Sennheiser HDI 302 User Manual 2
HDI 302
IR Audio Transmission Technology | Receivers
General Description
The HDI 302 is a professional two-channel stethoset receiver for the carrier frequencies 2.3 and 2.8 MHz. It can be switched between operation on channel 1, 2 or stereo
and features outstanding speech intelligibility and very good music reproduction.
It is powered by the environmentally friendly BA 151 accupack. Also available is the
RI 300, a pure stereo receiver.
Tec hnic al D ata
Modulation .........................................wideband FM, stereo
Carrier frequencies ....................................2.3 and 2.8 MHz
AF frequency response ...............................18 – 18,000 Hz
THD.....................................................................................< 1%
Signal-to-noise ratio............................................typ. 64 dB
Max. SPL .........................................................approx. 110 dB
Operating time ................................................ approx. 5 hrs
Weight ..........................approx. 45 g (including accupack)
Features
j
Wideband stethoset receiver for stereo and two-channel applications
(HDI 302 only)
j
Excellent transmission reliability due to carrier frequencies 2.3 and 2.8 MHz
j
High speech intelligibility and very good stereo music reproduction
j
Very easy to use
j
Powered by environmentally friendly NiMH accupack
j
Delivery includes:
HDI 302: 1 x HDI 302 two-channel stethoset receiver, 1 x BA 151 accupack
RI 300: 1 x RI 300 stereo stethoset receiver, 1 x BA 151 accupack
Recommended Accessories
j
BA 151 accupack Cat. No. 004146
j
Charger for two BA 151
L 151-2 European version Cat. No. 004457
L 151-2-120 USA version Cat. No. 004459
L 151-2-UK UK version Cat. No. 004458
j
L 151-10 charging unit for 10 receivers Cat. No. 004494
j
Plug-in mains unit for one L 151-10
NT 92 European version Cat. No. 003357
NT 92-120 USA version Cat. No. 003358
NT 92-UK UK version Cat. No. 003359
j
Plug-in mains unit for two to five L 151-10
NT 2013 European version Cat. No. 003433
NT 2013-120 USA version Cat. No. 003434
NG 2013-UK UK version Cat. No. 054332
j
Replacement earpads, black, firmer version Spare Part No. 037080
j
Replacement earpads, transparent, softer version Spare Part No. 040949
137 mm
Dimensions of the HDI 302
188 mm
20 mm
Product Variants
j
HDI 302: 2-channel stethoset receiver Cat. No. 004392
j
RI 300: Stereo stethoset receiver Cat. No. 004378
HDI 302
IR Audio Transmission Technology | Receivers
The two-channel and stereo versions of Sennheiser’s new stethoset generation
Apertures
for altering
the frequency
response
Two IR receiving
diodes (behind
special plastic
cover)
Channel selector
switch
Inserted BA 151
On/off/volume
control
HDI 302 two-channel stethoset receiver
accupack
operate on the extremely reliable carrier frequencies 2.3 and 2.8 MHz. They are an
ideal choice for applications where reproduction quality is paramount, e.g. for stereo music transmissions.
The most versatile of these receivers is the HDI 302, which can be switched between
stereo operation and reception on channel 1 or 2. This option is very convenient
when you are, for example, planning to set up a high-quality mini interpretation
system. You could transmit two translations on channels 1 and 2 and reinforce the
floor language via a PA system. The RI 300 product variant is a pure stereo receiver,
which cannot be switched between channels.
The HDI 302 and RI 300 are fitted with a squelch which mutes the audio output
when the IR signal becomes too weak, thus avoiding loud hiss. The receivers are
powered by a BA 151 NiMH accupack which can be charged in the L 151-10 charging
unit while remaining in the receivers. Optionally, the L 151-10 also charges spare
accupacks instead of an entire receiver. The charging unit is powered by an NT 92
plug-in mains unit. The L 151-2 charger charges two accupacks and is supplied complete with mains unit. For larger, professional applications, the charging units can
be cascaded. Up to five L 151-10 are then powered via an NT 2013 (or NG 2013-UK)
plug-in mains unit.
Channel selector switch of the HDI 302
Inserting the BA 151 accupack into the HDI 302
Alternative to charging a complete receiver: charging
of a spare accupack in the L 151-10 charging unit
Loading...