Sennheiser E 845 User Manual

Features—Benets

• Metal construction—rugged and reliable

• Full dynamic range and smooth frequency response—excellent signal quality

• Shock-mounted capsule—low sensitivity to impact and handling noise

• Hum compensating coil—reduces electrical interference

• Silent on/off switch (e 845-S only)

• Neodynum ferrous magnet with boron—keeps mic stable regardless of climate

• Falcon ring—consistent sound over time

• On/off switch (reed switch) can be locked in the ‘on’ position if required

Technical Data

dioidrac-repus nrettap pu-kciP

zH 000,61–04esnopser ycneuqerF

Sensitivity (free eld, no load) (1 kHz) 1.8 mV/Pa at 1 kHz, nominal

053 ecnadepmi lanimoN Ω

Min. terminating impedance 1 k

L 82.7 x W 18.1 sehcni ni snoisnemiD

zo 46.11 thgieW

Product Variants

e 845, e 845, EPACK845 (e 845, Stand, Cable), THREEPACK 845 (3x 845), e 845-S (with on/off
switch)

e 845 High Performance Lead Vocal Microphone

The e 845 is a high-performance super-cardioid lead vocal microphone with an extended
high-frequency response, specially designed for stage use. Sound inlet basket: rened steel.

Architect’s Specications

The unit shall be a super-cardioid vocal microphone with a hum compensating coil with a
frequency response of 40 Hz–16 kHz The unit shall have a sensitivity (free eld, no load) of
mV/Pa at 1 kHz and have nominal impedance of 350 Ω. The min. terminating impedance shall
be1 k. The unit shall be dimensions 1.81 x 7.28 inches, and weight 11.64 oz. The unit shall be a
sennheiser e845 microphone.

Supplied Accessories

1 protective pouch

1 MZQ 800 microphone clip

Optional Accessories

21' XLR microphone cable MC21N

2304 WZMneercsdniw maof yerG

Floor stand with boom arm SEMS 3000

e 845

e 845