Shark SC660UK Quick Start Manual
Quick Start - SC660UK
a
TO KNOW WHAT’S IN THE BOX
YOU JUST OPENED:
a Steam Bottle with Direct
Steam Nozzle
b Extension Hose
FIRST THINGS FIRST, YOU NEED
b
c
c Flat Scrubber Attachment
with 2 Bonnets
d Grout Scrubber Brush
e Shower Door Squeegee
d
e
f Filling Flask
g Nozzle Cleaning Tool
f
g
Your portable steam cleaner is designed to clean surfaces that will withstand high
heat and moisture. Do not use on unsealed wood surfaces (especially wooden
antique furniture), unglazed ceramic tile, painted surfaces or surfaces that have
been treated with wax, oils, varnishes, or shellac. The sheen may be removed
by the heat, steam, and friction of the cleaning tools. Lacquer and polyurethane
coatings provide a hard durable protective finish that withstands moisture but it is
always recommended to test an isolated area of the surface to be cleaned before
proceeding. We also recommend you check the use and care instructions from the
surface manufacturer.
When cleaning finished wood surfaces, use broad, continuous cleaning strokes .
To prevent surface damage, avoid focusing steam or allowing the cleaning tools
to sit in one spot for any amount of time.
When assembling your portable steam cleaner, there may be a little water in the
water tank . This is because we test all our portable steam cleaners 100% before
you buy them, so you get a quality Shark
®
Steam product.
141201
Quick Start - SC660UK
1 FILL
Turn the water tank cap counter-
clockwise and remove to fill,
using the filling flask provided.
Be careful not to overfill.
Replace the cap by turning
clockwise. The water tank does
not have to be completely full
for the steam bottle to generate
steam. Steam will stop when the
water tank is empty. You can
refill at any time.
2 DIRECT SPRAY STEAM BOTTLE
USE
Attach the concentrator nozzle
by pressing the lock release
buttons on the concentrator
nozzle and slide onto the Steam
Bottle nozzle. Press in and turn
clockwise until the concentrator
nozzle clicks into place.
3 ATTACHING THE HOSE
Attach the hose connector by
pressing the lock release buttons
on the accessory hose and slide
onto the Steam Bottle nozzle.
Press in and turn clockwise until
it clicks into place.
4 CLEANING TOOL ASSEMBLY
a Press fit the grout scrubber
a
b
c
brush onto the accessory hose
handle.
b Press fit the window
squeegee onto the accessory
hose handle.
c Press fit the flat scrubbing
tool onto the accessory
hose handle. Attach one of
the scrubbing pads onto the
scrubbing tool.
FREEPHONE: 0800 862 0453 www.sharkclean.eu
Loading...