SHARP ARPB8 Printer Driver Configuration

[5] SIMULATION

1. Entering the simulation mode

Perform the following procedure to enter the simulation mode.
Clear key → Interruption key → “0” key → Interruption key → Main

code → Start key → Sub code → Start key

2. Cancelling the simulation mode

When the all clear key is pressed, the simulation mode is cancelled.
When the interruption key is pressed, the process is interrupted and

the screen returns to the sub code entering display.

3. Contens of Simulations

AR-PB8

Main
code

22 18 Printer counter display Used to display the current printer counter value. ∗1
24 9 Printer counter clear Used to clear the printer counter. ∗2
67 14 Printer Flash ROM The machine enters the version up mode of the printer PWB flash ROM.

∗1: Each counter display method

∗2: Display after clearing each counter

Sub

code

Data Download For details, refer to the printer PWB flash ROM version up procedure

To display 123456: 123 (0.75 sec) → Blank (0.35sec) → 456 (0.75 sec) → Blank (1.0 sec) → repetition

000 (0.75 sec) → Blank (0.35sec) → 000 (0.75 sec) → Blank (1.0 sec) → Repetition

Contents Details of operation

described later.

Initial
value

Set range

5 – 1