SHARP AR-DU3, AR-DU4pg PARTS GUIDE

PARTS GUIDE

AR-DU3

AR-DU4

CO D E:00ZARD U 4//P1/

両面モジュール

LASER PRINTER OPTIONS AUTO DUPLEX MODULE

AR-DU3

MODEL AR-DU4

CONTENTS

1 (Exteriors)

2 (Rear frame section)

3 (Multi manual paper feed unit)(AR-DU4)

4 (Multi manual paper feed tray unit)(AR-DU4)

5 (Paper transport unit)

6 & (Packing & Materials)(AR-DU3)

7 & (Packing & Materials)(AR-DU4)

■(Index)

	This document has been published to be
	SHARP CORPORATION used for after sales service only.
	The contents are subject to change without
	notice.

:

::

:

::

パーツ名:

:

:

DEFINITION

The definition of each Rank is as follows and also noted in the list A : Parts necessary to be stocked as High usage parts.

B : Parts necessary to be stocked as Standard usage parts. C : Low usage parts.

D : Parts necessary for refurbish.

E : Unit parts recommended to be stocked for efficient after sales service.

Please note that the lead time for the said parts may be longer than normal parts. S : Consumable parts.

Please note that the following parts used in Copier under the same description are classified into A or B Rank depending upon the place used.

Example : Gear made of Metal, Sprocket, Bearing, Belt made of Rubber, Spring clutch mechanism.

A Rank	: The parts which may be with the revolution or loading.
B Rank	: Parts similar to A Rank parts, but are not included in Rank A.

!

Because parts marked with “!” is indispensable for the machine safety maintenance and operation, it must be replaced with the parts specific to the product specification.

F

F Other than this Parts Guide, please refer to documents Service Manual (including Circuit Diagram) of this model.

F Please use the 13 digit code described in the right hand corner of front cover of the document, when you place an order. F For U.S. only-Use order codes provided in advertising literature. Do not order from parts department.

1 (Exteriors)

NO.	PARTS CODE	PRICE RANK		NEW	PART		DESCRIPTION
		Ex.	Ja.	MARK	RANK
1	PCOVP1571FCZZ	BD	GJ	N	D	ADU cover upper	ADU
2	XHBSE40P10000	AA	DD		C	Screw (4×10)
3	PCOVP1568FCZ1	BA	FX	N	D	ADU cover front	ADU F
4	0EUHLD0218C//	AE	DJ	N	C	Mini clunp (MWSET2-1-01)
5	DHAI-3211FCZZ	AL	EB	N	C	ADU delivery sensor harness	ADU
6	QSW-Z0531FCZZ	AL	EB	N	B	Delivery jum sensor
7	XRESP50-06000	AA	DD		C	E type ring	E
8	NSFTZ2613FCZZ	AS	EQ	N	C	Delivery roller shaft
9	NROLP1214FCZ1	AD	DJ		C	Delivery support roller upper
10	XHPSD30P80XB0	AD	DJ		C	Screw (3×6)
11	LPLTM5802FCZ1	AL	EB	N	C	Delivery reinforce plate
12	XEBSE30P08000	AA	DD		C	Screw (3×8)
13	PBRSS0210FCZZ	BE	GN	N	B	Delivery discharger blass
14	XEBSE40P12000	AA	DD		C	Screw (4×12)
15	LHLDZ1469FCZZ	AE	DJ	N	C	Upper transport fulcrum holder	-
16	XHBSE40P08000	AA	DD		C	Screw (4×8)	(AR-DU4)
17	PCOVP1574FCZ1	AS	EQ	N	D	Manual paper feed cover front	(AR-DU4) F
19	GDOR-0031FCZ2	BP	LP	N	D	ADU open/close door	ADU
21	PMAGT0072FCZZ	AF	DS		C	Magnet catch (1.5KG)
22	MARMP0263FCZZ	AF	DS	N	C	Open/close door arm
23	PCOVP1605FCZZ	BA	FX	N	D	Manual paper feed back cover	(AR-DU4)
24	PSHEZ4908FCZZ	AC	DJ	N	C	Tray harness fixing sheet	(AR-DU4)
25	NSFTZ2661FCZZ	AV	FG	N	C	Tray support shaft	(AR-DU4)
26	LPLTM5899FCZZ	AG	DS	N	C	Tray fulcrum plate	(AR-DU4)
27	XRESP40-06000	AA	DD		C	E type ring	(AR-DU4) E
28	MSPRD2967FCZZ	AL	EB	N	C	Tray fulcrum spring	(AR-DU4) SP
29	PCOVP1575FCZ1	AU	EZ	N	D	Manual paper feed cover rear	(AR-DU4) R
30	PCOVP1569FCZ1	BA	FX	N	D	ADU cover rear	ADU R
31	MSPRC2885FCZZ	AB	DJ	N	C	Delivery support spring	SP
32	XHBSE40P12000	AA	DD		C	Screw (3×12)	(AR-DU3)
33	TLABZ4450FCZZ	AF	DS	N	D	ADU caution label	(AR-DU3) ADU
34	PCOVP1570FCZ3	BH	GX	N	D	ADU cover lower	(AR-DU3) ADU
35	LSOU-0179FCZZ	AR	EQ	N	C	Delivery tray 1	(AR-DU4) 1
36	LSOU-0177FCGZ	AP	EQ	N	C	Delivery tray T	(AR-DU4) T
37	XEBSE40P10000	AA	DD		C	Screw (4×10)	(AR-DU4)

– 1 –

1 (Exteriors)

14

2

30

2

29

16

28

25

26

27

16

	2	3		31
	1			5
					7	9
				6
		4		7	8
			31			10
	2	7	7	9		11
	14	8
	2		9
					12
4	14	9				13
				12
		17		13
	2		12
	15		19			12

21

16

12

21

22

16

16	24
23	37
37

37

16

35

34

36

32

33

FCP04881

– 2 –

2 (Rear frame section)

NO.	PARTS CODE	PRICE RANK		NEW	PART		DESCRIPTION
		Ex.	Ja.	MARK	RANK
1	MSPRC2982FCZZ	AC	DJ	N	C	ADU earth spring T1	ADU SP T1
2	VHPGP1A73A+-1	AG	DX		B	Photo sensor (GP1A73A)
3	LX-BZ0913FCZZ	AE	DJ	N	C	ADU fixing screw	ADU
4	LPLTM5800FCZZ	AP	EQ	N	C	Body fixing plate upper
5	XHBSE40P10000	AA	DD		C	Screw (4×10)
6	XEBSE40P10000	AA	DD		C	Screw (4×10)
7	NSFTZ2610FCZ1	AT	EZ	N	C	Support roller shaft
8	NROLP0896FCZZ	AC	DD		C	Transport support roller
9	MSPRT2882FCZZ	AC	DJ	N	C	Support roller spring T2	SP T2
10	QSW-Z0526FCZZ	AZ	FQ	N	B	ADU paper stop position 1 sensor	ADU 1
12	MSPRD2966FCZZ	AC	DJ	N	C	Actuator spring T4	SP T4
13	MLEVP0808FCZZ	AL	EB	N	C	Delivery actuator
14	DHAI-3214FCZZ	AM	EG	N	C	ADU transport sensor harness	ADU
15	CPWBN1475FC31	BN	HZ	N	E	ADU drive PWB	ADU
16	XEBSE30P08000	AA	DD		C	Screw (3×8)
17	DHAI-3255FCZZ	AH	DX	N	C	ADU stop position 2 harness	ADU 2
18	PSHEZ4899FCZZ	AP	EQ	N	C	ADU PWB cover sheet	ADU
19	LX-WZ2028SCZZ	AA	DD		C	Washer (φ3x12)
20	LHLDW1500FCZZ	AC	DJ	N	C	Twist lock (TL-350)
21	XWHSD30-08100	AA	DD		C	Washer
22	LHLDZ1481FCZZ	AG	DX	N	C	Support roller holder T4	T4
23	MSPRC2881FCZZ	AB	DJ	N	C	Support roller spring T1	SP T1
24	NSFTZ2669FCZZ	AY	FQ	N	C	Support roller shaft T4	T4
25	LHLDW1489FCZZ	AC	DJ	N	C	Micro wire saddle (MWSEA2-3-01)
26	XRESP50-06000	AA	DD		C	E type ring	E
27	NROLP1356FCZZ	AG	DX	N	C	Support roller D	D
28	0EUHLD0309G//	AD	DJ		C	Micro wire saddle (MWSEA2-4-01)
29	DHAI-3237FCZZ	AZ	FQ	N	C	ADU paper feed interface harness	(AR-DU4) ADU
31	XHBSE30P06000	AA	DD		C	Screw (3×6)
32	MSPRD2986FCZZ	AE	DS	N	C	ADU earth spring T4	ADU SP T4
33	LPLTM5801FCZZ	AH	DX	N	C	Body fixing reinforce plate lower
34	MSPRD2985FCZ2	AF	DS	N	C	ADU earth spring T2	ADU SP T2
35	DHAI-3213FCZZ	BB	GD	N	C	ADU body interface harness	ADU
36	LBNDJ0071FCZZ	AC	DJ		C	Wire band
37	LBNDJ0014FCZ1	AB	DJ		C	Wire band
38	PGSK-0052FCZZ	AH	DX		C	ADU cushion A	ADU A
39	0EUCOR0307L//	AP	EQ		C	Core
40	LBNDJ0013FCZ1	AA	DJ		C	Wire band

2 (Rear		frame section)
		2				3
						4
							5
	1
				3		38	6
					6	7	19		9
								16
					38		8
				6
						19	8
				5
						16			9
				5		9	8 19	16
									37
								37
		28		10					35	39
							8
			2	13		19 16	14		36	40
						9
				12			20
						21
				22
						16
				25					15
									16
				28
5					23
		5		29			16		6
34				24
		16				8			17
5	33	32				26				18
		31				27			6
	5
						8 26

FCP04882

– 3 –

3 (Multi manual paper feed unit)(AR-DU4)

NO.	PARTS CODE	PRICE RANK		NEW	PART		DESCRIPTION
		Ex.	Ja.	MARK	RANK
1	PGIDM1907FCZZ	AH	DX	N	C	Manual paper feed gate
2	PMLT-1268FCZZ	AB	DJ	N	C	Pick up soundproof cution
3	XHBSE40P08000	AA	DD		C	Screw (4×8)
4	XEBSE40P08000	AA	DD		C	Screw (4×6)
5	LPLTM5805FCZZ	AV	FG	N	C	Paper feed reinforce plate
6	LPLTM5907FCZZ	AP	EQ	N	C	Manual paper feed sensor fixing plate
7	XHBSD30P08000	AA	DD		C	Screw (3×8)
8	LSTYP0282FCZ2	BA	FX	N	C	Paper feed support plate
9	VHPGP1A73A+-1	AG	DX		B	Photo sensor (GP1A73A)
10	PCOVP1573FCZZ	AP	EQ	N	D	Sensor cover
11	PCOVP1603FCZ1	AY	FQ	N	D	Roller cover
12	MSPRD2886FCZ1	AC	DJ	N	C	Manual actuator spring	SP
13	MLEVP0839FCZZ	AL	EB	N	C	MPF paper detect actuator	MPF
14	XRESP50-06000	AA	DD		C	E type ring	E
15	NROLR1317FCZZ	AP	EQ	N	C	Separate roller
16	NPLYZ0397FCZZ	AK	DX	N	C	Paper feed roller pulley (28P)
17	NBLTH0357FCZZ	AK	DX	N	B	Belt
18	NBRGC0136FCZZ	AC	DD		C	Bearing (B-F6-63)
19	NROLR1312FCZZ	AN	EG	N	C	Pick up roller
20	NPLYZ0398FCZZ	AC	DJ	N	C	Pick up roller pulley (22P)
21	NSFTZ2616FCZZ	AS	EQ	N	C	Pick up shaft
22	LHLDZ1483FCZZ	AF	DS	N	C	Paper feed rotate plate
23	XRESP40-06000	AA	DD		C	E type ring	E
24	MSPRT2889FCZ2	AC	DJ	N	C	Pick up spring	SP
25	LPLTM5806FCZZ	AP	EQ	N	C	Link fixing plate
26	XEBSD30P08000	AA	DD		C	Screw (3×8)
27	MARMP0265FCZZ	AE	DS	N	C	Pick up link arm
28	MARMP0264FCZ1	AH	DX	N	C	Pick up arm
29	MSPRT2888FCZ2	AC	DJ	N	C	Munual solenoid spring	SOL SP
30	NSFTZ2614FCZ1	AU	EZ	N	C	Paper feed shaft
31	DHAI-3239FCZZ	AL	EB	N	C	MPF paper feed detect harness	MPF
32	XEBSD40P12000	AA	DD		C	Screw (4×12)
35	LSTYP0283FCZZ	AU	FG	N	C	Tray support plate F	F
36	PSHEP4889FCZZ	AC	DJ	N	C	Paper feed PG sheet	PG
37	PSHEZ4960FCZZ	AQ	EQ	N	C	Pick up pad
38	PGIDM1955FCZ1	AQ	EQ	N	C	Pad front PG	PG
39	LDAIU0629FCZ3	BC	GJ	N	D	Paper feed base
40	RPLU-0338FCZZ	AW	FG	N	B	ADU gate solenoid	ADU
41	MARMP0266FCZZ	AE	DS	N	C	Stopper link arm
42	MSPRD2890FCZZ	AC	DJ	N	C	Stopper spring	SP
43	PSHT-0091FCZZ	BA	FX	N	C	Shutter
44	PMLT-1267FCZZ	AA	DJ	N	C	Shutter soundproof cushion
45	MSPRC2983FCZZ	AC	DJ	N	C	Shutter fixing spring	SP
46	LDAIU0630FCZZ	AF	DS	N	D	Separate pad base
47	MLEVP0810FCZZ	AG	DX	N	C	Presure lever
48	MSPRC2887FCZ1	AC	DJ	N	C	Separate spring	SP
49	MSPRP2970FCZZ	AE	DJ	N	C	Protection plate spring
50	LPLTM5804FCZZ	AF	DS	N	C	Separate spring plate
51	XEBSE40P08000	AA	DD		C	Screw (4×8)
52	DHAI-3215FCZZ	AS	EZ	N	C	MPF paper feed harness	MPF
53	LSTYP0284FCZ2	AU	FG	N	C	Tray support plate R	R
55	XBPSD30P05KS0	AA	DD		C	Screw (3×5)
56	RPLU-0342FCZZ	AZ	FQ	N	B	MPF pick up solenoid	MPF
58	PCLC-0304FCZZ	AY	FQ	N	B	MPF paper feed clutch	MPF
59	LFRM-1035FCZZ	AG	DX	N	D	Clutch frame
60	0EUHLD0218C//	AE	DJ	N	C	Mini clunp (MWSET2-1-01)
61	NGERH1402FCZZ	AF	DS	N	C	Manual paper feed joint gear (20T)
62	NGERH1403FCZZ	AG	DX	N	C	Gear (17/24T)
63	MARMP0281FCZZ	AW	FG	N	C	Manual paper feed joint arm
64	MSPRD2891FCZZ	AC	DJ	N	C	Separate spring	SP
66	PSHEZ4864FCZZ	AE	DJ	N	C	Separate pad
67	PMLT-1275FCZZ	AA	DJ	N	C	Paper feed base soundproof cushion

– 4 –