Shark SC660NZ Owner's Manual

OWNER’S GUIDE

SC660NZ

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING YOUR SHARK®
PORTABLE STEAM CLEANER, BASIC
SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING
THE FOLLOWING:

WARNING: READ ALL

INSTRUCTIONS BEFORE USING YOUR
PORTABLE STEAM CLEANER.

DANGER OF SCALDING

Please use caution when using the
steam bottle directly or with the hose and
tool attachments. The steam emitted is
very hot.

IMPORTANT:

This appliance is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use
of the appliance by a person
responsible for their safety.
Children should be supervised to
ensure that they do not play with
the appliance.

WARNING:

steam cleaner is designed to clean hard
surfaces that will withstand high heat. Do
not use on unsealed wood or unglazed
ceramic surfaces. On surfaces that have
been treated with wax the sheen may be
removed by the heat and steam action. It
is always recommended to test an isolated
area of the surface to be cleaned before
proceeding. We also recommend that you
check the use and care instructions for the
surface that you are cleaning.

Your portable

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:

1. USE THE SYSTEM ONLY FOR ITS
INTENDED USE AS DESCRIBED IN
THIS MANUAL.

2. ONLY USE WATER. To extend the life
of your portable steam cleaner, we
recommend using distilled water. If you
live in an area with hard tap water, we
recommend using distilled water.

3. DO NOT add cleaning solutions,
scented perfumes, oils, or any other
chemicals to the water used in this
appliance as this may damage the unit
or make it unsafe for use. Use of any
substances other than manufacturer’s
recommended accessories will
automatically void your warranty.

4. DO NOT use outdoors.

5. DO NOT leave the appliance
unattended when plugged in.

6. Always unplug the power cord from
the electrical outlet when not in use,
when filling the water tank and before
servicing.

7. DO NOT allow to be used by children.
Close attention is necessary when used
by or near children, pets or plants.

8. DO NOT put any objects into openings
or operate with any opening blocked.

9. DO NOT use on leather, wax polished
furniture or floors, painted surfaces,
synthetic fabrics, velvet, or other
delicate, steam sensitive materials.

10. Carefully remove the all purpose
scrubber pad immediately after you
have unplugged and allowed the
portable steam cleaner to cool.

11. Always unplug and allow the portable
steam cleaner to cool before removing
cleaning fabric or changing cleaning
tools and hose.

12. NEVER store the appliance with a
damp/wet scrubbing pad attached.
If left in a single spot for a period of
time with a damp/wet scrubbing pad
attached, the moisture may cause
surface damage.

13. When cleaning the portable steam
cleaner, unplug the power cord and
clean with a dry or damp cloth. Do not
pour water or use alcohol, benzene or
paint thinner on the unit.

14. NEVER use the flat scrubber tool
without the all purpose scrubbing pad
attached.

15. To protect against a risk of fire, electric
shock, or injury:

a. To avoid circuit overload, DO NOT

operate another appliance on the
same socket (circuit) as the portable
steam cleaning system.

b. DO NOT immerse any part of the

system in water or other liquids.

c. Liquid or steam must not be directed

towards equipment containing
electrical components, such as the
interior of ovens.

d. DO NOT pull power cord to

disconnect from outlet; instead,
grasp plug and pull to disconnect.

e. DO NOT use extension cords or

outlets with inadequate current
carrying capacity.

f. DO NOT operate the appliance with

a damaged plug or cord, or if the
unit has been dropped or damaged.
To avoid the risk of electric shock,
do not disassemble or attempt to
repair the appliance on your own. If
the supply cord is damaged, it must
be replaced by a qualified electrician
in order to avoid a hazard. Incorrect
re-assembly or repair can cause a
risk of electrical shock or injury to
persons when the appliance is used.

g. DO NOT disassemble or attempt to

repair the steam cleaner. Incorrect
reassembly or repair can cause a
risk of electrical shock or injury to
persons when the steam cleaner is
used.

h. DO NOT handle plug or portable

steam cleaner with wet hands or
operate without shoes.

i. DO NOT pull or carry by power cord,

power cord as a handle, close a door
on the power cord, or pull the power
cord around sharp corners or edges.

j. DO NOT allow power cord to touch

hot surfaces.

k. ALWAYS disconnect system from

electrical outlet when filling with
water or emptying and when not in
use.

l. NEVER attempt to fill this unit under

a water faucet. Always use the filling
flask that is provided.

m. NEVER turn the appliance over or

on its side when in use.

n. NEVER aim or direct steam towards

people, animals, or plants. The
steam is very hot and can cause
burns. Burns can occur from
touching hot metal parts, hot water,
steam or scrubbing pads.

o. DO NOT operate the steam cleaner

while under the influence of drugs,
alcohol or medications.

p. DO NOT operate in the presence of

explosive and/or flammable fumes.

q. Store your appliance indoors in a

cool, dry area.
r. Keep your work area well lit.
s. Let the system cool completely

before putting away. Wrap cord

loosely around system when storing,

using the cord clip to secure.
t. Keep out of the reach of children.

SAVE THESE

INSTRUCTIONS

Quick Start

Your Shark® portable steam cleaner is designed to clean surfaces that will withstand high heat
and moisture. Do not use on unsealed wood surfaces (especially wooden antique furniture),
unglazed ceramic tile, painted surfaces or surfaces that have been treated with wax, oils, varnishes,
or shellac. The sheen may be removed by the heat, steam, and friction of the cleaning tools. Lacquer
and polyurethane coatings provide a hard durable protective finish that withstands moisture but it
is always recommended to test an isolated area of the surface to be cleaned before proceeding. We
also recommend you check the use and care instructions from the surface manufacturer.

When cleaning finished wood surfaces, use broad, continuous cleaning strokes. To prevent surface
damage, avoid focusing steam or allowing the cleaning tools to sit in one spot for any amount of
time.

When assembling your portable steam cleaner, there may be a little water in the water tank. This
is because we test all our portable steam cleaning systems 100% before you buy them, so you get
a quality Shark

®

steam product.

2

AS SE MBLY

1 Safely remove contents of the portable

steam cleaner cleaning system and lay
them out on a flat surface to see that you
have all the components to complete the
assembly. (Refer to page 2.)

FILL

2 Turn the water tank cap anti clockwise

and remove to fill, using the filling flask
provided. Be careful not to overfill. Replace
the cap by turning clockwise. The water
tank does not have to be completely full for
the steam bottle to generate steam. Steam
will stop when the water tank is empty.
You can refill at any time.

3

DIRECT SPRAY STEAM BOTTLE USE

3 Attach the concentrator nozzle by

pressing the lock release buttons on the
concentrator nozzle and slide onto the
Steam Bottle nozzle. Press in and turn
clockwise until the concentrator nozzle
clicks into place.

Quick Start

6

A

4

B

C

ATTACHING HOSE

4 Attach the hose connector by pressing the

lock release buttons on the accessory hose
and slide onto the Steam Bottle nozzle.
Press in and turn clockwise until it clicks
into place.

5 Select the desired cleaning tool for use.

Follow the cleaning tool sub assembly
Instructions for the selected tool.

CLEANING TOOL ASSEMBLY

6A Press fit the cylinder tool onto the

accessory hose handle.

6B Press fit the garment steamer

diffuser onto the accessory hose

handle.

6C Press fit the flat scrubbing tool

onto the accessory hose handle.
Attach one of the scrubbing pads
onto the scrubbing tool.

THIS MANUAL COVERS MODEL NUMBER:

SC 660 NZ 11

TECHNICAL SPECIFICATIONS

Voltage: 220-240V., 50Hz.

Power: 1550 Watts

Water Capacity: 450 ml (15 fl. oz.)

6

Z854

SAA122030

IPX4

Contents

Thank you for
purchasing the

®

Shark

Portable
Steam Cleaning
System.

GETTING STARTED 2

USING YOUR PORTABLE STEAM CLEANER 4

CARE OF YOUR PORTABLE STEAM CLEANER 8

TROUBLESHOOTING GUIDE 9

1

Getting Started

Your Shark® portable steam cleaner is designed
to clean surfaces that will withstand high heat and
moisture. Do not use on unsealed wood surfaces
(especially wooden antique furniture), unglazed
ceramic tile, painted surfaces or surfaces that
have been treated with wax, oils, varnishes, or
shellac. The sheen may be removed by the heat,
steam, and friction of the cleaning tools. Lacquer
and polyurethane coatings provide a hard durable
protective finish that withstands moisture but it is
always recommended to test an isolated area of the
surface to be cleaned before proceeding.
We also recommend you check the use and care
instructions from the surface manufacturer.

FIRST THINGS FIRST, YOU NEED TO KNOW WHAT’S IN
THE BOX YOU JUST OPENED:

a Steam Bottle

b Accessory Hose

c Steam Concentrator Nozzle

d Flat Scrubber Tool

e Garment Steamer with Bristle Brush

f Cylinder Tool

g All-Purpose Scrubber Pad for Flat

Scrubber Tool

h Garment Steamer Bonnet and Upholstery Bonnet

i All-Purpose Cylinder Cleaning Pocket

j Filling Flask

k Nozzle Cleaner

When cleaning finished wood surfaces, use broad,
continuous cleaning strokes. To prevent surface
damage, avoid focusing steam or allowing the
cleaning tools to sit in one spot for any amount of
time.

When assembling your portable steam cleaner,
there may be a little water in the water tank. This
is because we test all our portable steam cleaning
systems 100% before you buy them, so you get a
quality Shark

®

steam product.

a

b

d

e

c

f

g

j

2

h

i

k

fig. 1

ASSEMBLY & USE INSTRUCTIONS

1 Safely remove contents of the portable steam

cleaner cleaning system and lay them out
on a flat surface to see that you have all the
components to complete the assembly.

2 READ ALL INSTRUCTIONS BEFORE USING YOUR

PORTABLE STEAM CLEANER.

IMPORTANT: Always make sure the steam

bottle is UNPLUGGED from the electrical outlet
when not in use. Never fill the water reservoir
when the unit is plugged in.

3 Only use water. To extend the life of your

portable steam cleaner, we recommend using
distilled water. If you live in an area with hard
tap water, we recommend using distilled water.

4 Do not add cleaning solutions, scented perfumes,

oils, or any other chemicals to the water used
in this appliance as this may damage the unit or
make it unsafe for use. Use of any substances
other than manufacturer’s recommended
accessories will automatically void your
warranty.

FILLING AND REFILLING THE WATER TANK

1 Never fill the steam bottle while plugged into an

electrical outlet.

2 Disconnect the power cord before filling the

water tank.

3 Turn the water tank cap anti clockwise and

remove to fill, using the filling flask provided. Be
careful not to overfill. Replace the cap by turning
clockwise. (fig. 1)

3

Using Your Portable Steam Cleaner

DIRECT SPRAY STEAM BOTTLE USE

Cleaning Tip: Direct steam spray for cleaning
hard to reach nooks & crannies and stubborn
sticky messes where focused steam power may
be needed. Direct steam spray can loosen and
dislodge compact dirt often found in corners
and tight places where traditional methods and
cleaning tools tend to push dirt into, making it
difficult to reach and clean. Spray direct steam
and wipe clean with a cleaning cloth.

CAUTION: Direct steam spray temperature

is extremely hot closest to the nozzle and can
damage surfaces if held directly focusing in one
spot too long. Be sure to constantly move and
adjust the steam spray to avoid causing damage.

fig. 2

1 To attach the Concentrator Nozzle, press the

lock release buttons on the concentrator nozzle
and slide onto the Steam Bottle nozzle. Press in
and turn clockwise until the concentrator nozzle
clicks into place. (fig. 2)

2 To remove the Concentrator Nozzle, press the

lock release buttons and slide it out.

4

fig. 3

1 To attach the accessory hose, press the lock

release buttons on the accessory hose and slide
onto the Steam Bottle nozzle. Press in and turn
clockwise until it clicks into place. (fig. 3)

2 To remove the accessory hose, press the lock

release buttons in and slide out.

3 Select the desired cleaning tool for use. Follow

the cleaning tool sub assembly instructions for
the selected tool.

fig. 4

fig. 5

IMPORTANT: Once plugged in, the Blue LED

will illuminate, and your portable steam cleaner
cleaning system will be ready to use within
30-45 seconds. (fig. 4)

WARNING: Your portable steam cleaner is

designed to clean surfaces that will withstand
high heat and moisture. Do not use on unsealed
wood surfaces (especially wooden antique
furniture), unglazed ceramic tile, or surfaces that
have been treated with wax, oils, varnishes,
or shellac. The sheen may be removed by the
heat, steam, and friction of the cleaning tools.
Lacquer and polyurethane coatings provide a
hard durable protective finish that withstands
moisture but it is always recommended to test
an isolated area of the surface to be cleaned
before proceeding.

We also recommend you check the use and care

instructions from the surface manufacturer.

NOTE: Make sure surfaces are free of crumbs

and debris before using the portable steam
cleaner.

GENERATING STEAM

1 Plug the unit in and wait about 30 to 45 seconds

then press and hold the steam trigger to activate
the pump. You will immediately hear steam
generating and begin to see visible results either
from the nozzle or the attached cleaning tool.
It is recommended that you wait at least 30
seconds before pulling the trigger as this will
minimise water spitting. (fig. 5)

2 Once you release the steam trigger, the pump

will stop delivering water to the boiler and the
steam will reduce to a stop when the boiler
becomes empty.

CAUTION: Steam is hot and can cause burns,

so please use with caution.

5

Using Your Portable Steam
Cleaner with Flat Scrubber

Using Your Portable Steam
Cleaner with Garment Steamer

Cleaning Tip: The Flat Scrubber is designed
for cleaning a variety of sur faces and is
exceptional on those that are large and
flat including counter tops, table tops,
walls mirrors, windows, stairs, shelves and
other similar surfaces. Super absorbent
bonnet loosens, lifts, and locks in dirt and
grime while sanitising at the same time.

fig. 6

fig. 7

1 To attach the All-Purpose Scrubber Pad, place

the pad exterior side down on a flat surface
(lavender tab indicates the bottom of the pad)
and insert the top of the Flat Scrubber Tool into
the top portion of the pad and then pull the pad
over each side of the back edge.

2 Press the Flat Scrubber Tool onto the Accessory

Hose until it clicks into place. (fig. 6)

3 Hold down the steam trigger to start steaming.

(fig. 7)

4 To remove the Flat Scrubber Tool, press and hold

down the Accessory Hose release button. Then
slide out the Flat Scrubber Tool. (fig. 8)

CAUTION: Do not press the steam trigger

while attaching or removing the Flat Scrubber
Tool.

CAUTION: Do not use the Flat Scrubber Tool

without the All-Purpose Scrubber Pad attached.

fig. 8

Cleaning Tip: For freshening upholstery
and removing wrinkles from clothing,
fabrics, and drapes.

Fig. 9

CAUTION: Always determine the colour

fastness of any fabric, especially with reds or
blues. Take a clean, moist and warm towel then
gently rub a small, discrete area of the fabric. If
the colour bleeds onto the towel, you may need
to have the piece professionally cleaned.

1

Press fit the garment steamer onto the bottle

nozzle.

2 For garment steaming, stretch the garment

steamer bonnet over the garment steamer
diffuser.

3 For garment brush, attach directly onto the

garment steamer diffuser by aligning the bottom
of the diffuser with the back of the garment
brush attachment. Gently push the top of the
garment brush up into place over the bonnet
until the attachment snaps into place. (Fig. 9)

Note: It is recommended that the bonnet be

used at all times to achieve a dry steam, thus
preventing condensation.

6

Using Your Portable Steam Cleaner with Cylinder Tool

Cleaning Tip: The Cylinder Cleaning Tool provides controlled cleaning and reaches
into narrow areas and around curved and contoured surfaces for steam dusting and
fine cleaning activities. It is a great cleaning tool for in and around sinks, bathtubs,
refrigerator doors, window sills, door jams and frames, exhaust and intake vents,
banisters, railings, spindles, furniture, seating and more.

fig. 10

fig . 11

fig . 12

1 Slide the Cylinder Cleaning Pocket over

the Cylinder Cleaning Tool frame until it is
completely on. (fig. 10)

2 Close the cinch by pulling on the elastic band

and sliding the locking bean to tighten. (fi g. 11)

3 Attach the Cylinder Cleaning Tool by snapping

into the handle of the Accessory Hose .(fig. 12)

4 Press and hold the steam trigger to create

steam.

5 To remove the Cylinder Cleaning Tool, press and

hold down the Accessory release button. Then
slide out the Cylinder Cleaning Tool.

CAUTION: Do not press steam trigger while

attaching or removing the Cylinder Cleaning
Tool. Always use the Cylinder Cleaning Tool with
Bonnet attached.

7

Care of Your Portable Steam Cleaner

STORAGE

1 Let the appliance cool down before cleaning or

storing.

2 Turn the water tank cap anti clockwise and

remove the cap. Tilt the unit and pour any
remaining water in to the sink or water tight
container. Replace the cap by turning clockwise.
Empty the water tank after each use.

3 Store in a cool dry location.

CLEANING THE STEAM BOTTLE

1 A periodic rinse of your steam cleaner will

help free it from normal water deposits. This
is recommended every 10-15 fillings to free
up any scale deposit. Fill the reservoir with
water and secure the cap. Shake vigorously for
approximately 10-15 times and remove the cap
to empty the reservoir.

40°

fig . 13

fig. 14

CARE OF YOUR SCRUBBING PADS

1 We recommend washing your scrubbing pad

separately from other fabrics to avoid picking
up lint. Only use liquid detergent (no

powder detergent). Do not use any
fabric softeners or bleach. Line dry. Do not
tumble dry. (fig. 13)

2 If there are loose threads on the cleaning pad

carefully cut the thread with scissors. Do not pull
on them or cut at the base.(fig. 14)

IMPORTANT: The scrubbing pad may be very

hot from the steam. Use caution when removing.
Let the unit cool for 2-3 minutes.

DECALCIFYING YOUR STEAM MOP

Calcium and mineral deposits can build up and impact
the performance of your steam mop over time. To
extend the life of your product we recommend that you
use distilled water.

Cleaning tip: To prevent clogging, it is
recommended that you periodically clean the
Concentrator Nozzle and the Accessory Hose
stem with the cleaning tool provided or a paper
clip.

fig. 15

fig. 16

CLEANING THE NOZZLES

1 Your portable steam cleaner should not normally

require cleaning, however, should you notice
a decrease in the steam output, it may be
necessary to remove mineral deposits built up
around the nozzles.

2 Unplug the cleaner from the electrical outlet.

3 Use the provided nozzle cleaner or a small

diameter stiff metal wire, such as a straightened
metal paperclip, and carefully insert the end of
the wire into the nozzle orifice.
(fig. 15, fig. 16)

4 Move the wire back and forth several times to

remove any deposits.

5 Plug in the appliance to the power outlet and

test to note steam output.

8

Trouble Shooting Guide

PROBLEM POSSIBLE REASONS SOLUTIONS

There is no
steam.

There is not
enough steam.

The scrubbing
pads are streaking
or leaving dirt
behind.

The cleaning tool
handles keep
falling off the
hose.

The Steam Bottle is not
plugged in.

There is not enough
water in the unit.

Mineral build-up may be
clogging the nozzle.

Water level may be low.

The all purpose scrubbing pads
may be dirty and need to be
replaced or washed.

The all purpose scrubbing pad
may be worn.

The connection may not be
secure.

Verify that the Blue light is on and the product
is plugged in correctly into a working outlet.

Fill the steam bottle tank.

Using the nozzle cleaner, carefully clean the
nozzle to remove debris.

Fill the steam bottle tank.

Replace with a clean scrubbing pad.

Replace as needed.

Check the connection, making sure you are
pressing in and turning at the same time.

9

Notes

10

Notes

11

Notes

12

ONE (1) YEAR

LIMITED REPLACEMENT WARRANTY STATEMENT

If your product becomes defective due to faulty material or workmanship within a period of 1 year from the date
of purchase, we warrant to do the following:

• For New Zealand Consumers: We will replace the product with a new product, free of charge, or repair

the product at our cost, at our discretion.

• For Australian Consumers: Our goods come with guarantees that cannot be excluded under the

Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount

to a major failure.
Your warranty is subject to the following conditions:
• DO NOT operate the appliance with a damaged plug or cord, or if the unit has been dropped, damaged

or dropped in water. To avoid the risk of electric shock, do not disassemble or attempt to repair the

appliance on your own. If the supply cord is damaged, it must be replaced by a qualified

electrician in order to avoid a hazard. Incorrect re-assembly or repair can cause a risk of

electrical shock or injury to persons when the appliance is used.

• The product has not been misused, abused, neglected, altered, modified or repaired by anyone.
• The product has been subjected to fair wear and tear.
 • Theproducthasnotbeenusedfortrade,professionalorhirepurposes.
 • Theproducthasnotsustaineddamagethroughforeignobjects,substancesoraccident.

Your warranty does not cover:

 • Componentsthataresubjecttonaturalwearandtearcausedbynormaluseinaccordancewith

operating instructions.

 • Unauthorised/impropermaintenance/handlingoroverloadisexcludedfromthiswarranty.
 • Forguaranteeclaimsyouwillneedtosubmitaproofofpurchaseintheformofavalidreceiptthat

displays date and place of purchase.
This warranty does not replace but is in addition to your statutory rights.
This warranty does not apply to accessories supplied with the product.
This warranty applies only to the original purchaser and may not be transferred.
Replacement products will be covered by the limited warranty for the balance of the warranty period from the

date of the original purchase.

Please note:
Only defective product or parts returned to place of purchase will be replaced under this warranty.

New Zealand Contact: Australia Contact
Brand Developers Limited Brand Developers Aust Pty Ltd
Unit H, 686 Rosebank Road, 461 Plummer Street,
Avondale 1026, Auckland, New Zealand PORT MELBOURNE, VIC 3207
Private Bag 93204, Parnell, Auckland 1151 FAX: [phone]
FAX: [phone] AUST Customer Care: 1800 890 840
NZ Customer Care 0800 002 999

13

Printed in China

Illustrations may differ from actual product.

SC660NZ.E.121015.1

Z854

SA A12 2030

IPX4