Sharp LC-24LE440M Operation Manual

Download

Page 1

LC-24LE440M

LCD COLOUR TELEVISION

OPERATION MANUAL

Printed in Thailand

J3NC0101C_EN_Cover.indd 1J3NC0101C_EN_Cover.indd 1 5/27/2013 1:48:40 PM5/27/2013 1:48:40 PM

Page 2

Supplied accessories

Remote control unit

“AAA” size battery (g2)

Antenna adaptor

(For Philippine model only)

Operation manual Stand base

Screws (g 3)

M4g16mm

Contents

Page

Supplied accessories ..............................................1

Contents ...................................................................1

Dear SHARP customer ............................................2

Important Safety Precautions ................................2

Trademark ................................................................2

Attaching the stand .................................................3

Setting the TV ..........................................................3

Connecting external devices ..................................4

Remote control unit ................................................5

Part names ...............................................................6

Auto setup ................................................................7

Quick guide for Menu operation ............................7

Selecting the input source ......................................7

On-screen Language Selection............................. 8

Channel setup ......................................................... 8

Page

Programme Edit ...................................................... 8

Basic Operation ...................................................... 8

Teletext .................................................................... 9

Stereo reception in analogue cable TV

channel mode ....................................................... 10

Picture Format ...................................................... 10

Other convenience functions .............................. 11

Media Operation ................................................... 13

Media Browser ...................................................... 13

Playback ﬁ les ........................................................ 13

Operation Window ................................................ 14

Playable File Types ............................................... 14

Appendix ............................................................... 15

Speciﬁ cations ....................................................... 16

J3NC0101C_EN.indd 1J3NC0101C_EN.indd 1 5/27/2013 1:48:45 PM5/27/2013 1:48:45 PM

Page 3

Dear SHARP customer

Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product.

Important Safety Precautions

• Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a soft damp cloth to clean the product. Do not use liquid cleaners, aerosol cleaners or chemical cloth to clean it, as such materials may damage the product.

• Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement.

• Do not place vases or any other water-ﬁ lled containers on this product. The water may spill onto the product causing ﬁ re or electric shock.

• Stand — Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.

• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven ﬂ oor surface can cause the product to fall from the cart.

• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufﬁ cient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.

• The LCD panel used in this product is made of glass. Therefore, it can break when the product is struck forcefully or with a sharp object. If the LCD panel is broken, be careful not to be injured by broken glass.

• Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating products (including ampliﬁ ers).

• To prevent ﬁ re, never place any type of candle or naked ﬂ ames on the top or near the TV set.

• To prevent ﬁ re or shock hazard, do not place the AC power cord under the TV set or other heavy items.

• Do not place heavy objects on this product or stand on it. Doing so could cause injury if the product overturns. Take special care near children and pets.

• The LCD panel is a very high technology product with 1,049,088 pixels, giving you ﬁ ne picture details.

Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a ﬁ xed point of blue,

green or red. This is within product speciﬁ cations and does not constitute a fault.

• Do not display a still picture for a long time, as this could cause an after image to remain.

Precautions when transporting the TV

• When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always carry the TV by two people holding it with two hands — one hand on each side of the TV.

• Install the product on the place where the AC cord can be unplugged easily from the AC outlet.

Trademark

• The terms HDMI and HDMI High-Deﬁ nition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

J3NC0101C_EN.indd 2J3NC0101C_EN.indd 2 5/27/2013 1:48:45 PM5/27/2013 1:48:45 PM

Page 4

Attaching the stand

• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.

• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

Conﬁ rm the screws supplied with the TV.

Soft cushion

Screws (m3)

Attach the stand base, insert and tighten the 3 screws into the 3 holes on the bottom of the stand base.

NOTE

• To detach the stand, perform the steps in

reverse order.

Setting the TV

Connecting the antenna cable

To enjoy a clearer picture, use an outdoor antenna.

VHF/UHF antenna

300-ohm twinlead ﬂ at feeder (not supplied)

75-ohm impedance converter (not supplied)

75-ohm coaxial cable (round cable) (not supplied)

To antenna terminal

For Philippine model only

If your outdoor antenna uses a 75-ohm coaxial cable with a standard DIN45325 plug (IEC 169-2), plug it into the antenna jack at the rear of the set.

If your outdoor antenna uses a 75-ohm coaxial cable with F type plug, plug it into the antenna jack at the rear of the set via conversion plug.

CAUTION

• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE

AC CORD CONNECTED.

NOTE

• The method of connection differs depending on a type of wires for aerials that you use. Attach an optional

conversion plug (for the Philippines) compatible with the type of wires for arials that you use to the installation device. Make sure to power off the device for safety when you connect to a wire for aerials.

If your outdoor antenna uses a 300-ohm twin-lead ﬂ at feeder (F type), connect a 300-ohm to 75-ohm impedance converter and plug it into the antenna jack at the rear of the set. If you use M type plug, plug it into the antenna jack at the rear of the set directly.

Antenna adaptor

(supplied for Philippine only)

J3NC0101C_EN.indd 3J3NC0101C_EN.indd 3 5/27/2013 1:48:45 PM5/27/2013 1:48:45 PM

Page 5

Connecting external devices

You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD

player.

To view external source images, select the input source from INPUT SELECT

on the remote control unit or /

ENTER on the TV.

CAUTION

• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player or other external equipment.

• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.

Connecting a VCR, game console or camcorder

A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected using the composite terminals.

When using composite A/V cable (commercially available)

AUDIO

VIDEO

VCR/Game console/ Camcorder

Connecting a DVD player

You can use the Component/HDMI terminals when connecting to a DVD player and other audiovisual equipment.

When using HDMI-certiﬁ ed cable (commercially available)

When using component cable (commercially available)

(CB)

(CR)

DVD player

J3NC0101C_EN.indd 4J3NC0101C_EN.indd 4 5/27/2013 1:48:45 PM5/27/2013 1:48:45 PM

Page 6

Remote control unit

1a (POWER)

Enter standby mode or turn on the power

(info)

Display program position number

3 INPUT SELECT

Select an input source

4 PICTURE SIZE

Select picture format

5 0 – 9

Select channel Select Teletext page

6 AUDIO I/II

Select between the available broadcast audio

7 MEDIA

To enter Media Browser

Inserting the batteries

Before using the TV for the ﬁ rst time, insert two “AAA” size batteries (supplied). When the batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.

Open the battery cover.

Insert the two supplied “AAA” size batteries.

Close the battery cover.

•

Place batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.

CAUTION

• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, ﬁ re or the like.

• If the remote control will not be used for a long time, remove the batteries.

• Do not subject the remote control unit to shock. In addition, do not soak the remote control unit with liquids or place it

in an area with high humidity.

• Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the unit.

12 3 4

8 MENU

Activate the menu / In menu, return 1 step

9 RETURN

Exit menu / In Media browser, return 1 step

/b/c/d (Cursor)

Cursor buttons

11 ENTER/CH LIST

Memorize Channel List

¬ (MUTE) Turn the sound on/off

(TELETEXT)

Teletext ON / Text mix / OFF

(+/-)

Volume

FREEZE / 3 (HOLD)

Still picture Hold the text page

/ (SUBPAGE)

Switches between the present channel and the last selected channel Sub page selection

17 P (+/-)

Change the TV channel or Teletext page up or down

(Reveal hidden for TELETEXT)

Reveal quiz page answers

(Top/Bottom/Full)

Teletext enlargement

K/ L

Control buttons for USB-playback

Fastext/TOPtext buttons

J3NC0101C_EN.indd 5J3NC0101C_EN.indd 5 5/27/2013 1:48:46 PM5/27/2013 1:48:46 PM

Page 7

Part names

TV (Front)

Remote control sensor Power Indicator

POWER indicator

Lighted (Red) The TV is off (standby mode).

Lighted (Green) The TV is on.

TV (Rear/Location of controls)

5 6

1 /ENTER button 2 P (Channel)

/ / / buttons

(Volume) +/–/ / /MENU buttons

Press hold (Volume)

+/–

simultaneously about 1 second the menu will be appear.

(POWER) button

5 USB terminal* 6 HDMI Input terminal 7 COMPONENT/AV VIDEO Input

terminal

• Audio input alternative

8 ANT. (Antenna) input terminal 9 Bracket holes Fix a wall mounting

bracket (not supplied) here. Before wall-mounting, please check carefully the location of the TV’s mounting-holes.

USB terminal use for USB Media Player. (See page 13.)

• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.

J3NC0101C_EN.indd 6J3NC0101C_EN.indd 6 5/27/2013 1:48:46 PM5/27/2013 1:48:46 PM

Page 8

Auto setup

Your television has an Automatic Tuning System which makes tuning in your television easy. This Automatic Tuning System scans the entire reception range in your area and automatically stores all available analogue channels of suitable signal strength in the correct order.

Preparation:

Press

(POWER) on the unit or on the remote.

Auto Installation menu will appear. Press c/d to select desired language.

Then press ENTER.

< English >OSD Language

Please select an OSD Language.

Please press ENTER to

begin auto tuning.

Enter

ENTER

TV will search for TV-channels. Connect your antenna now. The tuning’s progress will be displayed in percent for conﬁ rmation.

Auto Tuning 66.50MHz Current CH: 1

NOTE

• Please be patient - the Auto Tuning process can take several minutes to complete.

When the display reads 100%, normal TV-screen will appear.

NOTE

• To cancel the auto tuning, press RETURN, then press c to select Yes during the process.

THE AUTOMATIC TUNING PROCESS WILL ONLY START BY ITSELF THE FIRST TIME YOU SWITCH THE SET ON.

• If you could not set up a correct language in this auto setup process, you will be able to make your preferred language selection as illustrated in page 8 (On-screen Language Selection).

Quick guide for Menu operation

Call Menu and for example: Select “Auto Tuning”.

Press INPUT SELECT. Select TV, then press ENTER. Press MENU.

Press c/d to select “Channel”, then press

or ENTER.

Channel

Auto Tuning ATV Manual Tuning Program Edit

> > >

Press a/b to select “Auto Tuning”, then press

or ENTER.

Channel

Auto Tuning

ATV Manual Tuning Program Edit

> > >

Press c/d to select “Yes” to conﬁ rm or choose the “No” to return to the menu screen.

... on the following pages the MENU can be called in the same way as here.

Press RETURN to exit the menu.

NOTE

• The Menu screen disappears automatically after a deﬁ ned period of time with “OSD Timer”. (see page 12)

Selecting the input source

Press INPUT SELECT to view a signal from another device connected to your TV, such as a VCR or DVD player. You can select each input source depending on which input jacks you used to connect your devices.

To select the video input source, press

a/b

, then

press ENTER.

J3NC0101C_EN.indd 7J3NC0101C_EN.indd 7 5/27/2013 1:48:47 PM5/27/2013 1:48:47 PM

Page 9

On-screen Language Selection

Press MENU (unless you have already selected when the set was ﬁ rst switched on). Then press

c/d

to select “Setup”, then press b or ENTER.

Setup

English

West

20 Sec

< < < >

> > >

OSD Language

TT Language OSD Timer Reset

Press a/b to select “OSD Language”, then press c/d to select the desired language.

Press RETURN to exit the menu.

Channel setup

Press MENU. Select “Channel/ATV Manual Tuning”, then press d or ENTER.

Press a/b to select desired item, then press

c/d

to setting.

Channel

NTSC

67.25MHz On

Off

< < < < <

> > > > >

Current CH:

Color System Sound System Search AFC

Fine-Tune

Skip

Current CH: Set the channel number. Color System: Select the color system. Colour

System has already been preset to automatic. Do not change anything here. Any changes can cause picture or sound disruption. Sound System: Select the sound system. The correct sound system is already installed. Any changes can cause sound disruption. Search: Press c to search down from the current frequency, and press d to search up.

AFC: Automatic Fine Tuning. Fine-Tune: Adjust the frequency of the channel ﬁ nely. Skip: Select “On” to skip the current channel when

you select the channel by pressing P+/P-.

Press RETURN to exit the menu.

Programme Edit

You can preset your favorite channel (Channel List). Press MENU. Select “Channel/Program Edit”, then press d or ENTER.

Program Edit

001

002 003 004 005 006 007 008 009 010

Rename Delete Move

011 012 013 014 015 016 017 018 019 020

021 022 023 024 025 026 027 028 029 030

Rename (red button): You can input or change the name of a channel on the cursor screen with a/b/c/

, ENTER and red buttons.

Delete (green button): Press green button to select

the desired channel, then you can delete channel when press red or ENTER buttons. Move (yellow button): Press a/b/c/d to select the position that you want to swap the channel with, then press red or ENTER buttons.

Basic Operation

Channel selection

With the Numbered buttons (0-9). Example:

• No. 2: Press 2.

• No. 29: Press 2 and within 2 seconds, press 9.

• No. 929: Press 9, 2, 9 same as above. Press P +/- to change up or down a channel. This takes approx. 2 seconds. If the auto search only stored 5 stations, only these 5 will appear. Skipped channels will not appear.

Channel List

The Channel List shows a list of all receivable programmes. Press CH LIST to display the Channel List. Press a/b/c/d to select the desired channel. Press CH LIST to display the selected channel.

NOTE

• To display the programmes on the channel list, it is necessary to input the programme name in “Program Edit” mode.

J3NC0101C_EN.indd 8J3NC0101C_EN.indd 8 5/27/2013 1:48:47 PM5/27/2013 1:48:47 PM

Page 10

Information display

Press . The program information will appear for approx. 5 seconds.

Quick View

button allows you to go back to the last selected TV channel. When you press

during external input mode, TV switches to the last channel. Also, when you press

during TV, you will not return to external input mode, but only switch channels between last channel and current channel.

MUTE

Press . The sound will be cut off. The MUTE can be released by pressing

again or

(Volume) + or -.

Still picture

Press FREEZE to make a still picture. To cancel the still picture, press FREEZE again.

NOTE

• The still picture function is available only for TV and AV-input

mode.

• During still picture mode, Aspect Ratio feature is not

available. (If you press PICTURE SIZE repeatedly, still picture mode will be canceled.)

NOTE

• During TV or external input mode, if there is no signal

reception, the TV will change to standby after approx. 15 minutes.

• Some functions are activated and de-activated with the

same key. Others require RETURN key for de-activating.

Teletext

Teletext is sent page by page. This unit is able to automatically store up to 899 pages, but they can only be accessed once they have been stored. This can take a few moments.

TT Language menu allows the installation of the teletext language.

The languages displayed are only those supported by the channel.

Fastext/TOPtext

The Fastext/TOPtext is teletext with a special directory. On the lower part of the screen there are four different coloured ﬁ elds (red, green, yellow and blue). These ﬁ elds lead directly to the pages shown within. The coloured buttons on the remote control correspond to the coloured ﬁ elds. Press the appropriate coloured button in order to activate the desired colour ﬁ eld.

Switch on / off Teletext

Teletext is not transmitted by all channels. Select a channel that shows teletext. Press

. You will now see a teletext page. (If “100” is shown without any text information, it may mean that the channel you have selected does not support teletext.) Press

again. Teletext and TV picture are shown simultaneously. Press

again in order to switch off teletext. Press

again in order to switch on teletext again. The last page which was stored is now shown.

NOTE

• You cannot select any other channels as long as teletext is

switched on. Switch teletext off when you want to switch over to another channel.

Select Page

Press P +/- until the page you desire appears. Or ... enter the requested page number by using the 10 Number Buttons. And if you mistype something, just enter the complete 3-digit wrong page number then enter the desired number again. Or ... press one of the coloured teletext buttons so that a page from Fastext/TOPtext is shown.

Hold Pages

Some pages are divided up into subpages by the channel. Subpages are automatically shown in turn, as they are transmitted. In order to hold the page, press

. Press

again in order to display the next subpage.

Directly Select Subpages

You can directly select the subpages if required. You may use one of two operations.

1. Press

in order to select subpage 2. 0 0 0 0

is shown. Enter 0 0 0 2. It can take a minute before subpage 0002 appears. Press

again in order

to switch off the subpage feature.

Or:

2. Wait a few seconds, and the right now available

subpages will be shown in the bottom line. Select your page with c/d.

Enlargement

In order to enlarge the display, press . Either the upper or lower half of the screen is enlarged. Each time you press

you switch between the display of the upper or lower half of the screen or the full picture.

Answering Quiz Questions

Some pages contain quiz questions with concealed answers. Press

in order to show the answers.

J3NC0101C_EN.indd 9J3NC0101C_EN.indd 9 5/27/2013 1:48:48 PM5/27/2013 1:48:48 PM

Page 11

Stereo reception in analogue cable TV channel mode

You can see the each signal type you selected on the TV-screen when you press

When 2-channel sound reception is available, you can select your preferred audio with the AUDIO I/II.

Each time you press AUDIO I/II, the sound channel will switch to the alternative channel available.

NOTE

• In case of bad reception, the stereo sound also can be disturbed.

• The sound multiplex displayed when

pressed is user selected sound. It may not the same one which is from the program being broadcasted

Picture Format

Picture Size

The required picture format can be set by pressing the PICTURE SIZE button. Press PICTURE SIZE until the required format is displayed. You move through the following formats when you press the button: 4:3, 16:9, Cinema, Real (HDMI mode

only).

Other formats

Press PICTURE SIZE until the desired size is reached.

4:3

The picture is displayed in 4:3 format with black bars to the right and left.

16:9

The width of the picture will be zoomed evenly.

Cinema

Use Cinema to increase a small 4:3 letterbox signal.

4:3 Letterbox picture increased to Cinema format.

Real (HDMI mode only)

All images are displayed on the TV screen of 16:9 ratio without overscanning.

Selectable picture mode

TV - 4:3, 16:9, Cinema AV - 4:3, 16:9, Cinema Component (SD) - 4:3, 16:9, Cinema Component (HD) - 4:3, 16:9 HDMI (SD) - 4:3, 16:9, Cinema, Real HDMI (HD) - 4:3, 16:9, Real Media - None

J3NC0101C_EN.indd 10J3NC0101C_EN.indd 10 5/27/2013 1:48:48 PM5/27/2013 1:48:48 PM

Page 12

You can change the default settings to convenience use.

Selected Items Setup hint

Picture

Picture Mode

Standard Standard picture quality (factory-set)

Mild Intended for bad-quality signals (factory-set)

Dynamic Enhanced picture contrast and sharpness (factory-set)

User Your personal preferences

Contrast / Brightness / Color / Tint / Sharpness You can adjust the picture to your preference.

• Tint is available in NTSC-signal mode or Component/HDMIsignal with 60Hz.

Color Temperature Cool (Bluish) / Medium (Neutral) / Warm (Reddish)

Noise Reduction Sometimes it is not possible to input a high-quality HD signal.

The actual signal input is too small and noisy, e.g. a video ﬁ lm in letterbox format, or a noisy analogue cable TV signal. This feature can slightly reduce interferences caused by the faulty input signal.

Off / Low / Middle / High

Backlight You can use the Backlight feature to adjust the screen

brightness for improved picture clarity.

Sound

Sound Mode You can change the sound mode setting.

Standard / Movie / Music / User

Bass / Treble / Balance You can adjust the sound quality to your preference.

Auto Volume This will automatically adjust volume so each channel and

input has the same average volume level.

On / Off

Surround The Surround-Sound feature processes the audio signal

to expand the listening ﬁ eld wider and deeper to create a ‘pseudo surround-sound’ from the TV’s speakers. The feature works with stereo signals from TV broadcast or AV input.

On / Off

Other convenience functions

J3NC0101C_EN.indd 11J3NC0101C_EN.indd 11 5/27/2013 1:48:48 PM5/27/2013 1:48:48 PM

Page 13

Selected Items Setup hint

Setup

OSD Language See page 8.

TT Language See page 9.

OSD Timer OSD is cleared automatically as per this setting.

• “INPUT SELECT/ (info)” OSD will disappear after 5

seconds in spite of this setting.

• The OSD which is linked with the OSD Timer setup is

limited to the OSDs for the overall Menu and the Input Select.

5/10/15/20/25/30 Sec

Reset Press

or ENTER to enter the Reset to default screen.

Press to select “Yes”. Reset the TV function will now begin.

• When you proceed the Reset function and all item in the

Picture, Sound, Setup, Feature will back to factory value. At this time, TV channel preset will not reset.

Feature

Sleep Timer Sleep Timer switches the TV to standby after a deﬁ ned period

of time. To cancel the Sleep Timer, set to “Off”.

Off/15/30/45/60/75/90/105/120 Min

Aspect Ratio See page 10.

Blue Screen On: You can set the TV to automatically change to a blue

screen and mute the sound if the signal is weak or absent.

On / Off

Channel See page 7, 8.

Other convenience functions (Continued)

J3NC0101C_EN.indd 12J3NC0101C_EN.indd 12 5/27/2013 1:48:48 PM5/27/2013 1:48:48 PM

Page 14

Media Operation

You can enjoy viewing pictures and playing music ﬁ les from your USB storage device. (see page 6)

Connect the USB storage device into the Media Input terminal.

Press MEDIA to display the Media Menu.

NOTE

• Do not disconnect a USB storage device while it is being accessed. Doing so can damage the device or the ﬁ les stored on the device. You can safely connect or disconnect the USB storage device when the TV is not in MEDIA mode.

• Back up all the data in the USB storage device in case if data was lost due to unexpected accident. We do not assume any liability for the losses by misuse or malfunction.

• Not all USB storage devices are compatible with this TV.

• The character that exceeds the display area is not displayed.

• Do not use USB extension cable.

Media Browser

Media Selection

Drive

Connect.

Drive C: Drive D: Drive E: Drive F:

Exist None None None

File Selection

Music

Normal Repeat None 320 Kbps 44100 Hz 00:00:00/00:03:18

Date: Time: Size:

2012/09/09

22:30:11 7904 KB

C:\Music\

..

001_Music1

002_Music2 003_Music3 004_Music4 005_Music5 006_Music6 007_Music7 008_Music8 009_Music9

NOTE

• The content will change in accordance with each media setting screen.

Information window

Playback ﬁ les

Press

a/b

to select the desired Drive and

press

ENTER.

Press c/d to select the Media (Photo or Music) Menu and press b.

Press a/b to select desired folder and press ENTER to open the folder; or press a/b to select desired ﬁ le and press ENTER to start playback.

You can playback the files with the following remote control buttons.

Buttons

Action

c / d/

a/b

Press to rotate the picture. Press to select ﬁ le.

ENTER

Press to start the playback. Press to open the folder.

▶

▌▌

Press to start the playback or slideshow. Press to pause the playback.

■

Press to stop the playback.

During the playback, press to select the next ﬁ le.

During the playback, press to select the previous ﬁ le.

During the playback, press to search forward.

During the playback, press to search backward.

RETURN

Press to return 1 step.

Press to turn the sound on/off.

PICTURE

SIZE

Press to zoom the picture.

J3NC0101C_EN.indd 13J3NC0101C_EN.indd 13 5/27/2013 1:48:48 PM5/27/2013 1:48:48 PM

Page 15

Operation Window

Press ENTER during playback the ﬁ le. Operation window will appear.

Press c / d to select the desired command, then press ENTER to execute.

Details of operation commands

Icon Operation

▌▌

▶

Pause/Playback

Skip ﬁ le to forward or reverse direction.

■

Stop.

Repeat playback. Press ENTER repeatedly to select desired repeat option.

Fast Forward / Review playback.

Press ¬ (MUTE) on the remote.

EQ Select sound type.

Playable File Types

Photo

File Type

Extension

Name

Detail Spec

JPEG .jpg, .jpeg

Max Resolution: 15360×8640 (Baseline), 1024x768 (Progressive)

Music

File Type

Extension

Name

Detail Spec

MP3 .mp3

Sample Rate: 32K~48KHz Bit Rate: 32K~320Kbps

File System

Standard

Hi Speed FS, FAT32, FAT16, NTFS (NTFS compressed ﬁ le is not supported)

J3NC0101C_EN.indd 14J3NC0101C_EN.indd 14 5/27/2013 1:48:49 PM5/27/2013 1:48:49 PM

Page 16

Appendix

Troubleshooting

The problems described below are not always caused by malfunctions. Check the TV again before having the TV serviced.

Problem Possible Solution

• No power.

• When the a (POWER) switch does not work, remove the power plug and insert it again, and then press a (POWER) on the TV after waiting for more than ﬁ ve seconds.

• Is the AC cord disconnected?

• Has the power been turned on? (See page 6.)

• Unit cannot be operated. • External inﬂ uences such as lightning, static electricity, etc., may cause improper operation. In this case, operate the unit after ﬁ rst turning the power off the TV or unplugging the AC cord and re-plugging it in after 1 or 2 minutes.

• Remote control unit does not

operate.

• Are batteries inserted with polarity (+, –) aligned? (See page 5.)

• Are batteries worn out? (Replace with new batteries.)

• Are you using it under strong or ﬂ uorescent lighting?

• Is a ﬂ uorescent light shining on the remote control sensor?

• Picture is cut off. • Are screen mode adjustments such as picture size made correctly? (See page 10.)

• Strange colour, light colour, or

dark, or colour misalignment.

• Adjust the picture tone. (See page 11.)

• Is the room too bright? The picture may look dark in a room that is too bright.

• Check the colour system setting. (See page 8.)

• Power is suddenly turned off. • The unit’s internal temperature has increased.

• Remove any objects blocking the vent or clean.

• Is the sleep timer set? (See page 12.)

• No picture. • Is the connection to external equipment correct? (See page 4.)

• Is the Picture Mode adjustment correct? (See page 11.)

• Is the antenna connected properly? (See page 3.)

• No sound. • Is the volume too low? (See page 5.)

• The TV sometimes makes a

cracking sound.

• This is not a malfunction. This happens when the cabinet slightly expands and contracts according to changes in temperature. This does not affect the TV’s performance.

Cautions regarding use in high and low temperature environments

• When the unit is used in a low temperature space (e.g. room, ofﬁ ce), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.

Storage temperature: f20°C to e60°C.

J3NC0101C_EN.indd 15J3NC0101C_EN.indd 15 5/27/2013 1:48:49 PM5/27/2013 1:48:49 PM

Page 17

Speciﬁ cations

Item Model LC-24LE440M

LCD panel with LED backlight 23.6" (599.4 mm) Advanced Super View & BLACK TFT LCD

Resolution 1,049,088 pixels

(1366 g 768)

Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60

TV Function

TV-Standard PAL: B/G, D/K, I SECAM: B/G, D/K NTSC3.58:M

Receiving Channel

VHF/UHF 44.25 — 863.25 MHz

TV-Tuning System Auto Preset 199 ch

STEREO/BILINGUAL NICAM/A2 Dual/US stereo

Audio ampliﬁ er

5 W g 2

Terminals

Antenna

UHF/VHF 75

AV VIDEO RCA pin(AV input)

COMPONENT

Y :Composite Input , Pb,Pr:RCAg2 (Audio Input 1 Alternative)

HDMI HDMI in with HDCP

USB USB for multimedia player function (Photo and Music)

OSD language

English/French/Portuguese/Arabic/Persian/Simpliﬁ ed Chinese/Thai/Vietnamese/Indonesian/Russian/ Malay/Spanish

Power Requirement AC 110 — 240 V, 50/60 Hz

Power Consumption 39 W (1 W Standby)

Dimensions

without stand (mm)

550.0 (W) g 337.5 (H) g 58.0 (D)

with stand (mm)

550.0 (W) g 361.0 (H) g 136.9 (D)

Weight without stand (with stand) 3.6 kg (3.8 kg)

Operating Temperature 0°C — +40°C

• As a part of policy of continuous improvement, SHARP reserves the right to make design and speciﬁ cation changes for product improvement without prior notice. The performance speciﬁ cation ﬁ gures indicated are nominal values of production units. There may be some deviations from these values in individual units.

CAUTION

• Installing the Liquid Crystal Television requires special skill that should only be performed by qualiﬁ ed service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

• Carefully read the instructions that come with the bracket before beginning work.

• The TV screen may fail to display component input signals from the following source equipment:

- Source equipment that intermix NTSC and PAL formats.

- Output from an old VHS deck.

- Devices such as old game consoles with signal outputs other than NTSC/PAL format. This product does not support the direct input of the aforementioned source equipment. When connecting the above mentioned source equipment, run the equipment’s signal output through correction devices such as a Time Base Corrector (TBC) or Frame Synchronizer (FS).

J3NC0101C_EN.indd 16J3NC0101C_EN.indd 16 5/27/2013 1:48:49 PM5/27/2013 1:48:49 PM

Page 18

Unit:mm

J3NC0101C_EN.indd 17J3NC0101C_EN.indd 17 5/27/2013 1:48:49 PM5/27/2013 1:48:49 PM

Page 19

J3NC0101C SH 13/05

J3NC0101C_EN_Cover.indd 3J3NC0101C_EN_Cover.indd 3 5/27/2013 1:48:40 PM5/27/2013 1:48:40 PM