2. General:The following parts are changed, added or disused for improvement of productivity.
(1) The main control ROM is changed from the one-time PROM to the mask ROM.
(2) One volume resistor (5 pcs.) on the PS-PCU PWB unit is disused. As a result of change
of parts supplier the parts code of volume resistor (3 pcs.) is changed.
(3) Since the parts supplier is changed, the parts code of speaker unit is changed.
(4) So as to ensure the common-use of parts the same shield case/PWB cover shield as that
used for Europe is applied.
(5) Since the present parts code of connector cover earth is not proper, it is changed.
(6) For installation of EMI countermeasures core the length of cable line is changed.
(7) Since the parts supplier is changed, the parts code of lamp unit is changed.
(8) For improvement of workability the notching is added to the PWB cover shield.
(9) The following parts are disused as electric wave measures.
(10)Since the manufacturer is changed, the parts code of panel PWB unit is changed.
(11)The LIU PWB unit is changed so as to ensure conformity to the Ireland line standard.
3. Change Cotect:
(12)The length of cable line of thermistor PWB unit is changed as CE-MARK measures.
(The unit code is not changed.)
(13)Since the parts supplier is changed, the parts code of AC cable is changed.
(14)Since the parts supplier is changed, the parts code of safety switch is changed.
(15)Since the parts supplier is changed, the parts code of SRAM256KB is changed.
(16)As CD-ROM is applied to the attached software, the CD-ROM specification indication
label is added to the packing case.
(1) Before change:VHI27080S003A → After change:VHILH5S860H-1
(2) Before change:RVR-MC211QCZZ → After change:RVR-MC212QCZZ
Before change:RVR-M151CQCZZ → After change:RVR-M151DQCZZ
Before change:RVR-MD511QCZZ → After change:RVR-MD512QCZZ
(3) Before change:DUNTK7431XCZZ → After change:DUNTK7431XSZZ
(4) Before change:PSLDM7026XCZZ → After change:PSLDM7026XCZ1
Before change:PCASZ7002XCZA → After change:PCASZ7002XCZB
4/7
(5) Before change:DHAI-7017XCZZ → After change:LPLTM7074XCZZ
(6) Before change:DUNTK7432XSZZ → After change:DUNTK7432XS11
Before change:CSW-M7039XS51 → After change:CSW-M7039XS52
(7) Before change:RLMPZ7012XCZZ → After change:RLMPZ7016XCZZ
Page 5
(8) Before change:PSLDM7026XCZZ → After change:PSLDM7026XCZ2
Before change:PSLDM7026XCZ1 → After change:PSLDM7026XCZ2
(9) Disused parts
DHAI-7016XCZZ 2 → 0
PTPEZ7051XCZZ 2 → 0
(10) Before change:CPWBF1091XC52 → After change:CPWBF1091XC31
Before change:CPWBF1091XC51 → After change:CPWBF1091XC32
Before change:CPWBF1091WS52 → After change:CPWBF1091XC31
Before change:CPWBF1091WS51 → After change:CPWBF1091XC32
(11) Before change:CPWBN7014WS51 → After change:CPWBS7026WS51
(12) Before change:105mm → After change:130mm
(13) Before change:QACCZ7622QCZZ → After change:QACCB7622QCZZ
(14) Before change:QSW-Z9030QCZZ → After change:QSW-M7041XCZZ
(15) Before change:VHIN341256J20 → After change:VHIW24257A12J
(16) Added parts
TLABP7416XCZZ(For North America) 0 → 1
TLABP7417XCZZ(For Europe) 0 → 1
4. Action:(1), (2), (3), (5), (6), (11), (13): From the production in August, 1998
(4):Running change from the middle of production in May, 1998
(7):From the production in October, 1998
(8):Running change from the middle of production in August, 1998
(9), (12):From the production in July, 1998
(10), (14):From the production in December, 1998
(15):Change is executed after exhaustion of existing stock (VHIN341256J20)
(17):From the production in November, 1998
6. Provision of unit for WIN FAX LITE service
1. Action:UX-3600M/F-3600M
2. General:The media of attached software for MFP was changed from FD to CD-ROM. The FD unit is
F
UX/FO/F
UX/FO/F
UX
F
UX/FO/F
F
UX/FO
UX/FO/F
UX
F
F
F
<Interchange>
1. Interchangeable.4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with "" is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for
maintaining the safety and performance of the set.