: Do not stand in front of the door after the auto-open signal sounds.
For your children’s safety
• After removing the machines’ packaging, make sure that the packaging
material is out of reach of children.
• Do not allow children to play with or start the machine.
• Keep children away from detergents and rinse aid.
• Keep children away from the machine while it is open because there may still
be residues of cleaning substances inside the machine.
• Be sure that your old machine does not pose any threat to your children.
Children are known to have become locked in old machines. To prevent such
a situation, break your machines’ door lock and tear off the electrical cables.
In case of malfunction
• Any repair performed by anyone other than authorized service personnel
will invalidate your warranty.
• Prior to any repair work on the machine, be sure that the machine is isolated
from the mains. Switch off the fuse or unplug the machine.Do not pull by the
cable when unplugging. Make sure to turn off the water tap.
EN-7
CHAPTER -2: SAFETY INFORMATION AND RECOMMENDATIONS
Recommendations
• For energy and water saving, remove coarse residues on your dishes before
placing the dishes into the machine. Start your machine after having fully
loaded it.
• Use the pre-wash programme only when necessary.
• Place hollow items such as bowls, glasses and pots into the machine in such
a way that they will face down.
• You are not recommended to overload your machine or load it in a way other
than that which is indicated.
Items not suitable for dishwashing:
• Cigarette ash candle leftovers, polish, paint, chemical substances, ironalloy
materials.
• Forks, spoons and knives with wooden or bone, or ivory or nacre-coated
handles; glued items,items soiled with abrasive, acidic or base chemicals.
• Plastic items that are not heat-resistant, copper or tin-coated containers.
• Aluminium and silver objects (they may discolour, become dull).
• Certain delicate glass types, porcelain with ornamental printed patterns
as they fade even after the first wash; certain crystal items as they lose their
transparency over time, cutlery that is not heat-resistant, lead crystal
glasses, cutting boards, items manufactured with synthetic fibre.
• Absorbent items as sponges or kitchen rags are not suitable for dishwashing.
Warning:Take care to buy dishwasher-proof sets in your future purchases.
INSTALLING THE MACHINE
Positioning the machine
When determining the installation place, choose an accessible place for easy
loading and unloading of the dishes.
Do not put your machine in any location where there is the possibility of the
room temperature falling below 0°C.
Before positioning, take the machine out of its packaging by following the
warnings located on the package.
Position the machine close to a water tap or drain. You need to site your
machine, taking into consideration that its connections cannot be altered once
they are made.
Do not grip the machine by its door or panel in order to move it.
Take care to leave sufficient clearance from all sides of the machine for moving
it back and forth during cleaning.
Make sure that the water inlet and outlet hoses do not get squeezed while
positioning the machine. Also, make sure that the machine does not stand on
the electrical cable.
Adjust the machines’ adjustable feet so that it can stand level and balanced.
Proper positioning of the machine ensures problem-free opening and closing
of the door.
EN-8
CHAPTER -3: INSTALLING THE MACHINE
If the door of machine does not close properly, check if the machine is stable on
the floor if not, adjust the feet and ensure its stable position.
Water connection
Indoor plumbing must be suitable for installing a dishwasher. Also, we recommend
that you fit a filter at the entrance of your property so as to avoid any damage
to your machine because of contamination (sand, clay, rust etc.) that might be
occasionally carried in through the mains water supply or the indoor plumbing,
and to prevent such complaints as yellowing and formation of deposits after
washing.
Water inlet hose
Do not use the water inlet hose of your old machine.
Use the new one supplied with your machine instead. If
you connect a new or long - unused water inlet hose
to your machine ,run water through it for a while before
making the connection. Connect the water inlet hose
directly to the water inlet tap. The pressure supplied by
the tap should be at a minimum of 0.03 Mpa and and at
a maximum of 1 Mpa.If the water pressure is above 1
Mpa,a pressure-relief valve should be fitted inbetween.
After making connections, the tap should be turned on fully and checked for
water tightness. For safety purposes, we recommend that you turn off the water
inlet tap when the machine is not going to be used for an extended period of
time.
NOTE: An Aquastop water etc. spout is used in some
models. With Aquastop, a potentially dangerous
tension exists.Do not cut the Aquastop water spout.
Do not let it get folded or twisted.
Water outlet hose
The water drain hose can be connected either directly
to the water drain hole or to the sink outlet spigot.
Using a special bent pipe (if available), the water can
be drained directly into the sink via hooking the bent
pipe over the edge of the sink. This connection should
be between 50 and 110 cm from the floor plane.
EN-9
CHAPTER -3: INSTALLING THE MACHINE
Warning: When a drain hose longer than 4 m is used, the dishes might
remain dirty. In that case, SHARP will not accept responsibility.
Electrical connection
The earthed plug of your machine should be connected to an earthed outlet
supplied by suitable voltage and current. If there is no earthing installation,
have a competent electrician to carry it out. In case of usage without earthing
installed, our company will not be responsible for any loss of usage that might
occur. The indoor fuse current value should be 10-16 A. Your machine is set
according to 220-240 V. If the mains voltage in your location is 110 V, connect
a transformer of 110/220 V and 3000 W inbetween.
The machine should not be plugged in during positioning. Always use the
coated plug supplied with your machine. Running in low voltage will cause a
decline in washing quality. The machine’s electrical cable should be replaced
by an authorised service or an authorised electrician only. Failure to do so may
lead to accidents. For safety purposes, we recommend that you disconnect the
plug when the machine is not going to be used for an extended period of time.
In order avoid electric shocks, do not unplug when your hands are wet.
When disconnecting your machine from the mains supply, always pull from the
plug. Never pull the cord itself.
EN-10
CHAPTER -3: INSTALLING THE MACHINE
Fitting the machine undercounter
If you wish to fit your machine undercounter, check whether you have sufficient
space under your countertop and whether the wiring-plumbing is suitable to
do so.1 If you decide that the space under the countertop is suitable for fitting
your machine, remove the worktop as shown in the illustration. 2
Warning:The surface which you place the machine under when removing its
worktop has to be stable to avoid balance problems.
To remove the worktop, remove the screws that hold the worktop which are
located at the rear of the machine; then push the front panel 1 cm from the
front side towards the rear and lift it.
EN-11
Loading...