Important safety instructions
Important safety instructions
1. Read these safety instructions and the instruction manual of the product.
2. Keep these safety instructions and the instruction manual of the product. Always include all instructions when passing the product on to third parties.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Only clean the product when it is not connected to the power supply system. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer‘s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Only operate the product from the type of power source specified in the chapter „Specifications“ and indicated on the
power supply unit.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point
where it exits from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When
a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug the power supply unit from the wall socket,
• to completely disconnect the product from the power supply system,
• during lightning storms,
• when not using the product for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
when the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. Only use the supplied power supply unit.
16. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture and objects filled
with liquids, such as vases, should not be placed on this apparatus.
17. When using the supplied device feet, do not place the product on delicate surfaces. Delicate surfaces can become
discolored or stained when they come into contact with the plastic of the device feet.
18. Always ensure that the power supply unit is
• in a safe operating condition and easily accessible,
• properly plugged into the wall socket,
• only operated within the permissible temperature range,
• not covered or exposed to direct sunlight for longer periods of time in order to prevent heat accumulation.
EN DEFRITESPTNLRUZH
Risk of fire due to overloading
Do not overload wall outlets and extension cables as this may result in fire and electric shock.
Intended use
The product is designed for indoor and outdoor use.
The product can be used for commercial purposes.
It is considered improper use when the product is used for any application not named in the corresponding instruction
manual.
Sennheiser does not accept liability for damage arising from improper use or misuse of this product and its attachments/
accessories.
Before putting the products into operation, please observe the respective country-specific regulations!
L 1039-10 | 1
Delivery includes
Delivery includes
• L 1039-10 charger
• NT 12-50C mains unit
• Mains cable (EU, UK, US)
• Instruction manual
• Supplement sheet „Manufacturer declarations“
A list of accessories can be found on the L 1039-10 product page at www.sennheiser.com.
For information on suppliers, contact your local Sennheiser partner: www.sennheiser.com > “Service & Support”.
The L 1039-10 charger
The L 1039-10 charger is part of the Tourguide 1039 system.
The Tourguide 1039 system consists of the EK 1039 receiver and a suitable transmitter of the evolution wireless G3 or
2000 series. The system offers optimum speech transmission for guided tours, small conferences and interpretation
applications with one or several speakers. The use of RF transmission allows freedom of movement for all members of the
group. Due to the possibility of combining the EK 1039 receiver with different transmitters, the system can be optimally
adapted to your individual needs.
The L 1039-10 charger can charge up to ten EK 1039 receivers with their BA 2015 accupacks installed. In addition, the
charger allows you to charge all bodypack receivers or bodypack transmitters of the Sennheiser evolution wireless G3,
evolution wireless G2 or 2000 series.
Product overview
1
4
7
2
3
1
8
7
4
5
1 Carrying handles
2 Charging compartments for up to 10 EK 1039 receivers
(with the BA 2015 accupacks installed)
3 Status LED CHARGE/ERROR, red
4 Mounting holes, e.g. for mounting the charger into a 19"
rack
2 | L 1039-10
5 Cable grip for mains cable
6 Hollow jack socket for connection of NT 12-50C mains
unit
7 Holes for optionally fixing/securing the receivers
8 Status LED READY, green