Sennheiser SR 2000, SR 2000XP IEM AW, SR 2000 IEM AW, SR 2000 IEM AW-X, SR 2000 IEM GW Brochure & Specs
...
FEATURES
20 fixed frequency banks with up to
32 compatible presets in up to 75 MHz
switching bandwidth and 6 user banks
Audio loop-out jack
5 Band graphic EQ
Rugged 19“ all-metal housing with
integrated power supply unit
Ethernet for monitoring and control using
Sennheiser WSM Mac or PC software
Extended AF requency response
(25… 15000 Hz)
Receivers can be configured in the trans-
mitter menu and can be synchronized
via the infrared interface
ARCHITECT’S
SPECIFICATIONS
The device shall be a stationary stereo
transmitter for use with a companion
stereo receiver as part of a high reliability
stereo wireless radio frequency transmission system. The stationary stereo transmitter shall operate within a RF frequency
range of 516 – 865 MHz in 20 fixed
frequency banks and 6 user banks with a
maximum of 32 presets with a switching
bandwidth of maximum 75 MHz tunable
in 25 kHz steps; carrier frequencies shall
be maximum 3000. Frequency stability
shall be ±10 ppm. Nominal/peak deviation
shall be ±24 kHz/±48 kHz. A compander
feature shall be included and shall be
Sennheiser HDX system. The transmitter
shall include MPX pilot tone (frequency /
deviation) of 19 kHz / ±5kHz. Audio frequency response shall be 25 – 15,000 Hz;
total harmonic distortion (THD) shall be
<0.9 %. Audio frequency input level shall
be +22 dBu (maximum, balanced). Signalto-noise ratio shall be > 90 dB.
Continued on page 2
Rugged, reliable, and flexible – in short: professional. With SR 2000, you can
choose from 26 frequency banks with up to 32 channels. The channels can be
user-programmed into six of the frequency banks. Three switchable RF output
powers (10, 30, and 50 mW – additionally 100 mW in the US version) provide
greatest artistic and technical freedom. A 5-band equalizer makes it possible to
individually influence the audio output signal.
TECHNICAL DATA
RF frequency range .............................................516 – 865 MHz
Carrier frequencies ..............................................max. 3000
Presets ...................................................................max. 32
Switching bandwidth .......................................... max. 75 MHz, tuneable in
25 kHz steps
Frequency stability ..............................................±10 ppm
Antenna output ...................................................BNC (50 OHM)
RF Output power .................................................. typ. 10 mW (Low)
typ. 30 mW (Standard)
typ. 50 mW (High)
XP-Version: typ. 100 mW (Maximum)
Compander ............................................................HDX
Nominal / Peak deviation...................................±24 kHz / ±48 kHz
MPX pilot tone (frequency / deviation) ..........19 kHz / ± 5kHz
Frequency response ............................................25 – 15000 Hz
Signal-to-noise ratio ...........................................> 90 dB
THD, total harmonic distortion .........................< 0,9 %
Max. input level ....................................................+22 dBu
Audio input ........................................................... XLR-31/4“ (6,3mm) jack combo
socket, electronically balanced
Audio output ........................................................1/4“ (6,3mm) jack socket, balanced
Operating temperature ......................................–10 °C – +55 °C
Power supply ........................................................ 100 - 240 V AC, 50/60 Hz
Current consumption ..........................................max. 0,1 A
Dimensions ...........................................................217 x 483 x 43 mm
Weight ...................................................................2600 g
Continued on page 2
SR 2000 Stereo Transmitter
ARCHITECT’S
SPECIFICATIONS
The stereo audio input shall utilize two
discrete (left/right) electronically-balanced combination female XLR-3 and ¼“
audio sockets; the audio output shall utilize a balanced ¼“ (6.3 mm) audio socket;
one audio loop output shall be provided
utilizing a balanced ¼“ (6.3 mm) audio
socket. A stereo headphone output with
local level control shall be provided on the
front panel and shall utilize a ¼“ (6.3 mm)
stereo audio socket. Menu-based software
adjustments shall be made using a backlit
LCD user display; associated receivers shall
be configured in the receiver menu and
synchronized with the transmitter via an
integrated infrared interface. A 5-band
graphic equalizer shall be provided. One
50O BNC connector shall provide the
attachment point for the main transmitter
antenna. RF output power shall be selectable at 10 mW (Low), 30 mW (Standard),
50 mW (High) and 100 mW (Maximum,
XP version only). An Ethernet port (RJ45)
shall be provided to allow remote network-based monitoring and control of the
transmitter using Sennheiser Wireless System Manager Mac or PC software. Power
shall be supplied to the transmitter by the
internal power supply with auto-switching
mains voltage of 100 – 240 VAC at 50/60
Hz. Current draw shall be maximum 0.1 A.
The transmitter chassis shall be fabricated from metal and shall be capable of
mounting in a standard 19“ equipment
rack without additional hardware; case
dimensions shall be approximately 8.54“
x 19.02“ x 1.69“ (217 x 483 x 43 mm).
Weight shall be 91.71 oz (2600 grams).
Operating conditions shall be ambient
temperature +14°F to +131°F (-10°C to
+55°C). The stationary stereo transmitter
shall be Sennheiser model SR 2000.
TECHNICAL DATA
DELIVERY INCLUDES
1 SR 2000 IEM transmitter
3 mains cables (EU, UK, and US)
2 rod antennas
1 instruction manual
1 supplementary frequency sheet
1 supplementary RF license sheet
4 device feet
SR 2000 Stereo Transmitter
Loading...