DIGITAL LASER COPIER/
DIGITAL MULTIFUNCTIONAL
SYSTEM
AL-1631
AL-1641CS
MODEL
CONTENTS
The AL-1631/AL-1641CS/AL-1645CS Service Manual describes only changed from
AL-1215/AL-1530CS/AL-1540CS/AL-1551CS Service Manual.
For the common contents, please refer to the AL-1215/AL-1530CS/AL-1540CS/
AL-1551CS Service Manual (Code: 00ZAL1551CS1E)
MODELReference MODEL
1AL-1631AL-1215/AL-1540CS (SPF section)
2AL-1641CSAL-1540CS/AL-1551CS (Duplex section)
3AL-1645CSAL-1540CS (without SPF, with Duplex)
Parts marked with “” are important for maintaining the safety of the machine. Be sure to replace these parts
with the replacement parts specified to maintain the safety and performance of the machine.
This document has been published to be used
SHARP CORPORATION
for after sales service only.
The contents are subject to change without notice.
[1] GENERAL
1. Major functions
Configurations
Item
Model
AL-163116CPMMB8M
AL-1641CS16CPMMB16M
AL-1645CS16CPMMB16M
Descriptions of items
CPM: Copy speed (Copies Per Minute)
SB/MB: SB = Manual feed single bypass, MB = Manual feed multi bypass
2 tray: Second cassette unit.
SPF: Original feed unit
R-SPF: Duplex original feed unit
Color scanner:Color scanner function
GDI printer: GDI printer function with USB.
PCL printer: PCL printer function with USB.
SOPM: Scan Once Print Many function (Many copies are made by one scan.)
Duplex: Auto duplex copy/print function
Memory:Standard page memory
FAX: FAX function.
Descriptions of table
: Standard provision
: No function or no option available
Opt: Option
CPM
(LT)
SB/MB2 TraySPFR-SPF
Color
Scanner
GDI
printer
PCL
printer
SOPMDuplexMemoryFAX
AL-1645CS
AL-1631/1641CS/1645CS GENERAL 1 - 1
AL-1631/AL-1641CS
q
DIGITAL LASER COPIER /
PARTS GUIDE
CODE:00ZAL1641CSP1
DIGITAL MULTIFUNCTIONAL SYSTEM
(AL-1641CS)
1
Exteriors
2
Original cover unit (AL-1645CS)
5
SPF exteriors (AL-1631/AL1641CS)
6
SPF transport unit (AL-1631/AL1641CS)
7
RSPF SPF pick up unit
(AL-1631/AL1641CS)
8
Operation panel
9
Side door unit
F
Optical frame
G
LSU unit
H
Delivery paper guide unit
I
Middle frame
AL-1631
AL-1641CS
MODEL
(For North America and LAG2)
CONTENTS
J
Base plate unit 1
K
Base plate unit 2
L
Fusing unit
M
Drive unit
O
Multi manual paper feeding cover unit
Q
Multi manual paper feeding unit
T
250 sheets tray
U
Harness
X
Packing material & accessories
Y
Operation PWB
Z
MCU PWB
■
Index
AL-1645CS
[Note]
The AL-1645CS/AL-1641CS/AL-1631 Parts Guide describes
only changed from AL-1215/AL-1530CS/AL1540CS/
AL-1551CS Parts Guide.
For the common parts, please refer to the
AL-1215/AL-1530CS/AL1540CS/AL-1551CS Parts Guide
(Code: 00ZAL1551CSP1)
Because parts marked with "!" is indispensable for the machine safety maintenance and poeration, it must
Be replaced with the parts specific to the product specification.
1
2
3
SHARP CORPORATION
MODEL
AL-1645CS
AL-1641CS
AL-1631
This document has been published to be used for
after sales service only.
The contents are subject to change without ontice.
Reference MODEL
AL-1215
AL-1530CS
AL-1540CS
AL-1551CS
DEFINITION
The definition of each Rank is as follows and also noted in the list
Rank A : Maintenance parts, and consumable parts which are not included in but closely related to maintenance parts
Rank B : Performance/function parts (sensors, clutches, and other electrical parts), consumable parts
Rank E : Unit parts including PWB
Rank D : Preparation parts (External fitting, packing, parts packed together)
Rank C : Parts other than the above (excluding sub components of PWB)
Because parts marked with "!" is indispensable for the machine safety maintenance and operation, it must be replaced with
the parts specific to the product specification.
F Other than this Parts Guide, please refer to documents Service Manual(including Circuit Diagram)of this model.
F Please use the 13 digit code described in the right hand corner of front cover of the document, when you place an order.
F For U.S. only-Use order codes provided in advertising literature. Do not order from parts department.