Sharp LC-32DHE4041K, LC-32CHE4041K User Manual

Download

HD Ready LED TV with Freeview HD, Saorview & USB PVR

User Guide

Model No

LC-32CHE4041K LC-32DHE4041K

Important safety instruction

Please read these instructions. All the safety and operating instructions should be read before the appliance is operated.

To prevent spread of ﬁ re, keep candles or other open ﬂ ames away from this product at all times

Warnings

• Television sets which weigh 20kg or more must be

lifted and carried by at least 2 people.

• This television does not contain any parts that are

serviceable by the user. In case of a fault, contact the manufacturer or authorised service department. Exposing the internal parts inside the TV may endanger your life. The manufacturers guarantee does not extend to faults caused by repairs carried out by unauthorised third parties.

• To reduce the risk of ﬁ re, electric shock or damage

to the TV, do not expose it to dust, rain or moisture. Never expose the TV to dripping or splashing and do not place objects ﬁ lled with liquids on or near the TV.

• Do not connect any external devices (DVD player,

games console etc) when the TV is switched on. Disconnect both the TV and device from the mains before connecting. Only switch appliances on when the connection process is complete.

• Do not place the television in a conﬁ ned space and

do not obstruct the ventilation openings at the rear of the television.

• When installing on a wall, ensure the TV is at

least 5cm from the wall for ventilation.

• Always ensure that the TV’s ventilation openings

are not covered with items such as newspapers, table-cloths, curtains, etc.

• Dispose of this television and any components

including batteries in an environmentally friendly manner. If in doubt, please contact your local authority for details of recycling.

• Ensure this TV is used in moderate climates only.

Safety

• For your safety, this appliance is ﬁ tted with a

fused 3 pin mains plug. Should the fuse need to be replaced, ensure that any replacement is of the same amperage and approved with the BSI mark.

• Never try and replace the mains plug unless you have

adequate qualiﬁ cations and are legally authorised to do so. In the event that a replacement mains cable is required, contact the manufacturer for a suitable replacement.

• Never use the television if it is damaged in any way.

• Always place the television on a ﬂ at level surface

avoiding anywhere which may be subject to strong vibration.

• The ideal distance to watch the television is

approximately ﬁ ve times the length of the diagonal measurements of the TV screen.

• Ensure the television is not placed on top of the

power cable as the weight of the television may damage the cable and cause a safety hazard.

• Never place mobile phones, speakers or any

other device which may cause magnetic or radio interference, near the television. If interference is apparent, move the device causing the interference away from the television.

• To disconnect the apparatus from the mains, please

use the mains plug located on the underside/rear of the TV.

• Ensure that the mains plug is always easily accessible.

WARNING: Excessive noise when using earphones and headphones can cause loss of hearing.

Maintenance

• To clean your TV, wipe with a soft, dry cloth. If the

surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or a weak detergent solution.

• Never use alcohol, paint thinner or benzene to clean

this unit.

• Before using a chemically treated cloth, read the

instructions that came with the cloth carefully.

CAUTION: If water or other liquid enters the television through the display panel surface, a malfunction may occur.

Packaging

• The safest way to transport your item is in the

original box/packaging - please save your packaging for this.

• You will need the original box/packaging in the

event of warranty/service repair or support. We are unable to carry out warranty/service if you are unable to package the item correctly.

Important information regarding use of video games, computers, captions or other  xed image displays

The extended use of  xed image program material can cause a permanent “shadow image” on the LCD/LED panel, also known as “screen burn”.

This “shadow image” can appear in the background during normal viewing. This type of irreversible LCD/LED panel deterioration can be limited by observing the following steps:

1. Reduce the brightness/contrast setting to a minimum suitable viewing level.

2. Do not display the  xed image for extended periods of time.

3. Turn the power o when not in use.

Examples of images that are more likely to cause “screen burn” are as follows (this is not an exhaustive list):

• TV channel logos: e.g. shopping channel logos and

pricing displays - especially if they are bright and stationary. Moving or low-contrast graphics are less likely to cause ageing of the screen.

• Time displays.

• Teletext: Do not view a stationary page for a long

period of time

• TV/DVD menus: e.g. listings of DVD disc content.

• Pause mode: Do not leave the TV in pause mode

for long periods of time, e.g. when watching DVDs or videos.

Important: Once ‘shadow image/screen burn’ occurs, it will never disappear and is not repairable under warranty.

How do I dispose of this product?

UK: Waste electrical products should not be

disposed of with household waste. Please dispose of the product at a designated collection point for recycling of WEEE. For your nearest facilities, please see www.recycle-more.co.uk or in store for details.

ROI: Waste electrical products should not be disposed of with household waste. Separate disposal facilities exist. Check with your local authority or retailer for recycling advice.

Batteries

• Do not expose batteries to high temperatures,

excessive heat, prolonged sunshine or ﬁ re as this may cause leakage, explosion or ignition. Observe the correct polarity when inserting batteries.

• Do not use different types of batteries together or

mix old and new batteries.

• Dispose of batteries in an environmentally

friendly way.

• Certain regions may regulate the disposal of

batteries. Please consult your local authority.

Trademarks

HDMI

The terms HDMI and HDMI High-De nition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries.

HDTV

The “HD TV” Logo is a trademark of DIGITALEUROPE.

DVB

The DVB logo is the registered trademark of the Digital Video Broadcasting (DVB) project.

Dolby

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

FREEVIEW

The FREEVIEW words and logos are trade marks of DTV Services LTD. © DTV Services Ltd.

SAORVIEW

SAORVIEW is a registered trademark owned by RTÉ.

TV Models with built in DVD players

CAUTION:

THIS UNIT IS A CLASS 1 LASER PRODUCT. THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE PLAYER CORRECTLY AS INSTRUCTED. WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT

This caution label is located on the rear panel of the unit

CONTENTS

Manufacturers guarantee information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

What is included in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Attaching / detaching the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Securing the TV to a wall / wall mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

TV buttons and Input Source menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

TV menu operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-24

Picture menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-18

Sound menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Channel menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Lock menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Time menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Network conﬁ guration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Settings menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

7 day TV guide and channel list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

USB record - Freeview / Saorview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

USB mode / media player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-34

Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-31

Technical speciﬁ cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-34

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.

What is included in the box

WHAT IS INCLUDED IN THE BOX

Accessories

Included with this TV are the following accessories.

1 x User guide

User guide

1 x Quick start guide

Quick start

guide

1 x TV

1 x Remote Control

2 x AAA Batteries

1 x Mini component / YPbPr cable

1 x Stand installation pack

4 x

1 x L (left)

1 x RF cable

Please save your box/packaging as you will need this in the event of warranty/service repair or support. We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to package your item in the event of warranty/service repair is in it’s original box/packaging.

1 x R (right)

Attaching/Detaching the Stand

ATTACHING THE STAND

Attaching the stand

To complete the stand/feet installation you will require a cross head screw driver.

Screws that are included.

4 x

TV panel must be facing downwards.

(ﬁ g.1) Place the TV set on a ﬂ at and clean surface with the panel facing downwards to avoid damage, then ﬁ x the stand feet shown.

Back/Shortest

(ﬁ g.2) When the stand feet are installed correctly the stand feet will be longest at the front of the TV and shortest at the back with the

Front/Longest

feet pointing away from each other.

3 4

(ﬁ g.3) When the stand feet are in the correct position, secure the stand feet to the underside of the

4 x

TV set using the 4 screws provided.

Detaching the stand

Remove the screws highlighted then remove the stand feet from the underside of the TV set.

3 4

4 x

Securing the TV to a Wall/Wall Mounting

SECURING THE TV TO A WALL

Securing the TV to a wall with anti-tip straps

For maximum security in the home when using a TV with its stand anti-tip straps should be ﬁ tted. These are available from supermarket websites and other websites and are an easy, inexpensive and effective way of ensuring your TV stays safely upright. Straps are designed to be attached to the rear of the TV and then tethered to the wall or the furniture the TV is stood on.

Note - Please ensure that children do not climb on the TV set.

A) Using one or both of the top wall-mounting holes and screws (the screws are already supplied in the wall mounting holes) fasten one end of the fastening cord/s to the TV.

The Royal Society for the Prevention of Accidents is urging people to take care with ﬂ at-screen televisions.

RoSPA stated in 2010 that “Toddlers are particularly at risk of pulling ﬂ at-screen televisions on to themselves. They are unsteady on their feet and are attracted by colourful television images.”

The risk is increased as televisions become lighter.

Wall Mounting

IMPORTANT - Before drilling any holes in the wall ensure you are not drilling where there could be any electrical wires, water or gas pipes.

1) Remove the four screws highlighted that are supplied in the wall mounting holes.

2) The wall mount can now be easily attached to the mounting holes on the rear of the TV.

For VESA wall mounting information please refer to the Technical Speciﬁ cation page.

For optimum viewing, if wall mounting the TV higher than eye level, the TV should be tilted downwards so that the TV’s screen is ‘face on’. See ﬁ g 1 and 2.

g 1 ﬁg 2

INCORRECT

B) Secure the other end of the fastening cord/s to your wall. (you will need screws/ﬁ xings suitable for your wall type - available separately from most DIY stores).

CORRECT

Viewing angle

Important – If wall mounting this TV, only use the screws already provided in the wall mounting holes. Using other screws which are longer could cause irreparable damage to internal parts.

Viewing angle

Remote control

REMOTE CONTROL

Key

For models with integrated DVD players. For models with PVR Function. For models with USB Playback.

STANDBY - Switch on TV when in standby or vice versa. MUTE - Mute the sound or vice versa. DTV - Switch to digital source. RADIO - Switch to radio whilst in digital TV source. USB - Switch to USB source. DVD - Switch to DVD source.

NUMBER BUTTONS - 0–9 to select a TV channel directly. TV GUIDE - Opens the 7 day TV guide (digital TV mode).

- To return to the previous channel viewed.

VOL (+/-) - To increase/decrease the sound level. P.MODE - Scrolls through picture mode options. S.MODE - Scrolls through sound mode options. FAV - To display favourites menu. CH (+/-) - To increase or decrease the channel being watched. MENU - To display OSD menu. EXIT - To exit all menus.

.the system settings to your preference.

SOURCE - To display the input/source menu. INFO - Press once for now/next channel information.

- Press twice for information about the current programme.

- Allows you to navigate the on-screen menus and adjust

ASPECT - To switch the screen between the different picture formats. SLEEP - Press repeatedly to cycle through the sleep options. AUDIO - To change the audio language (if available). SUBTITLE - To switch the dialogue at the bottom of the screen (on/off). TEXT - To enter/exit Text. TEXT HOLD - Teletext mode - Holds current page which is

displayed (Analogue TV).

DISPLAY - To switch off the screen when listening to radio. TEXT/DVD ZOOM - Zoom function for Teletext and DVD. DVD MENU/RECORD - Access the DVD menu and USB record function.

- To restart the current chapter

- To advance forward to the next chapter

- To stop the playback/Eject Disc

(To EJECT the disc press/hold the button for 4 seconds)

- To play in fast rewind mode

- To play in fast forward mode

- To play/pause

DVD SETUP/REC LIST - Opens up DVD menu or opens the list of what has been previously recorded.

GOTO - To go to a speciﬁ c chapter. A-B - Press once to set point, press a second time to return to point. ANGLE - Select different angle of DVD. REPEAT - To repeat playback.

1111

TV Buttons and Input Source Menu

TV BUTTONS AND INPUT SOURCE MENU

This information is for models

without built in DVD players

Standby Power On/Off

Displays the input source menu

Displays Menu/OSD

Programme/Channel down and menu down

Programme/Channel up and menu up

Volume down and menu left

Volume up and menu right

This information is for models

with built in DVD players

Standby Power On/Off

Displays the input source menu

Displays Menu/OSD

Programme/Channel down and menu down

Programme/Channel up and menu up

Volume down and menu left

Volume up and menu right

Play/Pause Disc

Stop/Eject Disc

Note: The shape of the TV buttons may vary by model.

Choosing Mode Input/Source

Use the source menu to switch between input/connections.

A) Using the buttons on the remote control:

1) Press [SOURCE] - The source menu will appear.

2) Press [\/] or [/\] to select the input you require.

3) Press [OK].

B) Using the buttons on the Television:

1) Press [SOURCE].

2) Scroll up / down using CH+/ CH- buttons to the input/source you require.

3) Press Vol+ to change input/source to the one selected.

For further information on input/connections please view ‘Connections’ pages.

An example of the ‘Input Source’ menu

(will vary by model)

Connections

CONNECTIONS

EARPHONE

VIDEO

Y Pb Pr

CI CARD IN

USB

Digital Audio

VGA/PC IN

VGA /PC(Audio in)

Output

EARPHONE Earphone socket

LAN* Network connection

Video Component / Video input

L/R

YPbPr HD input (Ypbpr)

HDMI 1 HDMI input

HDMI 2 (ARC) HDMI input

L/R Audio shared for Video/Composite and component/ YPbPr

VGA PC VGA-PC input

VGA PC audio in 3.5mm PC audio input

RF IN RF / TV Aerial Input

Digital audio Digital optical audio output

HDMI 3 HDMI input

USB x 2 USB port

COMPONENT (HD) Component input (YPbPr)

1313

Connections

CONNECTIONS

Note: Connecting cables are shown for example only and may not be included. Please check ‘What Is Included In The Box’ page.

Connecting to a device with Composite AV/Video output

TV Source should be set to Composite/AV

L (white)

R (red)

Video (yellow)

L (white)

R (red)

Video (yellow)

Connecting to a device with SCART output (using SCART to AV cable)

TV Source should be set to Composite/AV

L (white)

R (red)

Video (Yellow)

SCART

Connecting to a device with HDMI output

A HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio with minimal loss of quality.

TV Source should be set to the corresponding HDMI port (HDMI 1, HDMI 2 etc)

Connections

CONNECTIONS

Connecting to a device with Component/YPbPr output

If you are supplied with a cable from the device which has RED, GREEN, BLUE, RED & WHITE connectors you must connect via Component (for picture) and by phono cable (for sound).

TV source should be set to Component/YPbPr

Y (green)

Mini

YPbPr

L (white)

R (red)

Connecting to a device with VGA/PC output (Laptop or Desktop Computer)

TV Source should be set to VGA/PC

PB (blue)

PR (red)

L (white)

R (red)

VGA/PC

VGA/PC (AUDIO

IN)

VGA/PC

OUT

AUDIO

OUT

Connecting to an external audio device (Ampliﬁ ers, Surround Sound, Sound Bars etc)

When connecting via the TV’s 3.5mm earphone output, this will disable the TV speakers.

3.5mm

earphone

Digital

audio

out

(optical)

OPTION 1 for 3.5mm EARPHONE Output

OPTION 2 for Digital Optical Audio Output

3.5mm audio

Digital

audio

(optical)

Connecting an Ethernet/Network cable

The LAN/Ethernet port is used for Freeview HD services only.

Ethernet port

1515

TV Menu Operation

PICTURE MENU

To access this menu, press [MENU] button on the remote control. To select a sub menu press [OK]

If you wish to make changes to any of the default settings, use the scroll buttons. To conﬁ rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.

Picture Mode - Choose from the following presets:

Dynamic Recommended settings for fast moving pictures

Standard Standard settings

Mild Set to be lighter in colour and less bright

Personal Lets you manually alter all the settings

Economy Power saving mode which reduces the energy used by up to 25% (by reducing the

power to the LED/LCD panel). In Economy mode, the TV will switch itself to

Standby mode after 3-5 hours in the event that the TV buttons or remote control

buttons are not pressed (change the picture mode to another setting to de-activate

this function)

You can make the following adjustments in

• Contrast - Switch the balance between black and white.

• Brightness - Increase or decrease the brightness of the picture.

• Colour - Increases the colour from black and white.

• Tint - Lets you increase or decrease the level of tint within the picture

(only available for NTSC input signal).

• Sharpness - Increase or decrease the sharpness of the picture.

Colour Temperature Choose from the following presets:

Normal Default settings

Warm Increases red within the picture

Cold Increases blue within the picture

Personal mode:

1717

TV Menu Operation

PICTURE MENU

To access this menu, press [MENU] button on the remote control. To select a sub menu press [OK]

If you wish to make changes to any of the default settings, use the scroll

buttons.

To conﬁ rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.

Aspect Ratio - Within the UK the picture format varies depending on the channel/broadcast. There are a

number of different options to best meet your needs. Choose from the following settings:

Auto

Automatically displays the best picture format so the picture is in the correct position, black lines maybe

viewable at the top/bottom and/or sides.

4:3

Displays the 4:3 picture in its original size. Side bars are shown to ﬁ ll the 16:9 screen

Fills the screen with a regular 16:9 signal and 4:3 picture format will be stretched to ﬁ ll the screen

Full Screen

Zoom1 and Zoom 216:9

Displays a picture in the Full creen size without overscan. 16:9 signal will be displaied in original proportion. Other picture format will be stretched to ﬁll the screen.

The picture is the correct proportion but zoomed in to ﬁ ll the screen

Noise Reduction - Allows you to switch noise reduction ON or OFF.

TV Menu Operation

SOUND MENU

Sound Mode - Choose from the following presets

Standard Default settings

Music Emphasises music over voices

Movie Provides live and full sound for movies

Sports Emphasises sound for sports

Personal Selects your personal sound settings

You can make the following adjustments in Personal mode:

• Treble - Allows you to adjust treble levels to suit your listening preferences.

• Bass - Allows you to adjust bass levels to suit your listening preferences.

• Balance - To switch the sound between the left and right speakers.

Auto Volume Level (AVL) - When ‘on’ is selected, the volume will attempt to stay at a constant level

regardless of TV programme and advertisements.

DTS TruSurround - Choose from the following presets

Off Off

On On - TruSurround™ creates an immersive, feature-rich surround

sound experience from two speakers, complete with rich bass, high frequency detail

and clear dialog

Digital Output - This is the digital optical audio output. Choose from the following options:

Off To turn off Digital Output

Auto Selects the best settings automatically

PCM Select this option if you are connecting to a Stereo Hi-ﬁ via optical cable (Pulse-code

modulation (PCM) is a digital representation of an analogue signal)

Audio Description - This allows the user to switch Audio Description ON or OFF. (Audio Description is

a service available on certain programmes. It provides a description of what is happening during the

selected programme for a person who is visually impaired).

AD Volume - This allows the user to increase and decrease the AD (Audio Description) volume level.

Audio Delay - Enables the user to adjust setting to sync picture and audio.

SPDIF Delay - Enables the user to adjust sound setting to sync picture and audio for external speakers

connected via digital audio output.

1919

TV Menu Operation

CHANNEL MENU

To access this menu, press [MENU] button on the remote control and scroll right. To select a sub menu press [OK]

If you wish to make changes to any of the default settings, use the scroll buttons. To conﬁ rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.

Auto Tuning - Allows you to retune the television for all digital channels, digital radio stations and

analogue devices.

Analogue Manual Tuning - Allows you to manually tune your analogue signal.

Freeview/Saorview Manual Tuning* - Allows you to manually tune your digital signal.

Channel Edit - Allows you to delete, move, skip and select favourite channels.

Important: To receive Freeview/Saorview channels, in particular HD channels, you will need a Digital TV aerial and be in a good Freeview/ Saorview coverage area. You can check the coverage for your area at www.freeview.co.uk or www.saorview.ie

Please note that any Freeview HD channels found during tuning will be placed in channel positions above 100. For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.

*Freeview channels are only available in the UK, Saorview channels are only available in the ROI.

Signal Information - Allows you to view signal frequency, signal quality and signal strength.

CI Information - Pay per view services require a “smartcard” to be inserted into the TV. If you subscribe to

a pay per view service the provider will issue you with a ‘CAM’ and a “smartcard”. The CAM can then be

inserted into the COMMON INTERFACE PORT (CI Card In).

Recorded List - Shows a list of recorded TV programmes.

Schedule List - Lists your programme reminders.

OAD (Software Update) - Switch on/off OAD (over air download) software updates.

Tip: If you do not press any buttons for 30 seconds, the menu will automatically exit. You can change the length of time before the menu exits automatically - see ‘OSD Timer’ in the Time Menu

TV Menu Operation

LOCK MENU

To access this menu, press [MENU] button on the remote control and scroll right. To select a sub menu press [OK]

If you wish to make changes to any of the default settings, use the scroll buttons. To conﬁ rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.

System/Hotel Lock - Allows you to lock or unlock the menu. You will be asked to enter a 4 digit password

◄ button to quit the password input or use the ► button to clear. Default password is 0000.

Use the

Change Password - Allows you to change the password.

Channel Lock - Allows you to lock certain channels manually.

Parental Guidance - Allows you to set the rating to block certain content based on age information.

TV Button Lock - Allows you to lock the buttons on the side of the TV set.

Default Source - Allows the user to set the default source. The default source is the source the TV starts on

when ﬁ rst switched on.

Default Channel - Allows the user to set a channel as the default channel on the Digital source. The

default channel is the channel the TV starts on when ﬁ rst switched on.

Max Volume - Allows you to adjust and set the maximum volume.

Source Lock - Allows you to lock the source menu.

2121

TV Menu Operation

TIME MENU

To access this menu, press [MENU] button on the remote control and scroll right. To select a sub menu press [OK]

If you wish to make changes to any of the default settings, use the scroll buttons. To conﬁ rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.

Off Time - Allows you to set aspeciﬁ c time for your TV to turn off.

On Time - Allows you to set aspeciﬁ c time for your TV to turn on, the channel it will then display, the

source it will be on and also the volume. This function can then be toggled to repeat every day or

acertain day.

Sleep Timer - Lets you set the sleep timer so the television automatically switches off after a set amount

of time. Off -> 10min -> 20min -> 30min -> 60min -> 90min -> 120min -> 180min -> 240min.

OSD Timer - Lets you adjust the amount of time the On Screen Menu stays on the screen

before disappearing. Off -> 5secs -> 15secs -> 30secs -> 60secs.

Auto standby - Set ‘Auto Standby’ to OFF, 3 hours, 4 hours or 5 hours.

Time Zone - Change your current time zone.

Network Conﬁ guration

NETWORK CONFIGURATION

To access this menu, press [MENU] button on the remote control and scroll right. To select a sub menu press [OK]

If you wish to make changes to any of the default settings, use the scroll To conﬁ rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.

The Network connection is only intended to access Pay TV services from your Freeview/Saorview broadcaster. Please note, the TV cannot be used for internet access.

For the network conﬁ guration to work the TV will need to be connected to your home network via an ethernet cable, with these requirements in place the TV will connect to the network automatically.

IP Conﬁ g - Allows you to access LAN network connection settings. choose from the following options:

Auto Will automatically connect the TV to your home network(this is the default setting

and is highly recommended)

Manual Allows you to manually change the IP, Netmask, Gateway and DNS information.

Network Info - Allows you to view Information about network settings

Network Test - Allows you to test the network connection.

buttons.

2323

TV Menu Operation

SETTINGS MENU

Language - Allows you to change the language of the menu.

Audio Language - Select your preferred primary audio language.

Audio Language 2 - Select your preferred secondary audio language.

Subtitle Language - Select your preferred primary subtitle language.

Subtitle Language 2 - Select your preferred secondary subtitle language.

Hearing Impaired

the screen which provide a description of what is happening during the selected program.

Blue Screen - Changes the background when there is no input between clear and a blue background (Only

available on some sources).

PVR File System - PVR Recording options:

Select disk Select USB port and disk partition

TimeShift Size Set size time of shift buffer.

Format Start You can format connected USB storage device to FAT 32 ﬁ le system.

WARNING: ALL DATA ON THE USB DEVICE WILL BE DELETED

Speed check Tests write speed of connected USB storage devices.

- This allows the user to turn on the Hearing Impaired function, this produces subtitles on

First Time Installation - Allows you to access the First Time Installation menu and retune the TV set.

Software Update (USB) - Allows you to update your TV with the newest software using a USB memory stick.

Software and instructions are available on our website.

Software Update (NET) - Allows you to update your TV with the newest software via your internet

connection. This will require the TV to be connected to the internet and have a blank USB memory stick

inserted in to the USB input of the TV. The software will be downloaded on to the blank USB memory stick

and then complete the update process.

- This resets the menus to factory settings and clears all the TV channels from the television.

Reset TV

HDMI CEC (Consumer Electronic Control) - Allows HDMI devices to control each other and allows the user to

operate multiple devices with one remote control. (only available with compatible devices).

LED Status - Allows the user to switch the LED power indicator light ON or OFF when the TV being operated.

(When this option is set to OFF the LED power indicator light will ﬂ ash when the remote control is used).

Version Info - Allows you to view the version/information of the software installed on the TV set.

Store Mode - switch ON/OFF shop demonstration mode (available only if store mode was selected during ﬁ rst

time installation).

Note: For further support with software updates, contact our technical support team or refer to the ‘product support’ section of the website. If the TV is using the newest software available it will not attempt to update the software.

7 Day TV Guide and Channel List

7 Day TV GUIDE

11 Dec 2014 12: 58

1 BBC ONE Oxford

CHANNEL

1 BBC ONE Oxford

2 BBC TWO 3 ITV

4 Channel 4 5 Channel 5

6 ITV2

7 BBC THREE 9 BBC FOUR

12:15 - 13:00 11 Dec 2014 Norfolk: Tim wonnacott and the teams are in Norfolk in search of great buys to take to auction. Expertise comes from Catherine Southon and Jonathan Pratt, and Tim visits Ham House.

Lifestyle

12:00

Bargain Hunt

Daily Politics The Blue Planet

Let’s Do Christmas with Gino and Mel

Come Dine with Me

Coronation Street

Three Wise Women

You’ve Been Framed! Royal...

This is BBC Three

This is BBC Four

Come Dine with Me

Come Dine...

ITV News & Weather

Jame...

5..

Record Move

Remind

Info

Prev Day

EXIT

Next Day

Home and Away

BBC News at One South...

Doctors

13:00 13:30Now

Info. Exit.

7 DAY TV GUIDE

TV Guide is available in Saorview/Freeview TV mode. It provides information about forthcoming programmes (where supported by the Saorview/Freeview channel). You can view the start and end time of all programmes and on all channels for the next 7 days and set reminders.

1) Press [TV GUIDE] on the remote control, the following 7 Day TV Guide will appear.

2) Navigate through the menu using

You can now:

Record a programme by pressing RED (USB device must be connected) Set a reminder by pressing GREEN View a previous day by pressing YELLOW View the next day by pressing BLUE

3) Press [EXIT] to exit the 7 day TV Guide

Channel List

To view the channel list, please ensure that the TV is set to either the analogue or digital source and no menus or TV notiﬁ cations are displayed.

1) Press [OK] on the remote control and the channel list menu will appear.

2) Press LEFT / RIGHT arrow to ﬁ lter desired channel types (Digital TV, Radio, All).

3) Scroll through the channel list by using buttons then press [OK] to view the channel that is currently highlighted.

4) Press [EXIT] to exit the channel list.

2525

DVD Setup

DVD SETUP

(Applies to models with built in DVD player)

To enter this menu please ensure the TV is in DVD source & press [DVD SETUP]

If you wish to make changes to any of the default settings, use the scroll To conﬁ rm any settings press [OK] button. To exit this menu at anytime, press [DVD SETUP] button.

TV Display - Choose from the following options

4:3 Pan scan PS Traditional picture format, often used on old ﬁ lm

4:3 Letter box LB Traditional picture which has been adapted for widescreen

Wide 16:9 Widescreen picture format

Speaker Setup - Choose from the following options

LT/RT Converts from multi-channel sound to mono

Stereo Converts from multi-channel sound to stereo

Dual Mono - Choose from the following options

Stereo Outputs 2 channels of sound both left and right

Mono L Outputs left side sound

Mono R Outputs right side sound

Mix Mono Outputs a single channel of sound but mix between right and left

Dynamic Range - This is the difference between the quietest and loudest sounds. This setting works only

with DVD discs recorded in Dolby digital.

Full Set this to listen with the range recorded on the disc

3/4 Set this to listen with a range equivalent to a normal television

1/2 Set this to listen with a smaller difference between the maximum and minimum volume

1/4 Set this to listen with a smaller difference between the maximum and minimum volume

Off Set dynamic range to off

TV Type - Choose from the following options

PAL For discs from UK/Europe, Asia, Australia etc

Multi For both NTSC and PAL

NTSC For discs from North America, Japan etc

buttons.

Default - Choose from the following options

Reset Resets all options in the ‘DVD setup’ menu back to the default settings

Tip: This TV/DVD player is pre-set to play Region 2 DVDs. In the event you wish to use the TV/DVD in another country that uses different region discs, please visit www.umc-uk.co.uk. Select ‘Product Support’, ‘Changing Region’.

2727

USB Record - Freeview/Saorview

USB RECORD - FREEVIEW/SAORVIEW MODE

Built into this television is a USB record facility. This function is available in Freeview/Saorview mode when used in conjunction with a compatible USB memory stick or USB hard drive. The beneﬁ ts of this are as follows:

• Pause live TV and then playback, fast forward and rewind (up to live TV)

• One button record, if you decide you want to record the current programme

• Easy programmable recording from the 7 day TV Guide

• Record TV and watch/listen back on your computer/laptop

Due to the nature of the product, it is necessary to use a high speed USB memory stick (as the TV reads from and writes to the memory stick at the same time, some memory sticks may not be suitable)

You can purchase high speed memory sticks from some computer stores, alternatively, we have a selection of tested and compatible memory sticks available to purchase directly from the helpline/website.

Minimum speciﬁ cation - USB Memory Stick

Read Speed 80 MB/s (Mega Byte Per Second)

Write Speed 40 MB/s (Mega Byte Per Second)

If you wish to use a USB portable hard drive larger than 32GB, please refer to the FAQ section at the rear of this user guide.

Pause live TV (time shift)

Pausing Live TV is very simple.

- Press the play/pause button and the television will pause and the live

content will be recorded. To resume watching press play/pause again.

- Press fast forward to go forward in a recording (i.e. to skip adverts)

- Press fast rewind to go back in a recording (i.e. if you fast forwarded too

far)

Tip: When you switch the TV to standby or change channel the time shift memory is wiped. To restart time shift you must press play/pause button.

One button record

At any point in time you may decide to record the current channel that you are watching. To do this you need to press the red button highlighted below.

Tip: This television contains one TV tuner, therefore it can only record the channel you are watching or record one channel while the television is in standby mode.

Note: USB record function is only available in Freeview/Saorview TV mode. Due to copyright laws and illegal copying/recording it is not possible to record to/from any other input/output source.

USB Mode/Media Player

USB MODE/MEDIA PLAYER

USB mode offers playback of various different types of content that you have saved on your USB Memory Stick.

On switching to USB source the below menu screen will appear. The content will be divided into Photo, Music, Movie and Text based on ﬁ le type.

1) You can navigate through the menus using the scroll

to conﬁ rm the item you wish to play/view press the [OK] button.

3) You can now access the item. Press OK to view.

Tip: If you experience a playback issue, please ensure the ﬁ les being used are the correct format (example - the picture plays but no sound) See technical speciﬁ cation page for compatible ﬁ le types

Note: USB extension cables are not recommended as they can cause a reduction in picture/audio quality and stoppages during play back of USB content.

buttons on the remote control,

2) Select the drive you require. (If your drive only has 1 partition you will only see 1 item).

4) Whilst viewing your media, you can control the item by using the remote control buttons (below) or by pressing (Info) to access the on-screen playback menu, you can now make your selection by using the and (OK) buttons on the remote control.

Fig.A

2929

General Information

FREQUENTLY ASKED QUESTIONS

General I would like to have louder

General Why are some options in the menu

General Can I stop my TV automatically

TV I have tuned in Digital TV but I

TV I have re-tuned my television but

VCR/DVD Recorder

Game Consoles I have connected my Playstation/

System Lock I have changed the password

Freeview HD I cannot access all Freeview

Freeview HD I cannot  nd the Freeview HD

sound by connecting additional speakers. For TV models with digital optical audio output.

unavailable and greyed out.

turning o after 4hrs?

am not receiving any or all of the channels and/or the channels I receive are breaking up.

when I switch it o it is not storing the channels.

I have connected the TV to my VCR or DVD Recorder via SCART but it is not recording.

Xbox to the TV via HDMI, but I am not receiving any pictures or sound on my TV

Xbox to the TV via Component cables (red, green & blue) but I am not receiving any sound.

on the television and now forgotten it.

channels.

1) Use the 3.5mm headphone output and a 3.5mm to phono cable (available separately) to connect to an ampliﬁ er/surround sound system. Please note this will deactivate the TV’s built in speakers.

2) Connect a digital optical audio cable from the TV’s digital optical audio output to your ampliﬁ er/surround systems digital optical audio input.

Some options are only available in certain sources, i.e. HDMI. They are unavailable in the other sources where they have no a ect.

Yes, in the ‘Time’ menu settings, scroll down to Auto standby and select OFF.

1) Check you are in an area that can receive Freeview/Saorview, visit www.freeview.co.uk or www.saorview.ie

2) Check you are using an aerial that is able to receive a good digital signal. In most cases, you will need an outdoor digital hi-gain/wideband aerial. In areas that have excellent digital coverage, you may be able to use a loft type aerial but it is highly likely that you will also need to connect a booster between the back of the TV and the TV aerial wall socket. Unfortunately, to receive a good enough digital signal, it is not possible to use a portable/ indoor type aerial.

If the TV does not save the channels when you power it o , it’s likely the channel database has become corrupt.

1) Turn o the TV.

2) Remove the RF/Aerial cable from the rear of the TV and then turn the TV back on again.

3) Using the remote control, press Menu followed by 8-8-8-8 to enter the initial setup/ rst

time installation menu.

4) Press OK (let the TV run the full tuning process).

5) Once completed, turn o the TV, reconnect the RF/Aerial cable then turn the TV back on

again.

6) Repeat steps 3 & 4.

In addition to connecting via SCART, you should connect the aerial cable from the wall socket to your VCR/DVD Recorder and another aerial cable from the VCR/DVD Recorder to the TV.

1) Ensure the TVs’ source is set to HDMI.

2) Check your settings on your Playstation/Xbox are as per the Playstation/Xbox instruction manual.

Component cables only provide HD pictures. For the sound you will need to connect the red & white audio cables on the Playstation/Xbox to the red & white phono inputs (or mini AV input where  tted) on the rear of the TV. Please refer to the ‘Connections’ pages.

There is a master password of 4711, to gain access to the TV menu and reset the normal password.

Some data channels for Freeview can only be obtained when the TV ‘s ethernet port is connected to your router.

Freeview HD channels found during tuning will be placed in channel positions above 100. For example, 101 (BBC1 HD), 102 (BBC2 HD) etc.

General Information

FREQUENTLY ASKED QUESTIONS

USB Mode I have inserted a USB Memory

USB Mode Using a USB portable hard drive

DVD (For TV models with DVD only)

USB Record I cannot change the channel,

USB Record When using the USB to record

Key, but the TV does not recognise it.

/ larger than 32GB.

I have inserted a disc but it is not playing.

I have pressed the eject button but the disc is not coming out.

access the menu or use the red button.

the picture ‘breaks up’ or experience loss of sound.

Ensure the USB Memory Key is formatted to type FAT32.

If you wish to use a portable hard drive larger than 32GB, please note that it must be formatted to the FAT32  le system in order to operate on this TV. Windows XP/Vista computers are only capable of formatting up to 32GB, therefore, you will need a software programme/utility to format larger hard drives. Please refer to the website, www.umc-uk.co.uk, for more information.

1) Ensure you have inserted the disc facing the correct way.

2) Ensure the disc is clean and is not scratched.

3) Some copied discs will not play.

4) Check the DVD is a region 2 disc – to change the region of the DVD player, refer to www.umc-uk.co.uk, select ‘Changing DVD Region’ in the ‘Produc t Support’ section

To eject the disc hold the stop/eject button for 4 seconds.

During time shift you cannot change the channel, access the menu or use the red button.

Check the USB memory stick meets the minimum read speed requirements. Standard de nition channels require a read speed of 20 MB/s (Mega Byte per second) and a write Speed of 6 MB/s (Mega Byte per second) HD channels require the read speed of 80 MB/s (Mega Byte per second) and a write speed of 40 MB/s (Mega Byte per second). USB 3.0 sticks should be used where possible.

3131

TECHNICAL SPECIFICATION

Product  che

General Information

Trademark

Model ID

Energy e ciency class A+

Visible screen size (diagonal)

On mode power consumption 31.0 W

Annual energy consumption *1 45.0 kWh

Standby power consumption *2 <0.50 W

O mode power consumption n/a

Screen resolution 1366 (H) x 768 (V)

*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used. *2: When the TV is turned o with the remote control/standby button and no function is active.

Sharp

LC-32CHE4041K

81 cm / 32 inches

Additional Technical Information

RF 75 ohm Antenna / Analog / DVB

Inputs 3 x HDMI, 2 x USB,1 x RJ45 (Ethernet),

Sound Outputs 1 x 3.5mm Headphone, 1 x Optical digital audio out

Speaker / Sound Watts (RMS) 2 x 5 / 2 x 3

Voltage and power consumption 220-240V 50Hz

Dimensions including stand (mm)

Net weight (Kgs) 4.6

Wall Mounting VESA 200 x 100 (mm)

1 x VGA/PC, 1 x 3.5mm jack for PC audio input,

1 x Mini Component/Y Pb Pr,

1 x Composite/Video & L/R Audio shared for

Composite/Video & Component/YPbPr

31/45/70W (ecomode/max)

739W x 485H x 180D

General Information

TECHNICAL SPECIFICATION

Product  che (With built in DVD player)

Trademark

Model ID

Energy e ciency class A+

Visible screen size (diagonal)

On mode power consumption 31.0 W

Annual energy consumption *1 45.0 kWh

Standby power consumption *2 <0.50 W

O mode power consumption n/a

Screen resolution

Sharp

LC-32DHE4041K

81 cm / 32 inches

1366 (H) x 768 (V)

Additional Technical Information

RF 75 ohm Antenna / Analog / DVB

Inputs 3 x HDMI, 2 x USB,1 x RJ45 (Ethernet),

Sound Outputs 1 x 3.5mm Headphone, 1 x Optical digital audio out

Speaker / Sound Watts (RMS) 2 x 5 / 2 x 3

Voltage and power consumption 220-240V 50Hz

Dimensions including stand (mm)

Net weight (Kgs) 4.9

Wall Mounting VESA 200 x 100 (mm)

1 x VGA/PC, 1 x 3.5mm jack for PC audio input,

1 x Mini Component/Y Pb Pr,

1 x Composite/Video & L/R Audio shared for

Composite/Video & Component/YPbPr

31/45/80W (ecomode/max)

739W x 485H x 180D

3333

General Information

TECHNICAL SPECIFICATION

Compatible ﬁ les in USB Mode

Media File Ext.

.mpg/.mpeg

/.dat

.ts/.trp/.tp/.

m2ts

.vob MPEG-2

.mp4

.rm/.rmvb Rm codec

Movie

Music

Photo

.mkv

.avi

Motion JPEG JPEG

.asf,wmv VC1

.flv/.swf

.mp3 --

.wma/.asf --

.ogg -- OGG Sample Rate: ~48KHz

.m4a/.aac -- AAC HEAAC

.jpg/ .jpeg

.bmp BMP

.png

Video Decoder

Video Audio

MPEG-1, MPEG-2

MPEG-2, H.264,VC1,AVS

MPEG-4, Xvid, H.264

MPEG-1, MPEG-2, MPEG-4,

H.264

MPEG-2, MPEG-4,

Xvid, H.264

H.264, AVC, Sorenson

H.263

Progressive JPEG Max Resolution: 1024×768

Baseline JPEG

Non-Interlaced

Interlaced Max Resolution: 1200×800

MP3, WMA,AAC, LPCM,DTS(DMP)， IMA-aDPCM/MS-A

AAC, LPCM,

DPCM,LBR(cook),

AC3, E-AC3, DTS

G711A/mu-law

MPEG1/2 (Layer 1，

Layer2，Layer3)

WMA pro

MP3, WMA,

WMA

Remark

Max Solution: 1920×1080 Max Data Rate: 40 Mbps

Max Solution: 640×480 Max Data Rate: 10 Mbps

Max Solution: 1920×1080 Max Data Rate: 40 Mbps

Sample Rate: 16KHz~48KHz BitRate: 32K~448Kbps BitRate: 128Kbps~320Kbps Sampling rate : 8KHz-48KHz BitRate: <768Kbps Sampling rate : ~96KHz

Sample Rate: 8K~48KHz Bit Rate: 24K~384Kbps

Max Resolution: 1920×8×1088×8

Max Resolution:

9600×6400

Max Resolution: 9600×6400

UMC Poland sp. z o.o.

Ostaszewo 57B, 87-148 Łysomice, Poland

Assembled in Europe

www.sharp.eu

SHA-MAN-0053

Sharp LC-32DHE4041K, LC-32CHE4041K User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual