Sennheiser KK 50 User Manual

KK50

3D line-array element

DATASHEET

Features:

•Unique performance-to-size ratio

•Vertical, Horizontal and 3D line-array applications

•Multiple 2” long-excursion full-range cone drivers

•Wide horizontal coverage

•Electronically protected

•Integrated mounting hardware and accessories

•Selectable 16 Ohm or 64 Ohm impedance

•Selectable channel A or B

•Top quality components for outstanding performance

•Weather proof, suitable for outdoor installations

•Available in black or white

Applications:

•Theatre, Club, Churches

•Front fi ll and under-balcony fi ll

•Portable and installed AV systems

•Stage and AV studio monitoring

The KK50 is a compact, line array element comprised of 8 x	intelligibility.This can be augmented with the KKS50 or KL12
2”neodymiumtransducersinastrongstainlesssteelchassis.	sub to extend the operating frequency range.
Its wide dispersion pattern can be confi gured horizontally	Avariety of accessories provide numerous mounting options
or vertically. A number of KK50 speakers can also be put	for permanent and portable installations.
together in multiple array confi gurations.	KA series amplifi ers have presets specifi cally optimized for
Each speaker can be set for 16 or 64 Ohms eliminating the	KK50 applications. All KK50 components are designed by
need for 70volt transformers in distributed systems. The	the K-array R&D department and custom made under the
KK50 reproduces the full vocal frequency range with clear	K-array quality control system.

www.k-array.com

HP Sound Equipment s.r.l. Viale Roma 7/i - 50037 - San Piero a Sieve (FI), Italy tel. [phone] - fax. [phone] - e-mail: [e-mail]

		KK50
		Acoustics
	Power handling	150 W(AES)
	Impedance	16 Ω or 64 Ω
	Operating
		150 Hz - 19 KHz
	frequency range
	SPL 1W/1mt	92 dB
	Maximum SPL
		114 dB continuous - 120 dB peak
		Coverage
	Horizontal	100°
	Vertical
		10°
		Crossover
	Type	External crossover required
	Frequency
		150 Hz, 24 db/oct suggested minimum
		Transducers
	Full-range	8 x 2” neodymium 0.75” voice coil
		Power Audio Input
	Connectors	2 x 4-pins Speakon
	Wiring	Pin 1+ (IN/OUT 1+) Pin1- (IN/OUT 1-)
		Pin 2+ (IN/OUT 2+) Pin2- (IN/OUT 2-)
		Selection Switches
	Impedance	16 Ω - 64 Ω
	Channel
		CH1 - CH2
		Recommended Amplifiers
		Single ended mode:
		KA7, KA7-7, KA10, KA10-10, KA40
	Type 64 Ω	for up to 16 units each channel
		Bridge mode:
		KA7, KA7-7, KA10, KA10-10
		for up to 8 units each amplifier
	Type 16 Ω	Single ended mode:
		KA7, KA7-7, KA10, KA10-10
		for up to 4 units each amplifier
		Physical
	Dimensions	5.6 x 51.5 x 7 cm (2.2” x 20.28” x 2.76”)
	Weight
		2 Kg (4.41 lbs)

Notes for data

New materials and design are introduced into existing products without previous notice.

Present systems may differ in some respects from those presented in this brochure.

Accessories:

•K-KLINK: Link hardware for Kobra line array elements

•K-KFLY: tilter for flown line array applications

•K-KCLAMP: Clamp for hanging

•K-KWALL: Bracket for wall fixing

•K-KWIRE: 2-channels link cable

•K-K35MM: 35mm adapter

8	KHz
4	KHz
1	KHz	90°

	500 Hz	120°	60°
	250 Hz
	150°		30°
	back 180°		0° front
	-150°		-30°
		-120°	-60°
			-90°
			horizontal
	8 KHz
	4 KHz
	1 KHz
	500 Hz		90
	250 Hz
		120°	60°
	150°		30°
	back 180°		0° front
	-150°		-30°
		-120°	-60°
			-90°

vertical