Thank you for buying SHARP's Colour
Television. We hope you will have many
years of enjoyment from this television
set. To ensure proper operation, please
read this manual carefully, and keep it in
a safe place for future reference.
Accessories
The following accessories are included with this television.
MPX
SURROUND
Remote control
Size-AA batteries
21H-FV5RU
Operation manual
TINS-B333WJZZ
04P06-MSF
E 2
Easy setup
To use your TV set, perform the easy setup procedure below.
The mark indicates the page numbers with more detailed information.
Connect the antenna.
• See
29
to connect the antenna.
Connect any video equipment.
• See
• See the operation manual of your video equipment when
29, 30
connecting to the TV set.
to connect video equipment.
Insert the batteries into the remote
control.
• Use the two batteries included with the TV.
• See
6
.
E 3
Insert the AC plug to the power outlet.
• If you will not use the TV set for a considerable length of
time, as a safety precaution, unplug the cord from the
outlet.
Tune the channels.
• Use the buttons on the TV.
• See
14, 15
.
Safety precautions
Damage
Turn off the power and unplug the power cord from the wall
outlet immediately if the TV set begins to make any unusual
noises or gives off smoke or an unusual smell. Then call your
dealer for service.
Servicing
To reduce the risk of electric shock, do not remove the back of
the cabinet. This TV set contains dangerous voltage.
Unstable surface and shocks
Do not place this TV set on an unstable cart, stand, shelf, or
table. The TV set may fall, causing serious injury to a child or
adult, and serious damage to the set.
Sharp recommends securing the TV set to a stable surface or
wall to prevent the set from falling due to sudden shocks or
impact.
Water
To prevent fire or electrical shock, do not place the TV set near a
bathroom, swimming pool or other area where it may become wet.
Moisture
To prevent electrical shock, do not use the TV set in an
excessively damp place.
Power-cord protection
To prevent electrical shock, do not subject the AC power cord to
damage by bending or twisting it, or by placing heavy items on
top of it and do not place the AC power cord under the TV set. If
the AC power cord becomes damaged, unplug it from the wall
outlet immediately and call your dealer for service.
E 4
Safety precautions
Liquid entry
Do not place a flower vase or anything else containing liquid on
the TV set, as liquid spilt on the TV set can cause electrical
shock or failure.
Object entry
Never insert or drop any metallic or inflammable objects into the
ventilation openings of the TV set, as this can cause fire,
electrical shock, or electrical failure.
Ventilation
Do not place this TV set in a confined area, such as on a
bookshelf or in a built-in case. Leave adequate space behind the
TV for proper ventilation.
TV Set position
Do place the TV set onto an even stand, table or track which size
is bigger than the TV set.
If the TV set is put onto a smaller size or uneven stand, table or
track may cause the TV cabinet distort.
Do not put or insert anything between TV set and the stand, table
or track.
Uneven surface and excessive force
Television equipment and cart combination should be moved
with care. Quick stops, excessive force, and uneven surfaces
may cause the equipment and cart combination to overturn.
Fire prevention
To prevent fire, never place any type of candle or naked flames
on the top or near the TV set.
E 5
Part names
The mark indicates the page numbers with more detailed information.
Remote control
Infrared Transmitter Window
Aim this window at the infrared
Turns the TV on or to
Standby mode.
Mutes the sound and restores
sound to previous level.
MPX
Switches between main and
sub sound, and stereo
and monaural sound.
SURROUND
Produces a more spacious sound.
Calls the TIMER screen
Colour buttons
Operate the Favourite Channel
and Teletext functions.
/
Adjusts the volume.
Used for MENU setup.
NORMAL
Resets all settings.
Teletext buttons
Operate the Teletext functions.
sensor window on your TV set.
8
LANGUAGE
TV/VIDEO
10
123
MPX
25
SURROUND
456
7809
21
BACD
22
2721
/
NORMAL
CH
CH
MENU
8
17
27
TV/TEXT
LANGUAGE
13
Changes the on-screen display
language
TV/VIDEO
11
Switches between TV broadcasts
and A/V input programmes.
10
Displays the channel and timer
settings on the screen.
8
Number buttons
8
Switches between one- or two-digit
mode channel selection.
11
Returns to previously viewed
channel.
CH
8
Selects the channel.
Used for MENU setup.
MENU
12
Calls the MENU screen.
CH
/
Installing batteries in the remote control unit
With your thumbnail, pull
up at the slit to open the
battery cover.
• Be sure to match the battery j/k terminals with the j/k marks inside the compartment.
• Remove the batteries if weak or if the unit is not in use for long periods.
• Do not mix old and new batteries.
• Incorrect installation of the batteries may damage the remote control.
Insert two batteries
(size AA).
Replace the battery cover.
E 6
Part names
TV set
TV front
POWER
Turns on and off the main power.
POWER switch
Power indicator
Power can be turned on by
the remote control when the
Infrared sensor window
Receives the infrared wave
from the remote control.
Behind the door
MENU/PRESET
MENU/PRESET button
Tunes the channels.
Used for MENU setup.
Volume up/down buttons
Adjusts the volume.
Makes adjustments in PRESET.
Channel up/down buttons
Tunes or sets the channels.
12
/
CH
Selects the channels.
8
indicator is dimly.
6
8
CH
/
8
Headphone jack
9
Use to listen to the
audio with headphone.
Audio input terminals
30
(AV-2)
Connects to a camcorder,
video game, etc.
Video input terminal (AV-2)
30
8
Connects to a camcorder,
video game, etc.
E 7
• When using headphone, see 9.
Watching TV
CH
Watching a TV programme
Simple operations for watching a TV programme
TV Set
POWER
Power indicator
Behind the door
LANGUAGE
TV/VIDEO
123
MPX
456
SURROUND
7809
CH
CH
1Turn on power.
• When the power indicator is off, press
• When the power indicator lights up dimly, press
control. The power indicator changes to bright and a picture appears.
• To select a one-digit channel, such as 5, press
If “5-” is indicated, press
press
• To select a two-digit channel, such as 15, press
the two-digit input. Press
1
5
5
CH
/
and channels change as shown below.
and channels change as shown below.
5
to select one-digit input, and then
again.
1
, and then press
.
to select
5
--
.
1-
SECAM
15
D/K
BACD
NORMAL
CH
CH
MENU
CH
CH
3Adjust volume using /
.
• The number of oval blocks “ ”
indicates the volume level.
The volume bar disappears
approximately three seconds after
the volume has been adjusted.
TV/TEXT
• When the power indicator lights up dimly, either
the power.
• The channel number is displayed in green for channels tuned by auto tuning and displayed in yellow for
channels tuned using fine tuning.
• When the power indicator lights up dimly, the TV is in Standby mode and power is still supplied to the
TV. If you will not watch TV for a while, turn off the main power by pressing
if you will not be at home for a considerable length of time, unplug the cord from the outlet.
• The AV1 (or COMPONENT), AV2 input channels cannot be selected using
remote control. Use
• Channels that have been skipped cannot be selected by
• The on-screen displays in this manual may differ from their actual appearance.
TV/VIDEO
to select these channel.
CH
/
CH
/
VOLUME10
on the TV can be pressed to turn on
POWER
on the TV set. Also,
CH
CH
. See 16.
CH
/
on the
E 8
Watching TV
Operating the TV buttons
Simple operation of the TV set
Behind the door
Behind the door
CH
CH
Using /
Press to increase volume.
Press to decrease volume.
VOLUME10
Using
Press
CH
CH
to increase channel
/
CH
SECAM
number.
Press
CH
to decrease channel
number.
Using headphone
Insert headphone plug into headphone jack to listen to audio with
headphone.
• The audio from the speakers is turned off.
5
D/K
E 9
• Select an appropriate volume so as not to injure your hearing.
• To avoid injuring your hearing, do not put on the headphone before plugging them into the headphone
jack and before the power is turned on.
• The proper impedance for the headphone is 32 ohms.
• Remove the headphone plug from the jack when not using the headphone.
Useful features
Channel/Timer display
Displays the current channel number, the timer, and other
settings on the screen.
LANGUAGE
123
MPX
456
SURROUND
7809
BACD
CH
CH
NORMAL
TV/TEXT
TV/VIDEO
MENU
1Press .
• The time remaining on the Off timer,
On timer, and Reminder appears on
the screen.
• When no timer is set, the channel
number, colour and sound system
appear on the screen. Press again
to clear these current settings
display on the screen.
2Press again.
• The channel number, colour and
sound system appear on the screen.
3Press once again.
• The display disappears.
Mute
Silences the sound.
OFF 2:30
ON 8:00
1:50
5
SECAM
D/K
1Press .
•“ ” appears on the screen, and the
sound is silenced.
2Press again.
• The volume returns to its previous
level.
• Mute will be cancelled if the is pressed at any time.
E 10
Loading...
+ 23 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.