Sennheiser e 835-S, e 835-S-PTT, e 835 Datasheet
PRODUCT SPECIFICATION
evolution wired
e 835 | e 835-S
1/2
FEATURES
• Rugged metal body
• Excellent feedback rejection
• High sound pressure handling capability
• Shock-mounted capsule provides excellent suppression
of handling noise
• Uniform on- and off-axis response
• Cardioid pick-up pattern provides isolation from other
on-stage signals
• Hum compensating coil
SPECIFICATIONS
The e 835 is a cardioid lead vocal stage microphone specially designed to perform under pressure. Its balanced
frequency response maintains signal quality when moving
on and off axis during performance.
The gentle presence boost ensures vocal clarity and projection. The minimal proximity effect provides for consistently clear bass-end performance when singing closer
to, or further from the microphone. The cardioid pick-up
pattern provides excellent feedback rejection, enablingthe
microphone to handle higher sound pressure levels. The
rugged metal construction and internal damping isolates
handling noise. The e 835-S variant features a silent ON/
OFF switch.
Transducer principle dynamic
Frequency response 40 - 16,000 Hz
Pick-up pattern cardioid
Sensitivity (free field, at
1 kHz)
Nominal impedance (at
1 kHz)
Min. terminating impedance 1 kΩ
Connector XLR-3
Temperature range 0 °C to +40 °C
Dimensions ⌀ 48 x 180 mm
Weight 330 g
2.7 mV/Pa
350 Ω
PRODUCT VARIANTS
e 835 Art. no. 004513
e 835-S Art. no. 004514
DELIVERY INCLUDES
• e 835 or e 835-S
• pouch
• MZQ 800 microphone clamp
• quick guide
• safety guide
ACCESSORIES
MZQ 800 Microphone clamp Art. no. 576183
MZW 4032-A Foam windshield, an-
thracite
MZW 4032-C Foam windshield, blue Art. no. 002980
Art. no. 002978
DIMENSIONS
1,000
2,000
5,000
10,000
20,000
49,2
1.94"
PRODUCT SPECIFICATION
evolution wired
e 835 | e 835-S
25,08
0.99"
2/2
27,28
1.07"
180,5
7.11"
POLAR PATTERN FREQUENCY RESPONSE
dBV
-40
-50
-60
-70
-80
-90
50
0°, 1 m
100
200
500
90°
60°
120°
150°
30°
180°
0°
0°
0
5
10
15
20
25
dB
180°
30°
150°
60°
120°
90°
125 Hz
250 Hz
500 Hz
1,000 Hz
2,000 Hz
4,000 Hz
8,000 Hz
16,000 Hz
63,34
2.49"
Hz
ARCHITECT‘S SPECIFICATION
The microphone shall be a dynamic cardioid type designed for lead vocal stage use. It shall have a rugged metal body and
a shock-mounted capsule and shall include a hum compensating coil.
The frequency response shall be 40 Hz – 16,000 Hz and the sensitivity (free field, no load) shall be 2.7 mV/Pa at 1 kHz. The
nominal impedance shall be 350 Ω, with a min. terminating impedance of 1 kΩ. The microphone shall provide a 3-pin XLR
connector. Dimensions shall be 48 x 180 mm (1.89" x 7.09"). Weight without cable shall be 330 grams (11.64 oz).
The microphone shall be the Sennheiser e 835, the variant with a silent ON/OFF switch shall be the Sennheiser e 835-S.
Sennheiser electronic GmbH & Co. KG · Am Labor 1 · 30900 Wedemark · Germany · www.sennheiser.com
Loading...