SHARP ARPB8 Configuration Report and Test Page

DATA

ON LINE MENU ITEM

ENTER

DATA

ON LINE MENU ITEM

ENT

DATA

ON LINE MENU ITEM

ENT

DATA

NE MENU ITEM

ENTER

AR-PB8

[6] CONFIGURATION REPORT AND TEST PAGE

To test print the configuration page and font list, use the following procedure:

1) Press the ON LINE key to switch the printer to the offline mode.

3) Press the ITEM key to display the required item.

2) Press the MENU key to display the Test Menu.

1. Samples

Printer Configuration Page

Machine Information

Language:

Hardware Specs

Base Memory: Total Memory: Network Board:

Version Information

PCL6:

Input Paper Trays

Bypass Tray: Tray 1: Tray 2: Tray 3: Tray 4:

4) Press the ENTER key.

HARDWARE STATUS

The test page prints.

English

8MB 8MB Not Installed

1.00

-SizePaper Inserted Letter (8.5x11) Letter (8.5x11R) Legal (8.5x14) Ledger (11x17)

KEY MENU STATUS

Main Menu

Copies: Resolution: Smoothing: Toner Save: Paper Source: Paper Size: Orientation: Emulation:

PCL is a registered trademark of Hewlett-Packard Cmpany. All other trademarks and copyrights are the property of their respective owners.

1 600dpi On Off Auto Letter (8.5x11) Portrait PCL

Interface Menu

I/O Time Out 60 sec.

6 – 1

AR-PB8

2. Items and contents

A. Hardware status

(Machine information)

a. Language Value: (English/French/German/Italian/Dutch/Spanish/Swedish) Example: English Default: Depends on the Destination setting Description:Depends on the LCD display, the configuration page, and

the font list language.

(Hardware specifications)

a. Base memory Value: 8MB Example: 8MB Default: 8MB Description:Indicates the printer PWB base memory capacity.

b. Total memory Value: (8, 24, 40, 56, 72, 88, 104, 136MB) Example: 8MB Default: 8MB Description:Indicates the printer PWB total memory capacity, which is

the total of the base memory and the option memory.

c. Network board Value: Example: Not Installed. Default: Not Installed. Description:Ubducates the network board installation status.

(Firmware version)

a. PCL6 Value: #.## Example: 1.00 Default: Depends on the printer firmware version.

Available Paper Size

Appearance on Configuration Page Description

Letter (8 1/2 × 11) Letter/Long Edge Feed

Letter (8 1/2 × 11R) Letter/Short Edge Feed

Legal (8 1/2 × 14) Legal/Short Edge Feed

Ledger (11 × 17) Ledger/Short Edge Feed

Executive (7 1/4 × 10 1/2) Executive/Short Edge Feed

Invoice (5 1/2 × 8 1/2) Invoice/Long Edge Feed

Foolscap (8 1/2 × 13) Foolscap/Short Edge Feed

A4 A4/Long Edge Feed

A4R A4/Short Edge Feed

B5 B5/Long Edge Feed

B5R B5/Short Edge Feed

B4 B4/Short Edge Feed A3 A3/Short Edge Feed A5 A5/Long Edge Feed A6 A6/Short Edge Feed

(Unknown) Other size (EXTRA) (No Paper)

(No Tray)

(Tray Open)

a. Manual paper feed tray Value: (Suitable paper size) Example: Letter (8 1/2 × 11") Default: Depends on the size of paper set on the manual paper

feed tray.

Description:Indicates the size of paper set on the manual paper feed

tray. Depends on the paper size detected on the manual paper feed tray. “Unclear” means that the paper size is not detected. If there is no paper, no print is made here.

No paper availadle on this tray.

There is a problem with this tray.

This tray is opened (except Bypass-Tray) or Tray is lifting up.

b. Tray1, tray 2, tray 3, tray 4 Value: (Suitable paper size) Example: Letter (8 1/2 × 11") Default: Depends on the paper tray configuration. Description: Indicates the paper size configuration of tray 1, tray 2,

tray 3, tray 4.

6 – 2