S1 PASSIVE
Instruction manual
Contents
Contents |
|
Important safety information .................................................................................. |
2 |
The S1 PASSIVE headset ............................................................................................ |
3 |
Delivery includes ........................................................................................................ |
4 |
Product overview ....................................................................................................... |
5 |
Overview of the headset ............................................................................................ |
5 |
Overview of the control unit ..................................................................................... |
6 |
Putting the S1 PASSIVE into operation ................................................................... |
7 |
Connecting the headset to the intercom ................................................................ |
7 |
Inserting and changing the batteries/rechargeable batteries .......................... |
7 |
Connecting an audio device or mobile phone to the control unit ..................... |
8 |
Attaching the belt clip, the cable clip and the design caps ................................ |
9 |
Using the S1 PASSIVE .............................................................................................. |
11 |
Individually adjusting the headset and wearing it ............................................ |
11 |
Switching the control unit on/off .......................................................................... |
13 |
Adjusting the headset to the listening situation ............................................... |
13 |
Transporting the S1 PASSIVE ................................................................................. |
16 |
Cleaning and maintaining the S1 PASSIVE ........................................................... |
17 |
If a problem occurs ... ............................................................................................... |
18 |
Accessories and spare parts ................................................................................... |
19 |
Specifications ............................................................................................................ |
20 |
Manufacturer declarations ..................................................................................... |
22 |
S1 PASSIVE | 1
Important safety information
Please read this instruction manual carefully and completely before using the product.
Always include this instruction manual when passing the product on to third parties.
This instruction manual is also available on the Internet at www.sennheiser-aviation.com or www.sennheiser.com.
Preventing health problems and accidents
Always maintain a distance of at least 3.94“ (10 cm) between the ear cups and the cardiac pacemaker or implanted defibrillator since the product generates permanent magnetic fields.
Keep product, accessory and packaging parts out of reach of children who could swallow smaller pieces.
Switch the product off after use to conserve battery power. Remove the rechargeable batteries if the product will not be used for extended periods of time.
If during flight operation you, as the pilot, operate your connected device using the headset, this can limit your attention. During flight operation, do not use the headset for making phone calls or listening to music.
The product is capable of producing sound pressure exceeding 85 dB(A). In many countries 85 dB(A) is the maximum legally permissible level for continuous noise exposure during the working day. Do not listen at high volume levels for long periods of time to prevent hearing damage.
Preventing damage to the product and dysfunctions
Always keep the product dry and do not expose it to extreme temperatures (hairdryer, heater, extended exposure to sunlight, etc.) to avoid corrosion or deformation.
Only clean the product with a soft, dry cloth.
Never repair or attempt to repair a defective product yourself. Contact your Sennheiser partner or the Sennheiser Service Department.
Only replace parts of the product whose replacement is described in this instruction manual. All other parts of the product must be replaced by your Sennheiser partner.
2 | S1 PASSIVE
Intended use
Intended use of the product includes
•having read and understood this instruction manual, especially the chapter “Important safety information”,
•using the product within the operating conditions and limitations described in this instruction manual.
“Improper use” means using the product other than as described in this instruction manual, or under operating conditions which differ from those described herein.
The S1 PASSIVE headset
The S1 PASSIVE aviation headset convinces with excellent passive noise attenuation. The headset has been designed for use in noisy singleand multi-engine propeller aircraft and helicopters.
The headset is characterized by its high-quality appearance and offers outstanding wearing comfort. With ear pads specially designed for spectacle wearers, a contact pressure that is individually adjustable and a two-piece headband, the headset is always comfortable to wear even on long flights. In addition, the headset has been designed with an emphasis on well-balanced weight distribution.
The control unit of the S1 PASSIVE features a 3.5 mm jack socket for connecting an audio device or mobile phone. An integrated switch allows you to mute the connected audio device or mobile phone during ATC communications.
Features
•Superb passive noise attenuation
•Extremely comfortable to wear due to adjustable contact pressure and ear pads specially designed for spectacle wearers
•Well-balanced low weight
•Foldable ear cups
•Excellent audio quality
•ActiveGardTM safeguards your ears from volume peaks above 110 dB
•Control unit with 3.5 mm jack socket for connecting audio devices and mobiles phones
•Muting of the connected audio device or mobile phone during ATC communications
•“Auto shut-off” extends battery life
•Made in Germany
S1 PASSIVE | 3
Delivery includes
S1 PASSIVE
Safety Guide
Quick Guide
S1 PASSIVE headset
Transport case for headset and accessories
3.5 mm audio cable (OMTP compatible)
3.5 mm adapter cable (AT&T compatible)
Cable clip
Wind and pop screen
Belt clip
Safety guide and quick guide
A list of accessories can be found on the S1 PASSIVE product page at www.sennheiser-aviation.com or www.sennheiser.com.
For information on suppliers, contact your local Sennheiser partner:
•www.sennheiser-aviation.com > “Purchase Information”
•www.sennheiser.com > “Service & Support”
4 | S1 PASSIVE
Product overview
1
2 |
|
A |
|
5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3
4
1 Headband padding |
4 Microphone |
2 Ear pads |
5 Contact pressure slide switch |
3 Microphone sensitivity control |
|
Before wearing the headset, remove the protective foil A from the Sennheiser logo.
S1 PASSIVE | 5
Product overview
0
9
7 8
6
B
C
A
6Mono /stereo
switch
7MUTING OFF/ON switch
8Power OFF/ON switch
9Power LED
0 Volume control
A5.25 mm jack plug (PJ-068 equivalent)
B¼” (6.35 mm) jack plug (PJ-055 equivalent)
C3.5 mm jack socket
(mobile phone and audio input)
6 | S1 PASSIVE
Putting the S1 PASSIVE into operation
|
Connect the jack plugs of the control unit |
B |
to the corresponding jack sockets of your |
|
intercom. |
A |
|
Jack plug of the control unit |
Jack socket of the intercoms |
5.25 mm jack plug A |
Microphone input |
¼” (6.35 mm) jack plug B |
Headphone output |
If you are using the headset together with an audio device or mobile phone, the control unit requires batteries or rechargeable batteries.
1Remove the belt clip from the control unit and open the battery compartment cover.
2Insert two AA size batteries/rechargeable batteries. Observe correct polarity.
3Close the battery compartment cover.
1 |
2 |
When you switch the headset on (see page 13), the Power LED 9provides information on the remaining battery/rechargeable battery capacity.
LED lights up yellow: LED lights up red:
The battery/rechargeable battery capacity is sufficient. The batteries/rechargeable batteries are flat.
S1 PASSIVE | 7