Sennheiser E835-SOLO-K Datasheet

e 835 Lead vocal stage mic, designed to perform under pressure

FEATURES



Rugged metal body



Excellent feedback rejection



High sound pressure handling capability



Shock-mounted capsule provides excellent suppression of handling noise



Uniform on- and off-axis response



Cardioid pick-up pattern provides isolation from other on-stage signals



Hum compensating coil

ARCHITECT’S SPECIFICATIONS

The microphone shall be a dynamic cardioid type designed for lead vocal stage use. It shall have a rugged metal body and a shock-mounted capsule and shall include a hum compensating coil. The frequency response shall be 40 Hz – 16,000 Hz and the sensitivity (free ﬁeld, no load) shall be 2.7 mV/Pa at 1 kHz. The nominal impedance shall be 350 O, with a min. terminating impedance of 1 kO. The microphone shall provide a 3-pin XLR connector. Dimensions shall be 48 x 180 mm (1.89“ x 7.09“). Weight without cable shall be 330 grams (11.64 oz). The microphone shall be the Sennheiser e 835, the variant with a silent ON/OFF switch shall be the Sennheiser e 835 S.

The e 835 is a cardioid lead vocal stage microphone specially designed to

perform under pressure. Its balanced frequency response maintains signal quality when moving on and off axis during performance. The gentle presence boost ensures vocal clarity and projection. The minimal proximity effect provides for consistently clear bass-end performance when singing closer to, or further from the microphone. The cardioid pick-up pattern provides excellent feedback rejection, enabling the microphone to handle higher sound pressure levels. The rugged metal construction and internal damping isolates handling noise. The e 835 S variant features a silent ON/OFF switch.

TECHNICAL DATA

Transducer principle (Microphone) .....................dynamic

Pick-up pattern ........................................................cardioid

Frequency response (microphone) .....................40 –16,000 Hz

Sensitivity (free ﬁeld, no load at 1 kHz) ...........2.7 mV/Pa

Nominal impedance ................................................350 O

Min. terminating impedance ................................1000 O

Connector ..................................................................XLR-3

Dimensions ...............................................................d 48 x 180 mm

Weight w/o cable ....................................................330 g

DELIVERY INCLUDES 1 e 835 1 microphone clip 1 pouch Instructions for use

e 835 Lead vocal stage mic, designed to perform under pressure

Contact your local Service Partner:

DIMENSIONS POLAR PATTERN

FREQUENCY RESPONSE

PRODUCT VARIANTS

e 835 S – cardioid lead vocal stage

microphone with noiseless on/off switch Cat. No. 004514

RECOMMENDED ACCESSORIES

MZQ 800 universal stand adapter clip for most Evolution

handheld wired microphones Cat. No. 004711

MZW 4032-A anthracite foam windscreen Cat. No. 002978 MZW 4032-C blue foam windscreen Cat. No. 002980

Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com