KK200
3D line-array element
DATASHEET
Features:
•Unique performance-to-size ratio
•Vertical, Horizontal and 3D line-array applications
•Multiple 2” long-excursion full-range cone drivers
•Wide horizontal coverage
•Electronically protected
•Integrated mounting hardware and accessories
•Selectable 4 Ohm or 16 Ohm impedance
•Selectable channel A or B
•Top quality components for outstanding performance
•Weather proof, suitable for outdoor installations
•Available in black or white
Applications:
•Theatre, Club, Churches
•Front fi ll and under-balcony fi ll
•Portable and installed AV systems
•Stage and AV studio monitoring
TheKK200isacompact,linearrayelementcomprisedof32x 2”neodymiumtransducersinastrongstainlesssteelchassis. Its wide dispersion pattern can be confi gured horizontally or vertically. A number of KK200 speakers can also be put together in multiple array confi gurations. Due to their slim profi le and minimum distance between drivers they exhibit excellent phase coherent pattern control.
The speaker has an impedance of 16 Ohms eliminating the need for 70volt transformers in distributed systems. The KK200 reproduces the full vocal frequency range with clear
intelligibility.This can be augmented with the KKS50 or KL12 sub to extend the operating frequency range.
Avariety of accessories provide numerous mounting options for permanent and portable installations.
KA series amplifi ers have presets specifi cally optimized for KK200 applications.
All KK200 components are designed by the K-array R&D department and custom made under the K-array quality control system.
www.k-array.com
HP Sound Equipment s.r.l. Viale Roma 7/i - 50037 - San Piero a Sieve (FI), Italy tel. +39 055 8487222 - fax. +39 055 8487238 - e-mail: info@k-array.com
|
KK200 |
|
|
|
Acoustics |
Power handling |
|
600 W (AES) |
|
Impedance |
4Ω or 16Ω |
Operating frequency range |
|
150 Hz - 19 KHz. |
|
SPL 1W / 1mt |
|
98 dB |
|
Maximum SPL |
|
124 dB continuous - 130 dB peak |
|
|
|
|
Coverage |
Horizontal |
|
100° |
|
Vertical |
|
7° |
|
|
|
|
Cross over |
Type |
|
External Crosover required |
|
Frequency |
|
150 Hz, 24 dB/oct suggested minimum |
|
|
|
|
Transducers |
Full range |
|
32 x 2” Neodymium magnet with 0.75” voice coil |
|
Wiring |
CH.1 (1+ 1-) CH.2 (2+ 2-) |
|
Audio Input |
Connectors |
|
2 x 4-pin Speakon |
|
|
|
|
Selection Switch |
Channel |
|
CH.1 - CH.2 |
|
Impedance |
|
16Ω - 64Ω |
|
|
|
|
Recommended Amplifiers |
Type |
|
KA10, KA10-10, KA40 (for up to 4 x KK200/channel) |
|
|
|
|
Physical |
Dimensions |
|
5.6 x 201.5 x 7 cm (2.2” x 79.33” x 2.76”) |
|
Weight |
|
8 Kg (17.63 lbs) |
|
|
|
|
New materials and design are introduced into existing products |
|
without previous notice. Present systems may differ in some |
|
respects from those presented in this brochure. |
|
|
|
|
|
|
90° |
|
|
|
|
120° |
60° |
|
8 |
KHz |
|
150° |
30° |
|
|
|
|
|||
4 |
KHz |
|
|
|
|
1 |
KHz |
back |
180° |
0° front |
|
500 Hz |
|||||
|
|
|
|||
250 Hz |
|
|
|
||
|
|
|
-150° |
-30° |
|
|
|
|
-120° |
-60° |
|
|
|
|
|
-90° |
Accessories:
•K-KLINK: Link hardware for Kobra line array elements
•K-KFLY: tilter for flown line array applications
•K-KCLAMP: Clamp for hanging
•K-KWALL: Bracket for wall fixing
•K-KWIRE: 2-channels link cable
•K-K35MM: 35mm adapter
|
90° |
120° |
60° |
150° |
30° |
back 180° |
0° front |
-150° |
-30° |
-120° |
-60° |
|
-90° |
horizontal |
|
|
vertical |