Sennheiser RS120-8 User Manual [ru]

Page 1
RS 120 II
RS 119 II
Quick Guide Consignes de sécurité Indicaciones de seguridad Guia de Segurança Sicherheitshinweise Guida per la sicurezza Veiligheidsgids
Page 2
1
2
3
NiMH AAA 1.2 V
Page 3
4
5
6
Page 4
Delivery includes
HDR 120 II/HDR 119 II headphones
TR 120 II/TR 119 II transmitter with audio connection cable
SA103K-09G/NT9-3A (EU) mains unit (for EU market only)
SA103K-09B/NT9-3A (UK) mains unit (for UK market only)
NiMH rechargeable batteries, AAA size, 1.2 V
Adapter, 1/4“ (6.3 mm)
Quick Guide
Quick Guide
Safety Guide
Safety Guide
The diagrams corresponding to the chapter headings can be found on the fold-out page.
FRESPTITNLJP DE EN
Preparing the transmitter for use
The transmitter is prepared for wall mounting (recess at the rear of the transmitter). The required mounting material (screws and plugs) is not included in the delivery.
Connecting the transmitter to an audio output of
1
your audio source
왘 Choose a suitable place near your audio source (e.g. TV,
stereo or home cinema system). Avoid placing the trans­mitter close to metal objects such as shelf bars, reinforced
1
Page 5
concrete walls, etc. as this can decrease the transmitter’s range.
왘 Connect the transmitter‘s audio connection cable:
• either directly to the headphone socket or
• to the 1/4“ (6.3 mm) adapter and a corresponding headphone socket.
왘 Set the volume for the headphone output of your audio
source to a medium level. If the headphone output volu­me is set too low, the transmitter automatically switches off.
Some TVs have a function that mutes the TV loud­speakers when you connect a transmitter. If neces­sary, change this setting via the operating menu of your TV.
Connecting the transmitter to the mains
왘 Connect the mains unit to the socket at the rear of the
transmitter. Plug the mains unit into a wall socket. The transmitter switches on and the ON/OFF LED lights up green.
Preparing the headphones for use
Opening the battery compartments
2
왘 Turn the ear pads in the direction of the arrow until you
overcome a slight resistance and lift them off the ear cups.
Inserting and replacing the rechargeable batteries
3
CAUTION
왘 Only use NiMH rechargeable batteries, never
use standard batteries!
왘 Insert the supplied rechargeable batteries. Secure the ear
pads to the ear cups.
왘 Charge the rechargeable batteries for at least 24 hours
prior to first time use. Subsequent charging time d epends on the previous operating time and is up to 18 hours max.
2
Page 6
왘 Place the headphones on the charging cradle of the trans-
mitter. The red LED lights up, indicating that the batteries are being charged. The LED remains lit even when the re­chargeable batteries are fully charged.
Using the RS headphone system
Switching on the audio source
4
왘 Switch on the audio source. The transmitter automatically
switches on and off together with the audio source. The
ON/OFF LED lights up green.
Switching on the headphones/adjusting the volume
5
왘 First, set the volume on the headphones to a low level. 왘 Switch on the headphones and set the volume to the
desired level.
왘 Switch off the headphones after use to avoid discharging
the batteries.
Optimizing the reception
6
왘 Adjust the receiver channel with the TUNE control on the
headphones.
However, if reception is subject to interference:
왘 Change the transmission channel by setting the switch
at the bottom of the transmitter to another position and re-adjust the receiver channel with the TUNE control on the headphones. Some electronic devices (e.g. televisi­ons) can cause interference to your wireless headphone system. If this happens, increase the distance between the transmitter and the interference source.
Specifications and Frequently Asked Questions (FAQ’s)
왘 Visit our website at www.sennheiser.com.
FRESPTITNLJP DE EN
3
Page 7
Manufacturer declarations
Warranty
Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty con­ditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner. Before putting the product into operation, please observe the respective country speci­fic regulations.
In compliance with the essential requirements and other relevant provisions of the following Directives:
• RoHS Directive (2002/95/EC)
• WEEE Directive (2002/96/EC) Please dispose of this product by taking it to your local collection point or recycling center for such equipment.
• Battery Directive (2006/66/EC) Please dispose of the rechargeable batteries as special waste or return them to your specialist dealer. In order to protect the environment, only dispose of exhausted batteries.
CE Declaration of Conformity
• R&TTE Directive (1999/5/EC)
• EMC Directive (2004/108/EC)
• Low Voltage Directive (2006/95/EC)
• EuP Directive (2005/32/EC)
The CE Declaration of Conformity is available on our website at www.sennheiser.com.
In compliance with:
Europe/UK
4
Page 8
RS 120 II
RS 115 II
RS 119 II
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com
Printed in China, Publ. 04/11, 545188/A01
Loading...