Sharp MD-SR50 User Manual

1

Insert a MiniDisc

Quick Guide

PORTABLE MINIDISC RECORDER

MODEL

MD-SR50H

Quick Setup Guide

Follow the setup procedure (1-3) before
you use this unit.

Quick Operation Guide

Explains basic recording and playback
procedures.

4

2

1

1 Slide the OPEN lever to re-

lease the compartment door.

2 Lift it up the compartment.

Insert according to
the direction arrow.

33

3 Insert a MiniDisc as shown.
4 Close the compartment door.

When you record on a MiniDisc,
check that the erase prevention tab
is set to the “recordable” position.

Refer to the operation manual for details.

Recordable

Recording
prevented

2

Connect the AC adaptor

To the DC IN 5V socket.

2

AC 230-240V,
50/60 Hz

1

3

Connection

OPTICAL/

LINE IN

Insert securely, all the way in.

1 Plug the AC adaptor into the

wall socket.

To wall socket.

2 Insert the plug on the other

end into the DC IN 5V socket.

AUDIO OUT

RIGHT LEFT

NOTE:

Refer to page 10 (operation manual) for connecting the unit to a stereo system
with “DIGITAL OUT” or “OPTICAL OUT” sockets.

T o a stereo system with “AUDIO OUT” or “LINE
OUT” sockets. (See left. Analogue connection)

Note:

● If the audio system has only one pair of socket then
they are usually input only and recording via this con­nection is not possible.