Senco PW-2 User Manual
Wide-Crown Staplers MW & PW
The SENCOO MW and PW wide-crown staplers are lightweight and well-balanced, minimizing operator fatigue.
MW Applications:
For butt joining, insulation, and belt line attachment on
mobile homes. Asphalt or fiberglass shingle and felt
applications in building construction. Furniture assembly.
Corrugated to wood attachment in packaging.
Features:
• Drives 1” wide-crown staples 3/4” to 1-1/2” long
• Balanced 74 lb. weight reduces fatigue
• For asphalt and fiberglass shingle and reroofing applications
• Special wearplate and hardened safety
PW Applications:
Shingles, Lathing, Insulation, Belt Lines, Furniture/Cabinet
Frame, Butt-Joining, and Carton-To-Skid.
Features:
• High load capacity (140-plus staples)
• Lightweight (4.9 lbs.) for ease of handling
• Drives full I” wide-crown staples-exceeds CABO NER-270
code requirements by a full 1/16” (check your local code
requirements prior to use)
• Designed for fast loading, consistent flush driving
• EZ-Clear-virtually eliminates downtime caused by fastener
jams
• Special wearplate and hardened safety-resist granular
abrasion
Wide-Crown Staplers MW & PW
Tool Specifications:
MW
Tool Weight 74 lbs.
Height: 9-3/4 “
Length: 12-9/16"
Staple Capacity: 140+
Gauge: 16, in lengths from 3/4” to 1 –1/2”
Mode of operations: Available with either “Restrictive
Trigger” or
‘Dual Action” activating mechanism.*
Fastener Specifications:
P series staples
Crown: 1”(25.4 mm)
Width: .062” (1.6 mm)
Thickness: .055" (1.4 mm)
Gauge: .16
Length
Part No. P11BAA P12BAA P13BAA P15BAA P17BAA
Staples/Box 10,080 10,080 10,080 10,080, 10,080
Boxes/Carton 11111
Inches 3/4” 7/8” 1” 1-1/4” 1-1/2”
Millimeters 19 22 25 32 38
Tool Specifications:
PW
Tool Weight.- 4. 9 lbs.
Height 8-1/16"
Length: 12-1/2"
Lip Length: 1/4”
Staple Capacity: 140+
Mode of Operation: Available with either “Restrictive
Trigger” or
“Dual Action” activating mechanism. *
Max. Operating Pressure: 80- 100 p.s.i.g.
Fastener Specifications:
P series staples
Crown: 1” (25.4 mm)
Width: .062 “ (1. 6 mm)
Thickness: .55" (1.4 mm)
Gauge: .16
Lengths
Part No. P11BAA P12BAA P138AA P15BAA P17BAA
Staples/Box 10,080 10,080 10,080 10,080 10,080
Boxes/Carton 1 1 1 1 1
Inches 3/4” 7/8” 1” 1-1/4” 1-1/2”
Millimeters 19 22 25 32 38
* “Restrictive Trigger” activated tools are used for applications
where precision nail or staple placement is desired. You must first
depress the satiety element where you want to drive a nail or staple
and then pull the trigger After each nail or staple is driven,
completely release tile trigger and lift the tool off the work surface.
“Dual Action” activated tools are used for applications where highproduction work is desired. Them are two modes of operation:
1. Bottom Fire Method: This method of operation is sometimes
called bounce firing. You must keep the trigger pulled while moving
the tool along the work surface with a bouncing motion, depressing
the safety a element where you want to drive a nail or staple
2. Trigger Fire Method: First depress the safety element where you
want t 0 of Five a nail or staple and then pull the trigger
For instructions on safe use of tools with either of these activating
mechanisms please refer to the Operating Instructions or Customer
Satisfaction and Safety Reminder contained in your tool carton.
For additional information on how SENCO fastening systems will save you time, reduce costs, and increase quality, call your nearest Authorized SENCO
Dealer or Distributor listed in the Yellow Pages under “Staples, “ or call our toll-free Action Line: 1-800-543-4596.
©
2001 by Senco Products, Inc. Order MK301 Litho in U.S.A. Visit our web site: www.senco.com
Loading...