OWNER’S GUIDE
SC630WC
U. S. : EUR O- PR O O per ati ng L LC
Bos ton , M A 02 459
Ca nad a: EUR O- PR O O per ati ng L LC
44 00 Boi s Fr anc
Vil le S t. Lau re nt, Qu ébe c H 4S 1 A7
1- 877- 304 -7670
ww w.s har kcl ea n.c om
COPY RIGHT© EURO- PRO OP ERATING LLC 201 0
PRI NTED IN CHINA REV. 10011 9
Illu strati ons may d iffer with act ual pro duct.
SC630WC_IB_En_100119.indd 1-2 1/26/10 12:13 PM
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
For Household Use Only
WHEN USING YOUR SHARK®
PORTABLE STEAM POCKET®,
BASIC SAFETY PRECAUTIONS
SHOULD ALWAYS BE
FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS
BEFORE USING YOUR
PORTABLE STEAM POCKET®.
DANGER OF SCALDING
Please use caution when
using the steam bottle directly
or with the hose and tool
attachments and cleaning
pockets. The steam emitted is
very hot.
POLARIZED PLUG:
This appliance has a polarized
plug (one blade is wider than
the other). As a safety feature,
this plug will fit into a polarized
outlet only one way. If the
plug does not fit fully into the
outlet, reverse the plug. If it still
does not fit, contact a qualified
electrician. Do not attempt to
defeat this safety feature.
1. USE THE SYSTEM ONLY FOR ITS
INTENDED USE AS DE SCRIBED IN
THIS MANUAL .
2. ONLY USE WATER. To extend
the life of your Portable Steam
Pocket®, we recommend using
distilled water. If you live in an
area with hard tap water, we
recommend using distilled water.
3. DO NOT add cleaning solutions,
scented perfumes, oils, or any
other chemicals to the water
used in this appliance as this may
damage the unit or make it unsafe
for use. Use of any substances
other than manufacturer’s
recommended accessories will
automatically void your warranty.
4. DO NOT use outdoors.
5. DO NOT leave the appliance
unattended when plugged in.
6. Always unplug the power cord
from the electrical outlet when not
in use, when filling the water tank
and before servicing.
7. DO NOT allow to be used by
children. Close attention is
necessary when used by or near
children, pets or plants.
8. DO NOT put any objects into
openings or operate with any
opening blocked
9. DO NOT use on leather, wax
polished furniture or floors, painted
surfaces, synthetic fabrics, velvet,
or other delicate, steam sensitive
materials.
10. Carefully remove the steam
cleaning pocket immediately after
you have unplugged and allowed
the portable steam pocket® to cool.
11. Always unplug and allow the
portable steam pocket® to cool
before removing cleaning fabric or
changing cleaning tools and hose.
12. NEVER store the appliance with
a damp/wet cleaning pocket
attached. If left in a single spot for
a period of time with a damp/wet
pocket attached, the moisture may
cause surface damage.
13. When cleaning the portable steam
pocket®, unplug the power cord
and clean with a dry or damp cloth.
Do not pour water or use alcohol,
benzene or paint thinner on the
unit.
14. NEVER use the cleaning pocket
wedge or cylinder tools without the
cleaning pocket fabric attached.
15. To protect against a risk of fire,
electric shock, or injury:
a. To avoid circuit overload, DO
NOT operate another appliance
on the same socket (circuit as
the portable steam pocket®
cleaning system .
b. DO NOT immerse any part of
the system in water or other
liquids.
c. DO NOT pull power cord
to disconnect from outlet;
instead, grasp plug and pull to
disconnect.
d. DO NOT use extension cords or
outlets with inadequate current
carrying capacity.
e. DO NOT operate the system
with a damaged cord or plug,
or if the appliance or any other
part of the system has been
dropped or damaged.
f. DO NOT disassemble or
attempt to repair the Steam
Bottle. Return the system to
EURO -PRO Operating LLC
for examination and repair.
Incorrect reassembly or repair
can cause a risk of electrical
shock or injury to persons when
the Steam Bottle is used.
g. DO NOT handle plug or portable
steam pocket® with wet hands
or operate without shoes.
h. DO NOT pull or carry by power
cord, power cord as a handle,
close a door on the power cord,
or pull the power cord around
sharp corners or edges.
i. DO NOT allow power cord to
touch hot surfaces.
j. ALWAYS disconnect system
from electrical outlet when
filling with water or emptying
and when not in use.
k. N EVER attempt to fill this unit
under a water faucet. Always
use the filling flask that is
provided.
l. NEVER turn the appliance over
or on its side when in use.
m. NEVE R aim or direct steam
towards people, animals, or
plants. The steam is very hot
and can cause burns. Burns can
occur from touching hot metal
parts, hot water, steam or steam
pockets.
n. DO NOT operate the steam
cleaner while under the
influence of drugs, alcohol or
medications.
o. DO NOT operate in the presence
of explosive and/or flammable
fumes .
p. Store your appliance indoors in
a cool, dry area.
q. Keep your work area well lit.
r. Let the system cool completely
before putting away. Wrap cord
loosely around system when
storing, using the cord clip to
secure.
s. Keep out of the reach of
children.
TOL L F RE E: 1- 87 7-30 4-76 70
SC630WC_IB_En_100119.indd 3-4 1/26/10 12:13 PM
ww w.s ha rkc lean.co m
Quick Start
Quick Start
Your Portable Steam Pocket® is designed to clean surfaces that will withstand high
heat and moisture. Do not use on unsealed wood sur faces (especially wooden antique
furniture), unglazed ceramic tile, painted surfaces or surfaces that have been treated
with wax, oils, varnishes, or shellac . The sheen may be removed by the heat, steam,
and friction of the cleaning tools. Lacquer and polyurethane coatings provide a hard
durable protective finish that withstands moisture but it is always recommended
to test an isolated area of the surface to be cleaned before proceeding. We also
recommend you check the use and care instructions from the surface manufacturer.
When cleaning finished wood surfaces, use broad, continuous cleaning strokes. To
prevent surface damage, avoid focusing steam or alowing the cleaning tools to sit in
one spot for any amount of time.
When assembling your Portable Steam Pocket®, there may be a little water in the
water tank. This is because we test all our portable steam pocket cleaning systems
100% before you buy them , so you get a qualit y Shark Steam product.
2
ASSEMBLY
1 Safely remove contents of the
Portable Steam Pocket® Cleaning
System and lay them out on a flat
surface to see that you have all
the components to complete the
assembly (Refer to page 2).
FILL
2 Turn the water tank cap counter-
clockwise and remove to fill, using the
filling flask provided. Be careful not
to overfill. Replace the cap by turning
clockwise. The water tank does not
have to be completely full for the
steam bottle to generate steam.
Steam will stop when the water tank
is empty. You can refill at any time.
DIRECT SP RAY STEAM BOTTLE USE
3 Attach the steam bottle nozzle.
Aligning the arrow located on
the steam bottle nozzle with the
un-lock symbol located on the
nozzle connector. Press in and turn
clockwise to secure into place. The
arrow on the nozzle will align with the
lock symbol.
3
HOSE & CLEAN ING TOOL
ATTACHMENT USE
4 Attach the hose connector. Aligning
the arrow located on the hose
connector with the un-lock symbol
located on the nozzle connector.
Press in and turn clockwise to secure
into place. The arrow on the hose
connector will align with the lock
symbol.
5 Select the desired cleaning tool for
use. Follow the cleaning tool sub
assembly Instructions for the selected
tool.
6 Attach the cleaning tool by inserting
the hose stem into the handle of
the cleaning tool. Press in and turn
clock wise at the sa me tim e to
secure and press in and turn counter
clock wise to release. Check for
proper connection by turning the
handle counter-clockwise a few turns.
The handle should remain connected.
(Note for reference: This connection
method is the same design used with
most over the counter prescription
bottles). The design of this
connection is to prevent the hose
from twisting and kinking during use.
4
6
WEDGE CLEANING TOOL ASSEMBLY
7 Slide the wedge shaped cleaning
pocket over the wedge cleaning tool
frame until it is completely on.
8 Close the cinch by pulling on the
elastic band and sliding the locking
bean to tighten.
CYLINDER CLEANING TOOL
ASSE MBLY
9 Squeeze “chopsticks” together and
slide the cylinder shaped cleaning
pocket over the cylinder cleaning tool
frame until it is completely on.
10 Close the cinch by pulling on the
elastic band and sliding the locking
bean to tighten.
7
8
9
11
DETAIL CLEANI NG TOOL
ASSEMBLY
11 Press fit the scrub bing detail
brush onto the detail cleaning
tool handle.
12
13
GARMENT STEAMER
ASSE MBLY
12 Press fit the garment steamer
onto the bottle nozzle.
13 Stretch the garment steamer
bonnet over the garment
steamer diff user. Attach
the garment brush onto the
garment steamer diffuser by
aligning the bottom of the
diffuser with the back of the
garment brush attachment .
Gently push the top of the
garment brush up into place
until the attachment snaps into
place.
TOL L F RE E: 1- 87 7-30 4-76 70
SC630WC_IB_En_100119.indd 5-6 1/26/10 12:13 PM
ww w.s ha rkc lean.co m
1
ww w.s ha rkc lean.co m
Eng lis h
Contents
Thank you for
purchasing
the Shark®
Portable
Steam Pocket®
Cleaning
System.
GETTING STARTED ................................................................. 2
USING YOUR PORTABLE STEAM POCKET® .................4
CARE OF YOUR PORTABLE STEAM POCKET® ...........9
SUGGESTED USES ................................................................ 10
TROUBLESHOOTING GUIDE ..............................................12
REPLACEMENT PARTS ........................................................ 16
WARRANTY AND REGISTRATION ...................................17
TECHNICAL SPECIFICATIONS
Voltage: 120V., 60Hz.
Power: 1550 Watts
Water Capacity: 450 ml (15 fl. oz.)
TOL L F RE E: 1- 87 7-30 4-76 70
SC630WC_IB_En_100119.indd 7-1 1/26/10 12:13 PM