Sennheiser EM 1005-90 User Manual
Specifications and Main Features
- Model: EM 1005-90
- Type: Compact RF receiver
- Operating frequencies: 135 - 250 MHz
- Receiver threshold: < 0.5 μV
- Output power level: +12 dBm for rated / +18 dBm for peak swing
- Output voltage: 3 mV - 3 V, adjustable
- Air output connector: XLR, symmetric, adjustable level; nominal load: 600 Ohm
- Head phone output connector: 6.3 mm, symmetric jack; nominal load: 50 Ohm
- AF-frequency Bandwidth: 20 Hz - 20 kHz
- Total Harmonic Distortion: <= 1 % at swing (1 kHz) rated
- S:N ratio: > 52 dBA
- Squench: adjustable 0 to 100 μV
- Supply voltage: 90 - 135 V / 200 - 240 V AC 50 - 60 Hz or 11 to 18 V DC
- Current Draw: Approx. 140 mA
- Size: 168 x 120 x 50 mm
- Weight: Approx. 1020 g
- Provided with: 1 EM 1005-90 Receiver , 1 GZA 1001 Telescopic Antenna
- Specifications: “HiDyn” Compander, Modulation Display, Operation in AC mains or battery, electronic squelch adjustable.
Frequently Asked Questions
Q1: What frequency range does the EM 1005-90 work with?
A1: The working frequency of the EM 1005-90 is the range from 135 to 250 MHz.
Q2: How much power is the device required to be supplied with?
A2: The power required by the device ranges from 90 - 135 Volts or it ranges from 200 to 240 Volts with an AC frequency of 50 - 60 Hz including 11 - 18 Volts DC .
Q3: How can the output voltage on the af output jacks be modified?
A3: The output voltage across the AF jacks can be set between the values of 3 volts and 3 mili volts.
Q4: Are stereo headphones compatible with the em 1005-90?
A4: The headphone output allows for a 6.3 mm jack connection to mono/stereo headphones with adjustable volume for audio output which makes the em 1005-90 compatible with headphones.
Q5: In the case of em 1005-90, What is the value of the highest current rating?
A5: The rated maximum consumption value roughly amounts up to 140 mA.
Q6: Is there a function inbuilt into the device that can modify the squelch?
A6: The EM 1005-90 has an electronic adjustable squelch which ranges from 0 to 100 μV thus its possible to adjust the squelch of the device.
Q7: What will the measurement of the em 1005-90 be?
A7: The EM 1005-90 will be measured at 168 mm in width, 120 mm in height and 50 mm in depth.
Q8: What will be the components purchased in the em 1005-90 kit?
A8: There is one GZA 1001 telescopic antenna and em 1005-90 receiver purchased with the em 1005-90 kit.
User Manual
Loading...