CD-XP700H
MINI COMPONENT SYSTEM
Accessories
1
1
This Quick Guide will help you to correctly
install and operate your system.
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/support.
Customers without Internet access may telephone
08705 274277 during office hours (or (01) 676 0648
if telephoning from Ireland).
0101
Remote control × 1
AM loop aerial × 1
Remote control battery installation
2
2
Remove the
123
battery cover.
Insert the batteries
as shown.
“AA” size battery (UM/SUM-3, R6, HP-7
or similar) × 2
FM aerial × 1
Replace the cover.
CDXP700HE_QG 02.2.7, 0:06 AM1
– 1 –
TINSZ0805AWZZ 02B R HK
System connections
3
3
Before turning the power on, be sure to remove this transport screw
on the back of the unit using a flat head screwdriver or a coin.
FM aerial
AM loop aerial
Right speaker Left speaker
Wall socket
(AC 230 V, 50 Hz)
Right speaker
Red Black
CDXP700HE_QG 02.2.7, 0:06 AM2
RCA lead
(not supplied)
Left speaker
To the line
output sockets
VCR, DVD, etc.
TV
– 2 –
Turn on your system
4
4
The first time the unit is plugged
in, the unit will enter the demonstration mode. Y ou will see words
scroll.
Press the
1
EQUALIZER/X-BASS/
DEMO button to cancel
the demonstration mode.
Listening to a CD (CDs)
12 cm (5”)
8 cm (3”)
1
2, 4
6
3
1
2
3
4
5
Press the
2
ON/STAND-BY button
to turn the power on.
Press the CD button.
Press the
open the disc tray.
Place the CD(s) on the disc tray, label side up.
When loading a third disc, press the
DISC SKIP button to turn the disc
tray, then place the CD in the open
position.
Press the
close the disc tray.
To select the CD you want to listen
to first, press one of
tons on the remote control.
7 7
7 OPEN/CLOSE button to
7 7
7 7
7 OPEN/CLOSE button to
7 7
ss
ss
s 1 -
s 3 but-
ss
ss
5
Listening to the radio
1
2
FM stereo mode indicator
FM stereo receiving indicator
6
1
2
– 3 –
Press the
back.
Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM).
Press the TUNING/TIME (
button to tune in to the desired station.
When the TUNING/TIME button is
pressed for more than 0.5 seconds,
scanning will start automatically and
the tuner will stop at the first receivable broadcast station.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the
“ST” indicator.
jj
● “
j” will appear when an FM broadcast is in
jj
stereo.
0 / R 0 / R
0 / R button to start play-
0 / R 0 / R
XX
WW
X or
W)
XX
WW
CDXP700HE_QG 02.2.7, 0:06 AM3
Listening to a cassette tape (TAPE 1 or TAPE 2)
3
4
1
2
3
1, 2
4
TAPE 1 TAPE 2
■ If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly , it
may malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power
on again.
If the unit is not restored in the previous operation, un-
2.
plug and plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory
by resetting it.
Open the cassette door by pushing
the area marked “
Load a cassette into the TAPE 1 or
TAPE 2 cassette compartment with
the side to be played facing toward
you.
Press the T APE (1
lect the cassette you want to listen
to.
Press the
back.
0 / R0 / R
0 / R button to start play-
0 / R0 / R
7 7
7 PUSH EJECT”.
7 7
VV
V 2) button to se-
VV
■ Clearing all the memory (reset)
1. Press the ON/STAND-BY button to enter the power
stand-by mode.
Whilst pressing down the CLOCK button and the
2.
EQUALIZER/X-BASS/DEMO button, press the ON/
STAND-BY button until “CLEAR AL” appears.
Caution:
This operation will erase all data stored in memory including
clock, timer settings, tuner preset, and CD programme.
■
Maintenance
● Dirty heads, capstans or pinch rollers can cause poor
sound and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
● When cleaning the heads, pinch rollers, etc., unplug the
unit which contains high voltages.
● After long use, the deck’s heads and capstans may be-
come magnetised, causing poor sound. Demagenetise
these parts once every 30 hours of playing/recording time
by using a commercial tape head demagnetiser. Read the
demagnetiser’s instructions carefully before use.
● Clean the dust or stain on the CD pickup lens using a com-
mercial cleaning disc (brush type).
– 4 –
TAPE 1
TAPE 2
A Playback head
B Capstan
C Pinch roller
D Erase head
E Recording/Playback head
B
A
E
D
C
C
B
CDXP700HE_QG 02.2.7, 0:06 AM4
Loading...