Sennheiser SR 300 IEM G3 User Manual

Wireless
SR 300 IEM G3
FEATURES
Sturdy metal housing
42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
Enhanced frequency bank system with up to 16 compatible frequencies
Ethernet port for connecting to the Wire­less Systems Manager (WSM) software for control via computer – this delivers a good overview of monitoring and professio­nal data management for multi-channel systems
Pilot tone squelch for eliminating RF inter­ference when transmitter is turned off
Enhanced AF frequency range
Increased range for audio sensitivity
Wireless synchronization of receiver para­meter from transmitter
User-friendly menu operation with more control options
Illuminated graphic display
Auto-Lock function avoids accidental changing of settings
HDX compander for crystal-clear sound
Mute function
Integrated 5-band graphic Equalizer
Wide range of accessories adapts the system to any requirement
Optimized PLL synthesizer and micro­processor technology
Stereo/mono selection
Easy setup of a multi-channel system using the Easy Setup Sync function
You can only sound better if you hear yourself better. Wireless monitoring is taken to the next level of perfection with the Sennheiser G3 monitoring system. Added features of this stereo transmitter include the valuable integrated 5 band equali­zer for extra control of the sound. New pass-through sockets for the audio signal enable the audio feed from a console to be routed to other devices in the chain, simplifying setup. The enhanced audio frequency response of 25 to 15,000 Hz means the sound the performers hear is the most realistic and life-like a wireless monitor system has ever had to offer.
TECHNICAL DATA
Frequency ranges.................................................... 516 – 558, 566 – 608, 626 – 668,
Transmission frequencies ..................................... 1,680 frequencies, tuneable in steps
Switching bandwidth .............................................42 MHz
Frequency stability .................................................±10 ppm (–10 °C to +55 °C)
Antenna output.......................................................BNC socket, 50 O
RF output power at 50 O ...................................... typ. 10/30 mW (Low/Standard),
Modulation ................................................................wideband FM stereo (MPX pilot tone)
Compander system .................................................Sennheiser HDX
Nominal/peak deviation .......................................±24 kHz/±48 kHz
MPX pilot tone (frequency/deviation) ..............19 kHz/±5 kHz
AF frequency response ..........................................25 Hz to 15 kHz
AF input ..................................................................... 2 x XLR-3/¼“ (6.3 mm) jack combo
Max. input level .......................................................+22 dBu
THD (at 1 kHz and nominal deviation) ..............< 0.9 %
Signal-to-noise ratio
at nominal load and peak deviation ...................> 90 dB
stereo transmitter
734 –776, 780 – 822, 823 – 865 MHz
of 25 kHz 20 frequency banks, each with up to 16 factory-preset channels 6 frequency banks with up to 16 user programmable channels
switchable
socket, electronically balanced
Continued on page 2
SR 300 IEM G3 Wireless stereo transmitter
21
3
+
TECHNICAL DATA
AF output .................................................................. ¼’’ (6.35 mm) stereo jack socket,
balanced
Temperature range .................................................–10 °C to +55 °C
Power supply............................................................12 V
Current consumption .............................................max. 350 mA
Dimensions ...............................................................approx. 202 mm x 212 mm x 43 mm
Weight .......................................................................approx. 980 g
ARCHITECTS SPECIFICATIONS
The wireless stereo rack-mount transmitter shall be for use with a companion receiver as part of a wireless RF monitoring system. T
he transmitter shall operate within six UHF frequency ranges, each with a 42 MHz switching bandwidth: 516 – 558 MHz, 566 – 608 MHz, 626 – 668 MHz, 734 –776 MHz, 780 – 822 MHz, 823 – 865 MHz; transmission frequencies shall be 1,680 per range and shall be tun­able in 25 kHz steps. The transmitter shall feature 20 fixed frequency banks with up to 16 compatible frequency presets and 6 user banks with up to 16 user programmable frequencies. Frequency stability shall be +10 ppm at −10 °C to +55 °C (+14 °F to +131°F). RF output power at 50 O shall be switchable between 10 mW (Low) and 30 mW (Standard). The stereo audio input shall utilize two discrete (left/right) electronically balanced 1⁄4“ (6.3 mm) jack/XLR-3F combo sockets; the audio output shall utilize a balanced 1⁄4“ (6.3 mm) jack socket; one audio loop output shall be provided utilizing a balanced 1⁄4“ (6.3 mm) jack socket. A headphone output with headphone volume control shall be provided and shall utilize a 1⁄4“ (6.3 mm) stereo jack socket. The transmitter shall have an Ethernet port (RJ45) for remote network-based monitoring and control using the Senn­heiser Wireless System Manager software. One 50 O BNC-type input socket shall be provided for connecting the antenna. Nominal/peak deviation shall be ±24 kHz/±48 kHz. The transmitter shall incorporate the Sennheiser HDX compander system and shall include a 19-kHz MPX pilot tone with a ±5 kHz deviation. The audio frequency response shall range from 25 –15,000 Hz. Maximum input level shall be +22 dBu. Total harmonic distortion (THD) at 1 mV and nominal deviation shall be < 0.9 %. Signal-to­noise ratio at nominal load and peak deviation shall be > 90 dB. The transmitter shall be menu-driven with a backlit LC display showing the current frequency, frequency bank and channel number, metering of AF level, transmission status, transmission power, equalizer setting, input sensitivity, and lock status. An auto-lock feature shall be provided to prevent settings from being accidentally altered. The parameters of associated receivers shall be configurable in the transmitter menu and synchronized with the receivers via an integrated infrared interface. The transmitter shall operate on 12 V power supplied from the NT 2-3 mains unit. Power consumption shall be 350 mA. The transmitter shall have a rugged metal housing; dimensions shall be approximately 202 x 212 x 43 mm (7.95“ x 8.35“ x 1.69“). Weight shall be approximately 980 grams (2.16 lbs). Operating temperature shall range from −10 °C to +55 °C (+14 °F to +131°F). The transmitter shall be the Sennheiser SR 300 IEM G3.
DELIVERY INCLUDES 1 SR 300 IEM G3 rack-mount
transmitter
1 NT 2–3 mains unit with one country
adapter 1 Rod antenna 1 GA 3 rack adapter 1 Instruction manual 1 Frequency information sheet 1 RF licensing information sheet 4 Device feet
CONNECTIvITy
Loading...
+ 1 hidden pages