SHARP CD-DH950 User Manual

ENGLISH

MODEL

CD-DH950P

MINI COMPONENT SYSTEM

OPERATION MANUAL

CD-DH950P Mini Component System consisting of CD-DH950P (main unit) and CP-DH950P (speaker system).

AND-BY

ON/ST

MENU

Y
A
L

DISP

(TV OUT)

CD

Y
A
L

DISP

TAPE

TUNER(BAND)

USB
UDIO IN
A

X-BASS

VOL

BASS/TREBLE

TUNING

MODE

Y

A

PL

FOLDER

T

PRESE

ENTER

Y

T

MEMOR

PRESE

CLOCK/TIMER

P

CLEAR SLEE

DIMMER

DEMO

MUTE

iPhone, iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.

Accessories

Please confi rm that only the following accessories are included.

Remote control x 1

(RRMCGA255AWSA)

AM loop antenna x 1

(QANTL0005AWZZ)

FM antenna x 1

(92LFANT1535A)

iPhone® adaptor x 3
(GCOVAA238AWSA - No 12)
(GCOVAA239AWSA - No 15)
(GCOVAA294AWSA - No 19)

Special Note

Supply of this product does not convey a license nor imply any right to distribute content created with this product in
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue generating
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for
such use is required. For details, please visit http://mp3licensing.com

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifi cally
to iPod or iPhone, respectively, and has been certifi ed by the developer to meet Apple performance standards. Apple
is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note
that the use of this accessory with iPod or iPhone may affect wireless performance.

Printed in Malaysia

TINSZA962AWZZ

11F R MW

1

SPECIAL NOTES

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

Explanation of Graphical Symbols:

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.

This product is classifi ed as a CLASS 1 LASER PRODUCT
Caution - Use of any controls, adjustments or procedures
other than those specifi ed herein may result in hazardous
radiation exposure.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s
attention to Article 820 of the National Electrical Code that
provides guidelines for proper grounding and, in particular,
specifi es that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable
entry as practical.

NOTE

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:

Reorient or relocate the receiving antenna. O
Increase the separation between the equipment and O
receiver.
Connect the equipment into an outlet on a circuit O
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV O
technician for help.

WARNING

FCC Regulations state that any unauthorized changes or
modifi cations to this equipment not expressly approved by
the manufacturer could void the user’s authority to operate
this equipment.

The lightning fl ash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of suffi cient
magnitude to constitute a risk of electric
shock to persons.

The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

For your assistance in reporting this unit in case of loss or theft,
please record below the model number and serial number which
are located on the rear of the unit. Please retain this information.

Model number ..............................................

Serial number ..............................................

Date of purchase ..............................................

Place of purchase ..............................................

FOR YOUR RECORDS

IMPORTANT SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but
it can also cause personal injuries and property damage
if improperly handled. This product has been engineered
and manufactured with the highest priority on safety.
However, improper use can result in electric shock and/or
fi re. In order to prevent potential danger, please observe
the following instructions when installing, operating and
cleaning the product. To ensure your safety and prolong
the service life of this product, please read the following
precautions carefully before use.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifi ers) that produce heat.

9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fi t into your outlet, consult
an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.

11) Only use attachments/accessories specifi ed by the
manufacturer.

12) Use only with the cart, stand, tripod,
bracket, or table specifi ed by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when
unused for long periods of time.

14) Refer all servicing to qualifi ed service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.

E-1

IMPORTANT SAFETY INSTRUCTIONS (continued)

Additional Safety Information

15) Power Sources - This product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or
local power company. For product intended to operate
from battery power, or other sources, refer to the
operating instructions.

16) Overloading - Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can
result in a risk of fi re or electric shock.

17) Object and Liquid Entry - Never push objects of any
kind into this product through openings as they may
touch dangerous voltage points or short-out parts that
could result in a fi re or electric shock. Never spill liquid
of any kind on the product.

18) Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualifi ed service
personnel under the following conditions:

When the AC cord or plug is damaged,a)
If liquid has been spilled, or objects have fallen b)
into the product,
If the product has been exposed to rain or water,c)
If the product does not operate normally by d)
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualifi ed technician
to restore the product to its normal operation,
If the product has been dropped or damaged in e)
any way, and
When the product exhibits a distinct change in f)
performance - this indicates a need for service.

19) Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specifi ed by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fi re, electric
shock, or other hazards.

20) Safety Check - Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product is
in proper operating condition.

21) Wall or ceiling mounting - When mounting the product
on a wall or ceiling, be sure to install the product
according to the method recommended by the
manufacturer.

22) Power Lines - An outside antenna system should not
be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing
an outside antenna system, extreme care should
be taken to keep from touching such power lines or
circuits as contact with them might be fatal.

23) Protective Attachment Plug - The product is equipped
with an attachment plug having overload protection.
This is a safety feature. See Instruction Manual
for replacement or resetting of protective device.
If replacement of the plug is required, be sure the
service technician has used a replacement plug
specifi ed by the manufacturer that has the same
overload protection as the original plug.

24) Stand - Do not place the product on an unstable

E-2

cart, stand, tripod or table. Placing the product on an
unstable base can cause the product to fall, resulting
in serious personal injuries as well as damage to the
product. Use only a cart, stand, tripod, bracket or
table recommended by the manufacturer or sold with
the product. When mounting the product on a wall,
be sure to follow the manufacturer’s instructions. Use
only the mounting hardware recommended by the
manufacturer.

Precautions

General Q

Please ensure that the equipment is positioned in a O
well ventilated area and ensure that there is at least
4" (10 cm) of free space along the sides, top and back
of the equipment.

4" (10 cm) 4" (10 cm)

5

4

3

5

2

4

1

3

2

1

MINI COMPONENT SYSTEM

CD-DH950P

REMOTE

TIMER

SENSOR

TIMER

POWER

ON/ STAND-BY

OPEN / CLOSE

VOL.

VOL.

iPod/iPhone

CD

5

5

CD

4

4

TUNER

3

(BAND)

3

TAPE

TUNING

PRESET

2

2

AUDIO IN

USB

1

1

RECORD/PLAYBACKPLAYBACK (PLAY & STOP)

AUDIO

PHONES

IN

The unit will start the tape initialization when plugged O
in to the AC outlet. During this process, initializing
sound will be heard and the unit cannot be turned on.
Wait until the process is fi nished.
Use the unit on a fi rm, level surface free from O
vibration.
Place the speakers at least 12" (30 cm) away from O
any CRT TV to avoid color variations across the TV
screen. If the variations persist, move the speakers
further away from the TV. LCD TV is not prone to such
variation.
Keep the unit away from direct sunlight, strong magnetic O
fi elds, excessive dust, humidity and electronic/electrical
equipment (home computers, facsimiles, etc.) which
generate electrical noise.
Do not place anything on top of the unit. O
Do not expose the unit to moisture, to temperatures O
higher than 140˚F (60˚C) or to extremely low
temperatures.
If your system does not work properly, disconnect the O
AC power cord from the AC outlet. Plug the AC power
cord back in, and then turn on your system.
In case of an electrical storm, unplug the unit for O
safety.
Hold the AC power plug by the head when removing O
it from the AC outlet, as pulling the cord can damage
internal wires.
The AC power plug is used as a disconnect device and O
shall always remain readily operable.

Do not remove the outer cover, as this may result O
in electric shock. Refer internal service to your
local SHARP service facility.

This unit should only be used within the range of O
41˚F - 95˚F (5˚C - 35˚C).

4" (10 cm)

4" (10 cm)

For U.S. customer only

CONSUMER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
"Product"), when ship in its original container, will be free from defective workmanship and materials, and agrees that it will,
at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent
at no charge to the purchaser for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below
nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or
other misuse, abnormal service or handling, or which has been altered or modified in design or construction.

In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide
proof of purchase to the servicer.

The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law.
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE
LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow
limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.

The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused
by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any
way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion
of incidental or consequential damages, so the above exclusion may not apply to you.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE.

Model Specific Section

Your Product Model Number & Description:

Warranty Period for this Product:

Additional Item(s) Excluded from Warranty Coverage
(if any):

Where to Obtain Service:

What to do to Obtain Service:

CD-DH950P Mini Component System

(Be sure to have this information available when you need
service for your Product.)

One (1) year parts and labor from the date of purchase.

Non-functional accessories, supplies, and consumable
items.

At a Sharp Authorized Servicer located in the United States.
To find a location of the nearest Sharp Authorized Servicer,
call Sharp toll free at 1-800-BE-SHARP.

Ship prepaid or carry in your Product to a Sharp Authorized
Servicer. Be sure to have Proof of Purchase available. If
you ship the Product, be sure it is insured and packaged
securely.

TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07495-1163

Precautions (continued)

Warning:

The voltage used must be the same as that specifi ed on
this unit. Using this product with a higher voltage other than
that which is specifi ed is dangerous and may result in a fi re
or other type of accident causing damage. SHARP will not
be held responsible for any damage resulting from use of
this unit with a voltage other than that which is specifi ed.

Volume control Q

The sound level at a given volume setting depends on
speaker effi ciency, location and various other factors. It is
advisable to avoid exposure to high volume levels, which
occurs while turning the unit on with the volume control
setting up high, or while continually listening at high
volumes. Excessive sound pressure from earphones and
headphones can cause hearing loss.

System connection

Speaker connection Q

Use speakers with an impedance of 6 ohms or more, O
as lower impedance speakers can damage the unit.
Do not make a mistake when connecting the right and O
left speakers. The right speaker is the one on the right
side when you face the unit.
Insert the speaker plug fully with the lever side facing O
to the top.
Hold the speaker plug when removing it from the unit. O
Pulling the wire may cause malfunction to the unit.

Do not stand or sit on the speakers. You may be O
injured.
Do not allow any objects to fall into or to be placed in O
the bass refl ex duct.

E-3

System connections (continued)

Make sure to unplug the AC power cord before making any connections.

To video input
jack

TV

Plug in with
the lever side
facing to the
top.

Wire

AC outlet (AC 120 V ~ 60 Hz)

Remote control

Battery installation Q

Use 1 “AA” size battery (UM/SUM-3, R6, HP-7 or
similar). Battery is not included.

Open the battery cover.

1

Insert the battery according to the direction indicated 2
in the battery compartment.
When inserting or removing the battery, push it toward
the battery terminal.
Close the battery cover.3

Video cable
(not supplied)

FM antenna

External FM
antenna for
better reception
(not supplied)

AM loop antenna

Caution:

Remove the battery if the unit will not be used for a O
long period of time. This will prevent potential damage
due to battery leakage.

Do not use rechargeable batteries (nickel-cadmium O
battery, etc.).

Installing the battery incorrectly may cause the unit to O
malfunction.

Batteries (battery pack or batteries installed) shall not O
be exposed to excessive heat such as sunshine, fi re
or the like.

Notes concerning use:

Replace the battery if the operating distance is reduced O
or if the operation becomes erratic.

Periodically clean the transmitter on the remote control O
and the sensor on the unit with a soft cloth.

Exposing the sensor on the unit to strong light may O
interfere with operation. Change the lighting or the
direction of the unit.

Keep the remote control away from moisture, heat, O
shock, and vibrations.

E-4