Sennheiser SKP 100 G4-G, SKP 100 G4-A, SKP 100 G4-A1, EW 135P G4-G, EW 135P G4-A1 User Manual
...Page 1
Instruction Manual
evolution wireless G4
100 P series
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com
ew 100 P G4 - v1.1
Page 2
Overview 6
ew 100 P G4 series products 7
EK 100 G4 diversity receiver 8
SKM 100 G4 handheld transmitter 9
SK 100 G4 bodypack transmitter 10
SKP 100 G4 plug-on transmitter 11
Accessories 12
Microphones and cables 12
Microphone modules 12
Headset and Lavalier microphones 13
Line connecting cable 13
Rechargeable battery and charger 14
BA 2015 rechargeable battery 14
L 2015 charger 14
Accessories for camera mounting 15
CA 2 camera adapter 15
Additional accessories 16
Color labeling set 16
Microphone clamp 16
The frequency bank system 17
Installing ew 100 P G4 series devices 18
Installing the EK 100 G4 19
Inserting and removing the batteries/rechargeable batteries 19
Battery status 20
Attaching the diversity receiver to a camera 21
Connecting the diversity receiver to a camera 23
Installing the SKM 100 G4 24
Inserting and removing the batteries/rechargeable batteries 24
Battery status 25
Replacing the microphone module 26
Changing the colored ring 27
Installing the SK 100 G4 28
Inserting and removing the batteries/rechargeable batteries 28
Battery status 29
Connecting a microphone to the SK 100 G4 30
Connecting an instrument or line source to the SK 100 G4
31
Attaching the bodypack transmitter to clothing 32
Installing the SKP 100 G4 33
Inserting and removing the batteries/rechargeable batteries 33
Battery status 34
Attaching the plug-on transmitter to the microphone 35
Using ew 100 P G4 series devices 36
Using the EK 100 G4 38
Operating elements of the EK 100 G4 diversity receiver
38
1
Page 3
Switching the EK 100 G4 on and off 40
Lock-off function 41
Displays on the EK 100 G4 display panel 42
Buttons for navigating through the menu 42
Home screen 44
Frequency/Name standard display 44
Frequency Bank/Channel/Name standard display 45
Setting options in the menu 46
Menu structure 47
Sync menu item 48
Squelch menu item 49
Easy Setup menu item 51
Frequency Preset menu item 52
Name menu item 52
AF Out menu item 53
Auto Lock menu item 54
Advanced menu item 55
Advanced -> Tune menu item 56
Only adjusting the frequency 56
Setting the channel and frequency 56
Advanced -> Pilot Tone menu item 56
Advanced -> LCD Contrast menu item 57
Advanced -> Reset menu item 57
Advanced -> Software Revision menu item 57
Using the SKM 100 G4 58
Operating elements of the SKM 100 G4 handheld transmitter 58
Switching the SKM 100 G4 handheld transmitter on and
off 59
Muting the handheld transmitter (AF mute) 60
SKM 100 G4 60
SKM 100 G4-S 60
Deactivating the RF signal (RF mute) 61
Lock-off function 62
Displays on the SKM 100 G4 handheld transmitter display panel 63
Select a standard display 64
Buttons for navigating the SKM 100 G4 menu 65
Navigating through the menu 65
Making changes in a menu item 65
Setting options in the menu 66
Sensitivity menu item 67
Frequency Preset menu item 68
Name menu item 68
Auto Lock menu item 69
Advanced menu item 70
Advanced > Tune menu item 71
Only adjusting the frequency 71
Setting the channel and frequency 71
Advanced > Mute Mode menu item (SKM 100 G4-S only)
72
Advanced > Pilot Tone menu item 72
2
Page 4
Advanced > LCD Contrast menu item 72
Advanced > Reset menu item 73
Advanced > Software Revision menu item 73
Using the SK 100 G4 74
Operating elements of the SK 100 G4 bodypack transmitter 74
Switching the SK 100 G4 bodypack transmitter on and off
75
Muting the bodypack transmitter (AF mute) 76
Deactivating the RF signal (RF mute) 77
Deactivating the RF signal with the MUTE switch 77
Deactivating the RF signal with the ON/OFF button 78
Lock-off function 79
Displays on the SK 100 G4 bodypack transmitter display
panel 80
Select a standard display 81
Buttons for navigating the SK 100 G4 menu 82
Navigating through the menu 82
Making changes in a menu item 82
Setting options in the menu 83
Sensitivity menu item 84
Frequency Preset menu item 84
Name menu item 85
Auto Lock menu item 85
Advanced menu item 86
Advanced > Tune menu item 87
Only adjusting the frequency 87
Setting the channel and frequency 87
Advanced > Mute Mode menu item 88
Advanced > Cable Emulation menu item 88
Advanced > Pilot Tone menu item 89
Advanced > LCD Contrast menu item 89
Advanced > Reset menu item 89
Advanced > Software Revision menu item 89
Using the SKP 100 G4 90
Operating elements of the SKP 100 G4 plug-on transmitter 90
Switching the SKP 100 G4 plug-on transmitter on and off
91
Muting the plug-on transmitter (AF mute) 92
Deactivating the RF signal (RF mute) 93
Deactivating the RF signal with the MUTE switch 93
Deactivating the RF signal with the ON/OFF button 94
Lock-off function 95
Displays on the SKP 100 G4 plug-on transmitter display
panel 96
Select a standard display 97
Buttons for navigating the SKP 100 G4 menu 98
Navigating through the menu 98
Making changes in a menu item 98
Setting options in the menu 99
3
Page 5
Sensitivity menu item 100
Frequency Preset menu item 100
Name menu item 101
Auto Lock menu item 101
Advanced menu item 102
Advanced > Tune menu item 103
Only adjusting the frequency 103
Setting the channel and frequency 103
Advanced > Mute Mode menu item 104
Advanced > Pilot Tone menu item 104
Advanced > LCD Contrast menu item 104
Advanced > Reset menu item 105
Advanced > Software Revision menu item 105
Establishing a radio link 106
Setting notes 106
Synchronizing devices 107
Overview 108
Product variants 109
EK 100 G4 product variants 109
Made in Germany 109
Assembled in the USA 109
SKM 100 G4 product variants 110
Made in Germany 110
Assembled in the USA 110
SK 100 G4 product variants 111
Made in Germany 111
Assembled in the USA 111
SKP 100 G4 product variants 112
Made in Germany 112
Assembled in the USA 112
Frequency tables 113
Specifications 114
EK 100 G4 115
RF characteristics 115
AF characteristics 116
Overall device 116
SKM 100 G4 117
RF characteristics 117
AF characteristics 117
Overall device 118
SK 100 G4 119
RF characteristics 119
AF characteristics 119
Overall device 120
SKP 100 G4 121
RF characteristics 121
AF characteristics 122
Overall device 122
Pin assignment 123
3.5 mm stereo jack plug 123
4
Page 6
3.5 mm mic jack plug 123
3.5 mm line jack plug 123
6.3 mm stereo jack plug, balanced (audio in/loop out)
123
6.3 mm mono jack plug, unbalanced 124
6.3 mm stereo jack plug for headphone jack 124
XLR-3 plug, balanced 124
Hollow jack plug for power supply 124
Cleaning and maintenance 125
Cleaning the sound inlet basket of the microphone mo-
dule 125
Contact 127
Instruction manual as a PDF 127
Customer service 127
Feedback 127
5
Page 7
PRODUCT INFORMATION
Overview
Overview
You can find information about the individual products in the ew 100 P G4
series under “ew 100 P G4 series products”.
For information about the available accessories, see “Accessories”.
You can find information about the ew 100 P G4 series frequency bank system under “The frequency bank system”.
6
Page 8
ew 100 P G4 series products
ew 100 P G4 series products
Click the name of the particular product to learn more about it.
You can also find more information here:
•A variety of frequency variants are available from the individual
products. You can find more information under “Product variants”.
• You can find technical specifications about the individual products under “Specifications”.
• You can find information about installing the products under “Installing
ew 100 P G4 series devices”.
• You can find information about operating the products under “Using
ew 100 P G4 series devices”.
7
Page 9
EK 100 G4 diversity receiver
►
You can find more detailed information about the EK 100 G4 in the following sections:
• Installation and Startup: “Installing the EK 100 G4”
• Operation: “Using the EK 100 G4”
• Technical Data: “EK 100 G4”
8
Page 10
SKM 100 G4 handheld transmitter
►
SKM 100 G4 variant:
►
SKM 100 G4-S variant:
►
The SKM 100 G4 handheld transmitter is also available in the SKM 100 G4S variant with an integrated mute switch.
You can find more detailed information about the SKM 100 G4 in the following sections:
• Installation and Startup: “Installing the SKM 100 G4”
• Operation: “Using the SKM 100 G4”
• Technical Data: “SKM 100 G4”
9
Page 11
SK 100 G4 bodypack transmitter
►
You can find more detailed information about the SK 100 G4 in the following sections:
• Installation and Startup: “Installing the SK 100 G4”
• Operation: “Using the SK 100 G4”
• Technical Data: “SK 100 G4”
10
Page 12
SKP 100 G4 plug-on transmitter
►
You can find more detailed information about the SKP 100 G4 in the following sections:
• Installation and Startup: “Installing the SKP 100 G4”
• Operation: “Using the SKP 100 G4”
• Technical Data: “SKP 100 G4”
11
Page 13
Accessories
Accessories
A variety of accessories are available for the ew 100 P G4 series.
Microphones and cables
Microphone modules
We recommend using the following microphone modules with the
SKM 100 G4 and SKM 100 G4-S handheld transmitters.
►
Module Features Article
no.
MMD 835-1 BK Dynamic, cardioid, black 502575
MMD 845-1 BK Dynamic, super-cardioid, black 502576
MME 865-1 BK Capacitor, super-cardioid, black 502581
MMD 935-1 BK Dynamic, cardioid, black 502577
MMD 945-1 BK Dynamic, super-cardioid, black 502579
MMK 965-1 BK Capacitor, switchable
Cardioid/super-cardioid, black
MMK 965-1 NI Capacitor, switchable
Cardioid/super-cardioid, nickel
MMD 42-1 Dynamic, omni-directional, black 506772
You can find more information about the individual microphone modules on their respective product pages at www.sennheiser.com.
502582
502584
12
Page 14
Accessories
Headset and Lavalier microphones
We recommend using the following Lavalier microphones and headset microphones with the SK 100 G4 bodypack transmitter.
►
Microphone Features Article
no.
ME 2-II Lavalier microphone, omni-direc-
tional, black
ME 3-II Headset microphone, cardioid,
black
ME 4-N Lavalier microphone, cardioid,
black
MKE 1-ew Lavalier microphone, omni-direc-
tional, black
MKE 1-ew-3 Lavalier microphone, omni-direc-
tional, beige
MKE 2-ew Gold Lavalier microphone, omni-direc-
tional, black
MKE 2 ew-3 Gold Lavalier microphone, omni-direc-
tional, beige
MKE 40-ew Lavalier microphone, cardioid,
black
SL Headmic 1 BE Headband microphone, omni-di-
rectional,
beige
507437
506295
005020
502876
502879
009831
009832
500527
506272
SL Headmic 1 BK Headband microphone, omni-di-
506271
rectional,
black
SL Headmic 1 SB Headband microphone, omni-di-
506904
rectional,
silver
You can find more information about the individual microphones on
their respective product pages at www.sennheiser.com.
Line connecting cable
The following cables can be used to connect cameras to the EK 100 G4 diversity receiver:
• CL 1
3.5 mm jack plug on lockable 3.5 mm jack plugs
Article no. 005022
• CL 100
XLR-3 on a 3.5 mm jack plug
Article no. 087046
13
Page 15
Accessories
Rechargeable battery and charger
BA 2015 rechargeable battery
The BA 2015 rechargeable battery is designed for use with evolution wireless G4 series handheld transmitters, bodypack transmitters and
bodypack receivers.
Article no. 009950
►
L2015 charger
The BA 2015 rechargeable battery can be charged in the L 2015 charger on
its own or inside of the bodypack transmitter/bodypack receiver.
Article no. 009828
►
14
Page 16
Accessories
Accessories for camera mounting
CA 2 camera adapter
Camera adapter with hot shoe for portable bodypack transmitters/receivers from the ew G1, G2, G3 and G4 series.
Article no. 009986
►
15
Page 17
Additional accessories
Color labeling set
• KEN 2, color labeling set for SKM handheld transmitters
Article no. 530195
►
Accessories
Microphone clamp
• MZQ 1, microphone clamp for SKM handheld transmitters
Article no. 076670
►
16
Page 18
The frequency bank system
The frequency bank system
There are different frequency ranges in the UHF band available for transmission.
The following frequency ranges are available for the ew 100 G4 series:
• A1 range: 470 – 516 MHz
• A range: 516 – 558 MHz
• AS range: 520 – 558 MHz
• G range: 566 – 608 MHz
• GB range: 606 – 648 MHz
• B range: 626 – 668 MHz
• C range: 734 – 776 MHz
• D range: 780 – 822 MHz
• JB range: 806 – 810 MHz
• E range: 823 – 865 MHz
• K+ range: 925 – 937.5 MHz
Every frequency range has 21 frequency banks with up to 12 channels:
►
You can find information about the frequency presets in the frequency tables of the respective frequency ranges under “Frequency tables”.
17
Page 19
Installing ew 100 P G4 series devices
INSTALLATION
Installing ew 100 P G4 series devices
You can find information about installing and connecting
ew 100 P G4 series devices in the following sections.
• EK 100 G4 diversity receiver >> “Installing the EK 100 G4”
• SKM 100 G4 handheld transmitter >> “Installing the SKM 100 G4”
• SK 100 G4 bodypack transmitter >> “Installing the SK 100 G4”
• SKP 100 G4 plug-on transmitter >> “Installing the SKP 100 G4”
You can find information about operating the products under “Using
ew 100 P G4 series devices”.
18
Page 20
Installing the EK 100 G4
Installing the EK 100 G4
These sections contain detailed information about installing the
EK 100 G4.
You can find information about operating the EK 100 G4 under “Using the
EK 100 G4”.
Inserting and removing the batteries/rechargeable batteries
You can operate the diversity receiver either with batteries (AA, 1.5 V) or
with the rechargeable Sennheiser BA 2015 battery.
▷ Press the two catches and open the battery compartment cover.
▷ Insert the batteries or the rechargeable battery as shown below. Please
observe correct polarity when inserting the batteries.
►
▷ Close the battery compartment.
The cover locks into place with an audible click.
19
Page 21
Battery status
Charge status of the batteries:
►
Charge status is critical (LOW BATT):
►
Installing the EK 100 G4
20
Page 22
Installing the EK 100 G4
Attaching the diversity receiver to a camera
You can attach the diversity receiver on the hot shoe of the camera with the
included CA 2 camera kit.
To attach the EK 100 G4 diversity receiver to a camera:
▷ Determine where on the perforated plate you need to attach the hot
shoe adapter so that the diversity receiver can be optimally attached to
the camera.
▷ Place a square nut under the perforated plate at this position.
▷ Affix the hot shoe adapter to the perforated plate with the square nut.
▷ Lift the belt clip.
▷ Press one side of the clip downward on the fixing hole and pull it out of
the housing.
▷ Do the same thing on the other side.
21
Page 23
Installing the EK 100 G4
▷ Place the perforated plate on the rear side of the diversity receiver.
▷ Reattach the clip.
▷ Slide the receiver onto a camera.
22
Page 24
Installing the EK 100 G4
Connecting the diversity receiver to a camera
To connect the diversity receiver to a camera:
▷ Attach the line input of the camera to the jack socket of the receiver us-
ing one of the enclosed line connecting cables.
▷ Adjust the level of the AF Out audio output in the operating menu of the
diversity receiver based on the input level of the camera (see “AF Out
menu item”).
The shielding of the line cable acts as an antenna for the second diversity branch. For details on the pin assignment, see “Pin assignment”.
23
Page 25
Installing the SKM 100 G4
Installing the SKM 100 G4
These sections contain detailed information about installing and starting
up the SKM 100 G4.
You can find information about operating the SKM 100 G4 under “Using
the SKM 100 G4”.
Inserting and removing the batteries/rechargeable batteries
You can operate the wireless microphone either with batteries (AA, 1.5 V)
or with the rechargeable Sennheiser BA 2015 battery.
▷ Screw the rear part of the wireless microphone in the direction of the
arrow (counter-clockwise) off of the handle of the wireless microphone.
When you remove the wireless microphone during operation, mute is
automatically activated. MUTE appears in the display panel. When
you screw the microphone back together, mute is deactivated.
▷ Pull the rear part of the wireless microphone all the way out.
▷ Open the cover of the battery compartment.
▷ Place the batteries or the BA 2015 rechargeable battery in the battery
compartment as shown on the cover. Please observe correct polarity
when inserting the batteries/accupack.
▷ Close the cover.
▷ Push the battery compartment into the handle of the wireless micro-
phone.
▷ Screw the rear part of the wireless microphone back onto the handle.
24
Page 26
Battery status
Charge status of the batteries:
►
Installing the SKM 100 G4
Charge status is critical (LOW BATT):
►
25
Page 27
Installing the SKM 100 G4
Replacing the microphone module
You can find a list of the recommended microphone modules for the handheld transmitter under “Microphones and cables”.
To change the microphone module:
▷ Unscrew the microphone module.
▷ Screw the desired microphone module on.
►
Do not touch the wireless microphone contacts or the microphone
module contacts. If you touch the contacts, they may become dirty or
bent.
When you unscrew the microphone module during operation, mute is automatically activated. MUTE appears in the display panel. When you screw
the microphone module back on, mute is deactivated.
26
Page 28
Installing the SKM 100 G4
Changing the colored ring
To change the colored ring:
▷ Pull the colored ring off as shown in the diagram.
►
▷ Attached a colored ring in the color you want as shown in the diagram.
►
27
Page 29
Installing the SK 100 G4
Installing the SK 100 G4
These sections contain detailed information about installing and starting
up the SK 100 G4.
You can find information about operating the SK 100 G4 under “Using the
SK 100 G4”.
Inserting and removing the batteries/rechargeable batteries
You can operate the bodypack transmitter either with batteries (AA, 1.5 V)
or with the rechargeable Sennheiser BA 2015 battery.
▷ Press the two catches and open the battery compartment cover.
▷ Insert the batteries or the rechargeable battery as shown below. Please
observe correct polarity when inserting the batteries.
►
▷ Close the battery compartment.
The cover locks into place with an audible click.
28
Page 30
Battery status
Charge status of the batteries:
►
Installing the SK 100 G4
Charge status is critical (LOW BATT):
►
29
Page 31
Installing the SK 100 G4
Connecting a microphone to the SK 100 G4
You can find a list of recommended Lavalier and headset microphones for
the bodypack transmitter under “Microphones and cables”.
To connect a microphone to the bodypack transmitter:
▷ Insert the cable’s 3.5 mm jack plug into the MIC/LINE socket on the
bodypack transmitter as shown in the diagram.
▷ Screw the plug’s coupling ring onto the audio socket thread of the
bodypack transmitter.
30
Page 32
Installing the SK 100 G4
Connecting an instrument or line source to the SK 100 G4
You can connect instruments or audio sources with a line level to the
bodypack transmitter.
To do this, you will need the Ci 1-N (6.3 mm jack plug on a lockable 3.5 mm
jack plug) or CL 2 (XLR-3F plug on lockable 3.5 mm jack plug) Sennheiser
cables.
To connect an instrument or line source to bodypack transmitter:
▷ Insert the cable’s 3.5 mm jack plug into the MIC/LINE socket on the
bodypack transmitter as shown in the diagram.
▷ Screw the plug’s coupling ring onto the audio socket thread of the
bodypack transmitter.
31
Page 33
Installing the SK 100 G4
Attaching the bodypack transmitter to clothing
You can use the belt clip to attach the bodypack transmitter to your waistband or on a guitar strap.
The belt clip is detachable so that you can also attach the bodypack transmitter with the antenna pointing downwards. To do so, withdraw the belt
clip from its fixing points and attach it the other way round.
The belt clip is secured so that it cannot slide out of its fixing points accidentally.
►
To detach the belt clip:
▷ Lift the belt clip as shown in the diagram.
▷ Press one side of the clip downward on the fixing hole and pull it out of
the transmitter housing.
▷ Do the same thing on the other side.
32
Page 34
Installing the SKP 100 G4
Installing the SKP 100 G4
These sections contain detailed information about installing the
SKP 100 G4.
You can find information about operating the SKP 100 G4 under “Using the
SKP 100 G4”.
Inserting and removing the batteries/rechargeable batteries
You can operate the plug-on transmitter either with batteries (AA, 1.5 V) or
with the rechargeable Sennheiser BA 2015 battery.
▷ Slide the battery compartment cover in the direction of the embossed
arrow and open the cover.
▷ Insert the batteries or the accupack as shown below. Please observe
correct polarity when inserting the batteries/accupack.
▷ Close the battery compartment.
The cover locks into place with an audible click.
33
Page 35
Battery status
Charge status of the batteries:
►
Installing the SKP 100 G4
Charge status is critical (LOW BATT):
►
34
Page 36
Installing the SKP 100 G4
Attaching the plug-on transmitter to the microphone
Microphones with a metal casing should be used for optimal signal
transmission.
▷ Loosen the locking ring (2) by rotating it in the clockwise direction past
the center point.
This unlocks the XLR-3 plug (1) of the plug-on transmitter.
▷ Connect the plug-on transmitter's XLR-3 plug (1) to the XLR-3 socket of
the microphone.
▷ Tighten the locking ring (2) by rotating it counter-clockwise in the di-
rection of the arrow.
35
Page 37
Using ew 100 P G4 series devices
OPERATION
Using ew 100 P G4 series devices
You can find information about using ew 100 P G4 series devices in the following sections.
• EK 100 G3 diversity receiver >> “Using the EK 100 G4”
• SKM 100 G3 handheld transmitter >> “Using the SKM 100 G4”
• SK 100 G3 bodypack transmitter >> “Using the SK 100 G4”
• SKP 100 G3 plug-on transmitter >> “Using the SKP 100 G4”
You can find information about installing the products under “Installing ew 100 P G4 series devices”.
36
Page 38
Using ew 100 P G4 series devices
In the sections below, you can find important information about specific
use cases.
• Establishing a radio link between the transmitter and receiver >> “Establishing a radio link”
• Synchronizing the receiver settings to the transmitter >> “Synchronizing devices”
•Using the menu of the diversity receiver >> “Displays on the EK 100 G4
display panel”
•Using the menu of the handheld transmitter >> “Displays on the
SKM 100 G4 handheld transmitter display panel”
•Using the menu of the bodypack transmitter >> “Displays on the
SK 100 G4 bodypack transmitter display panel”
• Using the menu of the plug-on transmitter >> “Displays on the
SKP 100 G4 plug-on transmitter display panel”
37
Page 39
Using the EK 100 G4
Using the EK 100 G4
These sections contain detailed information about using the EK 100 G4.
You can find information about installing the EK 100 under “Installing the
EK 100 G4”.
Operating elements of the EK 100 G4 diversity receiver
►
1 Display panel
• See “Displays on the EK 100 G4 display panel”
2 Operation and battery indicator, red LED
• illuminated = ON
See “Switching the EK 100 G4 on and off”
•flashing = LOW BATTERY
See “Inserting and removing the batteries/rechargeable batteries”
3 Wireless reception indicator, green LED
• illuminated = RF
38
Page 40
Using the EK 100 G4
4 UP button
• See “Buttons for navigating through the menu”
5 SET button
• See “Buttons for navigating through the menu”
6 DOWN button
• See “Buttons for navigating through the menu”
7 ON/OFF button with ESC function in the operating menu
• Switch the transmitter on or off
See “Switching the EK 100 G4 on and off”
• Escape function in the menu
See “Buttons for navigating through the menu”
8 Infra-red interface
• See “Synchronizing devices”
9 3.5 mm jack socket
•lockable
See “Connecting the diversity receiver to a camera”
39
Page 41
Using the EK 100 G4
Switching the EK 100 G4 on and off
▷ Press the two catches and open the battery compartment cover.
To switch the receiver on:
▷ Hold down the ON/OFF button until the Sennheiser logo appears on the
display.
To switch the receiver off:
▷ Hold down the ON/OFF button until the display goes off.
40
Page 42
Using the EK 100 G4
Lock-off function
You can set the automatic lock-off function in the Auto lock menu (see
“Auto Lock menu item”).
When you have switched on the lock-off function, you will have to turn the
transmitter off and on again in order to operate it.
To temporarily deactivate the lock-off function:
▷ Press the SET button.
Locked appears in the display panel.
▷ Press the UP or DOWN button.
Unlock? appears in the display panel.
▷ Press the SET button.
Lock-off function is now temporarily deactivated.
When you are in the operating menu
>> Lock-off function is deactivated long enough for you to work in the operating menu.
When one of the standard displays is shown
>> Lock-off function is automatically activated after 10 seconds.
The Lock-off function icon flashes while the lock-off function is being activated again.
41
Page 43
Using the EK 100 G4
Displays on the EK 100 G4 display panel
Status information such as reception quality, battery status, audio level,
etc. is displayed on the home screen of the display panel. See “Home
screen”.
The display panel also displays the operating menu which you can use to
configure all of the settings. See “Setting options in the menu”.
Buttons for navigating through the menu
To navigate through the EK 100 G3 operating menu, you need the following
buttons.
42
Page 44
Using the EK 100 G4
►
Press the ON/OFF button
• ESC function: Cancels the entry and returns to the current standard display
• Selects a standard display (see “Home screen”)
►
Press the SET button
• Changes from the current standard display to the operating menu
• Calls up a menu item
• Changes to a submenu
• Stores the settings and returns to the operating menu
►
Press the UP or DOWN button
• Changes to the previous or next menu item
• Changes the setting of a menu item
43
Page 45
Using the EK 100 G4
Home screen
After you switch on the receiver, the display panel initially displays the
Sennheiser logo. After a short time, the home screen is then displayed.
The home screen has two different standard displays.
▷ Short-press the ON/OFF button to switch between the standard dis-
plays.
Frequency/Name standard display
►
1 RF RF level (radio frequency)
• RF signal level display
• including the display of the squelch threshold (see “Squelch menu
item”)
2 AF audio level (audio frequency)
• Displays the audio level of the received transmitter
When the display shows full deflection, the audio input level is excessively high.
• See “AF Out menu item”
3 Frequency
• Current receiving frequency
• See “Frequency Preset menu item”
4 Name
• Freely selectable name of the receiver
• See “Name menu item”
5 Lock-off function
• Lock-off function is activated on the receiver
• See “Lock-off function”
6 Battery status of the receiver
• See “Inserting and removing the batteries/rechargeable batteries”
7 MUTE muting function
•No RF signal received
44
Page 46
Using the EK 100 G4
8 P pilot tone
• P = Activated pilot tone evaluation
• No symbol = Evaluation is deactivated
• P is black = Pilot tone is being received on the current frequency
• See “Advanced -> Pilot Tone menu item”
Frequency Bank/Channel/Name standard display
The Frequency Bank/Channel/Name standard display shows the level of
the line output AF Out instead of the MUTE muting function.
►
B.Ch:
ew100 G4
AFRF
P
+6dB
1. 1
45
Page 47
Using the EK 100 G4
Setting options in the menu
In the EK 100 G4 menu, you can configure the following settings.
Synchronizing the transmitter with the diversity receiver
▷ See “Sync menu item”
Adjusting the squelch threshold
▷ See “Squelch menu item”
Scanning for unused frequency presets, releases and selects frequency presets
▷ See “Easy Setup menu item”
Setting the frequency bank and the channel
▷ See “Frequency Preset menu item”
Entering a freely selectable name
▷ See “Name menu item”
Adjusting the audio output level
▷ See “AF Out menu item”
Activate/deactivate the automatic lock-off function
▷ See “Auto Lock menu item”
Configuring enhanced settings in the Advanced Menu:
• Adjusting the receiving frequencies for the U frequency bank
• Activating/deactivating the pilot tone evaluation
• Adjusting the contrast of the display panel
• Resetting the receiver
• Displaying the current software revision
▷ See “Advanced menu item”
46
Page 48
Using the EK 100 G4
Menu structure
The figure shows the complete EK 100 G4 menu structure in an overview.
47
Page 49
Using the EK 100 G4
Sync menu item
In the Sync menu item you can synchronize ew 100 P G4 series transmitters and receivers.
For more information, see “Synchronizing devices”.
48
Page 50
Using the EK 100 G4
Squelch menu item
You can adjust the squelch threshold in the Squelch menu item.
Setting range:
• Low >> 5 dBμV
• Middle >> 15 dBμV
• High >> 25 dBμV
The squelch threshold is displayed on the home screen in the RF signal level area.
►
To open the Squelch menu item:
▷ On the home screen, press the SET button to open the operating menu.
▷ Press the UP or DOWN button until the Squelch menu item appears in
the selection frame.
▷ Press the SET button to open the menu item.
▷ Adjust the settings as desired.
►
▷ Press the SET button to save the changes you made to the settings.
or
▷ Press the ON/OFF button to cancel the entry without saving the set-
tings.
49
Page 51
Using the EK 100 G4
CAUTION
Risk of hearing and material damage
If you set the squelch threshold to a very low value, a very loud hissing
noise can occur in the receiver. This hissing noise can be loud enough to
cause hearing damage or overload your system’s loudspeakers.
▷ Before adjusting the squelch threshold, set the volume of the audio out-
put to the minimum.
▷ Never change the squelch threshold during a live transmission.
50
Page 52
Using the EK 100 G4
Easy Setup menu item
You can scan for unused frequencies using the Easy Setup menu item.
Switch off all transmitters before you perform the scan. If transmitters are still switched on, they are detected as unavailable frequencies and the frequencies that are actually available cannot then be
used.
To open the Easy Setup menu item:
▷ On the home screen, press the SET button to open the operating menu.
▷ Press the UP or DOWN button until the Easy Setup menu item appears
in the selection frame.
▷ Press the SET button to open the menu item.
▷ Adjust the settings as desired.
• Scan New List: Automatically searches for unused receiving frequencies (frequency preset scan):
►
• Current List: Selects an unused frequency preset:
►
• Reset List: Releases all occupied frequency presets and selects an
unused frequency preset:
►
▷ Press the SET button to save the changes you made to the settings.
51
Page 53
Using the EK 100 G4
or
▷ Press the ON/OFF button to cancel the entry without saving the set-
tings.
Frequency Preset menu item
In the Frequency Preset menu item, you can adjust the receiving frequency of the receiver by adjusting the frequency bank and the channel.
To open the Frequency Preset menu item:
▷ On the home screen, press the SET button to open the operating menu.
▷ Press the UP or DOWN button until the Frequency Preset menu item
appears in the selection frame.
▷ Press the SET button to open the menu item.
▷ Adjust the settings as desired.
►
▷ Press the SET button to save the changes you made to the settings.
or
▷ Press the ON/OFF button to cancel the entry without saving the set-
tings.
Name menu item
In the Name menu item you can enter a name for the radio link.
To open the Name menu item:
▷ On the home screen, press the SET button to open the operating menu.
▷ Press the UP or DOWN button until the Name menu item appears in the
selection frame.
▷ Press the SET button to open the menu item.
▷ Adjust the settings as desired.
►
▷ Press the SET button to save the changes you made to the settings.
or
▷ Press the ON/OFF button to cancel the entry without saving the set-
tings.
52
Page 54
Using the EK 100 G4
AF Out menu item
In the AF Out menu item you can adjust the level of the line audio output
based on the level of the connected camera.
Setting range:
• -30 dB to +12 dB in 6 dB steps
To open the AF Out menu item:
▷ On the home screen, press the SET button to open the operating menu.
▷ Press the UP or DOWN button until the AF Out menu item appears in
the selection frame.
▷ Press the SET button to open the menu item.
▷ Adjust the settings as desired.
►
▷ Press the SET button to save the changes you made to the settings.
or
▷ Press the ON/OFF button to cancel the entry without saving the set-
tings.
53
Page 55
Using the EK 100 G4
Auto Lock menu item
In the Auto Lock menu item you can activate or deactivate the auto lockoff function.
You can find information about temporarily deactivating the lock-off
function during operation under “Lock-off function”.
To open the Auto Lock menu item:
▷ On the home screen, press the SET button to open the operating menu.
▷ Press the UP or DOWN button until the Auto Lock menu item appears
in the selection frame.
▷ Press the SET button to open the menu item.
▷ Adjust the settings as desired.
►
▷ Press the SET button to save the changes you made to the settings.
or
▷ Press the ON/OFF button to cancel the entry without saving the set-
tings.
54
Page 56
Using the EK 100 G4
Advanced menu item
In the Advanced submenu you can configure enhanced settings.
To open the Advanced submenu:
▷ On the home screen, press the SET button to open the operating menu.
▷ Press the UP or DOWN button until the Advanced menu item appears
in the selection frame.
▷ Press the SET button to open the menu item.
The following sub-items are available:
Adjusting the receiving frequency for the frequency bank U
▷ See “Advanced -> Tune menu item”
Activating/deactivating the pilot tone evaluation
▷ See “Advanced -> Pilot Tone menu item”
Adjusting the contrast of the display panel
▷ See “Advanced -> LCD Contrast menu item”
Resetting the receiver
▷ See “Advanced -> Reset menu item”
Displaying the current software revision
▷ See “Advanced -> Software Revision menu item”
55
Page 57
Using the EK 100 G4
Advanced -> Tune menu item
In the Tune menu item of the Advanced submenu, you can configure the
receiving frequencies for the U frequency bank.
Only adjusting the frequency
▷ Open the Tune menu item in the Advanced menu.
▷ Adjust the settings.
►
Setting the channel and frequency
▷ Select the menu item and call it up by holding down the SET button un-
til the channel selection appears.
►
Advanced -> Pilot Tone menu item
In the Pilot Tone menu item of the Advanced submenu, you can activate
and deactivate the pilot tone evaluation.
►
The pilot tone has an inaudible frequency that is sent from the transmitter
and evaluated by the receiver. It supports the receiver’s squelch function.
56
Page 58
Using the EK 100 G4
Advanced -> LCD Contrast menu item
In the LCD Contrast menu item of the Advanced submenu, you can adjust
the display contrast of the display panel in 16 steps.
►
Advanced -> Reset menu item
In the Reset menu item of the Advanced submenu, you can reset the set-
tings of the receiver.
When you reset the diversity receiver, only the selected settings of the pilot
tone and the U frequency bank are retained.
►
Advanced -> Software Revision menu item
In the Software Revision menu item of the Advanced submenu, you can
display the current software version of the receiver.
57
Page 59
Using the SKM 100 G4
Using the SKM 100 G4
These sections contain detailed information about using the SKM 100 G4
and SKM 100 G4-S.
You can find information on installation and startup of the SKM 100 G4 and
SKM 100 G4-S under “Installing the SKM 100 G4”.
Operating elements of the SKM 100 G4 handheld transmitter
►
1 Display panel
• See “Displays on the SKM 100 G4 handheld transmitter display panel”
2 Infra-red interface
• See “Synchronizing devices”
3 DOWN, UP and SET multi-function switch
• See “Buttons for navigating the SKM 100 G4 menu”
4 ON/OFF button with ESC function in the operating menu
• Switch the transmitter on or off
See “Switching the SKM 100 G4 handheld transmitter on and off”
• Escape function in the menu
See “Buttons for navigating the SKM 100 G4 menu”
58
Page 60
Using the SKM 100 G4
5 Colored ring
• Available in different colors (see “Additional accessories” and
“Changing the colored ring”)
• Can be turned to protect the multi-function switch
6 Operation and battery indicator, red LED
• illuminated = ON
See “Switching the SKM 100 G4 handheld transmitter on and off”
•flashing = LOW BATTERY
See “Inserting and removing the batteries/rechargeable batteries”
7 MIC button (only SKM 100 G4-S)
• See “Muting the handheld transmitter (AF mute)”
• See “Advanced > Mute Mode menu item (SKM 100 G4-S only)”
Switching the SKM 100 G4 handheld transmitter on and off
To switch on the SKM 100 G4:
▷ Hold down the ON/OFF button until the Sennheiser logo appears on the
display.
►
To switch off the SKM 100 G4:
▷ Hold down the ON/OFF button until the display goes off.
59
Page 61
Using the SKM 100 G4
Muting the handheld transmitter (AF mute)
SKM 100 G4
The audio signal of the transmitter cannot be muted.
However, when you deactivate the RF signal no AF signal is output. See
“Deactivating the RF signal (RF mute)”.
SKM 100 G4-S
You can mute the audio signal by pressing the MIC button.
•The MIC button lights up red: the audio signal is activated
•The MIC button is not lit: the audio signal is muted
60
Page 62
Using the SKM 100 G4
Deactivating the RF signal (RF mute)
You can temporarily deactivate the RF signal when the microphone is
switched on. When the RF signal is deactivated, no audio signal is output.
Use this function to save battery or when you want to prepare a microphone for use during live broadcast without interfering with the current
transmission path.
To deactivate the RF signal:
▷ Short-press the ON/OFF button.
RF Mute On? appears.
▷ Press the SET button.
The transmission frequency is displayed, however the wireless microphone is not transmitting an RF signal. The transmission icon is not lit
(see “Displays on the SKM 100 G4 handheld transmitter display panel”).
To activate the RF signal:
▷ Short-press the ON/OFF button.
RF Mute Off? appears.
▷ Press the SET button.
The transmission icon appears again (see “Displays on the SKM 100 G4
handheld transmitter display panel”).
►
61
Page 63
Using the SKM 100 G4
Lock-off function
You can set the automatic lock-off function in the Auto lock menu (see
“Buttons for navigating the SKM 100 G4 menu”).
When you have switched on the lock-off function, you will have to turn the
transmitter off and on again in order to operate it.
To temporarily deactivate the lock-off function:
▷ Press the SET button.
Locked appears in the display panel.
▷ Press the UP or DOWN button.
Unlock? appears in the display panel.
▷ Press the SET button.
Lock-off function is now temporarily deactivated.
►
62
Page 64
Using the SKM 100 G4
Displays on the SKM 100 G4 handheld transmitter display panel
You can view the following information on the transmitter display.
►
1 AF audio level
• Displays the audio level with peak hold function
• See “Sensitivity menu item”
2 Frequency
• Configured transmission frequency
• See “Frequency Preset menu item”
3 Name
• Freely selectable name of the receiver
• See “Name menu item”
4 Transmission icon
• RF signal is being transmitted
• See “Deactivating the RF signal (RF mute)”
5 Lock-off function
• Lock-off function is activated
• See “Auto Lock menu item”
6 Battery status
• See “Battery status”
7 MUTE muting function
• The audio signal is muted
• See “Muting the handheld transmitter (AF mute)”
• See “Deactivating the RF signal (RF mute)”
8 P pilot tone
• Pilot tone transmission is activated
• See “Advanced > Pilot Tone menu item”
>> “Buttons for navigating the SKM 100 G4 menu”
>> “Setting options in the menu”
63
Page 65
Using the SKM 100 G4
ew100 G4
MHz
548.100
MUTE
P
AF
MHz
548.100
B.Ch: 20.12
MUTE
P
AF
B.Ch: 20.12
MUTE
P
AF
ew100 G4
Select a standard display
▷ Move the multi-function switch to select a standard display:
Frequency/Name standard display
►
Channel/Frequency standard display
►
Name/Channel standard display
►
64
Page 66
Using the SKM 100 G4
Buttons for navigating the SKM 100 G4 menu
Navigating through the menu
To open the menu:
▷ Press the SET button.
The operating menu is shown on the transmitter display panel.
To open a menu item:
▷ Press the UP or DOWN buttons to navigate through the individual
menu items.
▷ Press the SET button to open the selected menu item.
“Operating elements of the SKM 100 G4 handheld transmitter”
Making changes in a menu item
After you open a menu item, you can make changes as follows:
▷ Press the UP or DOWN buttons to set the displayed value.
▷ Press the SET button to save the setting.
▷ Press the ESC (ON/OFF) button to leave the menu item without saving
the setting.
“Operating elements of the SKM 100 G4 handheld transmitter”
>> “Displays on the SKM 100 G4 handheld transmitter display panel”
>> “Setting options in the menu”
65
Page 67
Using the SKM 100 G4
Setting options in the menu
In the SKM 100 G4 menu, you can configure the following settings.
Adjusting the input sensitivity
▷ See “Sensitivity menu item”
Setting the frequency bank and the channel
▷ See “Frequency Preset menu item”
Entering a freely selectable name
▷ See “Name menu item”
Activating/deactivating the automatic lock-off function
▷ See “Auto Lock menu item”
Configuring enhanced settings in the Advanced Menu:
• Adjusting the transmission frequencies for the U frequency bank
• Defining the MIC button setting (SKM 100 G4-S only)
• Activating/deactivating the pilot tone evaluation
• Adjusting the contrast of the display panel
• Resetting the transmitter
• Displaying the current software revision
▷ See “Advanced menu item”
66
Page 68
Using the SKM 100 G4
Sensitivity menu item
• Adjusting the input sensitivity – AF audio level
►
Setting range: 0 dB to -48 dB in 6 dB steps.
The AF audio level is also displayed when the wireless microphone is muted, e.g. to check the sensitivity before a live broadcast.
Recommended presets:
• Loud music/vocals: -48 to -18 dB
• Moderation: -18 to -12 dB
• Interviews: -12 to 0 dB
67
Page 69
Using the SKM 100 G4
Frequency Preset menu item
• Manually selecting a frequency bank and channel
►
While you work in the Frequency Preset menu, the RF signal is deactivated.
Please note when creating multi-channel systems:
Only the factory-preset frequencies within one frequency bank are intermodulation-free. The wireless microphone and receiver must be set to the
same frequency. Be sure to note the information on frequency selection
under “Establishing a radio link”.
Name menu item
• Entering names
►
In the Name menu item you can enter any name you want for the wireless
microphone (e.g. the names of the musicians).
The name can be shown in the Frequency/Name and Name/Channel standard displays.
The names are a maximum of 8 characters:
• All letters except umlauts.
• Numbers from 0 to 9
• Special characters and spaces
Enter the names as follows:
▷ Move the multi-function switch to select a character.
▷ Press the multi-function switch to jump to the next space or to save the
name you have entered once it is complete.
68
Page 70
Using the SKM 100 G4
Auto Lock menu item
• Switching the automatic lock-off function on and off
►
This lock prevents the wireless microphone from being unintentionally
switched off and also prevents any unintentional changes to the transmitter’s configuration. In the current standard display, the lock icon shows
whether the lock-off function is currently switched on.
You can find information about using the lock-off function under “Lock-off
function”.
69
Page 71
Using the SKM 100 G4
Advanced menu item
In the Advanced submenu you can configure enhanced settings.
The following sub-items are available:
Adjusting the transmission frequencies for the U frequency bank
▷ See “Advanced > Tune menu item”
Defining the MIC button setting (SKM 100 G4-S only)
▷ See “Advanced > Mute Mode menu item (SKM 100 G4-S only)”
Activating/deactivating the pilot tone evaluation
▷ See “Advanced > Pilot Tone menu item”
Adjusting the contrast of the display panel
▷ See “Advanced > LCD Contrast menu item”
Resetting the transmitter
▷ See “Advanced > Reset menu item”
Displaying the current software revision
▷ See “Advanced > Software Revision menu item”
70
Page 72
Using the SKM 100 G4
Advanced > Tune menu item
• Configuring the transmission frequency and frequency bank U
When you have configured the wireless microphone to a system bank and
you call up the Tune menu item, channel 1 of the frequency bank U is automatically set. The message U.1 briefly appears in the display. In the factory
settings, the channels of the frequency bank U are not assigned to any
transmission frequency.
While you work in the Tune menu, the RF signal is deactivated.
You can configure a transmission frequency for the current channel or select a channel in the frequency bank U and configure a transmission frequency for this channel in the Tune menu. Be sure to note the information
on frequency selection, see “Setting notes”.
Only adjusting the frequency
To configure the transmission frequency for the current channel:
▷ Open the Tune menu item in the Advanced menu.
The frequency selection appears.
►
▷ Configure the desired frequency.
▷ Press the multi-function switch.
Your settings will be saved. You are now back in the operating menu.
Setting the channel and frequency
To select a channel and assign it a frequency:
▷ Move the multi-function switch until the Tune menu item appears.
▷ Hold down the multi-function switch until the frequency bank selection
appears.
►
▷ Set the desired channel.
▷ Press the multi-function switch.
The frequency selection appears.
▷ Configure the frequency.
71
Page 73
Using the SKM 100 G4
Advanced > Mute Mode menu item (SKM 100 G4-S only)
• Configuring the function of the MIC button
►
AF On/Off mode
• When you press the MIC button, no audio signal is transmitted.
Disabled mode
• No function
You can find information about the MIC button under “Muting the handheld
transmitter (AF mute)”.
Advanced > Pilot Tone menu item
• Activating/deactivating pilot tone transmission
►
The pilot tone has an inaudible frequency that is sent from the transmitter
and evaluated by the receiver. It supports the receiver’s squelch function.
Advanced > LCD Contrast menu item
• Adjusting the contrast of the display panel
You can configure the contrast of the display in 16 steps.
72
Page 74
Using the SKM 100 G4
Advanced > Reset menu item
• Resetting the wireless microphone
►
When you reset the wireless microphone, only the selected settings of the
pilot tone and the U frequency bank are retained.
Advanced > Software Revision menu item
• Show software revision
You can display the current software revision.
73
Page 75
Using the SK 100 G4
Using the SK 100 G4
These sections contain detailed information about using the SK 100 G4.
You can find information on installation and startup of the SK 100 G4 under
“Installing the SK 100 G4”.
Operating elements of the SK 100 G4 bodypack transmitter
►
1 Display panel
• See “Displays on the SK 100 G4 bodypack transmitter display panel”
2 Operation and battery indicator, red LED
• illuminated = ON
See “Switching the SK 100 G4 bodypack transmitter on and off”
•flashing = LOW BATTERY
See “Inserting and removing the batteries/rechargeable batteries”
3 Audio overload indicator, yellow LED
• illuminated = AF PEAK (overload)
See “Sensitivity menu item”
74
Page 76
Using the SK 100 G4
4 UP button
• See “Buttons for navigating the SK 100 G4 menu”
5 SET button
• See “Buttons for navigating the SK 100 G4 menu”
6 DOWN button
• See “Buttons for navigating the SK 100 G4 menu”
7 ON/OFF button with ESC function in the operating menu
• Switch the transmitter on or off
See “Switching the SK 100 G4 bodypack transmitter on and off”
• Escape function in the menu
See “Buttons for navigating the SK 100 G4 menu”
8 Infra-red interface
• See “Synchronizing devices”
9 MUTE switch
• Deactivate and activate audio signal
See “Muting the bodypack transmitter (AF mute)”
• Deactivate and activate RF signal
See “Deactivating the RF signal (RF mute)”
Switching the SK 100 G4 bodypack transmitter on and off
▷ Press the two catches and open the battery compartment cover.
To switch on the SK 100 G4:
▷ Hold down the ON/OFF button until the Sennheiser logo appears on the
display.
To switch off the SK 100 G4:
▷ Hold down the ON/OFF button until the display goes off.
75
Page 77
Using the SK 100 G4
Muting the bodypack transmitter (AF mute)
You can deactivate the audio signal with the MUTE switch.
To do this, the MUTE switch function must be configured to AF On/Off.
You can find more information about this subject under “Advanced > Mute
Mode menu item”.
►
▷ Slide the MUTE switch to the MUTE position.
The audio signal is muted. The message MUTE is shown on the display.
76
Page 78
Using the SK 100 G4
Deactivating the RF signal (RF mute)
You can deactivate the RF signal in two ways:
Deactivating the RF signal with the MUTE switch
You can deactivate the RF signal with the MUTE switch.
To do this, the MUTE switch function must be configured to RF On/Off.
You can find more information about this subject under “Advanced > Mute
Mode menu item”.
►
▷ Slide the MUTE switch to the MUTE position.
The RF signal is deactivated. The message MUTE is shown in the dis-
play and the transmission icon no longer appears.
77
Page 79
Using the SK 100 G4
Deactivating the RF signal with the ON/OFF button
You can deactivate the RF signal with the ON/OFF button.
To deactivate the RF signal:
▷ Short-press the ON/OFF button.
RF Mute On? appears.
▷ Press the SET button.
The RF signal is deactivated. The message MUTE is shown in the display and the transmission icon no longer appears.
To activate the RF signal:
▷ Short-press the ON/OFF button.
RF Mute Off? appears.
▷ Press the SET button.
The transmission icon appears again.
78
Page 80
Using the SK 100 G4
Lock-off function
You can set the automatic lock-off function in the Auto lock menu (see
“Buttons for navigating the SK 100 G4 menu”).
When you have switched on the lock-off function, you will have to turn the
transmitter off and on again in order to operate it.
To temporarily deactivate the lock-off function:
▷ Press the SET button.
Locked appears in the display panel.
▷ Press the UP or DOWN button.
Unlock? appears in the display panel.
▷ Press the SET button.
Lock-off function is now temporarily deactivated.
►
79
Page 81
Using the SK 100 G4
Displays on the SK 100 G4 bodypack transmitter display panel
You can view the following information on the transmitter display.
►
1 AF audio level
• Displays the audio level with peak hold function
• See “Sensitivity menu item”
2 Frequency
• Configured transmission frequency
• See “Frequency Preset menu item”
3 Name
• Freely selectable name of the receiver
• See “Name menu item”
4 Transmission icon
• RF signal is being transmitted
• See “Deactivating the RF signal (RF mute)”
5 Lock-off function
• Lock-off function is activated
• See “Auto Lock menu item”
6 Battery status
• See “Battery status”
7 MUTE muting function
• The audio signal is muted
• See “Muting the bodypack transmitter (AF mute)”
• See “Deactivating the RF signal (RF mute)”
8 P pilot tone
• Pilot tone transmission is activated
• See “Advanced > Pilot Tone menu item”
>> “Buttons for navigating the SK 100 G4 menu”
>> “Setting options in the menu”
80
Page 82
Using the SK 100 G4
ew100 G4
MHz
548.100
MUTE
P
AF
MHz
548.100
B.Ch: 20.12
MUTE
P
AF
B.Ch: 20.12
MUTE
P
AF
ew100 G4
Select a standard display
▷ Press the UP or DOWN buttons to select a standard display.
Frequency/Name standard display
►
Channel/Frequency standard display
►
Name/Channel standard display
►
81
Page 83
Using the SK 100 G4
Buttons for navigating the SK 100 G4 menu
Navigating through the menu
To open the menu:
▷ Press the SET button.
The operating menu is shown on the transmitter display panel.
To open a menu item:
▷ Press the UP or DOWN buttons to navigate through the individual
menu items.
▷ Press the SET button to open the selected menu item.
“Operating elements of the SK 100 G4 bodypack transmitter”
Making changes in a menu item
After you open a menu item, you can make changes as follows:
▷ Press the UP or DOWN buttons to set the displayed value.
▷ Press the SET button to save the setting.
▷ Press the ESC (ON/OFF) button to leave the menu item without saving
the setting.
“Operating elements of the SK 100 G4 bodypack transmitter”
>> “Displays on the SK 100 G4 bodypack transmitter display panel”
>> “Setting options in the menu”
82
Page 84
Using the SK 100 G4
Setting options in the menu
In the SK 100 G4 menu, you can configure the following settings.
Adjusting the input sensitivity
▷ See “Sensitivity menu item”
Setting the frequency bank and the channel
▷ See “Frequency Preset menu item”
Entering a freely selectable name
▷ See “Name menu item”
Activating/deactivating the automatic lock-off function
▷ See “Auto Lock menu item”
Configuring enhanced settings in the Advanced Menu:
• Adjusting the transmission frequencies for the U frequency bank
• Configuring the MUTE switch
• Configuring the guitar cable emulation
• Activating/deactivating the pilot tone evaluation
• Adjusting the contrast of the display panel
• Resetting the transmitter
• Displaying the current software revision
▷ See “Advanced menu item”
83
Page 85
Using the SK 100 G4
Sensitivity menu item
• Adjusting the input sensitivity – AF audio level
►
Setting range: 0 dB to –60 dB in 6 dB steps.
The AF audio level is also displayed when the bodypack transmitter is muted, e.g. to check the sensitivity before a live broadcast.
Recommended presets:
• Loud music/vocals: –30 to –21 dB
• Moderation: -21 to 0 dB
• Electric guitar with single-coil pickups: –30 to -24 dB
• Electric guitar with Humbucker pickups: -45 to -30 dB
• Electric guitars with active electronics: -45 to -30 dB
Frequency Preset menu item
• Manually selecting a frequency bank and channel
►
While you work in the Frequency Preset menu, the RF signal is deactivated.
Please note when creating multi-channel systems:
Only the factory-preset frequencies within one frequency bank are intermodulation-free. The bodypack transmitter and receiver must be set to the
same frequency. Be sure to note the information on frequency selection
under “Establishing a radio link”.
84
Page 86
Using the SK 100 G4
Name menu item
• Entering names
►
In the Name menu item you can enter any name you want for the bodypack
transmitters (e.g. the names of the musicians).
The name can be shown in the Frequency/Name and Name/Channel standard displays.
The names are a maximum of 8 characters:
• All letters except umlauts.
• Numbers from 0 to 9
• Special characters and spaces
Enter the names as follows:
▷ Press the UP or DOWN buttons to select a character.
▷ Press the SET button to switch to the next space or to save the name
you have entered once it is complete.
Auto Lock menu item
• Switching the automatic lock-off function on and off
►
This lock prevents the wireless microphone from being unintentionally
switched off and also prevents any unintentional changes to the transmitter’s configuration. In the current standard display, the lock icon shows
whether the lock-off function is currently switched on.
You can find information about using the lock-off function under “Lock-off
function”.
85
Page 87
Using the SK 100 G4
Advanced menu item
In the Advanced submenu you can configure enhanced settings.
The following sub-items are available:
Adjusting the transmission frequencies for the U frequency bank
▷ See “Advanced > Tune menu item”
Configuring the MUTE switch
▷ See “Advanced > Mute Mode menu item”
Configuring the guitar cable emulation
▷ See “Advanced > Cable Emulation menu item”
Activating/deactivating the pilot tone evaluation
▷ See “Advanced > Pilot Tone menu item”
Adjusting the contrast of the display panel
▷ See “Advanced > LCD Contrast menu item”
Resetting the transmitter
▷ See “Advanced > Reset menu item”
Displaying the current software revision
▷ See “Advanced > Software Revision menu item”
86
Page 88
Using the SK 100 G4
Advanced > Tune menu item
• Configuring the transmission frequency and frequency bank U
When you have configured the bodypack transmitter to a system bank and
you call up the Tune menu item, channel 1 of the frequency bank U is automatically set. The message U.1 briefly appears in the display. In the factory
settings, the channels of the frequency bank U are not assigned to any
transmission frequency.
While you work in the Tune menu, the RF signal is deactivated.
You can configure a transmission frequency for the current channel or select a channel in the frequency bank U and configure a transmission frequency for this channel in the Tune menu. Be sure to note the information
on frequency selection, see “Setting notes”.
Only adjusting the frequency
To configure the transmission frequency for the current channel:
▷ Open the Tune menu item in the Advanced menu.
The frequency selection appears.
►
▷ Configure the desired frequency.
▷ Press the SET button.
Your settings will be saved. You are now back in the operating menu.
Setting the channel and frequency
To select a channel and assign it a frequency:
▷ Open the Tune menu item in the Advanced menu by pressing and hold-
ing the SET button until the frequency bank selection appears.
►
▷ Set the desired channel.
▷ Press the SET button.
The frequency selection appears.
▷ Configure the frequency.
87
Page 89
Advanced > Mute Mode menu item
•Configuring the MUTE switch
►
AF On/Off mode
• If set to position MUTE, the audio signal is muted.
RF On/Off mode
• If set to position MUTE, the RF signal is deactivated.
Disabled mode
Using the SK 100 G4
• No function
You can find information about operating the mute switch under “Muting
the bodypack transmitter (AF mute)” and “Deactivating the RF signal (RF
mute)”.
Advanced > Cable Emulation menu item
• Emulating a guitar cable
►
Using this menu item you can emulate the capacitances of your guitar cables and influence the sound of your guitar.
88
Page 90
Using the SK 100 G4
Advanced > Pilot Tone menu item
• Activating/deactivating pilot tone transmission
►
The pilot tone has an inaudible frequency that is sent from the transmitter
and evaluated by the receiver. It supports the receiver’s squelch function.
Advanced > LCD Contrast menu item
• Adjusting the contrast of the display panel
You can configure the contrast of the display in 16 steps.
Advanced > Reset menu item
• Resetting the bodypack transmitter
►
When you reset the bodypack transmitter, only the selected settings of the
pilot tone and the U frequency bank are retained.
Advanced > Software Revision menu item
• Show software revision
You can display the current software revision.
89
Page 91
Using the SKP 100 G4
Using the SKP 100 G4
These sections contain detailed information about using the SKP 100 G4.
You can find information on installation and startup of the SKP 100 G4 under “Installing the SKP 100 G4”.
Operating elements of the SKP 100 G4 plug-on transmitter
►
1 Display panel
• See “Displays on the SKP 100 G4 plug-on transmitter display panel”
2 UP button
• See “Buttons for navigating the SKP 100 G4 menu”
3 Operation and battery indicator, red LED
• illuminated = ON
See “Switching the SKP 100 G4 plug-on transmitter on and off”
•flashing = LOW BATTERY
See “Inserting and removing the batteries/rechargeable batteries”
4 ON/OFF button with ESC function in the operating menu
• Switch the transmitter on or off
See “Switching the SKP 100 G4 plug-on transmitter on and off”
• Escape function in the menu
See “Buttons for navigating the SKP 100 G4 menu”
5 DOWN button
• See “Buttons for navigating the SKP 100 G4 menu”
6 MUTE switch
• See “Muting the plug-on transmitter (AF mute)”
7 SET button
• See “Buttons for navigating the SKP 100 G4 menu”
8 Infra-red interface
• See “Synchronizing devices”
90
Page 92
Using the SKP 100 G4
Switching the SKP 100 G4 plug-on transmitter on and off
To switch on the SKP 100 G4:
▷ Hold down the ON/OFF button until the Sennheiser logo appears on the
display.
To switch off the SKP 100 G4:
▷ Hold down the ON/OFF button until the display goes off.
91
Page 93
Using the SKP 100 G4
Muting the plug-on transmitter (AF mute)
You can mute the audio signal with the MUTE switch.
To do this, the MUTE switch function must be configured to AF On/Off.
You can find more information about this subject under “Advanced > Mute
Mode menu item”.
▷ Slide the MUTE switch to the MUTE position.
The audio signal is muted. The message MUTE is shown on the display.
92
Page 94
Using the SKP 100 G4
Deactivating the RF signal (RF mute)
You can deactivate the RF signal in two ways:
Deactivating the RF signal with the MUTE switch
You can deactivate the RF signal with the MUTE switch.
To do thi s, the MUTE sw itch f uncti on must be con figur ed to RF On/Off. You
can find more information about this subject under “Advanced > Mute
Mode menu item”.
Slide the MUTE switch to the MUTE position.
The RF signal is deactivated. The message MUTE is shown in the display
and the transmission icon no longer appears.
93
Page 95
Using the SKP 100 G4
Deactivating the RF signal with the ON/OFF button
You can deactivate the RF signal with the ON/OFF button.
To deactivate the RF signal:
▷ Short-press the ON/OFF button.
RF Mute On? appears.
▷ Press the SET button.
The RF signal is deactivated. The message MUTE is shown in the dis-
play and the transmission icon no longer appears.
To activate the RF signal:
▷ Short-press the ON/OFF button.
RF Mute Off? appears.
▷ Press the SET button.
The transmission icon appears again.
94
Page 96
Using the SKP 100 G4
Lock-off function
You can set the automatic lock-off function in the Auto lock menu (see
“Auto Lock menu item”).
When you have switched on the lock-off function, you will have to turn the
transmitter off and on again in order to operate it.
To temporarily deactivate the lock-off function:
▷ Press the SET button.
Locked appears in the display panel.
▷ Press the UP or DOWN button.
Unlock? appears in the display panel.
▷ Press the SET button.
Lock-off function is now temporarily deactivated.
When you are in the operating menu
>> Lock-off function is deactivated long enough for you to work in the operating menu.
When one of the standard displays is shown
>> Lock-off function is automatically activated after 10 seconds.
The lock-off function icon flashes while the lock-off function is being activated again.
95
Page 97
Using the SKP 100 G4
Displays on the SKP 100 G4 plug-on transmitter display panel
You can view the following information on the transmitter display.
►
1 AF audio level
• Displays the audio level with peak hold function
• See “Sensitivity menu item”
2 Frequency
• Configured transmission frequency
• See “Frequency Preset menu item”
3 Name
• Freely selectable name of the receiver
• See “Name menu item”
4 Transmission icon
• RF signal is being transmitted
• See “Deactivating the RF signal (RF mute)”
5 Lock-off function
• Lock-off function is activated
• See “Auto Lock menu item”
6 Battery status
• See “Inserting and removing the batteries/rechargeable batteries”
7 MUTE muting function
• The audio signal is muted
• See “Muting the plug-on transmitter (AF mute)”
8 P pilot tone
• Pilot tone transmission is activated
• See “Advanced > Pilot Tone menu item”
>> “Buttons for navigating the SKP 100 G4 menu”
>> “Setting options in the menu”
96
Page 98
Using the SKP 100 G4
ew100 G4
MHz
548.100
MUTE
P
AF
MHz
548.100
B.Ch: 20.12
MUTE
P
AF
B.Ch: 20.12
MUTE
P
AF
ew100 G4
Select a standard display
▷ Press the UP or DOWN buttons to select a standard display.
Frequency/Name standard display
►
Channel/Frequency standard display
►
Name/Channel standard display
►
97
Page 99
Using the SKP 100 G4
Buttons for navigating the SKP 100 G4 menu
Navigating through the menu
To open the menu:
▷ Press the SET button.
The operating menu is shown on the transmitter display panel.
To open a menu item:
▷ Press the UP or DOWN buttons to navigate through the individual
menu items.
▷ Press the SET button to open the selected menu item.
“Operating elements of the SKP 100 G4 plug-on transmitter”
Making changes in a menu item
After you open a menu item, you can make changes as follows:
▷ Press the UP or DOWN buttons to set the displayed value.
▷ Press the SET button to save the setting.
▷ Press the ESC (ON/OFF) button to leave the menu item without saving
the setting.
“Operating elements of the SKP 100 G4 plug-on transmitter”
>> “Displays on the SKP 100 G4 plug-on transmitter display panel”
>> “Setting options in the menu”
98
Page 100
Using the SKP 100 G4
Setting options in the menu
In the SKP 100 G4 menu, you can configure the following settings.
Adjusting the input sensitivity
▷ See “Sensitivity menu item”
Setting the frequency bank and the channel
▷ See “Frequency Preset menu item”
Entering a freely selectable name
▷ See “Name menu item”
Activating/deactivating the automatic lock-off function
▷ See “Auto Lock menu item”
Configuring enhanced settings in the Advanced Menu:
• Adjusting the transmission frequencies for the U frequency bank
• Configuring the MUTE switch
• Configuring the guitar cable emulation
• Activating/deactivating the pilot tone evaluation
• Adjusting the contrast of the display panel
• Resetting the transmitter
• Displaying the current software revision
▷ See “Advanced menu item”
99
Loading...