Sharp NA-953, NA-851, NA-901 User Manual

NA Series (1.05 m
95 W | 90 W | 85 W
Microamorphous silicon thin-film photovoltaic modules
Say yes to solar power!
Because it protects the climate.
2
, 600 V)
As a solar specialist with 50 years' experience in photovoltaics (PV), Sharp makes significant contri­butions to groundbreaking progress in solar technology.
The NA series of thin-film photovoltaic modules con­sists of an amorphous and a microcrystalline silicon layer. This microamorphous tandem structure not only absorbs visible light but also the invisible portion of the solar spec­trum. This makes especially efficient use of solar energy.
All Sharp NA series modules offer system integration which is optimal both techni­cally and economically, and are suitable for installations in on and off-grid PV s y s t e m s .
Product features
Tandem structure with an amorphous and a microcrystalline silicon layer offering a stabilised module efficiency of up to 9.0%.
The black appearance of the module creates a harmonious visual impression.
Higher energy yields per watt, at both high temperatures and with diffuse light.
Use of tempered white glass, EVA plastic, and weather protection film, as well as an anodised aluminium frame with drainage holes for long-term use.
Output: connection cable with waterproof plug connector.
Quality from Sharp
Benchmarks are set by the quality standards of Sharp Solar.
Con tinual checks guarantee a consistently high level of quality. Every module undergoes visual, mechanical, and electrical inspection. This is recognisable by means of the original Sharp label, the serial number, and the Sharp guarantee:
5 year product guarantee
10 year performance guarantee for a power output of 90%
25 year performance guarantee for a power output of 80%
Brief details for the installer
Tandem structure consisting of an amorphous

and a microcrystalline silicon layer
96 cells

2,400 N/m2 mechanical load-bearing capacity (245 kg/m2)

600 V DC maximum system voltage

IEC/EN 61646, IEC/EN 61730, Class II (VDE: 40023069)

The detailed guarantee conditions and additional information can
be found at www.sharp.eu.
End users are required to register the modules with Sharp in order
for the product and service warranty to be effective. The registration documents will be handed out by the installation staff or supplied directly by Sharp.
120
110
100
90
80
70
60
50
40
30
20
10
0
1,129
506
934
55
Frame
Solar cell
Junction box
Screw
Plug connectorJunction box
238 ± 20
38
+ 15
10
,
Open-circuit voltage I
sc
, V
oc
, P
max
(%)
I
sc
V
oc
P
max
120
110
100
90
80
70
60
50
40
30
20
10
1,129
506
934
55
Current (A)
Power (W)
Frame
Solar cell
Junction box
38
+ 15
10
sc
, V
oc
, P
max
(%)
I
sc
V
oc
P
max
2.5
2.0
1.5
1.0
0.5
0.0
100
90
80
70
60
50
40
30
20
10
10 20 30 40 50 60 70
600 (W/m2)
800 (W/m2)
1,000 (W/m2)
400 (W/m2)
200 (W/m2)
1,129
506
934
55
Frame
Solar cell
Junction box
Screw
Plug connectorJunction box
238 ± 20
46
38
+ 15
10
100
1,129
506
55
Frame
Solar cell
Junction box
Screw
Plug connectorJunction box
38
+ 15
10
100
Glass
Side seal
Solar cell
Back cover
Plastic
Frame
55
Solar cell
Junction box
Screw
Plug connectorJunction box
38
+ 15
10
Glass
Side seal
Solar cell
Back cover
Plastic
Frame
1,129
506
900 ±30
900 ±30
100
55
55
Frame
Solar cell
Junction box
Screw
Plug connectorJunction box
38
+ 15
10
100
Glass
Side seal
Solar cell
Back cover
Plastic
Frame
Mechanical data
Limit values
Cell
Connection 2 sub-modules in parallel
Dimensions 1,129 × 934 × 46 mm (1.05 m
Weight 18 kg
Connection type Cable with plug connector (MC-3)
Bypass diodes 1
Tandem cell of amorphous (-Si) and microcrystalline (c-Si) silicon
2
)
Storage air humidity (relative) up to 90 %
Operating temperature (cell) – 40 to + 90 °C
Storage temperature – 40 to + 90 °C
Maximum system voltage 600 V DC
Maximum mechanical load 2,400 N/m
Over-current protection 4 A
Electrical data
Initial values Nominal values
NA-953 (WQ) NA-901 (WQ) NA-851 (WQ) NA-953 (WQ) NA-901 (WQ) NA-851 (WQ)
Maximum power P
Open-circuit voltage V
Short-circuit current I
Voltage at point of maximum power V
Current at point of maximum power I
Module efficiency
max
oc
sc
mpp
mpp
 
m
NOCT 44 44 44 °C
Temperature coefficient – open-circuit voltage
Temperature coefficient – short-circuit current
Temperature coefficient – power
The electrical data applies under standard test conditions (STCs): irradiation 1,000 W/m2 with light spectrum AM 1.5 and a cell temperature of 25 °C. The rated electrical characteristics are subject to a manufacturing tolerance of ± 10%. NOCT conditions: irradiation of 800 W/m
 V
oc
 l
sc
 P
max
111.8 W
105.9 W
p
100 W
p
p
95 W
p
90 W
p
66.3 66.6 65.0 65.3 65.2 63.8 V
2.37 2.20 2.20 2.30 2.11 2 .11 A
52.7 53.5 52.0 48.0 49.3 49.0 V
2.12 1.9 8 1.92 1.98 1.83 1.74 A
9.0 8.5 8 .1 %
– 0.30 – 0.30 – 0.30 – 0.30 – 0.30 – 0.30 % / °C
+0.070 +0.070 +0.070 +0.070 +0.070 +0.070 % / °C
– 0.24 – 0.24 – 0.24 – 0.24 – 0.24 – 0.24 % / °C
2
, ambient temperature of 20 °C and wind speed of 1 m/sec.
85 W
p
2
The reference image on the front page shows a 4.5 kWp system of Sharp.
Characteristic curves NA-953 (WQ)
Characteristic curves: current / power vs. voltage
Voltage (V) Current vs. voltage
(cell temperature: 25 °C)
Power vs. voltage
Characteristic curves: open-circuit voltage /
short-circuit current vs. irradiation
(cell temperature: 25 °C)
Exterior dimensions
a division of Sharp Electronics (Europe) GmbH
Sonninstrasse 3, 20097 Hamburg, Germany
Tel: + 49 (0) 40 / 23 76 - 0 · Fax: + 49 (0) 40 / 23 76 - 21 93
Sharp Energy Solution Europe
www.sharp.eu
Irradiance (W/m
Applications
On-grid PV systems
Off-grid PV systems
On-roof PV systems
Ground-mounted PV systems
Please read our detailed installation manual carefully before installing the photovoltaic modules. The instructions in the installation manual must always be observed (e. g. max. of 7 modules in series, minus pole must be grounded, protection with blocking diodes/fuses).
A generator box with approved blocking diodes is available from your Sharp dealer.
2
)
Note
Cross-section A-A’ Cross-section B-B’
Connection cable
Local responsibility:
Austria
SolarInfo.at@sharp.eu
Benelux
SolarInfo.seb@sharp.eu
Central & Eastern Europe
SolarInfo.scee@sharp.eu
Technical data is subject to change without prior notice. Before using Sharp products, please request the latest data sheets from Sharp. Sharp accepts no responsibility for damage to devices which have been equipped with Sharp products on the basis of unverified information.
The specifications may deviate slightly and are not guaranteed. Installation and operating instructions are to be found in the corresponding handbooks, or can be downloaded from www.sharp.eu.
This module should not be directly connected to a load.
Scandinavia
SolarInfo.sen@sharp.eu
Denmark
SolarInfo.dk@sharp.eu
France
SolarInfo.fr@sharp.eu
Germany
SolarInfo.de@sharp.eu
Spain & Portugal
SolarInfo.es@sharp.eu
Switzerland
SolarInfo.ch@sharp.eu
United Kingdom
SolarInfo.uk@sharp.eu
Sola rNA_105 _E0210
NA-Serie (1,05 m
95 W | 90 W | 85 W
Mikroamorphe Silizium-Dünnschicht-Photovoltaikmodule
Solarstrom – ja bitte!
Weil er das Klima schützt.
2
, 600 V)
Innovationen vom Photovoltaikpionier
Als Solarspezialist mit 50 Jahren Erfahrung in der Photovoltaik (PV) trägt Sharp entscheidend zu weg­weisenden Fortschritten in der Solartechnologie bei.
Die Dünnschicht-Photovol­taikmodule der NA-Serie be­stehen aus einer amorphen und einer mikrokristallinen Siliziumschicht. Diese mikro ­amorphe Tandemstruktur absorbiert nicht nur die sichtbaren, sondern auch die nicht sichtbaren Anteile des Sonnen­spektrums. Dies führt zu einer besonders effektiven Nutzung der Sonnenenergie.
Sämtliche Modultypen der Sharp NA-Serie bieten technisch wie wirtschaftlich eine optimale Systemintegration und eignen sich für die Montage in netzgekoppelten und netzfernen PV-Anlagen.
Produktmerkmale
Tandemstruktur aus einer amorphen und einer mikrokristallinen
Siliziumschicht mit einem stabilisierten Modulwirkungsgrad von bis zu 9,0 %.
Die schwarze Moduloptik schafft ein harmonisches
Erscheinungsbild.
Höhere Energieerträge pro Watt sowohl bei hohen Temperaturen
als auch bei diffusem Licht.
Verwendung von vergütetem Weißglas, EVA-
Witterungsschutz
folie sowie eines eloxierten Aluminiumrahmens
Kunststoff und
mit Entwässerungsbohrungen für den Langzeiteinsatz.
Ausgang: Anschlusskabel mit wassergeschütztem Steckanschluss.
Qualität von Sharp
Der Qualitätsanspruch von Sharp Solar setzt Maßstäbe.
Ständige Kontrollen garantieren eine gleichbleibend hohe Qualität. Jedes Modul wird optisch, mechanisch und elektrisch geprüft. Sie erkennen es am Original Sharp Label, der Seriennummer und der Sharp Garantie:
5 Jahre Produktgarantie
10 Jahre Leistungsgarantie auf eine Leistungsabgabe von 90 %
Kurzinformationen für den Installateur
Tandemstruktur aus einer amorphen und einer

mikrokristallinen Siliziumschicht
96 Zellen

2.400 N/m2 mechanische Belastbarkeit (245 kg/m2)
600 V DC maximale Systemspannung
IEC/EN 61646, IEC/EN 61730, Schutzklasse II (VDE: 40023069)
Deutschland: INFO-HOTLINE Mo.–Fr. von 8–20 Uhr 01805 / 01 52 22
Österreich: INFO-HOTLINE Mo.–Fr. von 8 –20 Uhr 0820 / 40 06 40 (0,145 € / Min.)
|
INFO-FA X 01805 / 38 32 38 (0,14 € / Min. aus dem deutschen Festnetz, max. 0,42 € / Min. aus dem deutschen Mobilfunknetz)
25 Jahre Leistungsgarantie auf eine Leistungsabgabe von 80 %
Die detaillierten Garantiebedingungen sowie weiterführende Informationen erhalten Sie unter www.sharp.eu.
Zur Gewährung der Produkt- und Leistungsgarantie müssen die
Module durch den Endkunden bei Sharp registriert werden. Die Registrierungsunterlagen werden vom Installateur oder direkt von Sharp ausgehändigt.
|
INFO-FA X 0 8 2 0 / 2 4 6 2 5 9 (0,145 € / Min. aus dem Festnetz Österreichs, Anrufe aus dem Mobilfunknetz ggf. teurer)
Loading...
+ 5 hidden pages