Thank you for purchasing this Digital Photo Frame.
1.Safety
1.1 Intended use
1.2 General safety instruction
2. Preparation for use
2.1 Unpacking
Before using the unit, please read this manual thoroughly, and retain it for
future reference. This manual will help you use many of the useful features that
will make using your Digital Photo Frame viewing more enjoyable.
The digital photo album display photos.
Due to the great variety of products with external memory connection
(USB,SD/MMC,etc.)andtheirsometimesquitemanufacturer-specific
functions we can neither guarantee that all devices will be recognized, nor that
all operating options that are possible in theory will actually work.
WARNING
Do not force on the appliance. It will damage the appliance.
CAUTION
Do not spill any liquid on the appliance.
Unpack the appliance carefully.
Check the package contents as described below. If any item is missing
Please contact your reseller.
Remove the label from the front panel carefully if present.
Page 3
2.2 Package contents
The following items are including in the received package:
2.3Connecting to the mains
3. Functions Description
4. Operation
4.1Photo
1) When the digital photo frame is powered on a slideshow of the pictures on
2) If no memory card is inserted, the screen will show the Calendar mode.
1 Digital photo frame
1 AC/DC adaptor+cable
1 Instruction manual
Connect the adaptor plug on the adaptor cable to the DC connection.
Connect the mains plug to a wall socket.
the inserted memory card or USB (if available) will start automatically. (The
screen will show initial screen, then go to calendar first and after 1-2
seconds going to slideshow the picture)
Page 4
3) DPF will start the picture slideshow when the USB flash with pictures is
inserted (same as SD card) and if the SD card or USB flash is insereted
4.2Calendar
4.3Set up setting
later , then also automatically start the presentation switching from the
calendar mode.
Select the calendar in the main menu.
Press the PLAY button (5) to enter the calendar of “Monthly Calendar”. ( if not
press play button, 15seconds after will going to slideshow picture)
Left screen display the calendar& date and right screen show the photos and
times.(please insert the card or USB device first and ensure have picture
inside it) Or press PLAY button to “Digital clock” left screen display clock &
date time and right screen show the photos too and press PLAY button again
to “Analog Clock” will just display analogy clock& time.
To enter the setting menu, press the PLAY button
To select a menu item, press the UP button or the DOWN button
To adjust a setting, press the LEFT and RIGHT button
To exit to the menu, press the Menu button.
4.3.1 Photo setup
Display Mode: Slideshow, Thumbnail,Browse mode
Slideshow mode
Select the Slideshow in the display mode.
Exit and return to main menu and press the PLAY button (5) to enter to the
PHOTO and then going to Slideshow picture. (after 15seconds will going to
automatically slideshow picture if not press PLAY button) (Effective with
inserted Card or USB).
Page 5
In slideshow model it displays picture automatically and also can press left or
right button to see the previous or next picture.
Thumbnail mode
Select the Thumbnail in the menu.
To exit the menu, return to main menu and press the PLAY button (5) to enter
the PHOTO and going to display the Thumbnail photos. (Effective with inserted
Card or USB)
15 pieces of thumbnail photos can be display in one page and will show the
picture information at bottom line.
Browse mode
Select the Browse mode in the menu.
Exit and return to main menu and press the PLAY Button (5) to enter to the
PHOTO (Effective with inserted Card or USB)
Just show the current picture if not press left & right button.
Display Ratio: Full Screen, Fit to Screen, Crop to Fill
Slide show time: 5Sec. 15Sec. 30.Sec. 60Sec. 5Min.15Min.
Slideshow Repeat: Repeat, Once,
Slideshow effect: Offers you following Options for the Transition between two
Photos: Random, Snake, Partition, Erase, Blinds, Random lines, Grid, Cross,
Rect, Spiral, Close
4.3.2Calendar Setup
Display Mode: Monthly Calendar, Digital clock, Analog Clock
Set Date: press the Left or Right button to change the date and year and press
the button of up and down to previous or next setup.
Clock Mode: 24hr, 12hr
Set time: press the Left or Right button to change the time and press the
button of up and down to previous or next setup.
Page 6
4.3.3 System Setup
5. Technical Data
Language: EN/CZ/SL/HU/PL
Backlight: Settings from 1-5
Brightness: Settings from 0-5
Contrast: Settings from 0-5
Saturation: Settings from 0-5
Power on: setting automatically turn on: ON/OFF
Auto boot time: setting auto turn on time
Power off: setting automatically turn off: ON/OFF
Auto Shut Time: setting auto turn off time
Auto-Power Frequency: Setting from Mon to Fri. Weekend, Once, Everyday
Default: Back to Factory settings
Version: Software version
System upgrade: Software update
ParameterValue
DPF voltage5V-1A
Power voltage100-240V/50-60Hz
USB connectionUSB 2.0 compatible
Flash memory connectionSD/MMC/MS
Supported media formatsJPEG
Screen size7”(17,8 cm)
Aspect ratio16 : 9
Resolution800*480 pixels
Brightness250 Cd/m2
Page 7
Contrast600 : 1
ENDisposal of Used Electrical & Electronic Equipment
The meaning of the symbol on the product, its accessory or
packaging indicates that this product shall not be treated as
household waste. Please, dispose of this equipment at your
applicablecollection pointfor therecyclingofelectrical& electronic
equipments waste. In the European Union and Other European countries
which there are separate collection systems for used electrical and electronic
product. By ensuring the correct disposal of this product, you will help
prevent potentially hazardous to the environment and to human health, which
could otherwise be caused by unsuitable waste handling of this product.
The recycling of materials will help conserve natural resources. Please do
not therefore dispose of your old electrical and electronic equipment with
your household waste. For more detailed information about recycling of this
product, please contact your local city office, your household waste disposal
service or the shop where you purchased the product.
This Product complies with basic relevant requirements of the EU Regulations.
Changes in design, technical specification are reserved and can be done
without notice.
Manufacturer : Fast CR, a.s., Černokostelecká 1621, CZ-251 01 Říčany
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.