Page 1
Bedienungsanleitung
Instructions for use
Notice d‘emploi
Istruzioni per l‘uso
Instrucciones para el uso
Gebruiksaanwijzing
845
845 S
Page 2
845 / 845 S
The 845 is a high-performance lead vocal microphone,
specially designed for rough stage use. Due to its
extended high-frequency response and super-cardioid
pick-up pattern, the
through high on-stage sound levels.
The microphone has a smooth, warm tonal response and
full dynamic range. The presence boost ensures vocal
clarity and projection.
The balanced frequency response maintains signal
quality when moving on and off axis during performance.
The minimal proximity effect provides for consistently
clear bass-end performance when singing closer to, or
further from the microphone, providing greater on-stage
freedom.
The super-cardioid pick-up pattern provides e
feedback rejection
internal damping isolates handling noise.
The 845 S variant features a silent
845 ensures vocal projection
xcellent
. The rugged metal construction and
ON/OFF switch
.
1
Page 3
Features
y Rugged all metal body
y Full dynamic range and smooth frequency response
for excellent signal quality
y Excellent feedback rejection
y Very good suppression of handling noise
y Humbucking coil
Delivery includes
y 845 microphone
y MZQ 800 microphone clamp
y Pouch
y Instructions for use
y Warranty Certificate
ON/OFF switch ( 845 S only)
Use the screw to lock the switch in the ON position. With
the switch set in the ON position, gently turn the screw
head 90° to lock the switch in position.
2
Page 4
Pin assignment of XLR-3 connector
symmetrisch
+
+
12
3
+
1
2
3
+
12
3
XLR
1
XLR
+
2
3
XLR
+
2
1
3
XLR 6,3 mm
Removing the sound inlet basket
XLR
+
6,3 mm
+
balanced
3
Page 5
Positioning the microphone
Position Resulting sound Commentary
High proximity effect
(much bass/
fundamental)
Powerful, direct sound
Very little crosstalk
from other sound
sources
Less proximity effect
(less bass/fundamental)
Some room ambience,
natural, balanced sound
Very little proximity
effect (little bass/
fundamental)
More room ambience,
indirect sound
More crosstalk from
other sound sources
Much crosstalk from
other sound sources
If sibilance or “popping” occurs, position the microphone
not directly in front of the mouth but slightly to the side.
In order to prevent feedback, position monitor loudspeakers so that they are located in the angle area of the
highest cancellation of the microphone.
In order to prevent interference due to crosstalk between
adjacent sound sources, try to position the microphone so
that the interfering sound source is located in the angle
area of the highest cancellation of the microphone
(approx. 120°; see polar diagram).
4
Page 6
Polar diagram
5
0
5
0
5
dB
30
60
90
30
60
90
0
50
80
50
0
000
z
000
z
8000
z
6000
z
z
z
z
000
z
50
60
0
80
90
0
00
00
000
000
0000
0000
m
0
v
1
1
2
2
12
1
125 H
250 H
H
1
H
Frequency response curve
B
- 4
-
-
- 7
-
2
2
1
1
12
1
1
2
H
4
H
H
1
H
2
1
2
1
5
Page 7
Specifications
Transducer principle dynamic
Frequency response 40.....16,000 Hz
Pick-up pattern super-cardioid
Sensitivity
(free field, no load at 1 kHz) 1.8 mV/Pa
Nominal impedance 350 Ω
Min. terminating impedance 1 kΩ
Connector XLR-3
Weight 330 g
Dimensions Ø 46 x L 185 mm
6
Page 8
Overview of microphone applications
Vari ant
e602-II
e604
e606
e608
e614
e815
e825
e835
Application
Vocals x x x x x x
Choirs x
Studio,
acoustic instruments
Orchestra x
Brass / Saxophone x x x
Acoustic guitar x
Acoustic bass x
Guitar amplifiers x
Bass amplifiers x
Leslie x x x
Piano, grand piano x
Kick drums x
Snare drums x x x
Rack toms x x x
Floor toms x x x
Congas x x x
Cymbals x
Percussion x x x x
Overheads x
x
e840
e845
e865
7
Page 9
Manufacturer declarations
Waaranty
2 years
Approval
Sennheiser electronic GmbH & Co. KG declare that this device
is in compliance with the applicable CE standards and regulations.
WEEE Declaration
Please dispose of this product at the end of its operational lifetime by bringing it to your local collection point or recycling
centre for such equipment.
8
Page 10
Sennheiser electronic GmbH & Co. KG
30900 Wedemark, Germany
Phone +49 (5130) 600 0
Fax +49 (5130) 600 300
www.sennheiser.com
Printed in Germany Publ. 03/07 511656/A04
Loading...