* The URL and contents are subject to change without
prior notice.
z
The screens and illustrations in this manual are shown as
examples. The actual screens and illustrations may differ.
z
Key illustrations in this manual differ from the actual design of
the keys.
z
The explanations in this manual are based on the case for the
handset color "Black".
z
Note that "SH-01J" is referred to as "handset" in this manual.
z
This manual refers to microSD Card or microSDHC Card as
"microSD Card" or "microSD".
z
Reproduction of this manual in part or in whole without prior
permission is prohibited.
z
The contents of this manual are subject to change without
prior notice.
z
▶[Tools]▶[Instruction
)
Basic package
SH-01J (includes warranty)
Back Cover SH76Battery Pack SH44
Quick Start Guide
Desktop Holder SH49
(in Japanese only)
z
For optional parts (sold separately) compatible with the handset,
refer to the DOCOMO website.
(
https://www.nttdocomo.co.jp/product/option/) (in Japanese only)
Precautions (ALWAYS FOLLOW
THESE DIRECTIONS)
z
Before use, read these Precautions carefully and use your
handset properly.
Keep this manual in a safe place for future reference.
z
These precautions contain information intended to prevent bodily
injury to the user and to surrounding people, as well as damage
to property, and must be observed at all times.
The following symbols indicate the different degrees of injury
or damage that may occur if information provided is not
observed and the handset is used improperly.
This symbol indicates that
death or serious bodily injury
Danger
Warning
Caution
The following symbols indicate specific directions.
Indicates a prohibited action.
Indicates not to disassemble the device.
Indicates not to use the device near water or
get it wet.
Indicates not to handle the device with wet
hands.
Indicates that instructions specified are
compulsory (must be followed).
Indicates that the power cord must be
unplugged from the outlet.
may directly and immediately
result from improper use.
This symbol indicates that
death or serious bodily injury
may result from improper use.
This symbol indicates that
minor injury and/or property
damage may result from
improper use.
Handling the handset, adapters, docomo
nano UIM card and TV antenna cable
(general)
Danger
Do not use, store or leave the equipment in
locations subject to high temperatures or
accumulation of heat (near a fire or heating unit, in
a kotatsu or bedding, under direct sunlight, inside
a vehicle on a hot day, etc.).
May cause fires, burns, bodily injury, electric shock, etc.
Do not place the equipment inside cooking
appliances such as microwave ovens and
induction cookers or high pressure vessels such
as pressure cookers, or near them.
May cause fires, burns, bodily injury, electric shock, etc.
Do not sprinkle sand, soil or dirt on the equipment
or put the equipment directly on it.
May cause fires, burns, bodily injury, electric shock, etc.
Refer to the following for details on waterproofness/
dustproofness.
P.XX Waterproof/Dustproof
☞
Do not charge the equipment while it is wet with
liquids such as water (drinking water, sweat,
seawater, pet urine,etc.).
May cause fires, burns, bodily injury, electric shock, etc.
Refer to the following for details on waterproofness.
P.XX Waterproof/Dustproof
☞
Do not attempt to disassemble or modify the
equipment.
May cause fires, burns, bodily injury, electric shock, etc.
Do not get the equipment wet with liquids such as
water (drinking water, sweat, seawater, pet urine,
etc.).
May cause fires, burns, bodily injury, electric shock, etc.
Refer to the following for details on waterproofness.
P.XX Waterproof/Dustproof
☞
Do not allow liquids such as water (drinking water,
sweat, seawater, pet urine, etc.) to get inside the
charger terminal or external connector terminal.
May cause fires, burns, bodily injury, electric shock, etc.
Refer to the following for details on waterproofness.
P.XX Waterproof/Dustproof
☞
Use only optional parts specified by NTT DOCOMO.
May cause fires, burns, bodily injury, electric shock, etc.
Precautions is explained in the following six sections.
z
Handling the handset, adapters, docomo nano UIM card and TV
Handling near electronic medical equipment ..............P. 6
z
Material list . ......................................P. 7
Warning
Do not subject the equipment to strong force,
impacts or vibration such as letting it fall, stepping
on it or throwing it.
May cause fires, burns, bodily injury, electric shock, etc.
6
3
Do not allow conductive materials (such as metal
objects and pencil lead) to come into contact with
the charger terminal or external connector terminal
or dust to get inside it.
May cause fires, burns, bodily injury, electric shock, etc.
Do not cover or wrap the equipment with bedding
etc. when using or charging.
May cause fires, burns, etc.
Contents/Precautions
If charging is not completed after the specified
charging time, stop charging.
May cause fires, burns, bodily injury, etc. because of
overcharging.
Be sure to turn off the handset and not to charge
the battery in locations where flammable gas may
be generated such as gas stations and where dust
is generated.
May cause explosions, fires etc. if using the equipment in
location where flammable gas etc. is generated.
To use Osaifu-Keitai in locations such as gas stations, be
sure to turn off the power in advance (If NFC/Osaifu-Keitai
lock is set, disable the lock before turning off the power).
If any trouble such as an unusual odor, unusual
noise, smoking, overheating, discoloration or
deformation is found during use, charge or
storage, follow the instructions below.
z
Unplug the power plug from the outlet or
cigarette lighter socket.
z
Turn off the handset.
May cause fires, burns, bodily injury, electric shock, etc. if
you do not follow the instructions above.
Caution
Do not use a damaged equipment.
May cause fires, burns, bodily injury, etc.
Handling the handset
Danger
Do not throw the handset into a fire or heat it.
May cause fires, burns, bodily injury, etc. because of
catching fire, exploding, overheating or leaking of the
battery.
Do not apply excessive force on the handset such
as puncturing it with a nail (sharp object), hitting it
with a hammer (hard object) or stepping on it.
May cause fires, burns, bodily injury, etc. because of
catching fire, exploding, overheating or leaking of the
battery.
If the substance etc. inside the internal battery
comes into contact with your eyes, do not rub your
eyes but immediately rinse your eyes with clean
water. Then seek prompt medical treatment.
May result in loss of eyesight etc. because of the substance
etc. inside the internal battery.
If the substance etc. inside the display comes into
contact with your eyes or mouth, immediately rinse
the contacted area with clean water. Then seek
prompt medical treatment.
May result in loss of eyesight, sick, etc. because of the
substance etc. inside the display.
Do not leave the equipment on unstable surfaces,
such as on a wobbly table or sloped surface. Be
very careful while the vibrator is set.
May fall and cause injury etc.
Do not use or store the equipment in locations that
are subject to humidity, dust or high temperatures.
May cause fires, burns, electric shock, etc.
Refer to the following for details on waterproofness/
dustproofness.
P.XX Waterproof/Dustproof
☞
If being used by a child, have a guardian teach him/
her the proper handling procedures and do not
have him/her use it improperly.
May result in bodily injury etc.
Do not place the equipment where the young
children can reach it.
A young child may swallow the equipment, or suffer bodily
injury, electric shock, etc.
Be careful when using the handset continuously
for a long time or charging because it may become
warm. Also, be careful not to touch it
unintentionally for a long time when you fall asleep
etc.
The handset or adapter may become warm when using an
app, a call, data communication, watching TV or video, etc.
for a long time or charging.
Directly touching a warmed part for a long time may cause
redness, itching, rashes, low-temperature burns, etc. on
your skin depending on your constitution or health condition.
Warning
Do not illuminate or emit the mobile light at anyone
driving a car or other vehicles.
May prevent a driver from driving safely and cause a traffic
accident etc.
Do not watch the screen which is flashing
repeatedly for a long time.
May cause spasm or loss of consciousness.
Do not allow water or other liquids (drinking water,
sweat, seawater, pet urine, etc.), metal, flammable
material or other foreign object to enter the
docomo nano UIM card slot or microSD Card slot
on the handset.
Also, do not insert the docomo nano UIM card or
microSD Card in the wrong place or wrong side.
May cause fires, burns, bodily injury, electric shock, etc.
Do not expose the camera lens to direct sunlight
etc. for a long time.
May cause fires, burns, bodily injury etc. because of
condensing action of the lens.
Turn off the handset or set it to Airplane mode
before going aboard an airplane.
Since using the handset on airplanes is restricted, follow
the instructions given by the respective airlines.
May interfere with the operation of electronic devices
installed on the airplane.
If you commit a prohibited act while using the handset on
an airplane, you may be punished by law.
Follow the instructions given by the respective
medical facility regarding the use of the handset in
a hospital.
Turn off the handset in areas where the use of mobile
phones is prohibited.
May interfere with the operation of electronic devices and
electronic medical equipment.
4
Contents/Precautions
Keep the handset away from the ears during a call
in which hands-free is set, while the ringtone is
ringing, during stand-by, etc.
When you attach the earphone/microphone etc. to
the handset to play games, video/music, etc., do
not make the volume too loud.
Excessively high volume or using the handset continuously
for a long time may damage your hearing etc.
Also, it may prevent you from hearing ambient sounds and
cause an accident.
If you have a weak heart, take extra precautions
when setting functions such as the vibrator and
ringtone volume for incoming calls.
May have harmful effects on your heart.
If you are using electronic medical equipment etc.,
contact the respective manufacturer or dealer to
check whether the operation of the equipment is
affected by signals.
May interfere with the operation of electronic medical
equipment etc.
Turn off the handset near high-precision electronic
devices or devices that use weak electronic
signals.
May interfere with the operation of electronic devices.
※ Take particular care with the following devices
Hearing aids, implanted cardiac pacemakers, implanted
cardioverter-defibrillators, other electronic medical
equipment, other equipment controlled by electronic
signals,
etc. If you use an implanted cardiac pacemaker, implanted
cardioverter-defibrillator or other electronic medical
equipment, contact the respective manufacturer or dealer to
check whether the operation of the equipment is affected by
signals.
If the display part or camera lens is damaged, be
careful of broken glass and the exposed inside of
the handset.
May cause burns, bodily injury, electric shock, etc. if you
touch the broken or exposed parts.
If the internal battery leaks or emits an unusual
odor, immediately stop using the handset and
move it away from any naked flames or fire.
The battery fluid is flammable and could ignite, causing a
fire, explosion, etc.
Do not allow a pet etc. to bite the handset.
May cause fires, burns, bodily injury, etc. because of
catching fire, exploding, overheating or leaking of the
internal battery.
If the display is broken and the internal substance
etc. then leaks, do not get it on your skin (face,
hands, etc.), clothes, etc.
May result in loss of eyesight or harm to your skin etc.
If the internal substance etc. comes into contact with your
eyes, mouth, skin or clothes, immediately rinse the
contacted area with clean water.
Also, if it comes into contact with your eyes or mouth, seek
medical treatment immediately after rinsing the contacted
area.
Do not dispose of the handset in ordinary garbage.
May cause fires, burns, bodily injury, etc. because of
catching fire. Also, may damage to the environment. Tape
over the terminals of used batteries to insulate them and
then take them to a docomo Shop or other collection spot,
or follow local regulations on collection.
If the substance etc. inside the internal battery
leaks, do not get the liquid on your skin (face,
hands, etc.).
May result in loss of eyesight, damage to your skin etc.
If the internal substance etc. comes into contact with your
eyes, mouth, skin or clothes, immediately rinse the
contacted area with clean water.
Also, if it comes into contact with your eyes or mouth, seek
medical treatment immediately after rinsing the contacted
area.
If you use the handset in a vehicle, contact the
vehicle manufacturer or dealer to check whether
the operation of the vehicle is affected by signals.
May interfere with the operation of electronic equipment in
some vehicle models. In this case, stop using the handset.
If any trouble on your skin is occurs due to using
the handset, immediately stop using it and seek
medical treatment. Use of the handset may cause
itching, rashes, eczema, etc. depending on your
constitution or health condition.
For details on materials of each part ☞P.XX Material list
Make sure that there is no metal (a blade of cutter,
staple, etc.) on the handset because the earpiece
section, speaker section and back camera section
contain parts that generate magnetic waves.
May cause bodily injury etc. because of the adhered object.
Look at the display in a well-lit place, keeping a
certain distance.
Eyesight may be weakened etc. if you lock at it in a dark
place or closely.
Handling adapters
Caution
Do not swing the handset by its strap etc.
May hit you or others around you, resulting in an accident
such as bodily injury.
For using a motion sensor and geomagnetic
sensor, check the safety around, hold the handset
and do not swing it more than necessary.
May cause an accident such as bodily injury.
Warning
Do not use if the cord of the adapter is damaged.
May cause fires, burns, electric shock, etc.
Never use the adapter in humid locations such as a
bathroom.
May cause fires, burns, electric shock, etc.
The DC adapter should only be used in negative
grounded vehicles. Never use it in positive
grounded vehicles.
May cause fires, burns, electric shock, etc.
Do not touch adapters if you hear thunder.
May cause electric shock etc.
5
Contents/Precautions
Do not short-circuit the charger terminal when
connected to an outlet or cigarette lighter socket.
Also, do not allow any part of your body (hands,
fingers, etc.) to come into contact with the charger
terminal.
May cause fires, burns, electric shock, etc.
Do not place heavy objects on the cord of the
adapter or apply excessive force on it such as
pulling the cord of the adapter.
May cause fires, burns, electric shock, etc.
When plugging/unplugging an AC adapter into/
from the outlet, do not allow metallic straps or
other metallic objects to come into contact with the
prongs of the plug.
May cause fires, burns, electric shock, etc.
Do not connect the voltage converter for overseas
travel (travel converter) to the AC adapter.
May catch fire, or cause overheat, electric shock, etc.
Do not apply excessive force on the connection
part with the adapter connected to the handset.
May cause fires, burns, bodily injury, electric shock, etc.
Do not handle the cord, charger terminal or power
plug of the adapter with wet hands.
May cause fires, burns, electric shock, etc.
Unplug the power plug of the adapter from the
outlet or cigarette lighter socket when not using.
May cause fires, burns, bodily injury, electric shock, etc. if
you leave the power plug with plugging to the outlet or
cigarette lighter socket.
If water or other liquids (drinking water, sweat,
seawater, pet urine, etc.) enter the equipment,
immediately remove the power plug from the outlet
or cigarette lighter socket.
May cause fires, burns, electric shock, etc.
Always unplug the power plug from the outlet or
cigarette lighter socket before cleaning the
equipment.
May cause fires, burns, electric shock, etc. if you do not
unplug it.
Caution
Do not touch the adapter for a long time when
connected to an outlet or cigarette lighter socket.
May cause burns etc.
Handling docomo nano UIM card
Always use the specified power supply and
voltage. When using overseas, use the AC adapter
that is available overseas.
Using the incorrect power supply and voltage may cause
fires, burns, electric shock, etc.
AC adapter: 100V AC (Connect only with a household AC
outlet)
AC adapter available overseas: 100 to 240V AC (Connect
only with a household AC outlet)
DC adapter: 12/24V DC (for negative grounded vehicles only)
If you replace the fuse in the DC adapter, always
replace it with a specified fuse.
May cause fires, burns, electric shock, etc. if you use the
fuse other than specified one. Refer to the respective
manuals for information on specified fuses.
Wipe off any dust on the power plug.
May cause fires, burns, electric shock, etc. if you use the
power plug with dust adhering.
Fully plug the adapter into the outlet or cigarette
lighter socket.
May cause fires, burns, electric shock, etc. if you do not
insert the adapter securely.
Always grasp the adapters when unplugging the
power plug from the outlet or cigarette lighter
socket. Do not apply excessive force on it such as
pulling the cord of the adapter.
May cause fires, burns, electric shock, etc. since the cord of
the adapter is damaged by pulling it.
When plugging/unplugging an adapter into/from
the handset, plug/unplug the adapter straightly
toward the terminal to connect, not applying
excessive force on it such as pulling the cord.
May cause fires, burns, bodily injury, electric shock, etc. if
you do not plug/unplug the adapter correctly.
If the charger terminal is deformed such as bending
it, immediately stop using. Also, do not use the
deformed one by returning it to the original shape.
May cause fires, burns, bodily injury, electric shock, etc.
because of short circuit of the charger terminal.
Caution
Be careful with the cutting surface not to injure any
part of your body such as fingers when handling
the docomo nano UIM card.
May cause bodily injury etc.
Handling near electronic medical equipment
Warning
If you have electronic medical equipment such as
an implanted cardiac pacemaker or an implanted
cardioverter-defibrillator, always carry or use your
handset at least 15 cm away from your implant.
Electromagnetic signals may have harmful effects on the
operation of the electronic medical equipment.
Patients receiving medical treatment away from a
medical facility (e.g. home treatment) who are
using electronic medical equipment other than
implanted cardiac pacemakers or implanted
cardioverter-defibrillators should consult the
respective manufacturers etc. for information
regarding the effects of signals on the equipment.
Electromagnetic signals may have harmful effects on the
operation of the electronic medical equipment.
If there is any chance that the distance between the
handset and a person closest to you may get
shorter than 15 cm such as when you cannot freely
move around, set the handset not to emit radio
wave in advance (by setting Airplane mode, turning
the power off, etc.).
Somebody nearby may be equipped with electronic medical
equipment such as an implanted cardiac pacemaker or an
implanted cardioverter-defibrillator. Electromagnetic signals
may have harmful effects on the operation of the electronic
medical equipment.
6
Contents/Precautions
Material list
Handset
PartMaterial/Surface treatment
Main display
side
Sub display
side
Side surface of
main display
side
Side surface of
Surface of
the handset
Camera panelPC, PMMA resin/Hard coating
Operation key (including
PC+ABS-GF20 resin/UV coatin
Polyamide resin with glass/UV
coating
ABS resin/UV coating
UV cured resin
PC resin
Aluminum/Anodizing
SS
PC+ABS-GF20 resin
PA4T
Back Cover SH76
PartMaterial/Surface treatment
Back coverPC+ABS-GF20 resin/UV coating
GasketEPDM/Low friction coating
Battery Pack SH44
PartMaterial/Surface treatment
Battery packPC resin
Terminal sectionCopper alloy/Gold plating
Water wet determination sealHigh quality paper/PET
LabelPET/mat varnish paper
Desktop Holder SH49
Part材質/表面処理
Desktop holder (top case/
bottom case)
g
Terminal leverPOM resin
Lock leverPOM resin
Charging terminalPhosphor bronze/Gold plating
Metal section of connecting
terminal
Screw
Rubber baseFoamed urethane
Production lot labelPolyester film
ABS resin/Grain finish
SUS
Carbon steel for cold heading/
Trivalent black chromate
Handling precautions
General notes
z
SH-01J is waterproof, however, do not allow water to get
inside the handset and do not allow accessories or optional
parts to get wet.
The battery pack, adapter, desktop holder and docomo nano
UIM card are not waterproof. Do not use in humid or steamy
areas such as bathrooms and avoid exposing to rain and other
forms of moisture. If they are carried close to the skin,
perspiration may cause internal components to corrode and
result in malfunction. Note that if a problem is found to be due to
moisture, the handset and parts are not covered by warranty
and in some cases may be irreparable. Even when repairs are
possible, repair charges will be incurred, since the damage is
not covered by warranty.
z
Clean only with a soft and dry cloth (such as the type used
for eyeglasses).
y
Forceful rubbing of the display with a dry cloth etc. may
scratch its surface.
y
Water drops, dirt, etc. left on the display may cause stains to
form on its surface.
y
Never use chemicals such as alcohol, thinners, benzene or
detergents, as these agents may erase the printing or cause
discoloration.
z
Occasionally clean terminals with a dry cotton swab etc.
Dirty terminals may result in poor connections and loss of power
or insufficient battery charge. Keep the terminals clean with a
dry cotton swab etc.
Be careful with the terminals while cleaning them.
7
Contents/Precautions
z
Do not place the equipment near an air conditioning vent.
Condensation formed due to rapid changes in temperature may
cause internal corrosion and lead to a malfunction.
z
Do not apply excessive force on the handset, battery pack,
etc. when using it.
Carrying the equipment in a tightly packed bag or sitting on it put
in your pocket may cause damage to the display, internal
components, battery pack, etc. or result in a malfunction.
eeping an external connector device plugged into the external
K
connector terminal may cause damage or a malfunction.
z
Do not rub or scratch the display with metal etc.
May scratch it and cause a malfunction or damage.
z
Read the respective users guides supplied with supported
optional parts carefully.
z
The battery life depends on the usage and deterioration of
the battery pack.
z
Depending on usage, the battery pack may swell as it
approaches the end of its service life but this will not cause
problems.
z
Avoid the following situations when the battery pack is
stored.
Storage with the battery fully charged (immediately after
charging is completed)
Storage with no battery level (cannot turn the handset on)
May lower the performance or shorten the usable life of the
battery pack.
Approximately 40% is recommended as the proper battery level
for storage.
Notes about the handset
z
Avoid using the handset in extremely high or low
temperatures.
Use the handset within the range of a temperature between 5℃
and 35℃ and a humidity between 45% and 85%.
z
Using the handset close to land-line phones, TVs, radios,
etc. may have harmful effects on the operation of such
equipment. Move as far away as possible from such items
before use.
z
Keep a separate memo noting information stored on the
handset.
DOCOMO shall not be liable for any loss of content.
z
Do not drop or otherwise subject the handset to severe
impact.
May cause a malfunction or damage.
z
When connecting an external connector device to the
external connector terminal, do not put it in obliquely and
do not pull it while it is plugged in.
May cause a malfunction or damage.
z
Do not close the handset on strap, etc.
May cause a malfunction or damage.
z
The handset becomes warm during use or charging but this
s not a malfunction.
i
z
Do not leave the camera in direct sunlight.
May cause discoloration or burn-in of pixels.
z
Do not use the handset without the back cover.
May detach the battery pack or cause malfunction or damage.
z
Do not cover the surface of the display or keys with an
extremely thick sticker.
May cause a malfunction, damage or error.
z
Do not turn off the handset when microSD card is used.
May cause data loss or a malfunction.
z
Never place a magnetic card near the handset or pinch it.
The stored magnetic data in cash cards, credit cards, telephone
cards, floppy disks, etc. may be erased.
z
Never place magnetized items near the handset.
Putting highly magnetized items closer may cause an error.
z
The surface of the handset uses the aluminum material.
Note that dent and abrasion are easily remained as
aluminum is a soft material.
Notes about battery pack
z
Battery pack is a consumable product.
Though the battery life varies with use, change the battery pack
if the battery life is extremely short even after being fully
charged. Purchase a specified new battery pack.
z
Charge battery in areas where ambient temperature is
between 5℃ and 35℃ .
Notes about adapters
z
Charge battery in areas where ambient temperature is
between 5℃ and 35℃ .
z
Do not charge the battery in the following locations.
Areas with high humidity or dust, or in areas exposed to
frequent vibrations
Close to land-line phones, TVs, radios, etc.
z
Adapters may become warm during charging but this is not
a malfunction.
z
Do not use the DC adapter to charge the battery when the
car engine is not running.
May cause the car battery to run down.
z
When using an outlet with a feature to prevent the plug from
being removed accidentally, follow the instructions in the
outlet user's guide.
z
Do not subject to strong impacts. Also, do not deform the
charger terminals.
May cause malfunction.
Notes about docomo nano UIM card
z
Do not apply unnecessary force when inserting/removing
the docomo nano UIM card.
z
Customer is responsible for malfunctions arising from
inserting docomo nano UIM card into a different IC card
reader/writer etc.
z
Always keep IC area clean.
z
Clean only with a soft and dry cloth (such as the type used
for eyeglasses).
z
Keep a separate memo and note information stored on the
docomo nano UIM card.
DOCOMO shall not be liable for any loss of content.
z
To protect the environment, please take any unneeded
docomo nano UIM cards to a sales outlet such as a docomo
Shop.
z
Do not damage, touch haphazardly or short-circuit the IC.
May cause data loss or a malfunction.
z
Do not drop or otherwise subject the docomo nano UIM
card to severe impact.
May cause malfunction.
z
Never bend the docomo nano UIM card or place heavy
objects on it.
May cause malfunction.
z
Do not insert the docomo nano UIM card to the handset with
a label, sticker, etc. attached on the card.
May cause malfunction.
8
Contents/Precautions
Notes on using Bluetooth function
z
The handset supports the security function that meets the
Bluetooth specification for security during communication
using Bluetooth functions. However, the security may not
be sufficient depending on the configuration etc. Take care
of the security while making communication using
Bluetooth function.
z
Even if any leak of data or information occurs while making
communication using Bluetooth function, DOCOMO shall
not be liable for any loss of content.
z
Radio frequencies
The radio frequencies the Bluetooth function of the handset
uses are as follows.
①②③ ④⑤
⑥
① 2.4: This radio equipment uses the 2,400 MHz band.
② FH: The modulation system is the FH-SS system.
③ 1: The estimated coverage distance is 10 m or less.
④ XX: Another modulation system is used.
⑤ 4: The estimated coverage distance is 40m or less.
⑥
2,483.5 MHz are used and the frequencies for mobile object
identifiers cannot be avoided.
z
Cautions on using Bluetooth devices
Bluetooth operates at radio frequencies assigned to the
inhouse radio stations for a mobile object identifier that
have to be licensed and are used in production lines of a
factory, specific unlicensed low power radio stations, and
mateur radio stations (hereafter, referred to as "another
a
radio station") in addition to industrial, scientific and
medical devices or home electric appliances such as
microwave ovens.
1. Before using the handset, make sure that "another radio
station" is not operating nearby.
2. If radio interference between the handset and "another
radio station" occurs, avoid interference by moving
immediately to another place or "turning off the power".
3. Contact the number listed in "General Inquiries" on the
last page for further details.
: All radio frequencies between 2,400 MHz and
Caution
z
Never use the handset that is modified. Using a modified
device violates the Radio Law and/or the
Telecommunications Business Law.
The handset follows the regulations regarding the certification of
conformity with technical regulations for specific radio stations
etc. based on the Radio Law and authentication of conformity
with technical regulations for devices etc. based on the
Telecommunications Business Law, and the "Technical
Conformity Mark
handset as a proof.
If the screws of the handset are removed and a modification is
given to the inside, the certification of conformity with technical
regulations etc. will become invalid.
Never use the handset without the valid certification etc. Doing
so violates the Radio Law and/or the Telecommunications
Business Law.
" can be displayed on the nameplate of the
z
Be careful when using the handset while driving a motor
vehicle.
Using the handset in hand while driving is regarded as a
punishable act.
However, the punishment has no application in some cases
such as when rescuing sick and injured people or maintaining
public safety.
z
Never change the basic software improperly.
This may be regarded as a conversion of software and repairs
may be refused.
Waterproof
SH-01J is waterproof to IPX5*1, IPX7*2 standards if the back
cover is attached.
*1 IPX5 means that phone keeps functioning after being
subjected to a jet flow (12.5 liters/min) discharged from a
nozzle (inner diameter: 6.3 mm), from all directions
(approximately 3 m from the handset) for 3 minutes or more.
*2 IPX7 means that SH-01J phone keeps functioning after it is
slowly submerged to depth of 1 m in static tap water at room
temperature, left there for approximately 30 minutes and
then taken out.
What you can do with waterproof of SH-01J
z
You can call and watch TV without using an umbrella in the rain
(for rainfall of approximately 20 mm per hour).
z
You can rinse off dirt from the handset. Wash the handset with
low-pressure water flow (6 liters/min or lower and tap water at
room temperature (between 5℃ and 35℃ )), holding it
approximately 10 cm below faucet or shower head. Wash by
using only your hands, not a brush or sponge, with the back
cover attached. Drain the handset before use (
"Draining water when the handset gets wet").
z
You can use the handset at a poolside. Do not throw water in a
swimming pool on the handset or soak the handset in the water
of a swimming pool.
Things to keep in mind
To maintain waterproof performance, check the followings.
z
Securely close the back cover. Be careful not to apply excessive
force on the rubber gasket when opening and closing.
z
Make sure that the back cover is completely closed without
floating.
z
To maintain waterproof performance, the handset has the back
cover that allows you to close securely. Note that opening it
forcibly may cause injuries to your nails, fingers, etc.
☞
P.XX
9
Contents/Precautions
Before Using the Handset
Part names and functions
Earpiece/Speaker
z
Use to hear the other partys voice during a call or hands-free
call, ringtone/music, etc.
z
This handset combines the earpiece and speaker. After
switching to the speakerphone during a call or after ending a
call, sound will gradually increase to the set volume to
prevent a large volume of sound from the speaker at your
ear.
Main display
Quick open button
z
Press the button to open the handset.
t Center key
z
Use to select/determine an item.
z
Press in the standby screen to activate focus mode.
qrop
z
Use to move the cursor to select an item.
z
May be described as u,v,w in operation steps.
z
Press the following keys in the standby screen to activate the
following functions.
y
y
y
y
z MENU key
z
Use to display the menu, or use menu function in the
operation guidance.
m Mail key
z
Use to activate mail app, or use menu function in the
operation guidance.
z
Press for at least 1 second in the standby screen to check
new mails.
Direction key
q
: Displays Call history list
r
: Displays Redial list
o
: Displays the phonebook
p
: Use the focus mode
s Call key
z
Use to place/receive calls.
z
Press in the standby screen to display the dial screen.
z
Press for at least 1 second to enable/disable the TO
CRUISER EX when you use the corresponding function or
app.
1 - 9,*,0,# Dial keys
z
Use to enter phone numbers or characters.
z
As for Normal menu, press the dial key (, , , etc.)
corresponding the item number for the menu to select
function or app.
z
In the standby screen, press 0 for at least 1 second to enter
a+.
$"y
z
For details
Mouthpiece/Microphone
z
Use to emit your voice during a call, or use when recording
sound.
TV antenna
Air vent
z
Use to ventilate air in the handset.
C Camera key
z
Use to activate the camera, or use menu function in the
operation guidance.
i Browser key
z
Display the web menu, or use menu function in the operation
guidance.
c Clear key
z
Deletes entered characters or numbers, or returns to the
previous screen.
z
Press in the standby screen to display i-channel channel list.
H Power/End key
z
Press for at least 2 seconds to turn the power on. (
"Turning power on/off")
z
Press for at least 1 second to turn the power off (
"Turning power on/off"), set/cancel the airplane mode (
P. 64 "Airplane mode") or manner mode (☞P. 61 "Mode
Settings").
z
Ends running function and display the standby screen.
z
Press while a call is incoming to put the call on hold.
Touch area (TOUCH CRUISER EX)
z
For details
Quick start key
P. 30 "Quick start key"
☞
*
P. 19 "Using TOUCH CRUISER EX"
☞
☞
External connector terminal
z
Use to charge the battery or connect an earphone/
microphone, PC, etc.
The earphone/microphone may require an earphone
conversion adapter 02 (sold separately).
Charging terminal
z
Use to charge the battery with included desktop holder.
UCH
☞
P. 24
P. 24
☞
14
Before Using the Handset
Strap hole
z
When attaching a strap, remove the back cover (
Removing back cover), put the strap through the strap hole,
put it on the hook inside and attach the back cover (
Aattach back cover).
Sub display
z
For details
Incoming/Charging lamp
z
Lights/Blinks when incoming or charging.
P. 18 "Viewing the sub display"
☞
☞
☞
P. 10
P. 10
Quick open button
Press the button to open the handset.
z
You can also open the handset without pressing the button.
* The antenna is built into the main body. Covering the antenna
area with your hand may influence the quality.
*
*
z
Hold the handset with your hand to operate. Do not open the
handset nearby your face, a person, or object. Also, take care
not to drop the handset by opening recoil.
z
The handset may not be opened when you press the quick
open button depending on the handset orientation.
z
To close the handset, use your hands. If you cannot close the
handset, once open the handset completely, then close the
et again.
hands
Basic operation
The followings describe basic operations of the handset such
as selecting items, or viewing screen display or icons.
Selecting an item (moving the cursor)
Usew to point the cursor to an item, and then press t to select
the item. An item that the cursor is pointed to is marked with a
frame or whose color is changed.
z
Description of operation steps and the meaning are as follows.
DescriptionMeaning
In the standby screen,
[Settings]▶[Wallpaper/display]
z
In this manual, for the operation ended with t pressed after an
item is selected/entered, pressing t description is omitted.
z
In the standby screen, press
▶
z
▶point the cursor to
[Settings] using w and then
t
press
[Wallpaper/display] using
and then press
▶point the cursor to
u
t
z
The explanations in this manual are based on the default status
of handset. The actual menu and items may differ depending
on the settings you made.
15
Before Using the Handset
Menu operations
In the standby screen, pressing z displays Normal menu/Simple
menu with which you can set or change functions, or activate apps.
z
For the menu
z
Select with w, or in Normal menu, press a dial key
corresponding
z
to the menu item number (, , , etc.) to select the menu
item.
z
Pressc to return to the previous screen.
z
PressH to return to the standby screen.
P. 82 "Menu list"
☞
Switching the menu screen
Switch the menu screen between Normal menu and Simple menu.
z
In the standby screen,
1
Yes/No
2
z
When the confirmation screen for font size is displayed,
select the font size.
▶
C
▶ Yes
Viewing standby screen
In the standby screen, you can check the current status and new
arrival information.
Status bar
z
Various information such as handset status or notifications is
displayed.
Stock icon
z
Appears when there is a missed call or new mail.
Calendar
Clock
i-channel ticker
z
i-channel information appears automatically for i-channel
subscribers.
Normal menuSimple menu
Operation guidance
Operation guidance displays menu or functions that can be
operated by pressing the function key (z,m,C,i), or the
select key (t).
z
Displayed items vary by screen.
zCt
mi
z
Main menu or functions are as follows.
Done: Determine a selected item
Submenu: Display submenu (available functions)
Back: Go back to the previous screen
Close: Close the submenu etc.
Check all/UnchkAll: Select/Cancel selecting all items
View: Display a selected image etc.
Play/Stop: Play/Stop video or music
Full: Display a selected image etc. in full screen
Send: Send mail or SMS
Stop: Stop operation such as receiving mails etc.
▲Page/▼Page, ▲/▼, ↑/↓: Scroll by page
Create new/New message: Create new memo, schedule
event, SMS, etc.
Settings: Display setting items
Using the focus mode
Select the status bar, calendar or stock icon on the standby screen
to activate the corresponding app or check the information.
In the standby screen, p/
1
z
Focus mode activates.
Select status bar/calendar/stock icon
2
z
To cancel the focus mode: c/
z
In the focus mode, displaying the menu by pressing z is
unavailable.
Calendar
t
H
Status bar
Machi-Chara
Pedometer
Stock icon
Checking notification details from stock icons
Stock icons appear in the standby screen and notify you when a
call is missed, a new mail is received, etc.
z
Main stock icons and the operations are as follows.
(Answering memo): Display the Answering memo list.
(Incoming notification/New SMS): Display the SMS list.
(Missed call): Display the incoming call list.
(Recorded messages of voicemail): Display the
confirmation screen for dialing to voicemail center.
(New mail): Display Inbox.
(Notification information): Display the status panel.
z
A stock icon will disappear when you check the content. An icon
for voicemail service will disappear when you delete the
recorded message.
16
Before Using the Handset
Profile
Display your own phone number registered to the docomo nano
UIM card. You can register a name, mail address, etc.
z
By default, only phone number which is registered to the
installed docomo nano UIM card is displayed.
In the standby screen, z▶ Profile
1
Check/use the profile
2
Name/Reading
z
Displayed when a name is registered.
Own phone number
Image
Editing/Using profile
In the standby screen, z▶ Profile
1
z
2
Checking mail address
1
2
▶ Edit profile ▶set each item▶
z
For items that can be set
phonebook"
z
To send the profile:
(share)]
z
To copy an item: Point the cursor to an item to copy
▶follow the instructions on the screen and operate
z
In the standby screen,
P. 36 "Adding contacts to
☞
▶[Send via infrared]/[Send data
m
Mail settings ▶ My address
z
Select [Update] to update My address information.
C
▶
m
Cautions when using the touch area
z
The touch area is designed to be lightly touched with your
finger. Do not forcefully press with your finger or a pointed
object (fingernail, ballpoint pen, pin, etc.).
z
In the following cases, the touch area may not work even if
you touch it. May cause a malfunction.
Operation with a gloved finger
Operation with the tip of a fingernail
Operation with foreign objects placed on the operation pad
Operation on the touch area on which a sticker, etc. is put
Operation while the touch area is wet
Operation with fingers wet with sweat, water, etc.
Tap/Double-tap
Touch the touch area lightly and then release your finger from it to
select an item or icon that [
operation of tapping the same point twice consecutively.
z
While a still picture is displayed etc., the screen can be zoomed
in/out by double-tapping. ooming in/out operations can be done
with [
Touch and hold
Keep touching the touch area with your finger to change [ ] to
[
z
When you touch the touch area, or perform no operation for a
few seconds after your finger is released, [
] on the screen as a start point.
]. Menu appears depending on function or screen in use.
] is pointed to. Double-tap is an
] returns to [ ].
Using TOUCH CRUISER EX
When operating the camera, browser, etc., touch the handset
touch
area with your finger to operate like using a touch pad. Activating a
function/app corresponding to TOUCH CRUISER EX enables
TOUCH CRUISER EX. You can operate with [
ouch
area
z
When the TOUCH CRUISER EX operation guide screen
appears, read the content and then follow the instructions on the
screen.
z
Each pressing s for at least 1 second switches TOUCH
CRUISER EX enabled/disabled.
z
When TOUVH CREUISER EX is disabled, activating a function/
app corresponding TOUCH CRUISER EX (Camera, Browser,
Databox, LINE) does not enable TOUCH CRUISER EX.
z
Even when TOUCH CRUISER EX is enabled, key operations
are available (except for some apps).
] (pointer).
Slide
Touch and hold the touch area to change [ ] to [], and then
trace with your finger to a target direction or point to scroll the
screen, or switch pages.
19
Before Using the Handset
AC adapter and DC adapter
z
Refer to users guide of AC Adapter 05 (sold separately) or DC
Adapter 04 (sold separately).
z
AC Adapter 05 covers from 100 to 240 V AC.
z
The shape of the plug for the AC adapter is for 100V AC (for
domestic use). To use the AC adapter of 100 to 240V AC
overseas, a conversion plug adapter applicable to your country
of stay is required. Do not use a voltage converter for overseas
travel to charge the battery.
Charging with desktop holder
z
It is recommended to use AC Adapter 05 (sold separately) for
charging with desktop holder. Following operations describe how
to charge using AC Adapter 05.
z
Use the desktop holder with the handset closed.
Turn the "B" side of the microUSB plug of AC
1
adapter up and insert it horizontally into the
connector terminal of the desktop holder
z
Check the direction of the microUSB plug and insert it
horizontally.
z
Do not forcibly insert or remove the microUSB plug. The
connector terminal or microUSB plug may cause damage or
malfunction.
micro S lu
ee side marked
ith u
Connector
terminal
When the handset is placed into the desktop
3
holder, the charging lamp lights and charging
starts
z
Place the handset tilting along the slant of desktop holder
recess in the direction of arrow until it clicks.
Char in lam
When charging is complete, the charging lamp
4
turns off
z
Lift up the handset while holding the desktop holder.
Remove the power plug of AC adapter from the
5
outlet
Remove the microUSB plug of the AC adapter
6
from the connector terminal of the desktop
holder horizontally
z
When the charging lamp does not illuminate, the handset may
not be placed into the desktop holder correctly. Remove and
place it again correctly.
z
When placing the handset on the desktop holder, be careful not
to let a strap etc. caught.
Unfold the power plug of AC adapter to insert
2
into a power outlet
Po er lu
C
outlet
Charging with AC adapter/DC adapter
Read the user's guides of AC Adapter 05 (sold
separately) and DC Adapter 04 (sold separately)
z
Following operations describe how to charge with AC Adapter 05
or DC Adapter 04.
Inset the microUSB plug of the AC adapter/DC
1
adapter horizontally into the external connector
terminal on the handset with the side marked
with "B" turned up
z
Check the direction of the microUSB plug and insert it
horizontally.
Char in lam
ternal connector
terminal
micro S lu
ee side marked ith u
23
Before Using the Handset
When you erect the AC adapter power plug and
2
insert it into an outlet or insert the DC adapter
power plug into a car accessory socket, the
charging lamp illuminates and charging starts
Po er lu
C
outlet
Po er lu
Turning power on/off
Turning power on
H
1
(for at least 2 seconds)
z
When you turn the power on for the first time, make the
initial settings (
Turning power off
P. 28 "Initial settings").
☞
ccessor socket
C ada terC ada ter
When charging is complete, the charging lamp
3
turns off
Remove the AC adapter power plug from the
4
outlet, or remove the DC adapter power plug
from the car accessory socket
Remove the microUSB plug of the AC adapter/
5
DC adapter horizontally from the external
connector terminal of the handset
H
1
The main display is turned off when the handset is not in use for a
set length of time.
Press any of key to turn on the display while the main display is
turned off.
(for at least 1 second)
Showing/Hiding the main display
▶ Power off
Character entry
Enter characters for functions or apps such as phonebook
and mail on the handset.
Mechanism of character entry
Multiple characters are assigned to each dial key. Character
switches by pressing a key.
z
There are two types character input modes as follows.
Full-width characters: Kanji, Hiragana, Katakana, upper case
alphabet, lower case alphabet, number, symbol
Half-width characters: Katakana, upper case alphabet, lower
case alphabet, number, symbol
z
Do not forcibly insert or remove the microUSB plug. The
external connector terminal or microUSB plug may be
damaged or malfunction.
When using a DC adapter
z
The DC adapter should only be used in negative grounded
vehicles (12 and 24V DC).
z
Do not use with the car engine shut off. May drain the car
battery.
z
The DC adapter fuse is a consumable product. For
replacement, purchase a new fuse at a nea
etailer etc.
r
z
Refer to the users guide of DC Adapter 04 for details.
rest auto parts
Charging with Micro USB Cable 01
You can charge the handset by connecting the handset to a
PC with Micro USB Cable 01 (sold separately).
z
For details on connecting to a PC nP.59 "Connecting the
handset and PC"
Cursor
z
Point the cursor to a position to add.
Submenu
z
Use to make entry settings or register words to the user
z
dictionary (
entry").
Switch input mode
z
Switch the input mode.
y
Press m to switch input mode in the order of Half alphabet
→Half numeric→Hiragana.
When you turn the power on for the first time, the initial
settings screen (Japanese) is displayed. Follow the
instructions on the screen and operate.
z
To make initial settings in English, press
skip the initial settings screen, then change the language to
English from 設定 (Settings) menu, and then reboot the handset.
The initial settings screen in English is displayed.
z
For changing display language,
display to English"
z
When the handset log acquisition screen or software update
screen is displayed, read the content and select [OK].
Initial settings of security key
z
For security key, there are two types. Set either passcode or
password.
For passcode, set four- to sixteen-digit number.
For password, set four- to sixteen-digit alphanumeric and
halfwidth symbol
* Some half-width symbols are not available.
z
For security key settings
When the initial settings screen is displayed,
1
*
including at least one or more alphabets.
☞
P.XX "Security key setting"
☞
Set
z
Moving to setting of docomo service:
z
To finish the initial settings: H/
z
▶[はい] (Yes) to
P.XX "Changing screen
C
C
▶
z
▶[Yes]
Initial settings for docomo service
z
Alternatively, in the standby screen,
service].
When the Setting of docomo service screen is
1
z
▶[Settings]▶[docomo
displayed, Start setting
Make the initial settings
2
z
The setting items are as follows.
docomo apps password
docomo location information
Remote initialization
* Not appeared when docomo apps password is not set.
[OK]
3
*
Wi-Fi settings
If you use Wi-Fi function of the handset, you can use mail or
Internet by connecting to access points of your home,
corporate network or public wireless LAN service.
Enter the security key 0000
2
z
When an information screen is displayed, select [OK].
Passcode / Password
3
z
Enter a new [Passcode]/[Password] and then enter
[Passcode]/[Password] again.
C▶C
4
Radio interference with Bluetooth devices
z
Wireless LANs (IEEE 802.11b/g/n) use the same frequency
band (2.4 GHz) as Bluetooth devices. Therefore, using the
wireless LAN device near a Bluetooth device may cause radio
interference, lowering of communication speed, noise or
connection failure. In this case, turn off the Bluetooth device
or keep the handset and the wireless LAN device at least
approximately 10 m away from the Bluetooth device.
z
Packet communication is also available while [Wi-Fi] is set to
On. Wi-Fi connection is prioritized while Wi-Fi connection is set,
but the connection is automatically switched to that of LTE/3G/
GPRS network once Wi-Fi connection is terminated. Note that
packet communication charges may be incurred in this case.
z
Refer to the manual of your wireless LAN base unit when using
he access point at home etc.
t
z
Operate access point registration near the access point.
z
If you use the docomo service by using Wi-Fi function, set
d ACCOUNT in advance. In the home screen, [★]
[docomo service/cloud]▶[dアカウント設定] (Set d ACCOUNT)
to set it.
In the standby screen, z▶[Settings]▶
1
▶[Settings]▶
[WLAN]
[WLAN settings]▶set to ON
2
Select an access point
3
z
If you select an access point protected by security, enter the
password (security key) and select [Connect].
z
To register access points manually:
enter the network name ▶ set security ▶ [Save]
z
WPS-compatible access points can be easily registered. In
the standby screen,
[Easy Settings] ▶ [WPS Push Button]/[WPS PIN Entry] to
register an access point.
z
▶ [Settings] ▶ [WLAN] ▶
z
▶ [Add network] ▶
z
▶
28
Before Using the Handset
z
If the access point you want to connect to is not displayed:
z
▶ [Refresh] to scan for access point again.
z
When you select an access point and connect to it with a
wrong password (security key), [IP Configuration Failure], [WiFi
Connection Failure], [Authentication problem] or [Connected
(Limited)] is displayed. Confirm the password (security key).
When [IP Configuration Failure] or [Connected (Limited)] is
displayed after entering the correct password (security key),
you may not have acquired the correct IP address. Connect to
the access point again after confirming signal status.
z
The registration process using WPS takes a few minutes. After
completion of the registration of the access point, check that
the proper connection to the access point is acquired.
z
As for the manual registration of an access point, this function
supports WEP, WPA/WPA2 PSK and 802.1xEAP as the
security setting.
z
you connect to an access point which is not connected to the
If
z
nternet, [
I
made by mobile networks, not Wi-Fi connection.
To make Wi-Fi communication by using such an access point,
enable [Using this AP without internet connection] of Advanced
options before connecting to the access point.
] is displayed and the communication may be
Using running apps
You can switch apps with several apps activated at the same
time, or enable/disable Bluetooth function.
&
1
z
You can operate even when using function or app.
Bluetooth function
: Enable Bluetooth function/ : Disable Bluetooth
function
Close app
z
To end app, press z while a running app is selected.
Favorites
z
Register functions or apps to activate (
Favorites").
Running apps
z
You can switch apps while several apps are activated.
App list
z
You can select a function or app from App list to activate.
P. 29 "Using
☞
Using Favorites
Register frequently-used functions and apps to Favorites so
that you can activate them quickly.
&▶m
1
$
z
Alternatively, press
z
Registered functions or apps can be displayed by pressing
the key while other function or app is used.
Submenu
z
You can register/cancel functions or apps.
Registered items
z
Functions or apps can be newly registered to [
▶
m
to display.
] - [].
29
Before Using the Handset
Call
You can use the phone and phonebook, and make settings for
voice/answering memo, operations available when calls are
received, etc.
In the standby screen, enter a phone number▶
1
*
(for at least 1 second)
Enter a number to send▶
2
Yes during the call
3
s
Making a call
In the standby screen, enter a phone number
1
z
Always enter the city code, even when it is a local number.
z
You can set to notify/not to notify the other party of your
phone number for each call by adding "186"/"184"to the
head of the phone number.
z
To delete the last entered number:
z
To delete all entered number: c (for at least 1 second)
z
To move the cursor and delete a number:
s
2
z
To use a call option and dial:
▶s▶
item
z
To create/send SMS:
C
z
To register to the phonebook:
register
z
z
▶set each item▶
▶[Send SMS]▶enter a message▶
C
c
v
c
▶
z
▶[Call option]▶set each
t
▶select a contact to
Making a call with Speed dial
You can make a call quickly to the other party who is
registered to the speed dial.
z
Register a contact in advance (
phonebook").
Registering Speed dial
In the standby screen, z▶ Phone ▶ Speed
1
dial
Select <Not registered> of any number to
2
register
Dialing with speed dial
In the standby screen, enter a number of speed
1
dial (0 - 99)
z
If multiple phone numbers are registered in a contact, a
screen for selecting call number appears.
z
To display the speed dial list, enter a unregistered speed dial
number in the standby screen and then press s. You can
make a call by selecting a contact from the speed dial list, or
register a new speed dial.
z
When a mail address is registered to the contact of speed dial,
mail can be created by entering the speed dial number in the
standby screen and then pressing m.
▶select a contact
s
▶
P. 36 "Adding contacts to
☞
To end a call,
3
z
You can quickly activate functions such as "Calculator", "Timer"
or "Alarm" by entering a number in the input number screen
After a number is entered, follow the instructions on the screen.
Available functions vary by entered number.
H
Entering touch-tone signals
When using services in which you are required to enter
numbers additionally during a call, such as inquiry about the
balance in your bank account or ticket reservation, enter
pause (,)/wait ( ) after entering a phone number to make a call
with an additional number added to the main phone number.
Adding 2 seconds pause
After making a call to a main phone number, the handset
automatically pauses for 2 seconds and an additional number is
sent.
In the standby screen, enter a phone number▶
1
#
(for at least 1 second)
Enter a number to send▶
2
Adding wait
After making a call to a main phone number, the handset
automatically waits and then a screen asking whether to send an
additional number is displayed. Select [Yes] to send an additional
number.
s
Making a call with Kantan Hasshin (speech
recognition)
Use Kantan Hasshin (speech recognition) to make a call to the
other party whose contact is registered to Speed dial by voice.
z
Enable [Kantan Hasshin] in advance (
Hasshin").
Open the handset/When the handset is opened,
1
&
z
[★] is displayed.
z
Operate in the standby screen or menu list screen.
Speak a name of the other party toward the
2
mouthpiece/microphone to make a call to
z
Speak "Denwa" or "Hasshin" following a name of the other
party to call.
z
Example: ○○○ san ni denwa, △△△ san ni hasshin
Confirm the other party's name▶ Yes
3
z
If multiple phone numbers are registered in a contact, a
screen for selecting call number appears.
z
It may not work correctly if a name is registered to several
speed dials.
z
To recognize names correctly, speak up the last name or first
name, or first name and last name consecutively registered in
the contact. If it is not recognized correctly, check first name
and last name registered in the contact (
Using phonebook").
P.XX "Kantan
☞
P.XX "Checking/
☞
31
Call
Emergency call
Emergency callsPhone number
Police110
Fire and ambulance119
Marine emergency118
z
The handset supports "Emergency call location notification".
When you make a call to an emergency number such as 110,
119 and 118, the information of your location (location
information) is automatically notified to the agency that has
received the emergency call (e.g. the police station).
Depending on your location and the reception status of the
signal, the agency that has received the emergency call may
not be able to confirm the exact location.
If you are not sending your caller ID by calling with "184" added
or other means, your location information and phone number
are not notified. However, if the agency that has received the
emergency call considers your location information and phone
number necessary for important purposes, such as life saving,
the agency may retrieve them regardless of your settings.
In addition, the area/timing to introduce "Emergency call
location notification"depends on the state of preparation in
each agency that receives emergency calls.
z
In Japan, you cannot make a call to the emergency number
(110, 119 or 118) when a docomo nano UIM card is not
inserted, while the PIN code is locked, from the PUK (PIN
Unlock Key) entry screen or from the password entry screen
or decrypting the storage.
f
z
When calling 110, 119 and 118 from your handset, the police or
fire stations may return your call for verification purposes. State
that you are calling from a mobile phone, and give your phone
number and exact present location.
Remain stationary to ensure that the call is not disconnected
while you are on the line, and keep the handset turned on to
receive calls for approximately 10 minutes afterwards.
z
Depending on the region, calls to the police or fire station of the
local area may not be made.
z
When you make a call to the emergency number (110, 119 or
118) while Reject call setting is set, items of Reject call setting
are set to [OFF].
z
Even with [Restrict calls] enabled, when you make call to
emergency number (110, 119 or 118), the handset a
ncoming calls from the other party who is not registered in the
i
phonebook for approximately 5 minutes in order to receive
callback from the agency.
That includes when you make a call to emergency number
(110, 119 or 118) with prefix "184" or "186" registered in the
phonebook.
ccepts
Calling Method
z
When calling to a land-line phone: 010
code (city code)
z
When calling to a mobile phone: 010
other partys mobile phone number
y
As for the other parties mobile phone numbers and area
codes (city codes) that begin with "0", omit the first "0" when
entering (except some countries or regions such as Italy).
y
Alternatively, enter "009130-010" as usual or "+" instead of
"010".
▶the other partys phone number▶
▶country code▶area
s
▶country code▶the
s
▶
Answering a call
When a call is received, the ringtone sounds
1
and the incoming lamp flashes
s
2
z
Alternatively, press t,1 - 9,*,0,# to answer
calls.
To end a call,
3
Placing a call on hold
When a call is received, the ringtone sounds
1
and the incoming lamp flashes
H
2
Adjusting ringtone volume
When a call is received, the ringtone sounds
1
and the incoming lamp flashes
u
2
Rejecting an incoming call
When a call is received, the ringtone sounds
1
and the incoming lamp flashes
z
2
▶ Reject call
Answering by answering memo
H
International call (WORLD CALL)
WORLD CALL is an international calling service available from
DOCOMO devices in Japan.
z
To make an international call through a company other than
DOCOMO, contact the respective companies for instructions.
z
The caller ID may not be notified or displayed correctly
depending on overseas network operators. In this case, making
a call with incoming call history is not available.
When a call is received, the ringtone sounds
1
and the incoming lamp flashes
z
2
3
Playing an answering memo
1
▶ Absence Memo
Select an answering memo
In the standby screen, p▶select the stock
icon
z
Alternatively, in the standby screen,
▶[Answering Memo List] to check answering memos.
Memo]
Select an answering memo
2
z
▶[Phone]▶[Call/Ans
32
Call
Mail/Web browser
Use docomo mail or SMS to send/receive messages, and use
the web browser to view web pages.
Attachment
Attach still pictures, videos, etc. to docomo mail to send.
z
Some files cannot be attached depending on the file format.
In the mail creation screen, select Attachment
1
field
docomo mail
You can send and receive mails using mail address of
DOCOMO ( docomo .ne.jp). Data can be easily transferred
when you have changed models or restored when you have
lost the handset since sent and received mails are saved on
the docomo mail server. Also, you can send, receive and view
mails using the same mail address from multiple devices such
as a tablet, PC browser, etc. if you use d ACCOUNT.
z
For details on docomo mail, refer to the DOCOMO website.
z
When you use for the first time, read "License agreement"
(Japanese), then select [Agree] (if "use of cloud license
agreement" appears, read it and select [Agree]). When Welcome
to docomo mail screen is displayed, press C.
Creating/sending docomo mail
In the standby screen,
1
Create new mail
2
z
Alternatively, press m to display the mail creation screen.
m
Select a file to attach
2
Picture/Image: Attach shot still pictures, or downloaded
images.
Video: Attach videos.
Phonebook: Attach the phonebook contacts.
Run camera: Activate the camera to shoot still pictures for
attaching.
Other files: Attach various format files saved in the handset
or microSD card.
C
3
Adding an attachment file
In the mail creation screen, select Attachment
1
field
m
2
Deleting an attachment file
1
▶select a file to attach▶
In the mail creation screen, select Attachment
C
field
Point the cursor to an attachment file▶
2
Delete 1 ▶ Yes ▶
z
To delete selected files:
attachment files
z
To delete all files:
C
i
▶[Delete selection]▶select
C
▶
▶[Yes]▶
i
▶[Delete all]▶[Yes]▶
C
i
C
▶
Mail creation screen
Select the Recipient field
3
Select recipient adding option▶enter a
4
C
▶[Yes]▶
C
m
▶select an adding recipient method▶
C▶C
C
i
▶[Delete selection]▶select
C
i
▶[Delete all]▶[Yes]▶
m
recipient
z
To add recipient:
enter a recipient▶
z
To delete one recipient: Point the cursor to a recipient
i
z
To delete selected recipients:
recipients
z
To delete all recipients:
Select the Subject filed▶enter a subject
5
Select the Message field▶enter a message
6
C
7
z
To save as draft:
▶C▶
▶[Delete 1]▶[Yes]▶
▶
C
▶
Decorating message (Deco-mail)
You can decorate a mail message by inserting images, changing
text color, font size, or background color, etc.
In the mail creation screen, select the message
1
field
z
2
▶ Deco ▶select a decoration▶decorate
Decoration menu
z
To decorate entered text:
decorate
decoration
▶select a end point to decorate▶[Deco]▶select a
▶decorate
i
▶select a start point to
38
Mail/Web browser
Submenu operations on mail creation screen
In the mail creation screen,
1
Select an item
2
Switch to view screen: Switch to docomo mail menu screen.
Preview: Display a docomo mail that is being created in
preview.
Save as draft: Save a docomo mail that is being created as
a draft in "Drafts".
Template: Use templates to create Deco-mails or save a
docomo mail that is being created as a template.
End editing without saving: End docomo mail without saving
docomo mail that is being created.
z
Displaying a message
In the standby screen, z▶ Mail ▶ SMS
1
z
Messages are grouped into threads according to their
destinations/senders and displayed.
Receiving docomo mail
docomo mail is automatically received.
Receive docomo mail automatically
1
z
The stock icon [
z
and the status bar, respectively.
z
Not receiving automatically: In the standby screen,
[Mail settings]▶[Communication setting]▶[Auto reception
setting]
In the standby screen, p▶select the stock
2
▶[Confirm every time]/[OFF]
] and [] appear in the standby screen
m
▶
icon
z
Alternatively, in the standby screen,
Select a folder▶select an unread docomo mail
3
Checking new mails/SMS
You can retrieve new docomo mail or SMS that is sent when you
are out of service area, the handset is turned off, etc. from the
center.
In the standby screen, m (for at least 1
1
m
▶[Inbox] to check.
second)
z
Alternatively,
m
▶select [Check new mail/Update].
SMS
You can send and receive text messages with mobile phone
numbers serving as destinations.
* For details on the number of characters which can be sent and
received etc., refer to "Short Message Service (SMS)" on the
DOCOMO website.
z
You can also exchange messages with those who use network
of overseas network operators. Refer to the DOCOMO
International Services website for information on countries where
this service is available and available overseas network
operators.
Image
z
Displayed if an image of the other party is registered in
the phonebook.
Number of unread messages
Destination/Sender
Number of messages in thread
Date and time of the message exchange
Select a thread
2
Destination/Sender
Message
Date and time of the message exchange
Check the message
3
z
Call to sender:
z
Registering sender to the phonebook:
Address Book]
C
z
▶[Call sender]▶
▶select an item to register▶set each item▶
s
z
▶Register to
Replying message
In the standby screen, z▶ Mail ▶ SMS
1
Select a thread
2
Enter a message▶
3
C
Forwarding message
In the standby screen, z▶ Mail ▶ SMS
1
C
2
▶enter a recipient and message▶
z
If destinations are devices owned by those who use network of
overseas network operators, enter "+", the country code and
the recipients mobile phone number. If the phone number
begins with "0", omit the first "0". Alternatively, enter "010", the
country code and the phone number.
z
Half-width katakana and special symbols in SMS messages
may not appear correctly for recipient.
z
SMS cannot be sen
t when "186" or "184" is added.
C
In the standby screen, z▶ Mail ▶ SMS
1
Select a thread
2
Point the cursor to a message▶z▶ Forward
3
Enter a recipient and message▶
4
39
C
Mail/Web browser
Deleting message
PC mail
In the standby screen, z▶ Mail ▶ SMS
1
Select a thread
2
Point the cursor to a message▶z▶ Delete
3
messages
▶ Yes
Deleting thread
In the standby screen, z▶ Mail ▶ SMS
1
z
2
▶ Delete selected ▶select threads▶
Yes
z
To delete all threads:
z
▶[Delete all threads]▶[Yes]
Setting message
In the standby screen, z▶ Mail ▶ SMS
1
z
2
3
▶ Settings
Select an item
Change SMS app: Check an app to send and receive SMSs
with.
Delete old messages: When the number of saved messages
reaches its limit, old messages are automatically deleted.
Text message limit: Set the number of messages to be
saved by thread.
Delivery reports: Notify you that sent messages have been
received every time a message is received.
Manage SIM card messages: Manage messages saved on
the docomo nano UIM card.
Notifications: Notify you that messages have been received
n the status bar.
o
Sound: Set the ringtone to be rung when a message is
received.
Vibrate: Set the vibrator to be activated when a message is
received.
C
▶
Configure a mail account provided by a service provider to
exchange mail.
In the standby screen, z▶ Mail ▶ PC Mail
1
Create new
2
PC mail creation screen
Select the recipient field
3
Select recipient adding option▶enter a
4
recipient
z
To add recipient: [新規登録](enter new)
adding option
z
To delete one recipient: highlight recipient
[1件](1 recipient)▶[Yes]
z
To delete selected recipients:
(several recipients)
z
To change recipient type: highlight recipient
更] (change to To) / [Ccへ変更] (change to Cc) / [Bccへ変更]
(change to Bcc)
Select the subject field▶enter a subject
5
Select the message field▶enter a message
6
C
7
z
To save as a draft:
z
To discard mail being created:
c
▶
▶enter a recipient
▶select recipients▶C▶[Yes]
z
▶select an recipient
z
▶
▶[Delete]▶
z
▶[Delete]▶[複数選択]
C
▶
▶[Toへ変
▶[下書きを保存] (save draft)
z
▶[Discard]▶[Yes]
Delivery reports
z
When you send a message to mobile phones of other carriers,
the notification for confirming that it has been received may not
be sent to you.
40
Mail/Web browser
Using Bluetooth function
z
To register/connect a Bluetooth device, the Bluetooth passkey
may need to be entered. Before starting the registration, decide
one- to sixteen-digit number.
z
Enter the same number on the handset and the other partys
Bluetooth device.
Disconnecting Bluetooth device
In the Bluetooth screen, select the Bluetooth
1
device to disconnect
Submenu operations on the Bluetooth screen
z
Set Bluetooth to [ON] beforehand.
▶ OK
In the standby screen, z▶Settings ▶
1
Bluetooth
Bluetooth
2
Select a Bluetooth device▶ Pair
3
z
The confirmation screen for connection may be displayed.
z
Entering the Bluetooth passkey may be necessary
depending on the other partys Bluetooth device. Also, some
Bluetooth devices may start connection after completing
registration.
z
To display/hide the handsets information on other Bluetooth
devices: [SH-01J]
y
The handsets information is automatically hidden when
the period of time set for Visibility timeout has passed.
z
To search for Bluetooth devices:
z
PressC of a paired Bluetooth device to change the name
and the connection type of the other partys Bluetooth
device.
z
You can connect up to 7 Bluetooth devices at the same time.
Bluetooth devices may not work properly or the number of
Bluetooth devices which can be connected at the same time
may differ depending on the profile.
z
If you fail to connect a Bluetooth device, connection may
become available after re-registering it.
z
When the Bluetooth function is set to [ON], the handset is set
to receive registrati
Bluetooth devices. Make the setting for displaying the handsets
information on other Bluetooth devices in advance to allow the
handset to be searched for by other Bluetooth devices.
z
While in connection stand-by, even if a connection request from
a Bluetooth device is received, connection may not be made
depending on the signal status etc.
z
For details o
device, refer to the manuals of the Bluetooth device to be used.
on requests/connection requests from other
n the operations of the other partys Bluetooth
z
[Refresh]
▶
In the Bluetooth screen,
1
Select an item
2
Search for devices :Search Bluetooth devices nearby.
Rename phone: :Change the handsets name.
Visibility timeout :Set how long the handsets information will
be displayed on other Bluetooth devices.
Handsfree setting: Set whether to always have voices output
from the connected Bluetooth compatible hands-free device
during a voice call.
Show received files: Display the history of data received via
Bluetooth connection.
z
Sending/Receiving via Bluetooth
communication
Sending data
Example Still picture
In the standby screen, z▶ Album
1
Select a still picture
2
z
3
4
1
2
3
▶ Send ▶ Bluetooth
z
Set the receivers Bluetooth device to the reception stand-by
status.
Select a Bluetooth device to connect to
Receiving data
Data is sent from the sender's Bluetooth device
In standby screen, p▶select the status bar▶
select the incoming notification▶ Accept
In standby screen, p▶select the status bar▶
select the receiving notification▶select the
received data
When receiving registration request from Bluetooth
device or connection request from unregistered
Bluetooth device
Registration request/Connection request from
1
Bluetooth device
In the standby screen, p▶select the stock
2
icon
z
When the confirmation screen about the settings on pairing
appears, select [Pair].
z
Entering the Bluetooth passkey may be necessary
depending on the other partys Bluetooth device.
z
The confirmation screen for connection may be displayed.
Unregistering Bluetooth device
In the Bluetooth screen, point the cursor to the
1
Bluetooth device to unregister
▶ Pairing request ▶ Pair
C
▶
▶ Unpair
z
Note that if you select [Delete and register] when receiving all
data, all data registered to the target function are deleted.
z
Receiving all data may not be available depending on the data
type.
z
When available space in the save destination becomes
insufficient while receiving data, the data being received to that
point are saved and receiving ends.
75
Data communication
Specific Absorption Rate (SAR) of
Declaration of Conformity
Mobile Phones
This model SH-01J mobile phone complies with Japanese
technical regulations and international guidelines regarding
exposure to radio waves.
This mobile phone was designed in observance of Japanese
technical regulations regarding exposure to radio waves(*1) and
limits to exposure to radio waves recommended by a set of
equivalent international guidelines. This set of international
guidelines was set out by the International Commission on NonIonizing Radiation Protection (ICNIRP), which is in collaboration
with the World Health Organization (WHO), and the permissible
limits include a substantial safety margin designed to assure the
safety of all persons, regardless of age and health condition.
The technical regulations and international guidelines set out limits
for radio waves as the Specific Absorption Rate, or SAR, which is
the value of absorbed energy in any 10 grams of tissue over a 6minute period. The SAR limit for mobile phones is 2.0 W/kg. The
highest SAR value for this mobile phone when tested for use at the
head is 0.819 W/kg(*2) and when worn on the body is
0.555 W/kg(*3). There may be slight differences between the SAR
levels for each product, but they all satisfy the limit.
The actual SAR of this mobile phone while operating can be well
below that indicated above. This is due to automatic changes to
the power level of the device to ensure it only uses the minimum
required to reach the network. Therefore in general, the closer you
are to a base station, the lower the power output of the device.
This mobile phone can be used in positions other than against your
ear. Please keep the mobile phone farther than 1.5 cm away from
your body by using such as a carrying case or a wearable
accessory without including any metals. This mobile phone
satisfies the technical regulations and international guidelines.
The World Health Organization has stated that "a large number of
studies have been performed over the last two decades to assess
whether mobile phones pose a potential health risk. To date, no
adverse health effects have been established as being caused by
mobile phone use."
Please refer to the WHO website if you would like more detailed
information.
(
http://www.who.int/docstore/peh-emf/publications/facts_press/
fact_english.htm
Please refer to the websites listed below if you would like more
detailed information regarding SAR.
Ministry of Internal Affairs and Communications Website:
(
http://www.tele.soumu.go.jp/e/sys/ele/index.htm
Association of Radio Industries and Businesses Website:
(
http://www.arib-emf.org/01denpa/denpa02-02.html) (in Japanese
only)
NTT DOCOMO, INC. Website
http://k-tai.sharp.co.jp/support/sar/) (in Japanese only)
*1 Technical regulations are defined by the Ministerial
*2 Including wireless functions that can be simultaneously
*3 Including wireless functions that can be simultaneously
European RF Exposure Information
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
r
ecommended by international guidelines. These guidelines were
)
)
)
Ordinance Related to Radio Law (Article 14-2 of Radio
Equipment Regulations).
used with LTE/FOMA.
used with LTE/FOMA.
developed by the independent scientific organization ICNIRP and
include safety margins designed to assure the protection of all
persons, regardless of age and health.
The guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit for mobile devices is 2 W/
kg and the highest SAR value for this device when tested at the
h
ead is 0.736 W/kg* and when worn on the body is 1.52 W/kg*.
For body-worn operation, this mobile device has been tested and
meets the RF exposure guidelines when used with an accessory
containing no metal and positioning the handset a minimum of 5
mm from the body. Use of other accessories may not ensure
compliance with RF exposure guidelines.
As SAR is measured utilizing the devices highest transmitting
power the actual SAR of this device while operating is typically
below that indicated above. This is due to automatic changes to
the power level of the device to ensure it only uses the minimum
level required to reach the network.
* The tests are carried out in accordance with international
guidelines for testing.
Hereby, SHARP CORPORATION declares that the radio equipment type
SH-01J is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
(http://www.sharp.co.jp/k-tai/) (in Japanese only)
Manufacturer’s Address:
SHARP Corporation, Communication Systems Division
2-13-1 Iida Hachihonmatsu
Higashihiroshima-City
Hiroshima,
739-0192
Japan
zDescription of accessories
Battery Pack3.85V 1800mA-h
Micro USB cable
For charging, peripherals, etc.
microSD CardmicroSD™ / microSDXC™
nano UIM cardDOCOMO SIM card / non-DOCOMO SIM
cards
The handset can unlock the SIM lock.
zFrequency bands
GSM 900
DCS 1800
WCDMA FDD I
LTE FDD I
Bluetooth
WALN 2.4GHz
NFC
GPS
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
z
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the users
authority to operate the equipment.
Information to User
This equipment has been tested and found to comply with the
limits of a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation if this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
1. Reorient/relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for
help.
FCC RF Exposure Information
Your handset is a radio transmitter and receiver.
It is designed and manufactured not to exceed the emission limits
for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless handsets employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC is 1.6 W/kg.
The tests are performed in positions and locations (e.g., at the ear
and worn on the body) as required by the FCC for each model. The
highest SAR value for this model handset when tested for use at
the head is 0.67 W/kg and when worn on the body, as described in
this user guide, is 0.98 W/kg.
For body worn operation, this phone has been tested and meets
the FCC RF exposure guidelines. Please use an accessory
designated for this product or an accessory which contains no
metal and which positions the handset a minimum of 1.5 cm from
the body.
The use of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements, and should be
avoided.
The FCC has granted an Equipment Authorization for this model
handset with all reported SAR levels evaluated as in compliance
with the FCC RF emission guidelines. SAR information on this
model handset is on file with the FCC and can be found under the
Display Grant section of http://transition.fcc.gov/oet/ea/fccid/ after
searching on FCC ID APYHRO00240.
Additional information on Specific Absorption Rates (SAR) can be
(
found on the FCC website at
radiofrequency-safety.
http://www.fcc.gov/encyclopedia/
)
Export Administration Regulations
The Japan Export Administration Regulations ("Foreign
Exchange and Foreign Trade Act" and its related laws) may be
applied to this product and its accessories under certain
conditions. The Export Administration Regulations may also
be applied. To export or reexport the handset and its
accessories, conduct all legally required procedures at your
own risk and expense. For details on the procedures, contact
the Ministry of Economy, Trade and Industry or the US
Department of Commerce.
Intellectual Property Right
Copyrights and rights of portrait
z
Data with third party copyrights such as text, images, music and
software that is downloaded via Internet websites, acquired by
TV, video, etc. or shot by the handset cannot be duplicated,
altered or publicly transmitted without rightful partys consent.
Only duplicating, quoting, etc. for personal use are permitted
under the Copyright Act.
Even if for personal use, filming and recording may be prohibited
for stage performances, shows, exhibitions, etc. Also, shooting
anothers image or posting another s image on Internet websites
without his/her consent may constitute a violation of ones right
to his/her image.
Registered trademarks and trademarks
z
"FOMA", "dmenu", "mopera U", "ビジネスmopera", "デコメ ",
"Deco-mail", "デコメ絵文字 ", "i-αppli", "i-mode", "WORLD
WING", "公共モード", "WORLD CALL", "エリアメール",
"sp-mode", "iチャネル", "イマドコサーチ", "イマドコかんたんサーチ", "おまかせロック", the "dmenu" logo, the "Area Mail"
logo, the "i-channel" logo, the "docomo mail" logo, and the
"Phonebook" logo are trademarks or registered trademarks of
NTT DOCOMO, INC.
z
"Catch Phone (Call waiting service)" is a registered trademark of
Nippon Telegraph and Telephone Corporation.
z
LINE is a trademark or registered trademark of LINE
Corporation.
z
voice recognition engine.
z
Microsoft , Windows , Windows Media , Windows Vista and
PowerPoint are trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other
countries.
z
Microsoft Excel and Microsoft Word are product names of
Microsoft Corporation in the U.S.A.
z
Oracle and Java are registered trademarks of Oracle and/or its
affiliates.
Other names may be trademarks of their respective owners.
z
QR code is a registered trademark of Denso Wave Inc.
z
microSD Logo and microSDHC Logo are trademarks of SD-3C,
LLC.
z
The handset features LCFONT, developed by Sharp
Corporation, to make the LCD easier to view and read. LCフォント/LCFONT and
Corporation.
z
OBEX is a trademark of Infrared Data Association .
z
Wi-Fi is a registered trademark of Wi-Fi Alliance .
of Advanced Media, Inc. is used for the internal
are registered trademarks of Sharp
92
Appendix/Index
z
This product includes software developed by the OpenSSL
Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)
z
This product includes cryptographic software written by Eric
Young(eay cryptsoft.com)
z
Portions Copyright 2004 Intel Corporation
This product partly uses the software of Intel Corporation.
z
iWnn of OMRON SOFTWARE Co., Ltd. is used for conversion
methods for Japanese language, and for phrase prediction
methods for English.
iWnn OMRON SOFTWARE Co., Ltd. 2008-2015 All Rights
Reserved.
iWnn IME OMRON SOFTWARE Co., Ltd. 2009-2015 All
Rights Reserved.
z
Shin Go M, the font type installed in this product, is provided by
Morisawa Company, Ltd.
* Shin Go is a registered trademark of Morisawa Company,
Ltd.
z
"翻訳ファインダー", "AQUOS", "AQUOS" logo, "SHSHOW"
logo, "フレーミングアドバイザー/FramingAdviser",
"PASSNOW", and "タッチクルーザーEX" are trademarks or
registered trademarks of Sharp Corporation.
z
All other company names and product names are trademarks or
registered trademarks of the respective companies.
Others
z
Under the MPEG-4 Visual Patent Portfolio License, customers
have licensed permission for the following use of this product to
engage in non-profit personal use. Other uses are not permitted.
Encoding MPEG-4 standard video (henceforth referred to as
MPEG-4 video).
Decoding an MPEG-4 video that a customer not engaged in
personal commercial activities has encoded.
Decoding an MPEG-4 video obtained from a licensed
provider.
For details on other intended uses, contact MPEG LA, LLC.
z
This product is licensed under the MPEG-4 Systems Patent
Portfolio License for encoding in compliance with the MPEG-4
Systems Standard. An additional license and payment of
royalties are necessary in the following cases.
Data stored or replicated in physical media which is paid for
on a title by title basis.
Data which is paid for on a title by title basis and is transmitted
to an end user for permanent storage and/or use.
Such additional license may be obtained from MPEG LA, LLC.
Contact MPEG LA, LLC for additional details.
z
This product is licensed under the AVC patent portfolio license
for the personal and noncommercial use of a consumer to (i)
encode video in compliance with the AVC standard (henceforth
referred to as AVC video) and/or (ii) decode AVC video that was
encoded by a consumer engaged in a personal and
noncommercial activity and/or was obtained from a video
provider licensed to provide AVC video. No license is granted or
shall be implied for any other use. Additional information may be
obtained from MPEG LA, L.L.C.
(
http://www.mpegla.com).
See
z
This product is licensed under the VC-1 Patent Portfolio License
for the personal and noncommercial use of a consumer to (i)
encode video in compliance with the VC-1 standard (henceforth
referred to as VC-1 video) and/or (ii) decode VC-1 video that
was encoded by a consumer engaged in a personal and
noncommercial activity and/or was obtained from a video
provider licensed to provide VC-1 video. No license is granted or
shall be implied for any other use. Additional information may be
obtained from MPEG LA, L.L.C.
(
http://www.mpegla.com).
See
z
The abbreviations of operating systems (Japanese versions)
below are used in this manual.
Windows 8.1 stands for Microsoft Windows 8.1, Microsoft
Windows 8.1 Pro and Microsoft Windows 8.1 Enterprise.
Windows 8 stands for Microsoft Windows 8, Microsoft
Windows 8 Pro and Microsoft Windows 8 Enterprise.
Windows 7 stands for Microsoft Windows 7 (Starter, Home
Basic, Home Premium, Professional, Enterprise and Ultimate).
Windows Vista stands for Windows Vista (Home Basic,
Home Premium, Business, Enterprise and Ultimate).
z
The Bluetooth word mark and logos are owned by the Bluetooth
SIG, INC. and any use of such marks by NTT DOCOMO, INC. is
under license. Other trademarks and trade names are those of
their respective owners.
z
Google, Google logo, Android, Google Search and Google
Search logo are trademarks of Google Inc.
93
Appendix/Index
Open source software
z
This product includes software based on GNU General Public
License (GPL), GNU Lesser General Public License (LGPL) and
other licenses.
For details on licenses of related software, in the standby
screen,
information]
z
Source codes of software based on GPL, LGPL and Mozilla
Public License (MPL) can be referred to on the following website
for free. For details, refer to the following website.
(
https://sh-dev.sharp.co.jp/android/modules/oss/) (in Japanese
only)
z
▶[Settings]▶[Other settings]▶[Device info]▶[Legal
▶[Open source licenses].
Unlocking SIM lock
z
The handset can unlock the SIM lock. Unlock the SIM lock to
use non-DOCOMO SIM cards.
z
Some services, functions, etc. may be unavailable. DOCOMO
shall not guarantee any operation of the handset.
z
For details on unlocking SIM lock, refer to the DOCOMO
website.
Insert non-DOCOMO SIM card
1
Turn the power on
2
In the screen of unlocking PIN from the SIM
3
network, enter an unlock code
Unlock ▶
4
t
94
Appendix/Index
Using mobile phone with your
manners
Please be considerate of those around you when using the
handset.
Turn off your handset in the following places
When in an area where use is prohibited
When you are on an airplane or in a hospital, follow the
instructions given by the respective airlines or medical facilities.
Turn off the handset in areas where the use of mobile phones is
prohibited.
Set Public Mode in the following places
While driving
Using the handset in hand while driving is regarded as a
punishable act.
However, some cases such as when rescuing sick and injured
people or maintaining public safety are exempted.
When in public places such as theaters, movie theaters or
museums
Using the handset in public places where you should be quiet
results in disturbing others.
Be aware of the place to use a mobile phone
and the volume of your voice and ringtone
Be aware of the volume of your voice when using the
handset in quiet places such as restaurant and hotel lobby.
Use in places where you do not block a passage in the
town.
These functions ensure manners in public
The handset has convenient functions such as setting not to
answer a call and setting to mute sound of the handset.
z
Manner mode (
Mutes sound of the handset.
* However, the manner mode cannot mute camera shutter
sound.
z
Public Mode (Phone OFF) (
When a call is received, a message stating that you are in a
place that does not allow the use of mobile phone is played and
the call is automatically disconnected.
z
Phone vibration (
Notifies you of incoming call with vibration.
z
Answering memo (
Memo")
Records callers messages when you cannot answer the call.
* Additionally, optional services such as Voice Mail Service (
P.XX "Network service"), Call Forwarding Service (☞P.
"Network service") are available.
P. 61 "Mode Settings")
☞
P. 34 "Network service")
☞
P. 61 "Sound/lamp")
☞
P. 34 "Voice Memo/Answering
☞
☞
We collect your unnecessary mobile phones
and other devices irrespective of carrier. Bring
them to a docomo Shop near you.
* Intended devices: Mobile phone, PHS, battery
pack, charger and desktop holder
(irrespective of carrier)
Check/Change the subscription,
apply for various services, and
request various information
Be considerate of the privacy of the
individuals around you
Please be considerate of the privacy of individuals around
you when shooting and sending pictures using cameraenabled mobile phones.
materials online.
z
From the handset, in the standby screen,
検索 (dmenu/Search)
docomo (support))
procedure) (in Japanese only)
z
From a PC My docomo (
)
mydocomo/
(docomo online procedure) (in Japanese only)
* You may not be able to access some website services due to
system maintenance, the content of your subscription, etc.
*Network security code or ID/Password is required to use ド
コモオンライン手続き (docomo online procedure).
)▶select an item on ドコモオンライン手続き
▶My docomo (お客様サポート) (My
▶ドコモオンライン手続き(docomo online
(
https //www.nttdocomo.co.jp/
i
▶dメニュー・
General Inquiries
docomo Information Center
Repairs
(Business hours: 9:00 a.m. to 8:00 p.m.)
0120-005-250 (toll free)
※ Service available in: English, Portuguese, Chinese,
Spanish.
※ Unavailable from part of IP phones.
(Business hours: 9:00 a.m. to 8:00 p.m. (open all year
round))
From DOCOMO mobile phones
(In Japanese only)
(Business hours: 24 hours (open all year round))
From DOCOMO mobile phones
(In Japanese only)
(No prefix) 113 (toll free)
※ Unavailable from land-line phones, etc.
From land-line phones (In Japanese only)
0120- 00-000 (toll free)
※ Unavailable from part of IP phones.
(No prefix) 151 (toll free)
※ Unavailable from land-line phones, etc.
From land-line phones (In Japanese only)
0120- 00-000 (toll free)
※ Unavailable from part of IP phones.
Please confirm the phone number before you dial.
For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or check the
docomo Shop etc. near you on the NTT DOCOMO website and contact.
.
Inquiries from overseas (In case of loss, theft, unconnected, etc.)
(Business hours 24 hours (open all year round))
From DOCOMO mobile phones
Display on the screen
(to enter + , press and hold 0 .)
※ You can call using international call access code instead of + .
- 1-3-6 32-6600 (toll free)
From land-line phones
International call access
code for the country you stay
※ You are charged a call fee to Japan.
※ For international call access codes, refer to DOCOMO website.
Please confirm the phone number before you dial.
If you lose your handset or have it stolen, immediately take the steps necessary for suspending the use of
the handset.
If the handset you purchased is damaged, bring your handset to a repair counter specified by DOCOMO
after returning to Japan.
Don t forget your mobile phone or your manners
When using your mobile phone in a public place, don t forget to show common courtesy and consideration for others around you.
- 1-3-6 32-6600 (charges apply)
Sales
Manufacturer SHARP Corporation
¶ƔVW(GLWLRQ
Ɣ
1
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.