MOMENTUM True Wireless
True wireless stereo earphones
Model: M3IETW (M3IETW L, M3IETW R, M3IETW C)
Instruction manual
Use the search function, the navigation (left) or the following links:
Start
“Product overview”
“Getting started”
“Using the earphones”
“FAQ/If a problem occurs ...”
“Specifications”
Sennheiser electronic GmbH & Co. KG
Am Labor 1
30900 Wedemark
Germany
www.sennheiser.com
Version: 11/20 A03
Important safety instructions
Important safety instructions
▷ Read this instruction manual carefully and completely before
using the product.
▷ Always include this instruction manual when passing the product
on to third parties.
▷ Do not use an obviously defective product.
▷ Only use the product in environments where Bluetooth wireless
transmission is permitted.
Preventing damage to health and accidents
▷ Protect your hearing from high volume levels. Permanent
hearing damage may occur when headphones are used
at high volume levels for long periods of time. Sennheiser
headphones sound exceptionally good at low and medium volume
levels.
▷ Do not insert the earphones too deep into your ears and never
insert them without ear adapters. Always remove the earphones
slowly and carefully from your ears.
▷ The product generates stronger permanent magnetic
fields that could cause interference with cardiac pace
makers, implanted defibrillators (ICDs) and other
implants. Always maintain a distance of at least 3.94"/10 cm
between the product component containing the magnet (earbuds
and charging case) and the cardiac pacemaker, implanted
defibrillator, or other implant.
▷ Keep the product, accessories and packaging parts out of reach
of children and pets to prevent accidents. Swallowing and chok
ing hazard.
▷ Do not use the product in an environment that requires your spe-
cial attention (e.g. in traffic or when performing skilled jobs).
-
-
Preventing damage to the product and malfunctions
▷ Always keep the product dry and do not expose it to extreme tem-
peratures (hairdryer, heater, extended exposure to sunlight, etc.)
to avoid corrosion or deformation.
▷ Use only attachments/accessories/spare parts supplied or rec-
ommended by Sennheiser.
▷ Clean the product only with a soft, dry cloth.
Safety instructions for Lithium rechargeable batteries
WARNING
If abused or misused, the rechargeable batteries may leak.
In extreme cases, they may even present a risk of
•explosion,
• fire development,
• heat generation,
•smoke or gas development.
2 | MOMENTUM True Wireless
Important safety instructions
Only use rechargeable batteries and chargers
recommended by Sennheiser.
Charge products with built-in rechargeable batteries at
ambient temperatures between 10 and 40 °C/50 and
104
°F.
Do not heat above 60 °C/140 °F, e.g. do not expose to
sunlight or throw into fire.
When not using the product for extended periods of
time, charge its built-in rechargeable battery regularly
(about every 3 months).
Switch rechargeable battery-powered products off after
use.
Dispose of defective products with built-in rechargeable
batteries at special collection points or return them to
your specialist dealer.
Notes on data collection and processing and on firmware updates
This product stores individual settings such as the volume, the
sound profiles and the Bluetooth connection data of paired devices.
This data is required for the operation of the product and is not trans
ferred to Sennheiser or companies commissioned by Sennheiser and
is not processed.
Using the “Sennheiser Smart Control” app, you can update the firmware of the product for free via an Internet connection. If the device
on which the app is installed is connected to the Internet, the follow
ing data is automatically transferred to and processed by Sennheiser
servers in order to provide and transfer suitable firmware updates:
hardware identifier, hardware revision number, firmware version of
the product, type of the operating system (Android, iOS), version of
the operating system and version of the app. The data will only be
used as specified and will not be stored permanently.
If you do not want this data to be transferred and processed, do not
connect to the Internet.
Intended use/Liability
These headphones have been designed as an accessory for Bluetooth compliant devices. They are intended for wireless audio communication such as music playback and phone calls via Bluetooth
wireless technology.
It is considered improper use when the product is used for any application not named in the corresponding product documentation.
Sennheiser does not accept liability for damage arising from
improper use or misuse of this product and its attachments/acces
sories.
Sennheiser is not liable for damages to USB devices that are not consistent with the USB specifications. Sennheiser is not liable for damages resulting from the loss of connection due to flat or overaged
rechargeable batteries or exceeding the Bluetooth transmission
range.
Before putting into operation, please observe the respective country-specific regulations.
-
-
-
MOMENTUM True Wireless | 3
Package contents
Package contents
Earbud R for right ear (M3IETW R) and
earbud L for left ear (M3IETW L)
Charging case with built-in rechargeable battery for
the earbuds
(M3IETW C)
USB charging cable with USB-C and USB-A connector, approx. 0.25 m
Silicone ear adapters (size XS, S, M (pre-mounted to
the earphones) and L
Quick guide
Safety guide
Online you can find:
• this detailed instruction manual and additional information
(www.sennheiser.com/download)
• the Sennheiser Smart Control app for configuring the headphones and for additional functions
(www.sennheiser.com/smartcontrol)
A list of accessories can be found on the MOMENTUM True
Wireless product page at www.sennheiser.com. Contact your
local Sennheiser partner: www.sennheiser.com > “Service &
Support”.
4 | MOMENTUM True Wireless
Product overview
1 2 394 5
7
7
8
6
Product overview
Charging case
M3IETW C
LED
displays the charging process/charge status of the
rechargeable battery of the charging case or of the
earbuds (when inserted into the charging case)
Input for USB-C connector
for charging the rechargeable batteries
LED button
activates the LED display for 5 seconds
Built-in rechargeable battery for charging the earbuds on
the go
Type plate
Charging compartment for the left earbud L
Magnetic holders
Charging compartment for the right earbud R
Charging contacts
MOMENTUM True Wireless | 5
Product overview
R
L
CC
A
M3IETW L M3IETW R
A
DDE
F
00
F
F
G
B
D
DE
H
H
Earbuds
M3IETW L and M3IETW R
Touch control panel
Changeable silicone ear adapters
Left earbud L (secondary earbud, receives signals from the
right earbud)
Status LED
Magnetic holders
Charging contacts
Microphones for the perception of ambient noise
(“Transparent Hearing”) and for phone calls
Right earbud R (primary earbud, controls the Bluetooth
connection to the smartphone and to the left earbud)
Built-in rechargeable battery
Overview of the LED indications of the charging case
6 | MOMENTUM True Wireless
When a USB cable is connected, the LED of the charging case permanently displays the charging process:
Product overview
2
Press
1x
LED
pulses
yellow
lights up
green
flashes
red
Charging case WITH
earbuds inserted
... earbuds and
charging case are
being charged
... earbuds and
charging case are
fully charged
... a charging error/
battery error has
been detected in at
least one earbud (>
26)
Charging case
WITHOUT earbuds
inserted
... charging case is
being charged
... charging case is
fully charged
... a charging error/
battery error has
been detected in the
charging case (>
26)
If you press the LED button and no USB cable is connected, the LED
of the charging case displays the battery charge status or the
charging process of the earbuds for 5 seconds:
Charging case
WITHOUT earbuds
inserted
... charging case is
charged between
50-100 %
LED
lights up
green
Charging case WITH
earbuds inserted
... earbuds are fully
charged
... earbuds are being
pulses
yellow
charged via the
rechargeable bat
-
tery of the charging
–
case
... rechargeable bat-
lights up
yellow
tery of the charging
case is empty and
the earbuds are not
... charging case is
charged less than
50
%
fully charged
... rechargeable batlights up
red
teries of the earbuds
and the charging
case are empty
... a charging error/
flashes
red
battery error has
been detected in at
least one earbud (>
26)
... rechargeable battery of the charging
case is empty
... a charging error/
battery error has
been detected in the
charging case (>
26)
MOMENTUM True Wireless | 7
Product overview
3x
3x
If the LED does not light up:
• Clean the contacts on the earbuds and in the charging case
(>
25).
• Charge the rechargeable batteries of the earbuds and the
charging case until the LED lights up again (>
12).
Overview of the LED indications of the earbuds
LED Meaning; earbuds ...
flashes red-blue
for approx. 1 min
flashes blue 3
times
flashes red 3
times
lights up blue
lights up red
flashes red
quickly
flashes red
slowly
... in Bluetooth pairing mode
... Bluetooth pairing successful
... Bluetooth pairing failed
... are connected to a device via
Bluetooth
(primary earbud (R) is connected to
the smartphone, secondary earbud
(L) is connected to the primary
earbud (R))
... are not connected to a device via
Bluetooth or the connection has
been lost
(primary earbud (R) is not connected
to a smartphone, secondary earbud
(L) is not connected to the primary
earbud (R))
... rechargeable battery is almost
empty
... system error. Perform a restart >
28).
When you insert the earbuds into your ears, the LEDs of the
earbuds automatically go off after approx. 5 seconds.
8 | MOMENTUM True Wireless
Product overview
Notes on voice prompts
The earphones output voice prompts for the following functions.
Using the Smart Control app, you can change the language of the
voice prompts, choose between voice prompts and beep sounds, or
deactivate the status messages with a few exceptions (e.g.
rechargeable battery is empty).
Voice prompt Meaning/earbuds...
“Power on” ... are switched on
“Power off” ... switch off
“Connected” ... connected via Bluetooth
“No connection” ... not connected via Bluetooth
“Pairing” ... in Bluetooth pairing mode
“Pairing cancelled” ... Bluetooth pairing cancelled
“Pairing successful” ... Bluetooth pairing successful
“Pairing failed” ... Bluetooth pairing not successful
“Recharge headset” ... rechargeable battery almost
empty – recharge the battery
“Call rejected” ... incoming call rejected
“Call ended” ... call ended
“Volume min” ... volume set to minimum
“Volume max” ... volume set to maximum
MOMENTUM True Wireless | 9
Getting started
“Sennheiser Smart Control”
Getting started
1. Waking up the earphones and the charging
case and charging the rechargeable batteries
Upon delivery, the rechargeable batteries of the earphones and the
charging case are in sleep mode and have to be woken up by con
necting them to a power source once.
▷ Insert the earphones into the charging case.
▷ Connect the USB-C cable to the charging case and to a USB
power source (>
The earphones and the charging case are woken up and the
rechargeable batteries are being charged. The earphones are
now ready for use.
12).
-
2. Installing the Smart Control app on your
smartphone
The Sennheiser Smart Control app allows you to use all functions
and settings of the earphones and to e.g. adjust the sound to your
liking using the equalizer (>
15).
10 | MOMENTUM True Wireless
Getting started
LMSXS
RightLeft
R
RL
L
1
3. Connecting the earphones to a Bluetooth
device
Connect the earphones to your smartphone via Bluetooth (> 14).
4. Selecting suitable ear adapters for optimum
fit of the earbuds
The perceived sound quality and bass performance of the earphones
depends to a large extent on the correct fit of the earbuds in the ear.
▷ Test which ear adapter size gives you the best sound quality and
the best wearing comfort.
▷ You can choose between 4 different ear adapters in size XS, S, M
and L (>
▷ Insert the right earbud into your right ear and the left earbud into
your left ear.
▷ Insert the earbuds at a slight angle into the ears and twist them
16).
slightly into the ear canal so that they sit comfortably and snugly
in the ear canal.
MOMENTUM True Wireless | 11
Using the earphones
USB-A
USB-C
LR
1 2
3
Using the earphones
Information on the rechargeable battery, the charging process and the first use
The earbuds and the charging case each have a built-in rechargeable
battery. The charging case allows you to store your earphones safely
at all times while they are being charged.
Rechargeable
battery
Earbuds approx. 4 hours of operating time
Recharging via
charging case
Earbuds inserted
into charging case
Upon delivery, the rechargeable batteries of the earphones and the
charging case are in sleep mode and have to be woken up by con
necting them once to a power source. Sennheiser recommends
charging the earphones and the charging case for a complete
charging cycle without interruption before using for the first time.
A complete charging cycle of the charging case and the earphones
takes about 1.5 hours.
Sennheiser recommends using the supplied USB cable and a compatible standard USB power supply for charging the headphones.
When a USB cable connected to a power source is also connected to
the charging case, the rechargeable battery of the charging case is
being charged. When the earbuds are inserted into the charging box,
their rechargeable batteries are being charged at the same time. The
LED of the charging case displays the charge status (>
When the battery charge drops to a critical level, a voice prompt asks
you to recharge the earphones (“Recharge headset”).
The charge status of the rechargeable battery of the charging case
is displayed by the LED on the charging case (>
Operating/standby time with fully charged
rechargeable batteries
approx. 8 hours (up to 2 additional charging
cycles of the earbuds)
approx. 7 days
-
6).
6).
12 | MOMENTUM True Wireless
Charging the rechargeable battery of the earbuds and the charging case
Using the earphones
1. Open the charging case by overcoming a slight magnetic resistance and insert the left earbud into the left charging compartment and the right earbud into the right charging compartment.
The earbuds are magnetically pulled into the charging compartments.
2. Connect the USB-C connector of the USB cable to the USB-C
socket of the charging case.
3. Connect the USB-A connector to a corresponding socket of a USB
power source (to be ordered separately). Make sure that the USB
power source is connected to the power supply system.
The rechargeable batteries of the earphones and the charging
case are being charged.
If no earphones are inserted into the charging case, only the
rechargeable battery of the charging case is being charged.
The LED of the charging case displays the charge status:
Charging case
WITHOUT earbuds
inserted
... charging case is
being charged
... charging case is
fully charged
... a charging error/
battery error has
been detected in the
charging case (>
26)
LED
yellow
yellow
lights up
green
flashes
red
Charging case WITH
earbuds inserted
... earbuds and
charging case are
being charged
... earbuds and
charging case are
fully charged
... a charging error/
battery error has
been detected in at
least one earbud (>
26)
Connecting the earphones to a Bluetooth device
To be able to use the Bluetooth wireless connection, you must register both devices (earphones and e.g. smartphone) via the device settings of your smartphone. This process is called pairing.
If operation differs from the steps mentioned, also refer to the
instruction manual of the Bluetooth device you are using.
If you switch the earphones on for the first time after initial
charging, they automatically switch to pairing mode.
Information on the Bluetooth wireless connection
The earphones are compatible with Bluetooth 5.0.
If your audio source supports one of the following high-resolution
audio encoding methods, music is automatically played in high audio
quality: aptX, aptX® LL or AAC. Otherwise the headphones will play
your music in normal audio quality (SBC).
MOMENTUM True Wireless | 13
Using the earphones
R
“Pairing“
“Pairing
successful“
5s
Hold
1
3 4
2
max. 50 cm
ON
ON
ON
ON
MOMENTUM
TW
Paired devices establish the Bluetooth wireless connection immediately after switch-on and are ready for use.
When you switch the earphones on, they automatically try to connect to the last connected Bluetooth device. The earphones can save
the connection profiles of up to eight Bluetooth devices with which
they have been paired.
If you pair the earphones with the ninth Bluetooth device, the saved
connection profile of the least used Bluetooth device will be over
written. If you want to re-establish a connection with the overwritten
Bluetooth device, you have to pair the earphones again.
paired and connected Bluetooth device
paired Bluetooth device (currently not connected)
Pairing the earphones with a Bluetooth device
14 | MOMENTUM True Wireless
1. Take both earbuds out of the charging case and insert them into
your ears (>
16). The distance between the earbuds and the Blue-
tooth device should not exceed 50 cm.
Using the earphones
“Sennheiser Smart Control”
2. Simultaneously touch and hold the right and the left touch control
panel for 5 seconds until you hear the voice prompt “Pairing” and
a beep.
The LEDs of the earbuds flash blue and red. The earbuds are in
pairing mode.
3. Activate Bluetooth on your Bluetooth device.
4. Via the menu of your Bluetooth device, start the search for new
Bluetooth devices.
All active Bluetooth devices in the proximity of your smartphone
are displayed.
From the list of found Bluetooth devices, select “MOMENTUM
TW”. If necessary, enter the default pin code “0000”.
If pairing was successful, you hear the voice prompt “Pairing successful” and the LEDs of the earbuds flash blue 3 times.
If no connection is established within 1 minute, pairing mode is
terminated and the earbuds switch to idle mode. If necessary,
repeat the steps described above.
Disconnecting the earphones from a Bluetooth device
▷ Via the menu of your Bluetooth device, disconnect the connection
to the earphones.
The earphones are disconnected from the Bluetooth device. The
earphones then search for other paired devices. If no device is
found, you hear the voice prompt “No connection”. The earphones
switch to idle mode.
If you want to clear the Bluetooth pairing list of the earphones,
reset the earphones to the factory default settings (>
29).
Installing the Smart Control app
To make full use of all the settings and functions of the headphones,
you need to have the free Sennheiser Smart Control app installed on
your smartphone.
Download the app from the App Store or Google Play and install it on
your smartphone. Alternatively, you can use your smartphone to
scan the following QR code or to call up the following Internet site:
(www.sennheiser.com/smartcontrol)
MOMENTUM True Wireless | 15
Using the earphones
LMSXS
Click
RightLeft
R
RL
L
1
▷ Connect your smartphone to the earphones using Bluetooth (>
13).
▷ Start the Smart Control app.
The Smart Control app recognizes the earphones and activates
all available settings and functions.
Selecting suitable ear adapters for optimum fit of the earbuds
The perceived sound quality and bass performance of the earphones
depends to a large extent on the correct fit of the earbuds in the ear.
▷ Pull the ear adapter away from the in-ear sound tunnel.
▷ Mount the new ear adapter to the in-ear sound tunnel. Ensure that
it locks into place.
▷ Test which ear adapter size gives you the best sound quality and
the best wearing comfort.
You can choose between 4 different ear adapters in size XS, S, M
and L. The ear adapters must fit snugly in the ear canal and com
pletely seal your ears.
Inserting the earbuds into the ears
-
▷ Insert the right earbud into your right ear and the left earbud into
your left ear.
▷ Insert the earbuds at a slight angle into the ears and twist them
slightly into the ear canal so that they sit comfortably and snugly
16 | MOMENTUM True Wireless
in the ear canal (>
You can use the right earbud alone without using the left earbud. The left earbud, however, cannot be used alone.
16).
Using the earphones
“Power on“
“Connected“
On
Off
LR
The Smart Pause function automatically stops music playback
if you remove an earbud from your ear (>
20).
Switching the earbuds on
WARNING
Danger of hearing damage due to high volume levels!
Listening at high volume levels can lead to permanent
hearing defects.
▷ Before putting the headphones on, adjust the volume
to a low level (>
▷ Do not continuously expose yourself to high volume
levels.
18).
▷ Take both earbuds out of the charging case and insert them into
your ears (>
If a paired Bluetooth device is within the transmission range, you
hear the voice prompts “Power On” and “Connected”. The LEDs
of the earbuds light up blue.
The earbuds automatically switch to idle mode if they do not
find a paired Bluetooth device within 15 minutes or if they are
inactive for approx. 60 minutes (connected via Bluetooth but no
audio playback). You can wake up the earbuds from idle mode
by touching their touch control panels once or by briefly insert
ing them into the charging case.
16).
Switching the earbuds off
-
The earbuds do not have to be switched off explicitly.
MOMENTUM True Wireless | 17
Using the earphones
Hold
Hold
R
L
▷ Insert the earbuds into the charging case to switch them off.
As soon as the earbuds are inserted into the charging case, they
switch off and are being charged (>
The earbuds automatically switch to idle mode if they do not
find a paired Bluetooth device within 15 minutes or if they are
inactive for approx. 60 minutes (connected via Bluetooth but no
audio playback). You can wake up the earbuds from idle mode
by touching their touch control panels once or by briefly insert
ing them into the charging case.
If you remove an earbud from your ear, music playback is
paused. This Smart Pause function can be deactivated (>
12).
Adjusting the volume
WARNING
Danger of hearing damage due to high volume levels!
Listening at high volume levels can lead to permanent
hearing defects.
▷ Before putting the headphones on and before toggling
between audio sources, adjust the volume to a low
level.
▷ Do not continuously expose yourself to high volume
levels.
-
20).
18 | MOMENTUM True Wireless
To increase the volume:
▷ Touch and hold the touch control panel of the right earbud until
the volume is increased.
To reduce the volume:
▷ Touch and hold the touch control panel of the left earbud until the
volume is reduced.
When the minimum or maximum volume is reached, you hear the
voice prompt “Volume max” or “Volume min”.
You can also adjust the volume using the connected Bluetooth
device or the Smart Control app.
Using the earphones
2x
R
ON/OFF
Listening of ambient noise or conversations - activating/deactivating the Transparent Hearing function
With Transparent Hearing activated, you can hear ambient sounds or
communicate without having to remove the earbuds from your ears.
This allows you to hear e.g. announcements in the train or airplane or
to have short conversations.
▷ Tap the touch control panel of the right earbud 2 times.
The Transparent Hearing mode set in the Smart Control app is
activated. You can hear ambient sounds without having to
remove the earbuds from your ears.
To deactivate Transparent Hearing:
▷ Tap the touch control panel of the right earbud once.
Adjusting the Transparent Hearing function
To be able to fully use Transparent Hearing, you require the Smart
Control app (>
▷ Select the desired Transparent Hearing function in the Smart
Control app:
Transparent Hearing Description
“Keep music playing and
mix with ambient sound”
“No music playback, only
ambient sound”
15).
The audio playback (e.g. music)
continues and is mixed with ambient
sounds.
The audio playback (e.g. music) is
muted and you hear only ambient
sounds.
Using the voice assistant/voice dialing
▷ Tap the touch control panel of the right earbud once.
The available voice assistant of your smartphone is activated
(*depending on the system or app used on your smartphone: Siri,
Google Assistant, Baidu, ...).
▷ Ask the voice assistant your question or make a request.
To disable the voice assistant/voice dialing:
MOMENTUM True Wireless | 19
Using the earphones
1x
R
ON/OFF
Siri, Google Assistant,
Baidu, ...*
L
▷ Tap the touch control panel of the right or left earbud once.
Using the Smart Pause function
The earbuds automatically detect whether they are worn in the ear
or removed from the ear.
Music playback pauses when you remove an earbud from the ear and
continues when you insert it again.
You can also deactivate the function via the Smart Control app.
The right earbud (primary earbud) can be used alone. The left
earbud (secondary earbud) cannot be used alone because it
requires the right earbud for Bluetooth transmission.
Controlling the music playback
The music playback functions are only available when the earphones
and the device are connected via Bluetooth. Some smartphones or
music players may not support all functions.
The left earbud allows you to control music playback.
Playing/pausing music
▷ Tap the touch control panel of the left earbud once.
20 | MOMENTUM True Wireless
Left touch control panel Function
Playing the next track
▷ Tap the touch control panel of the left earbud 2 times.
Tap 1x Plays or pauses music
Using the earphones
R
Left touch control panel Function
Tap 2x Plays the next track in the playlist
Playing the previous track
▷ Tap the touch control panel of the left earbud 3 times.
Left touch control panel Function
Tap 3x Plays the previous track in the playlist
Making calls using the earphones
The call functions are only available when the earphones and the
smartphone are connected via Bluetooth. Some smartphones may
not support all functions.
The right earbud allows you to control the call functions.
Making a call
▷ Dial the desired number on your smartphone.
If your smartphone does not automatically transfer the call to the
earphones, select “MOMENTUM TW” as the audio source on your
smartphone (see the instruction manual of your smartphone if
necessary).
Accepting/rejecting/ending a call
If your earphones are connected to a smartphone and you receive a
call, you hear a ring tone in the earphones.
If you are playing music when you receive a call, the music pauses
until you end the call.
Right touch control panel Function
Tap 1x Accepts a call
Tap 1x
Ends a call
Voice prompt “Call ended”
MOMENTUM True Wireless | 21
Using the earphones
Press
1x
Press
1x
Right touch control panel Function
Tap 2x
Tap 1x
Tap 2x
Rejects a call
Voice prompt “Call rejected”
Accepts an incoming call and ends
the active call
Rejects an incoming call and continues the active call
Displaying the battery charge status
If the earphones are connected to your Bluetooth device, the battery
charge status can be displayed on the screen of your smartphone or
device (depending on the device and operating system used).
The Sennheiser Smart Control app also displays the charge status of
the earphones' rechargeable batteries.
Displaying the battery charge status using the charging case
If no USB cable is connected to the charging case:
▷ Press the LED button of the charging case.
The LED of the charging case displays the battery charge status
for 5 seconds:
Charging case
WITHOUT earbuds
inserted
... charging case is
charged between
50-100 %
LED
lights up
green
Charging case WITH
earbuds inserted
... earbuds are fully
charged
... earbuds are being
yellow
yellow
charged via the
rechargeable bat
-
tery of the charging
–
case
... rechargeable bat-
lights up
yellow
tery of the charging
case is empty and
the earbuds are not
... charging case is
charged less than
50
%
fully charged
22 | MOMENTUM True Wireless
Using the earphones
Charging case
WITHOUT earbuds
inserted
... rechargeable battery of the charging
case is empty
... a charging error/
battery error has
been detected in the
charging case (>
26)
LED
lights up
red
flashes
red
Charging case WITH
earbuds inserted
... rechargeable batteries of the earbuds
and the charging
case are empty
... a charging error/
battery error has
been detected in at
least one earbud (>
26)
Adjusting sound effects/the equalizer
To be able to use the sound effects/equalizer, you require the Smart
Control app (>
▷ In the Smart Control app, select the desired sound effects via the
equalizer.
The sound effects are stored in the earphones. These sound settings are active even without using the Smart Control app, i.e.
when you are using another Bluetooth device.
15).
Setting the voice prompts/beep sounds
To be able to set the voice prompts and beep sounds, you require the
Smart Control app (>
You can change the language of the voice prompts, choose between
voice prompts and beep sounds, or deactivate the status messages
with a few exceptions (e.g. rechargeable battery is empty).
15).
Storing or transporting the earphones in the charging case
Store the earphones in the charging case to prevent damage to the
earphones when you are not using or transporting them. The ear
phones are automatically charged in the charging case so you
always have the full battery life to work with.
▷ Open the charging case by overcoming a slight magnetic resis-
tance and insert the left earbud into the left charging compartment and the right earbud into the right charging compartment.
The earbuds are magnetically pulled into the charging compartments.
▷ Close the charging case.
-
MOMENTUM True Wireless | 23
Using the earphones
LR
24 | MOMENTUM True Wireless
Care and maintenance
LMSXS
Click
Care and maintenance
CAUTION
Liquids can damage the electronics of the product!
Liquids entering the housing of the product can cause a short-circuit
and damage the electronics.
▷ Keep all liquids far away from the product.
▷ Do not use any solvents or cleansing agents.
▷ Clean the product only with a soft, dry cloth.
▷ Clean the charging contacts on the earbuds and in the charging
case from time to time using e.g. a cotton swab.
Changing the ear adapters
For reasons of hygiene, you should replace your ear adapters from
time to time. Spare ear adapters are available from your Sennheiser
partner.
1. Pull the ear adapter away from the in-ear sound tunnel.
2. Mount the new ear adapter to the in-ear sound tunnel. Ensure that
it locks into place.
MOMENTUM True Wireless | 25
Care and maintenance
Information on the built-in rechargeable battery
Sennheiser ensures and guarantees that the rechargeable batteries
perform at their optimum upon purchase of the product. If, upon pur
chase or within the warranty period, you suspect that the rechargeable battery is obviously defective or if a charging error/battery error
is displayed (>
power supply system and immediately return the product to any
Sennheiser service partner.
6), stop using the product, disconnect it from the
Installing firmware updates
Firmware updates can be downloaded free of charge from the Internet using the Sennheiser Smart Control app.
▷ Connect your earphones to your smartphone and start the Smart
Control app (>
▷ The app provides information on available firmware updates and
guides you through the installation process.
15).
-
26 | MOMENTUM True Wireless
FAQ/If a problem occurs ...
FAQ/If a problem occurs ...
Current list of frequently asked questions (FAQ)
Visit the MOMENTUM True Wireless product page at
www.sennheiser.com/truewireless
There you will find a current list of frequently asked questions (FAQ)
and suggested solutions.
The left earbud cannot be used?
Make sure that the earbud is charged (> 12) and that the earphones
are paired with your Bluetooth device and connected to it (> 14). The
left earbud can only be used when the right earbud is also used (the
right earbud controls the Bluetooth transmission). The signal trans
mission range between the left earbud and the right earbud is
approx. 25 cm.
The right earbud cannot be used?
Make sure that the earbud is charged (> 12) and that the earphones
are paired with your Bluetooth device and connected to it (> 14).
-
The earphones cannot be switched on/do not react to any touch?
Wake up the earphones from idle mode by tapping their touch control panels once (> 17).
Make sure that the earphones are charged > 12). If this is the case,
perform a restart of the earphones (> 28).
The earphones cannot be charged?
Perform a restart of the earphones (> 28).
The operating time is decreasing?
The rechargeable batteries are exhausted. Contact your Sennheiser
service partner.
The sound occasionally drops out?
Make sure that the earphones are within the transmission range of
the Bluetooth device (>
The sound is too low?
28).
Increase the volume (> 18).
The sound of the earphones sounds misadjusted?
It might be that the sound has been adjusted using the equalizer
function of the Smart Control app. Connect to the Smart Control app
and check the equalizer settings >
23).
The sound is only audible on one side?
Make sure that both earbuds are charged (> 12) and that the earphones are paired with your Bluetooth device and connected to it (>
14). Also make sure that the earbuds are inserted into your ears correctly (> 16).
MOMENTUM True Wireless | 27
FAQ/If a problem occurs ...
The sound is not in lip-sync with the TV/PC picture?
Make sure you are using a Bluetooth device with aptX Low Latency
(LL) to have low audio latency.
The earphones are uncomfortable?
Test the different ear adapters to find the size that suits you best and
delivers the best sound quality (>
The earphones are connected via the Smart Control app, but music
playback is not possible?
16).
If you connect the earphones only via the Smart Control app, you only
establish the connection for controlling the earphones (via Bluetooth
Low Energy). In order to enable music playback, you have to pair the
earphones with your smartphone using the smartphone's Bluetooth
menu (>
13).
Your question has not been answered or the problem persists?
If a problem occurs that is not listed in the FAQ section or if the problem cannot be solved with the proposed solutions, please contact
your Sennheiser partner for assistance.
To find a Sennheiser partner in your country, search at
www.sennheiser.com > “Service & Support”.
Leaving the Bluetooth transmission range
Wireless calling and streaming are only possible in the Bluetooth
transmission range of your smartphone. The transmission range
largely depends on environmental conditions such as wall thickness,
wall composition etc. With a free line of sight, the transmission
range of most smartphones and Bluetooth devices is up to 10 meters.
If you, and therefore the earphones, leave the Bluetooth transmission
range of the smartphone, the sound quality deteriorates increasingly
until you hear the voice prompt “No connection” and the connection
breaks down completely. If you immediately re-enter the Bluetooth
transmission range of the smartphone, the connection is automati
cally re-established and you hear the voice prompt “Connected”. If
this is not the case, tap the touch control panel of the earbud once.
The right earbud (primary earbud) can be used alone. The left earbud
(secondary earbud) cannot be used alone because it requires the
right earbud for Bluetooth transmission.
Restarting the earphones
If the function of the earphones is disturbed, perform a restart:
▷ Make sure that the contacts on the earbuds and in the charging
case are clean and make contact (the LED of the charging case
lights up when you insert the earbuds into the charging case). If
necessary, clean the contacts (>
25).
▷ Use the USB cable to connect the charging case to a power
source (>
12).
▷ Insert the earbuds into the charging case and, within 60 seconds,
touch and hold the right and the left touch control panel for 6 sec
onds.
The earphones are restarted.
-
28 | MOMENTUM True Wireless
FAQ/If a problem occurs ...
6s
Hold
30s
Hold
Resetting the earphones to the factory default settings/Reset
If the function of the earphones is disturbed and a manual restart (>
28) does not improve, reset the earphones to the factory default settings. This deletes, among other things, all pairing settings.
▷ Make sure that the contacts on the earbuds and in the charging
case are clean and make contact (the LED of the charging case
lights up when you insert the earbuds into the charging case). If
necessary, clean the contacts (>
25).
▷ Use the USB cable to connect the charging case to a power
source (>
12).
▷ Insert the earbuds into the charging case and, within 60 seconds,
touch and hold the right and the left touch control panel for at
least 30 seconds.
The earphones are reset to the factory default settings.
You can also reset the earphones to the factory default settings
using the Smart Control app.
MOMENTUM True Wireless | 29
Specifications
Specifications
MOMENTUM True Wireless M3IETW
Wearing style True wireless stereo earphones
Ear coupling ear canal
Frequency response 5 Hz to 21 kHz
Transducer principle dynamic, closed-back
Transducer size 7 mm
Sound pressure level (SPL) 107 dB (1 kHz/1 mW)
THD (1 kHz, 94 dB SPL) < 0.08 %
Microphone principle MEMS
Microphone frequency
response
Microphone sensitivity 94 dB SPL at 1 kHz
Microphone pick-up pattern
(speech audio)
Power supply built-in Lithium rechargeable
Operating time 4 hrs (music playback via A2DP) with
Standby time approx. 7 days
Charging time of
rechargeable batteries
Temperature range operation: 0 to +40°C
Relative humidity operation: 10 to 80%, non condensing
Magnetic field strength earbuds: 1.6 mT
Ingress protection of the
earbuds
Weight left earbud: approx. 6 g
100 Hz to 10 kHz
2-mic beamforming array
batteries, 3.7 V
left earbud: 60 mAh
right earbud: 85-90 mAh
charging case: 600 mAh
USB charging via USB-C socket of the
charging case: 5 V
rechargeable batteries of the
earbuds;
12 hrs with rechargeable battery of
the charging case
(earbuds inserted into charging case)
approx. 1.5 hours
storage: –25 to +60°C
storage: 10 to 90%
charging case: 130 mT
splash proof (IPX4)
right earbud: approx. 7 g
charging case: approx. 57 g
, 650 mA
30 | MOMENTUM True Wireless
Bluetooth
Version Bluetooth 5.0 compatible, class 1, BLE
Transmission frequency 2,402 MHz to 2,480 MHz
Modulation GFSK, π/4 DQPSK, 8DPSK
Profiles HSP, HFP, AVRCP, A2DP
Specifications
Output power 10 mW (max)
Codec aptX®, aptX® LL, AAC, SBC
Device name MOMENTUM TW
LE-MOMENTUM TW (Bluetooth Low
Energy only)
MOMENTUM True Wireless | 31
Manufacturer Declarations
Manufacturer Declarations
Warranty
Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months
on this product.
For the current warranty conditions, please visit our website at
www.sennheiser.com or contact your Sennheiser partner.
In compliance with the following requirements
• General Product Safety Directive (2001/95/EC)
•Compliant to Sound Pressure Limits according to country specific
requirements
EU declaration of conformity
• RoHS Directive (2011/65/EU)
Hereby, Sennheiser electronic GmbH & Co. KG declares that the
radio equipment type M3IETW L, M3IETW R, M3IETW C is in compli
ance with the Radio Equipment Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.sennheiser.com/download.
-
Notes on disposal
• Battery Directive (2006/66/EC & 2013/56/EU)
• WEEE Directive (2012/19/EU)
The symbol of the crossed-out wheeled bin on the product, the battery/rechargeable battery (if applicable) and/or the packaging indicates that these products must not be disposed of with normal
household waste, but must be disposed of separately at the end of
their operational lifetime. For packaging disposal, please observe the
legal regulations on waste segregation applicable in your country.
Further information on the recycling of theses products can be
obtained from your municipal administration, from the municipal col
lection points, or from your Sennheiser partner.
The separate collection of waste electrical and electronic equipment, batteries/rechargeable batteries (if applicable) and packagings is used to promote the reuse and recycling and to prevent negative effects caused by e.g. potentially hazardous substances
contained in these products. Herewith you make an important con
tribution to the protection of the environment and public health.
Trademarks
Sennheiser is a registered trade mark of
Sennheiser
Apple and the Apple logo are trademarks of Apple Inc., registered in
the U.S. and other countries. App Store is a service mark of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC.
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by Sennhe
iser electronic GmbH & Co. KG is under license.
Qualcomm aptX is a product of Qualcomm Technologies International, Ltd. Qualcomm is a trademark of Qualcomm Incorporated,
registered in the United States and other countries, used with per
mission.
electronic GmbH & Co. KG.
-
-
-
-
32 | MOMENTUM True Wireless
Manufacturer Declarations
aptX is a trademark of Qualcomm Technologies International, Ltd.,
registered in the United States and other countries, used with per
-
mission.
Other product and company names mentioned in the user documentation may be the trademarks or registered trademarks of their
respective holders.
MOMENTUM True Wireless | 33
Loading...