General Notes................................................................. 170
Introduction
3
About the User Guide
Thank-you for purchasing this product.
Before Using This Product
Read "Safety Precautions" thoroughly beforehand for proper
usage.
Accessible services may be limited by subscription contract
conditions.
Descriptions in the User Guide
In the User Guide, most operation descriptions are based on
handset at time of purchase.
Unless noted otherwise, descriptions are for Home Screen.
"Confirmation" refers to a window that appears after
operation, such as authentication prompt window, selection
window or caution window.
Some operation descriptions may be omitted.
Screenshots & Key Labels
Accessing Instructions on Handset
View instructions in Guide when unsure of operation or have a
question.
Also, access the FAQ site.
Launching Guide
In Home Screen, Flick Hot Sheet up
App list opens.
Introduction
Screenshots in the User Guide may differ in appearance with
actual Display. Key labels in the User Guide are simplified for
description purposes and differ with actual Display.
Other Notations
In the User Guide, the product is referred to as "handset."
microSD™/microSDHC™/microSDXC™ Card is referred to as "SD
Card."
"605SH" here refers to this mobile phone "AQUOS R."
(SoftBank)(Guide)
Guide top screen opens.
・
Information on usage of(Guide) appears at initial
startup. Follow onscreen prompts.
AQUOS R
4
Showing Status Bar Indicator
Show indicator to launch Guide from Notifications Window.
In Home Screen, Flick Hot Sheet up
App list opens.
(SoftBank)(Guide)
Launching Guide from Notifications
Window
Launch the Guide quickly for how to use functions, etc. when
indicator is set to appear.
Importing Data from Other Mobiles............................... 18
6
Package Contents
Package Contents
・Handset (AQUOS R)
・Battery is built into handset.
・Handset back cover is not removable.
・ROBOQUL (desktop holder) (SHEGH1)
・USIM Removal Tool (Complimentary sample)
・TV Antenna Cable (Complimentary sample)
・クイックスタート (Japanese)
・お願いとご注意 (Japanese)
・Warranty (Handset/ROBOQUL)
Parts & Functions
Handset (Front)
NameDescription
Front
Camera
Display
Fingerprint
Sensor
Proximity/
Light Sensor
Earpiece
Charging/
Notification
Lamp
Use to shoot photos or videos of yourself.
Touchscreen-type display; operate with
your fingers on
Display.
Use fingerprint authentication to unlock
screen, or use as Home key.
Proximity Sensor prevents Touchscreen
misoperation during calls. Light Sensor
adjusts Display brightness according to
ambient light.
Hear the other party's voice here.
Illuminates while charging or for missed
calls and notifications.
7
Handset (Back and Sides)
NameDescription
Mic
(Recorder Mic)
Camera
Mobile
Light
FeliCa mark
External
Connection
Jack
Mic/
Recorder Mic
Earphones-
Microphone
Jack
Card Tray
Speaker
Use while recording videos or when talking
through Speakerphone.
Make sure not to cover Recorder Mic.
Shoot photos or videos.
Use as a camera flash, flashlight, etc.
Hold up to reader/writer to use NFC/
Osaifu-Keitai®.
Connect ROBOQUL, AC Adaptor, etc.
Talk to the other party here. Also use
while recording videos or when talking to
emopa.
Make sure not to cover Mic/Recorder Mic.
Connect TV Antenna Cable or Earphones
with Mic (sold separately) here.
Insert/remove SD Card and USIM Card.
Listen to music, video sound, TV, etc.
Handset Keys
USIM Card
USIM Card is an IC card containing phone number and other
customer information.
Getting Started
Handling USIM Card
・See instructions included with USIM Card for handling.
・Avoid applying labels. May damage USIM Card.
・USIM is replaceable (at cost) in case of loss/damage.
・Wipe clean with a dry, soft cloth.
・Always keep the IC (gold) chip clean.
IC (gold) chip
USIM Card Cautions
Observe the following when using USIM Card.
・Always follow emergency procedures to suspend service if
your USIM Card or handset (USIM Card inserted) is lost/
stolen. For details, contact Customer Service.
・Customer is responsible for any damage caused by
inserting USIM Card in an other-brand IC card reader, etc.
SoftBank Corp. is not responsible in such case.
・It is recommended that you back up information that is
saved on USIM Card. SoftBank Corp. is not responsible for
damages from saved information that is lost.
・Always power off handset before inserting/removing
USIM Card.
・Note that USIM Card specifications and performance may
change without notice.
・Return USIM Card to SoftBank Corp. when canceling
subscription.
・USIM Card is the property of SoftBank Corp.
・Returned USIM Cards are recycled for environmental
purposes.
NameDescription
Volume Up
Key
Volume
Down Key
(Power Key)
Increase volume.
Decrease volume. Long Press in lock screen
to activate/cancel Manner mode.
Turn Display off/on. Long Press for power
on/off or reboot.
AQUOS R
8
Inserting USIM Card
Always power off beforehand.
・Set USIM Card in Card Tray beforehand. Do not insert USIM
Card without setting it in Card Tray.
With Display upward, insert USIM Removal Tool in removal hole
in Card Tray
・Press firmly and straight until Card Tray ejects.
Pull out Card Tray
Removing USIM Card
Always power off beforehand.
With Display upward, insert USIM Removal Tool in removal hole
in Card Tray
・Press firmly and straight until Card Tray ejects.
Pull out Card Tray
・With Display upward, pull out Card Tray. Pulling out Card
Tray with Display downward or handset held upright can
allow USIM Card and SD Card to fall from Card Tray and
become misplaced.
・Do not pull Card Tray forcefully or at an angle; damage may
result. Gently pull Card Tray out horizontally.
Set USIM Card in Card Tray
・Place gently, noting orientation of USIM Card (notch/IC
(gold) chip facing down).
・Make sure USIM Card is in Card Tray. Inserting Card Tray
with USIM Card on its edge may cause damage.
Insert Card Tray in USIM/SD Card Slot
・With Display upward, pull out Card Tray. Pulling out Card
Tray with Display downward or handset held upright can
allow USIM Card and SD Card to fall from Card Tray and
become misplaced.
・Do not pull Card Tray forcefully or at an angle; damage may
result. Gently pull Card Tray out horizontally.
Remove USIM Card
Insert Card Tray in USIM/SD Card Slot
・Do not insert Card Tray upside down.
・Insert gently all the way horizontally in direction shown.
・Push Card Tray firmly where circled (○) so that there is no
gap between handset and Card Tray.
・Do not insert Card Tray upside down.
・Insert gently all the way horizontally in direction shown.
・Push Card Tray firmly where circled (○) so that there is no
gap between handset and Card Tray.
SIM-Unlocking Handset
Handset can be SIM-unlocked. SIM-unlocking handset allows
other-carrier SIM cards to be used with it.
・Some services, functions, etc. may have restrictions when
an other-carrier SIM card is used. SoftBank Corp. does not
guarantee operation whatsoever.
・For details on SIM unlocking, see SoftBank Website.
9
Internal Storage and SD Card
Handset supports SD Card up to 256 GB. Some SD Cards may
not operate properly.
Internal storage can be used for saving data including system
data, applications, and video and photos taken with Camera.
Internal Storage/SD Card Cautions
Data on Internal Storage/SD Card
Data on internal storage/SD Card may be lost/altered
due to accidents, malfunctions, repairs, handset upgrade/
replacement, mishandling, etc. Back up important data
regularly. SoftBank Corp. is not liable for any damages
resulting from loss/alteration of data.
・Do not insert or remove SD Card forcefully.
・Do not touch terminals or expose them to metal objects.
・Never power off while reading or writing data.
・Make sure not to erase or overwrite data accidentally.
Cards). microSDXC Cards are supported by SDXC-compatible
devices only.
Inserting SD Card
Always power off beforehand.
・Set SD Card in Card Tray beforehand. Do not insert SD Card
without setting it in Card Tray.
With Display upward, insert USIM Removal Tool in removal hole
in Card Tray
・Press firmly and straight until Card Tray ejects.
Pull out Card Tray
Getting Started
Exchanging Data with Non-SDXC-Compatible
Devices
To exchange data between handset and non-SDXC-
compatible devices, use SD Cards (microSD/microSDHC
Cards) supported by handset and those devices. Inserting a
microSDXC Card used on handset in a non-SDXC-compatible
device may corrupt card data. In such cases, do not format
the microSDXC Card on that device even if prompted to do
so.
Formatting deletes all microSDXC Card data and changes
the file system. The original storage capacity may
be unavailable after formatting. To use a corrupted
microSDXC Card, format it on an SDXC-compatible device.
Save Location
By default, data, including photos and videos taken
with handset, is saved in internal storage. Even with
downloaded commercially-available applications described
as saving data on SD Card, data is saved in internal
storage.
・To save photos and videos taken with handset on SD
Card, insert SD Card before using Camera, then change
save location as follows.
In Home Screen, Flick Hot Sheet up(Camera)
COMMONSave TomicroSD
・With Display upward, pull out Card Tray. Pulling out Card
Tray with Display downward or handset held upright can
allow USIM Card and SD Card to fall from Card Tray and
become misplaced.
・Do not pull Card Tray forcefully or at an angle; damage may
result. Gently pull Card Tray out horizontally.
Set SD Card in Card Tray
・Place gently, noting orientation of SD Card (terminal side
facing down).
・Make sure SD Card is in Card Tray. Inserting Card Tray with
SD Card on its edge may cause damage.
Insert Card Tray in USIM/SD Card Slot
SD Card Caution
Keep SD Card away from infants; may cause choking if
swallowed.
・Do not insert Card Tray upside down.
・Insert gently all the way horizontally in direction shown.
・Push Card Tray firmly where circled (○) so that there is no
gap between handset and Card Tray.
AQUOS R
10
Formatting SD Card
When using a new SD Card for the first time, always format it
on handset.
・Formatting erases all data on SD Card. Format SD Card with
caution.
・When formatting, keep handset charged or charge it
adequately beforehand.
・Insert SD Card beforehand. See "Inserting SD Card" for
details.
In Home Screen, Flick Hot Sheet up(Settings)
Storage
Format
ERASE & FORMAT
Enter Operation PasswordOK
microSD
Storage settings
・If Operation Password is unset, follow onscreen prompts.
DONE
All data on SD Card is erased.
11
Unmounting SD Card
In Home Screen, Flick Hot Sheet up(Settings)
Storage
Removing SD Card
Always unmount SD Card beforehand.
Getting Started
With Display upward, insert USIM Removal Tool in removal hole
in Card Tray
・Press firmly and straight until Card Tray ejects.
Pull out Card Tray
SD Card is unmounted.
・
To mount SD Card again, microSDMOUNT .
・With Display upward, pull out Card Tray. Pulling out Card
Tray with Display downward or handset held upright can
allow USIM Card and SD Card to fall from Card Tray and
become misplaced.
・Do not pull Card Tray forcefully or at an angle; damage may
result. Gently pull Card Tray out horizontally.
Remove SD Card
Insert Card Tray in USIM/SD Card Slot
・Do not insert Card Tray upside down.
・Insert gently all the way horizontally in direction shown.
・Push Card Tray firmly where circled (○) so that there is no
gap between handset and Card Tray.
AQUOS R
12
Charging Handset
Battery is built into handset.
Internal Battery
A lithium-ion battery is built into handset; it is not
removable.
Recycling
This product requires a lithium-ion battery. Lithiumion batteries are recyclable. To recycle a used lithiumion battery, take it to any shop displaying the recycling
symbol.
About Charging
The following charging options are available.
Charging
Option
ROBOQUL
(desktop
holder)
AC Adaptor
Place handset in the included ROBOQUL
and charge using an AC Adaptor (sold
separately).
Connect handset and AC Adaptor (sold
separately) directly.
Description
Charging/Notification Lamp
Charging/Notification Lamp illuminates red while charging;
illuminates green when charge is almost full.
Charging/Notification Lamp goes out when charge is full.
・If Charging/Notification Lamp is blinking, charging is not
working properly. Make sure that you are using Charger
and products specified by SoftBank Corp. If you are using
specified products only, contact a SoftBank Shop or
SoftBank Customer Support, General Information.
Battery Cautions
Storage
To help maintain performance and life of Internal Battery,
do not store in the following conditions (battery level
should be at approximately 40% for optimal storage).
・Full (immediately after charging is complete)
・Exhausted (too low to power on handset)
Bulges of Internal Battery
Depending on use, bulges may appear near end of battery
life; this does not affect safety.
Internal Battery Replacement
Internal Battery is a consumable item; may need to be
replaced if operating time shortens noticeably. Internal
Battery is not user replaceable; its replacement incurs fees
and requires handset submission to a SoftBank Shop or
other appropriate servicer. For details, contact a SoftBank
Shop or SoftBank Customer Support, General Information.
Charging Cautions
Water Resistance
The included ROBOQUL and AC Adaptor (sold separately)
not waterproof. Never connect a charger plug/USB Type-C
plug while handset or Charger is wet.
Handset is water resistant; however, if a charger plug/USB
Type-C plug is inserted while it is wet, liquid (tap water,
beverage, sea water, pet urine, etc.) or a foreign object
adhered to handset or a charger plug/USB Type-C plug may
cause overheating, burnout, fire, malfunction, burns, etc.
due to electric shock, short-circuiting, etc.
Handling Cords
Do not pull, bend, or twist cord; may damage the cord.
About Charging Abroad
SoftBank Corp. is not liable for problems resulting from
charging handset abroad.
ROBOQUL
ROBOQUL is designed for use in Japan. You assume all
responsibility if used abroad. Use abroad may infringe on
the country’s/region’s laws; check before using.
Charging with ROBOQUL
13
Charge using the included ROBOQUL [SHEGH1] and a
separately-sold AC Adaptor (USB Type-C Quick Charge™ 3.0)
[ZSCAZX]1.
When charging using ROBOQUL and handset is powered on,
ROBOQUL swivels when Display lights up, at start of charging,
for incoming calls, alarms, etc. See "Using ROBOQUL" for
details on setting ROBOQUL motion.
Use ROBOQUL on a flat and stable surface.
Handset does not quick-charge when using ROBOQUL. See
"Handset" for charge times with an AC Adaptor/ROBOQUL.
1 SoftBank SELECTION USB Type-C quick charge AC Adaptor
[SB-AC17-TCQC]
Insert USB Type-C plug on AC Adaptor into ROBOQUL power
connection terminal
After charging, remove handset from ROBOQUL and disconnect
USB Type-C plug on AC Adaptor
Getting Started
・Hold down ROBOQUL while pulling handset straight up.
Unplug AC Adaptor and lower plug
Using ROBOQUL Functions
You must set permissions for ROBOQUL to use functions
beforehand. See "Before Using ROBOQUL" for details.
Charging with AC Adaptor
Use a separately-sold AC Adaptor (USB Type-C Quick Charge™
3.0) [ZSCAZX]1.
For information on other peripheral devices, see SoftBank
Website.
1 SoftBank SELECTION USB Type-C quick charge AC Adaptor
[SB-AC17-TCQC]
Raise plug on AC Adaptor and plug into household AC outlet
Insert ROBOQUL charging plug into External Connection Jack
(), and lean handset backward ()
Charging/Notification Lamp illuminates once charging
starts.
・Press handset firmly and straight all the way. If not
attached adequately, handset may fall or ROBOQUL may tip
over. Avoid scratching handset when attaching.
・Charging/Notification Lamp goes out when charge is full.
・
To continue using ROBOQUL after charging, skip
and.
Insert USB Type-C plug of AC Adaptor into External
Connection Jack
Raise plug on AC Adaptor and plug into household AC outlet
Charging/Notification Lamp illuminates once charging
starts.
・Charging/Notification Lamp goes out when charge is full.
After charging, remove USB Type-C plug from External
Connection Jack, then unplug AC Adaptor and lower plug
AQUOS R
14
Power On/Off
Powering On
Long Pressuntil SHARP logo appears
Handset powers on, and lock screen appears after a while.
・If confirmation appears, follow onscreen prompts.
・An initial settings wizard may appear the first time handset
is powered on. For details on initial settings, see "Handset
Initial Settings."
Powering Off
(Long Press)
Power off
Dragorup
Home Screen appears.
Handset powers off.
15
Using Touchscreen
Handset uses a touchscreen-type Display. Operate with your
fingers on Display.
About Touchscreen
In Case of Unintended Operation
If handset initiates operation without Touchscreen
(Display) being operated or does not respond after
Touchscreen being operated, Pressto turn off
Display, Pressagain to turn on Display and then
operate handset.
Touchscreen Usage Notes
Touchscreen may not respond in these situations:
・Use with gloves/long fingernails
When using handset with gloves on, enable glove mode.
・Use of pens, pencils or sharp objects
・Use with objects on/against Display
・Use while wet
Touch & Hold
Contact Display lightly; release finger when screen changes.
Getting Started
Drag
Touch icon or other item lightly, move it where desired, and
release finger.
Touchscreen Usage Cautions
To prevent malfunctions, do not:
・Touch Display with wet fingers
・Use if Display is wet
If Display is wet, wipe it with a soft cloth.
・Subject Display to force/pressure
・Place a sticker or shield (commercially-available
protective film, privacy protector shield, etc.) on Display
Tap
Contact Display lightly and briefly.
Flick
Contact Display lightly, then brush screen up/down or left/
right.
AQUOS R
16
Pinch/Spread
Contact Display lightly, then move fingers toward each other
(Pinch) or away from each other (Spread).
Handset Initial Settings
When powering on the first time, an initial settings wizard
appears for optionally making Wi-Fi, Google™ account, and
other settings. Follow onscreen instructions to set items.
Insert USIM Card before powering on handset.
Making Initial Settings
Depending on your environment, screen content, setting items
and steps may differ.
Follow onscreen prompts on your handset.
Tap 日本語(日本)EnglishLET’S GO
・
To place an emergency call, Tap Emergency .
・
To set visual assistance, Tap Vision Settings . See
"Accessibility Settings" for details.
Set up as new
・
Tap Copy your data to copy data from another mobile.
Follow onscreen prompts.
Set Wi-Fi items
・Follow onscreen prompts.
・
To skip Wi-Fi settings, select Use cellular network for
setup / Don't use any network for setup . Continue by
following onscreen prompts.
17
Set up a Google Account
・See "Google Account" for details on a Google Account.
・
To skip Google Account setup, Tap SKIP .
SkipSKIP ANYWAY
ALL SET
Getting Started
Handset restarts.
Set up My SoftBank
・
Tap ADD FINGERPRINT to set fingerprints. See "Saving
Fingerprints" for details.
・If signing in to an existing account, window regarding
To use Google Assistant, Tap CONTINUE . Continue by
following onscreen prompts.
AQUOS R
18
Importing Data from Other
Mobiles
Import data from other mobiles, etc. using Bluetooth® or SD
Card.
Enabling Bluetooth® Function
In Home Screen, Flick Hot Sheet up(Settings)
Bluetooth
Bluetooth® menu opens.
Bluetooth® Cautions
Connection
Bluetooth® connection may not be possible with some
Bluetooth® devices. In addition, noise may interfere with
wireless or handsfree conversations.
File Transfer
Files may not appear correctly on recipient devices.
Off
Bluetooth® is enabled ( Onappears).
・
To disable Bluetooth®, Tap On( Offappears).
Renaming Handset Name that Appears
on Other Devices
In Bluetooth® menu,Rename this deviceEnter
nameRENAME
・Available when Bluetooth® is enabled.
Troubleshooting
Q. Cannot use Bluetooth
A. Handset may be in Airplane mode. If in Airplane mode,
Bluetooth® function is disabled. Bluetooth® function
can be enabled again after placing handset in Airplane
mode.
®
Pairing Bluetooth® Devices
Search for and pair nearby Bluetooth® devices. Paired
Bluetooth® devices can be connected easily.
・Enable Bluetooth® on handset and set target devices to be
discoverable first.
In Home Screen, Flick Hot Sheet up(Settings)
Bluetooth
Bluetooth® menu opens; found Bluetooth® devices appear
in Available devices field.
Connecting to Bluetooth® Devices by Service
In Bluetooth® menu,for target deviceTap item
OK
・Available when Bluetooth® is enabled.
・Available when handset is paired with a device that
supports corresponding service.
Connecting to Paired Bluetooth® Devices
In Home Screen, Flick Hot Sheet up(Settings)
Bluetooth
19
Getting Started
・
If target device does not appear,Refresh to try
searching again.
Tap target deviceFollow onscreen prompts for
authentication
Pairing completes; handset connects to some devices (e.g.,
handsfree devices) automatically.
・Authentication procedure varies by device. Passkey entry
may be required.
・Passkey is a 1 to 16-digit number or a set of characters/
symbols required for authentication between handset and
other devices.
・Paired devices appear in Paired devices field.
Pairing Operations
Renaming Paired Devices
In Bluetooth® menu,for target deviceEnter
nameOK
・Available when Bluetooth® is enabled.
Bluetooth® menu opens.
・Paired Bluetooth® devices appear in Paired devices field.
Tap target device
Handset connects to the device.
Connection by Accepting Connection
Requests
Handset automatically accepts connection requests from
paired devices. For unpaired devices, set handset to be
discoverable, then perform pairing operation on other
devices. When connection request arrives, follow onscreen
prompts.
Import contacts from other mobiles using Bluetooth®.
21
Follow onscreen prompts
・Enable Bluetooth® beforehand.
In Home Screen, Flick Hot Sheet up(Settings)
Backup & resetData transfer
Getting Started
Import of contacts is complete.
Caution for Importing Data
Import is not available if there is only a little free space
in internal storage. Process stops if Battery runs low.
Operate with adequate battery charge whenever possible.
Data transfer window opens.
・
In Data transfer window, Tap Function information to
view a video tutorial (Japanese) on Sharp Website.
Data importImport phonebook data from smartphone.
・If SD Card is not inserted or there is no backup file on
inserted SD Card, Select device to import from window
appears. Follow onscreen prompts.
AQUOS R
22
Importing Data from SD Card (Data
Transfer)
Import data (Address Book, Mail, Schedule (Calendar), Notepad,
User/Learning dictionary, emopa) saved to SD Card on other
mobiles or handset to handset.
・Insert SD Card containing a backup file beforehand. See
"Inserting SD Card" for details.
・Address Book data (contacts) may not be imported correctly
depending on the device used for saving them.
In Home Screen, Flick Hot Sheet up(Settings)
Tap item to importTap file to importAdd
registration / Delete and register
・
When Mail is selected, Mail application activates. Follow
In Data transfer window, Tap Function information to
view a video tutorial (Japanese) on Sharp Website.
Data importImport
Complete
Import is complete.
Cautions for Importing Data
Import is not available if there is only a little free space
in internal storage. Process stops if Battery runs low.
Operate with adequate battery charge whenever possible.
When importing User/Learning dictionary (S-Shoin),
existing User/Learning dictionary (S-Shoin) data in internal
storage is deleted.
・If SD Card is not inserted or there is no backup file on
inserted SD Card, Select device to import from window
appears. Follow onscreen prompts.
Using ROBOQUL................................................................ 44
24
Basic Operations
Lock Screen
After a period of inactivity, Display turns off to save battery
power (Screen lock active).
Pressto open lock screen; screen can be unlocked.
・Lock screen also appears at power on.
To unlock screen and use handset, Dragorup. For
details on lock screen, see "Lock Screen Basics."
Navigation Bar
Tap icons on Navigation Bar (Display bottom) for the
following functions/operations.
NameDescription
(Back
key)
(Home
key)
(Recents
key)
(Keyboard
key)
(Menu
key)
Return to the previous screen. Appears
asfor onscreen keyboard; Tap to
close keyboard.
Return to Home Screen.
Open a list of recently used applications
to activate or remove them from the list.
Change keyboard/input method. Appears
when keyboard is open.
Open menu. Appears for some applications.
Home Screen & App List
Most handset operations start in Home Screen or in app list.
In Home Screen, Flick Hot Sheet up for app list and activate
applications, change handset settings, etc. (To change Home
Screen, switch to another home screen app.)
See "Home Screen Basics" for details.
Selecting Options and Navigating
Screens
Tap items, icons, onscreen keys, etc. to open assigned items.
・
To return to the previous screen, Tap.
・
To return to Home Screen, Tapat Display bottom.
25
Menu Operations
Tapat Display top or bottom for available settings and
items.
・Screens may also have settings and items that are available
by Touching & Holding Display.
Handset Settings and Making Settings
In Home Screen, Flick Hot Sheet up(Settings) to
customize operation of handset functions.
・
Checkbox (/) or switch (/) appears for
some options. Tap to enable (/) or disable (/
) option.
Basic Operations
・Drag/Flick slider, spinner, etc. to adjust some settings. If
available, Tapfor additional settings.
Portrait Orientation & Landscape
Orientation
The screen changes to landscape orientation when handset is
rotated sideways.
・Depending on the current screen, the orientation may not
change even by changing handset orientation.
AQUOS R
26
Multi-Window
Split screen to view and operate two applications.
Activate the two applications beforehand. Viewing and
operating(Address Book) and(Phone) is described as
an example.
・Viewing in Multi-Window is not available for some
applications.
Recent apps window opens.
Multi-Window Operations
Switching between Applications
Tap application
・Activate application beforehand.
Exiting Multi-Window
Touch & Holdor Flick pane bar () up/down
Capturing Screenshots
Long Pressand Volume Down Key at the same time to
capture a screenshot of the current screen.
・May be unavailable for some applications.
・
View captured screenshots in(Album), etc.
・Alternatively, use Clip Now and slide your finger along the
edge of Display to capture a screenshot. See "Capturing
Screenshots (Clip Now)" for details.
Touch & Hold application to operateDrag to top of
Display
Multi-Window opens, and Dragged application opens at
From application history at bottom of Multi-Window, Tap next
application
Tapped application opens at bottom of Multi-Window.
27
Confirmation when First
Activating Applications
Set the operation of applications when activating for the
first time.
The type and content of a confirmation differ with the
application. The following explains two types of confirmation:
First things first and Battery optimization.
Setting Required Permissions for
Applications
Permit applications to use data on handset, Camera, etc.
Activating(Album) for the first time is described as an
example.
・An application may not function correctly if permission to
use it is not set.
In Home Screen, Flick Hot Sheet up(Album)
Other Ways to Set Required Permissions
for Applications
Setting Functions to Use by Application
In Home Screen, Flick Hot Sheet up(Settings)
AppsTap applicationPermissionsTap
function
・
Tap function to toggle on ()/off ().
Setting Applications with Permitted Usage by
Function
In Home Screen, Flick Hot Sheet up(Settings)
AppsApp permissionsTap function
Tap application
・
Tap application to toggle on ()/off ().
Basic Operations
In First things first confirmation, NEXT
DENY / ALLOW
Setting is complete.
・
Normally, select ALLOW to permit usage of the function.
・For several functions, continue in the same way.
AQUOS R
28
Setting Battery Optimization
Enable Battery optimization to prevent applications from
running while Display is turned off (except while charging).
Activating(TV) for the first time is described as an
example.
・If Battery optimization is enabled, applications are disabled
while Display is turned off (except while charging).
Consequences such as failure to perform scheduled TV
recording, may occur.
In Home Screen, Flick Hot Sheet up(Tools)
(TV)
Other Ways to Set Battery
Optimization
In Home Screen, Flick Hot Sheet up(Settings)
AppsSpecial accessBattery
optimizationNot optimizedAll appsTap
applicationOptimize / Don't optimizeDONE
・
Alternatively, in Home Screen, Flick Hot Sheet up
(Settings)Battery & energy savingBattery
Battery optimizationNot optimized
All appsTap applicationOptimize / Don't
optimizeDONE .
・If confirmation for giving permission appears, follow
onscreen prompts.
In Battery optimization confirmation, Next
NO / YES
Setting is complete.
・
Normally, select YES to ignore Battery optimization.
Loading...
+ 152 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.