Sennheiser EM 6000 Specifications
PRODUCT SPECIFICATION
Digital 6000
EM 6000 | EM 6000 DANTE
True bit diversity receiver
1/6
FEATURES
• Extremely efficient digital 2-channel receiver with an
intuitive, easily configurable user interface and integrated antenna splitter
• Reliable RF performance with equidistant frequency
grid and superior audio quality with Long Range mode
and proprietary audio codec (SeDAC) from the masterpiece Digital 9000
• Future proof and usable worldwide due to large switching bandwidth, digital and analog interfaces and
AES-256 encryption
No compromises, on any stage: With its large 244 MHz switching bandwidth, the EM 6000 2-channel digital receiver
can find reliable transmission paths in absolutely any environment. Its renowned LR mode (shared with the masterpiece
Digital 9000) ensures superior quality audio signals, even in the most demanding high frequency scenarios. Error correction and audio error masking recognize and fix problems long before they even become audible. This guarantees a reliable
connection where other systems fail.
Through its equidistant frequency grid, Digital 6000 assures the simplest frequency configuration and excellent spectral
efficiency. Thanks to the high intermodulation resistance, more channels can now be set up than ever before. Up to eight
receivers can be cascaded directly from only one pair of antennas.
Maximum overview, quick setup, shortcuts to important functions: The concept for the new user interface on contrast-rich, white OLED displays comes from practical experience. All vital parameters are summarized at a glance.
Important functions can be reached directly via home screens, without lengthy navigation paths. The auto-setup enables
scanning and frequency distribution to all connected devices directly via the receiver. Of course, the Digital 6000 can also
be monitored and configured via Wireless Systems Manager (WSM) software.
Digital 6000 seamlessly integrates with existing digital or analog infrastructures. The EM 6000 receiver has a digital AES
output with word clock in and outputs, high-quality, transformer balanced analog XLR and 6.3 mm TRS jack outputs as
well as a 6.3 mm headphone output. The Dante Version with an Audinate Brooklyn II card offers two additional Amphenol
RJ-45 connectors for integrating the receiver into a Dante network.
The EM 6000 is compatible with all Sennheiser UHF antennas.
DELIVERY INCLUDES
• EM 6000 or EM 6000 DANTE receiver
• mains cable (EU, UK or US plug)
• 2 antennas
• 2 BNC antenna cables (50 Ω) for daisy-chaining
• quick guide
• safety guide
• booklet with specifications and manufacturer
declarations
SPECIFICATIONS
PRODUCT SPECIFICATION
Digital 6000
EM 6000 | EM 6000 DANTE
True bit diversity receiver
2/6
Frequency range 470 to 714 MHz
Transmission scheme Digital modulation
Long Range Mode
Min. frequency spacing for
equidistant grid: 325 kHz
Audio codec SeDAC (Sennheiser Digital
Audio Codec)
Dynamic range 111 dB (A) typ.
Encryption AES 256
Latency Analog audio out: 3 ms
Digital audio out: 3 ms
(AES/EBU)
Total harmonic distortion
(THD)
Temperature Operation: −10 °C to +50 °C
Relative air humidity Operation:
Dripping and splashing
liquids
Receiving channels 2
Receiver principle Double superheterodyne
Diversity True Bit Diversity
Sensitivity −100 dBm typical
Image rejection > 100 dB typical
Blocking > 80 dB typical
Audio frequency response 30 Hz to 20 kHz (1.5 dB)
Analog audio outputs XLR-3 and 6.3 mm jack
< 0.03 % (at 1 kHz)
Storage: −25 °C to +70 °C
max. 85 % at 40 °C
(non-condensing)
Storage:
max. 90 % at 40 °C
(non-condensing)
The product must not be
exposed to dripping and
splashing (IP2X)
per channel (transformer
balanced),
−10 dBu to +18 dBu in steps
of 1 dB (2 kΩ)
Digital audio outputs AES3-2003, XLR-3:
48 kHz, 96 kHz, 24 bit
Dante™, RJ-45
(only EM 6000 DANTE):
48 kHz, 96 kHz, 24 bit
Can be externally synchronized using WCLK loop-through with BNC sockets
Headphone output 6.3 mm jack,
2 × 100 mW at 32 Ω
Antenna inputs 2 × BNC (50 Ω)
Daisy chain outputs 2 × BNC (50 Ω)
0 dB +/− 0.5 dB amplifi-
cation relative to antenna
inputs
Daisy-chained receivers
(RF)
Booster supply voltage 12 V DC, max. 200 mA each
Word clock input BNC, 75 Ω
Word clock output BNC, 75 Ω
Word clock sampling rates 48 kHz, 96 kHz
Network IEEE 802.3-2002
Dante™
(only EM 6000 DANTE)
Power supply 100 to 240 V AC, 50/60 Hz
Power consumption Max. 35 W
Power plug 3-pin, protection class I as
Dimensions (H × W × D
with mounting elements)
Weight Approx. 5.2 kg
Max. 8 EM 6000 units
via antenna sockets, short
circuit proof
(10/100 Mbit/s), shielded
RJ-45 connection
IEEE 802.3 (1000 Mbit/s),
2 × shielded RJ-45 connec-
tion
per IEC/EN 60320-1
44 × 483 × 373 mm
Loading...